CP 4525 always want to get paper from TRAY ONE

Hi
We have a problem with our HP CP 4525 DN printer -
-The tray in the printing options is "Auto" and the paper size is "A4"
-On printing, the printer always stops and ask us to feed paper manually in tray one !
-We already have "A4" in tray two!
-It doesn't matter what paper size or type we set for tray one on the printer panel/web config.
-We have set the drivers option to use tray two - but some programs auto it to "Auto"
-The client PC's (Win7/64bit) is printservers and connected by the network
-We have also updated to the lastest driver (61.091.12.102)
-I do remember an older HP printer - there you could set "default" tray...
Its very annoying to always remember to manually change the tray !
This question was solved.
View Solution.

Hi Visard,
There are a couple of places that can be associated with the printer requesting that you manually load media in Tray 1. I would like to mention them and ask that you check these settings. If they are all correct, then we can dig in deeper.
1) Check Media Size that the Printer thinks is loaded in Tray 2:
Press the "Menu" key, then use the arrows to select "Paper Handling" then "Tray 2 Size". Since you have A4 loaded, it should show "A4". If it shows anything other than "A4", open the tray and adjust the Length and Width guides so that they are set to "A4", close the tray and check the menu again.
Please refer to:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01860406/c01860406.pdf
Chapter 6, Pages 92-100 discuss loading media.
If this is set to Custom or another media size and no other tray matches the job, the printer will prompt that the media be loaded in Tray 1.
2) Check the Manual Feed Setting
Press the "Menu" key, then use the arrows to select "Configure Device" then "Printing" then "Manual Feed". Make sure it is set to "Off".
Please refer to:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01860406/c01860406.pdf
Chapter 2, Page 20 Describes the Manual Feed setting.
It is this menu item that will cause all jobs to prompt for Manual Feeding. If it is set to "Off", you might try setting it to "On", then pack to "Off" Again.
3) Check the driver printing default
Right Click on the printer in "Devices and Printers", then left click "Printer Properties". Left Click the "Advanced" tab and then left click "Printing Defaults...". On the "Printing Shortcuts" tab, click on the shortcut or shortcuts that you use and make sure that "Paper Source" is not set to "Manually Feed in Tray 1". On the "Paper/Quality" tab make sure that Paper Source is not set to "Manually Feed in Tray 1".
Kazman
I am an HP Employee
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Similar Messages

HT4314 Hi I have clash of clans only Game Center on my iPhone and on my iPad and I want to get rid of the one on my iPad, on my iPhone it always comes up with 'would you like to use you town hall level 4' help!

Hi I have clash of clans only Game Center on my iPhone and on my iPad and I want to get rid of the one on my iPad, on my iPhone it always comes up with 'would you like to use you town hall level 4' help!

Please help me back my clash of clans game. I cant access my games. But im steel can visit. Please hepl me.

I have 3 computers. i want to get files from one to another. it doesn't work, i think it is a problem with the apple id?

i have 3 computers. i want to get files from one to another. it doesn't work, i think it is a problem with the apple id?

Roger:
Zugriffsrecht means Access Right according to the translators.
martinamm:
You can't do what you want with iCloud. You will need to setup remote access to your main computer with VPS or some similar remote access application. With VPS you have an application running on your main computer turning it into a server and an client app on your laptop so you can access it remotely. There are many such apps out there, some probably more feature filled than VPS. You might post in the system forum that you're running and ask there.
OT

I want to get data from only RESB table without loss of any deltas

i have to fetch the reservation details for the production orders.
we are using descrete manufacturing method to keep track the Work in process and cost .
for addition of components manually in the production order we can track thru change date i.e From AUFK table with field name AEDAT. for each time when we are adding the components the system will create a new line item In tableRESB-OBJNR(field)
i need very few fields from RESB table to be pulled into SAP BW.
how should i proceed creating a generic exractor without any loss of deltas.
i want to get data from only resb table into sap bw.
how should i proceed with Generice extractor with single table RESB and what would be the delta field . could any one throw some light .
all answers would be rewarded with points

I have few reports for BOM data is to be pull into bw
all the reports contain the same tables Mentione below
MAST- material to BOM LINK
STKO- BOM header
STPO- BOM ITEM
STAS- BOM ITEM SELECTION
how should i create ageneric datsource satisfying that all the data comes from these tables without fail of deltas,
my doubts.1. Do i have to create a separate data sources (generic) for all these individually and load into separate ODS'S AND CLUB THEM into single ODS further.?
if i create i dont know what should be delta field that has to be picked for each datasource
2. Do i have to create a view on all these tables and create a generic datasource.if created what would be the delta field i have to select.
could you pls let me know how should i pull the data without loosing any deltas
could you pls let me know the flow with delta fields mentioned
regards,
P

I don't no much, but I can follow instructions. How can I get my rental movie from my iPhone to my iPad.... And I've rentented another movie, now I want to get it from pc to iPad....help be much appreciated...

I don't know much, but I can follow instructions. How can I get my rental movie from my iPhone to my iPad.... And I've rented another movie, now I want to get it from pc to iPad....help be much appreciated...

Did you rent the film directly on the iPhone ? I've never rented films, but from : http://support.apple.com/kb/HT1415 :
You can move the rental between devices as many times as you wish during the rental period. However, the movie can only be played on one device at a time. If you rent a movie on an iPhone, iPad, iPod touch, or Apple TV, it is not transferable to any other device and you must watch it on that device.
If you've rented a film on your computer's iTunes then you should be able to sync it to your iPad from your computer's iTunes via the Movies tab that shows on the right-hand side of iTunes when you've selected the iPad 'device' on its left-hand side

Getting music from Real One player

Does anyone know how to get music from real one player into the ipod? I am an idiot when it comes to techy stuff, so now i've got a new nano, but I don't know how to extract music from realone player. I tried add file to library option, but that didn't work...
anybody with ideas? thanks so much!!!

Your iPod cannot play a Real-format file, nor can iTunes, so you'll have to convert it. There are no tools for Mac I know of that can directly convert a Real track, so you'll need to capture the output of Real Player using a utility such as Audio Hijack or Wiretap. Either of those utilities can save the captured audio in a format that iTunes can import and transfer to your iPod.
Hope this helps.

Hi, I just downloaded iBooks and I downloaded a book but i wanted to get the hunger games one and they dont Havre it so I erased the app and when I wanted to download another one it just says waiting and it does nothing , CAN YOU HELP ME!

Hi, I just downloaded iBooks and I downloaded a book but i wanted to get the hunger games one and they dont Havre it so I erased the app and when I wanted to download another one it just says waiting and it does nothing , CAN YOU HELP ME!

Don't know if there is an option make the download window stay up, but you can bring it back with Ctrl+J then right-click on the download to open the folder it was downloaded to.
* keyboard shortcuts -- http://dmcritchie.mvps.org/firefox/keyboard.htm
Where files get downloaded to is in your '''about:config''' settings.
* [http://kb.mozillazine.org/About:config About:config - MozillaZine Knowledge Base]
* [http://kb.mozillazine.org/About:config_entries About:config entries - MozillaZine Knowledge Base]
check out variables beginning browser.download.

Want to get data from java file

Hi,
I am creating a program using JBuilder. All is going fine but im having trouble reading data. Well, I want to read data from a java program which is in the same package of my program but when i wrote the command to read it i get a Exception saying:
"java.io.FileNotFoundException: dataControl2.java (The system cannot find the file specified)"
Below is the program i wrote to do this:
The hole point of my program is to get temporary stored data from my conrol program that stores the data and saves it to a file. This program needs to get the user name and password and if the password is enabled or not.
try {
FileInputStream fi = new FileInputStream("dataControl2.java");
ObjectInputStream oi = new ObjectInputStream(fi);
dataControl2 dat = (dataControl2) oi.readObject();
jTextField1.setText("" + dat.userName);
if (dat.usePassword == 1) {
jPasswordField1.setEditable(false);
usePassword = 1;
oi.close();
} catch (Exception e) {
jTextField1.setText("" + e.toString());
I understand that the file cant be found, that wasnt hard to work out, but the thing is that the file does exist so i think i have wrote me program wrong.
If you can see wat i have done wrong or wish to learn more about my query email me at:
[email protected]
or
[email protected]
Many Thanks,
Tom

well, i did that and this is what my program looks like now:
try {
File aFile = new File("dataControl2.java");
System.out.println("absolute path : " + aFile.getAbsolutePath());
FileInputStream fi = new FileInputStream(aFile);
ObjectInputStream oi = new ObjectInputStream(fi);
dataControl2 dat = (dataControl2) oi.readObject();
jTextField1.setText("" + dat.userName);
if (dat.usePassword == 1) {
jPasswordField1.setEditable(false);
usePassword = 1;
oi.close();
} catch (Exception e) {
jTextField1.setText("" + e.toString());
System.out.println("");
System.out.println("" + e);
Well, now i get a message saying that the file is corrupted.
I have really screwed this up but i really need to get this fixed.
If possible i can zip my java program and send it to you if you ask!
tom

HT4906 i have icloud on my mac and iPad. I took pictures, downloaded them to my ipad and backed them up on the iPad. I want to get them from the cloud to my mac. I go to system preferences, iCloud and see that photo stream is greyed out. it says I n

I have photos on my ipad and backed up to the icloud. I go to try to get them from the icloud to my mac pro and it says I need iphoto updatte, but when I go to update iphote it says no update available. what do I do to get my photos onto my computer from icloud

this article explains how to set it up and describes the requirements for different features
http://www.apple.com/icloud/setup/
LN

When you want to get away from programming Java...

Wow, what week, Just curious to know, what do others do to wind-down or get away from programming? PC Games, reading, outdoor stuff? Myself, I am interested in purchasing either NeverWinter Nights or WarCraft III as another way to make "computers fun" again...
(Plus, any PC Game suggestions are welcomed.)
Thanks for reading this post!
--Todd

If you're into RPG's, my favorite is Wizardry 8. Great plot, characters, and world. Dated graphics. I do like having a full party and 1st person perspective. I've been playing a lot of Grand Theft Auto (Vice City)--sort of a first person driver/shooter with RPG elements.

Tutorial: Print index cards without removing paper from tray for Officejet Pro 8000.

The HP Officejet Pro 8000 and Officejet Pro 8000 wireless do not have a slot for inserting index cards and envelopes.
If you are wanting to print index cards without removing the paper from the tray, follow these steps.
The steps below are for 3 x 5 index cards.
1.) Open Microsoft Word
2.) Go to the Insert tab and insert a rectangle shape
3.) Draw a rectangle of any size
4.) Right click on the rectangle and select "Format Autoshape..."
5.) Under the Size tab, enter 5" for the height and 3" for the width (make sure "Absolute" is selected)
6.) Under the Layout tab, select "Center" for the horizontal alignment
7.) Click OK
8.) Use the keyboard up arrow key to move the rectangle to the top of the page. Make sure the top edge of the rectangle touches the top edge of the document.
9.) Print this document on plain 8.5" x 11" paper
10.) When you want to print an index card, place this 8.5x11 document in the paper tray printed side face up. Then place an index card over the rectangle and align with the border of the rectangle. After you print the index card, remove the 8.5x11 paper for the next time you need to print an index card.
Note 1: This are USA instructions. If you live in the UK or other countries you may have different paper size standards.

I can't tell you how much I HATE this printer. I will never buy an HP product again. BROTHERS printers are simply and easy to use.

Button or keystroke to get email from just one account?

To help filter out spam more (Apple Mail's junk filtering, SpamSieve and my provider's SpamAssassin just don't seem to be up to the task any more) I'm trying to retrieve all my email via Gmail and then POP download from Gmail. Gmail's spam filter seems to be the best so far.
I have 4 email accounts in Apple Mail, and I don't want to disable them all, because I want to be able to send from those accounts, refer to the old mailboxes, etc.
The Get mail button, though, retrieves from all the POP accounts, which defeats the purpose of having Gmail retrieve my POP email for me from those accounts, if I check email all the time, which I do.
Unchecking the "include this account when checking email automatically" doesn't help because I check for mail manually.
So I was wondering - is there a way of putting the menu item "get email from Gmail" onto the menu bar? Or if that is not possible, is it possible to make a keystroke just to check Gmail mail?
Thanks!
doug

I had CMD+G set to check my Gmail POP account. It's been working fine for several days now, ever since I set it. But suddenly the keystroke setting has disappeared from the Mail menu.
It's still in the keyboard shortcut preference panel.
I tried setting it to something else and restarting Mail, but the shortcut doesn't appear anymore!
Any idea what happened and what I need to do so I can set the shortcut again?
Thanks,
doug

HP Laserjet P2055dn doesnt take paper from tray 2

Problem is with a P2055dn printer, it incorrectly thinks there are no paper at tray2. It says "load paper"
The situation is as such when:
There is more than 10 papers and less than ab 1.5cm stack of papers. The "sticky roller" that should take the paper from the tray seems to roll and makes a scrieking noise, then it stops and says "load paper". If there is more or less paper the printer works fine.

Hi jonsed77,
Welcome to the HP Consumer Printer Forums.
According to the Specs for this printer, it only has one paper tray (and an automatic document feeder).
Paper handling
150-sheet input tray, 35-sheet automatic document feeder
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Officejet Pro 8500 Premier: How do I force the Copy function to use paper from Tray 2?

I set the default tray to Tray 2 and locked Tray 1 to protect my envelopes and this works fine when printing from the computer. But when I copy a document using the START COPY button, the printer pulls from Tray 1 and complains about the media being the wrong size.
When I use the printers control panel to set the Copy function to use Tray 2, it resets itself to Tray 1 the next time I copy something.
Surely I am not the only one in the Universe who would want to configure my printer to do this.
Has anyone else out there tried this?
Also, is there a specific forum for the Officejet Pro 8500 series printers?

Hi
Hope you're still checking this
I had the same problem but found that if you go to the copy menu through the touchscreen, change the tray to tray 2 and then scroll to the very bottom there is an option to "Set as new default". This also changes the default for the Start Copy buttons - at least it did for me anyway.
Good luck

930c Won't pick up paper from tray

Hello,
My Deskjet 903c won't pick up the paper from the tray. Help?
Thank you.
Dan

Dan,
I have a different model, but the same problem. Here is a link I found that fixed my problem, complete with video how to. You might be able to find a similiar link for yours.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02036357&tmp_task=solveCategory&lc=en&dlc=en&cc...
Tom

CP 4525 always want to get paper from TRAY ONE

Similar Messages

Maybe you are looking for