CP 7 Bug? Long delay between preloader and first slide
I am using OSX Mavericks 10.9.2 and recenly created my first project since upgrading to CP 7. My project is 15 slides and contains only audio (mp3) and image files. My preloader is set to 25%. When I upload the published project to my web server and test, there is a fairly long delay after the preloader loads and before the course begins. It last several seconds and appears as if all the elements on the first slide are missing (the only thing that shows is the playbar - I have only the CC button turned on):
Is this a bug with CP 7? I have never experienced anything like this in CP 5.5 and 6.
jon8979 wrote:
During the latter part of the sync, I can open the Music app and scroll down to find the first last Artist with more songs than albums, and that is the one the device is currently working on.
That should have been the "last" Artist, not "first". I would've edited the message, but I guess I'm too late as the option isn't available.
Similar Messages
-
Long delay between send button and actual send in mail
When sending messages in mail, there is a long delay between the time I hit the send button and the actual sending begins. Message and attachment size have no bearing. The delay is usually about 30 seconds, but sometimes longer.
There was info in the detail window when I opened it. Also, it was not immediately connecting to the server, but when I clicked back on the regular mail window to send a test message, the server connected instantly. Below is all that was in the details window:
CONNECTED Jan 19 11:45:53.387 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x1032788a0
READ Jan 19 11:45:53.601 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x1032788a0
* OK [CAPABILITY st11p00mm-iscream023 1M XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 SASL-IR AUTH=ATOKEN AUTH=PLAIN] iSCREAM ready to rumble (1M:12460) st11p00mm-iscream023
WROTE Jan 19 11:45:53.756 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46d52ec20
1.39 AUTHENTICATE ATOKEN MTY2MDIwMDk3ADE2NjAyMDA5NwBBUUFBQUFCUSt2ZmVHNVNBMGNLbDBsRElwQkdkc0hXNk9mdnFNVWM 9
READ Jan 19 11:45:53.844 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46d52ec20
1.39 OK [CAPABILITY XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 ACL QUOTA LITERAL+ NAMESPACE UIDPLUS CHILDREN BINARY UNSELECT SORT CATENATE URLAUTH LANGUAGE ESEARCH ESORT THREAD=ORDEREDSUBJECT THREAD=REFERENCES CONDSTORE ENABLE CONTEXT=SEARCH CONTEXT=SORT WITHIN SASL-IR SEARCHRES XSENDER X-NETSCAPE XSERVERINFO X-SUN-SORT ANNOTATE-EXPERIMENT-1 X-UNAUTHENTICATE X-SUN-IMAP X-ANNOTATEMORE XUM1 ID IDLE] User jfbohn1 logged in
WROTE Jan 19 11:45:53.857 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46bd56e40
2.39 ID ("name" "Mac OS X Mail" "version" "5.3 (1283)" "os" "Mac OS X" "os-version" "10.7.5 (11G63)" "vendor" "Apple Inc.")
READ Jan 19 11:45:53.925 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46bd56e40
* ID NIL
2.39 OK Completed
WROTE Jan 19 11:45:53.929 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46be61a30
3.39 LIST "" ""
READ Jan 19 11:45:53.996 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46be61a30
* LIST (\Noselect) "/" ""
3.39 OK Completed
WROTE Jan 19 11:45:54.002 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46bd56e40
4.39 LOGOUT
CONNECTED Jan 19 12:33:43.623 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46edb9cd0
READ Jan 19 12:33:43.837 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46edb9cd0
* OK [CAPABILITY st11p00mm-iscream029 1M XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 SASL-IR AUTH=ATOKEN AUTH=PLAIN] iSCREAM ready to rumble (1M:4364) st11p00mm-iscream029
WROTE Jan 19 12:33:43.995 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46ea98e90
1.43 AUTHENTICATE ATOKEN MTY2MDIwMDk3ADE2NjAyMDA5NwBBUUFBQUFCUSt2ZmVHNVNBMGNLbDBsRElwQkdkc0hXNk9mdnFNVWM 9
READ Jan 19 12:33:44.088 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46ea98e90
1.43 OK [CAPABILITY XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 ACL QUOTA LITERAL+ NAMESPACE UIDPLUS CHILDREN BINARY UNSELECT SORT CATENATE URLAUTH LANGUAGE ESEARCH ESORT THREAD=ORDEREDSUBJECT THREAD=REFERENCES CONDSTORE ENABLE CONTEXT=SEARCH CONTEXT=SORT WITHIN SASL-IR SEARCHRES XSENDER X-NETSCAPE XSERVERINFO X-SUN-SORT ANNOTATE-EXPERIMENT-1 X-UNAUTHENTICATE X-SUN-IMAP X-ANNOTATEMORE XUM1 ID IDLE] User jfbohn1 logged in
WROTE Jan 19 12:33:44.093 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46d229320
2.43 ID ("name" "Mac OS X Mail" "version" "5.3 (1283)" "os" "Mac OS X" "os-version" "10.7.5 (11G63)" "vendor" "Apple Inc.")
READ Jan 19 12:33:44.162 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46d229320
* ID NIL
2.43 OK Completed
WROTE Jan 19 12:33:44.167 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46d229320
3.43 LIST "" ""
READ Jan 19 12:33:44.235 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46d229320
* LIST (\Noselect) "/" ""
3.43 OK Completed
WROTE Jan 19 12:33:44.241 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46ea98e90
4.43 LOGOUT
CONNECTED Jan 19 12:34:12.742 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46d2e4d20
READ Jan 19 12:34:12.957 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46d2e4d20
* OK [CAPABILITY st11p00mm-iscream020 1M XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 SASL-IR AUTH=ATOKEN AUTH=PLAIN] iSCREAM ready to rumble (1M:32403) st11p00mm-iscream020
WROTE Jan 19 12:34:13.116 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46edc5c40
1.44 AUTHENTICATE ATOKEN MTY2MDIwMDk3ADE2NjAyMDA5NwBBUUFBQUFCUSt2ZmVHNVNBMGNLbDBsRElwQkdkc0hXNk9mdnFNVWM 9
READ Jan 19 12:34:13.204 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46edc5c40
1.44 OK [CAPABILITY XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 ACL QUOTA LITERAL+ NAMESPACE UIDPLUS CHILDREN BINARY UNSELECT SORT CATENATE URLAUTH LANGUAGE ESEARCH ESORT THREAD=ORDEREDSUBJECT THREAD=REFERENCES CONDSTORE ENABLE CONTEXT=SEARCH CONTEXT=SORT WITHIN SASL-IR SEARCHRES XSENDER X-NETSCAPE XSERVERINFO X-SUN-SORT ANNOTATE-EXPERIMENT-1 X-UNAUTHENTICATE X-SUN-IMAP X-ANNOTATEMORE XUM1 ID IDLE] User jfbohn1 logged in
WROTE Jan 19 12:34:13.211 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46d56a3d0
2.44 ID ("name" "Mac OS X Mail" "version" "5.3 (1283)" "os" "Mac OS X" "os-version" "10.7.5 (11G63)" "vendor" "Apple Inc.")
READ Jan 19 12:34:13.280 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46d56a3d0
* ID NIL
2.44 OK Completed
WROTE Jan 19 12:34:13.287 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46ed7ba30
3.44 LIST "" ""
READ Jan 19 12:34:13.355 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46ed7ba30
* LIST (\Noselect) "/" ""
3.44 OK Completed
WROTE Jan 19 12:34:13.363 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46d56a3d0
4.44 LOGOUT
CONNECTED Jan 19 12:34:58.696 [kCFStreamSocketSecurityLevelNone] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
READ Jan 19 12:34:58.763 [kCFStreamSocketSecurityLevelNone] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
220 st11p02mm-asmtp003.mac.com -- Server ESMTP (Oracle Communications Messaging Server 7u4-24.01(7.0.4.24.0) 64bit (built Jan 3 2012))
WROTE Jan 19 12:35:28.779 [kCFStreamSocketSecurityLevelNone] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
EHLO [192.168.1.30]
READ Jan 19 12:35:28.846 [kCFStreamSocketSecurityLevelNone] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
250-st11p02mm-asmtp003.mac.com
250-8BITMIME
250-PIPELINING
250-CHUNKING
250-DSN
250-ENHANCEDSTATUSCODES
250-EXPN
250-HELP
250-XADR
250-XSTA
250-XCIR
250-XGEN
250-XLOOP 9DDFE32F5FFD44C1C6F842687D47D955
250-STARTTLS
250-NO-SOLICITING
250 SIZE 0
WROTE Jan 19 12:35:28.851 [kCFStreamSocketSecurityLevelNone] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
STARTTLS
READ Jan 19 12:35:28.917 [kCFStreamSocketSecurityLevelNone] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
220 2.5.0 Go ahead with TLS negotiation.
WROTE Jan 19 12:35:29.288 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
EHLO [192.168.1.30]
READ Jan 19 12:35:29.355 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
250-st11p02mm-asmtp003.mac.com
250-8BITMIME
250-PIPELINING
250-CHUNKING
250-DSN
250-ENHANCEDSTATUSCODES
250-EXPN
250-HELP
250-XADR
250-XSTA
250-XCIR
250-XGEN
250-XLOOP 9DDFE32F5FFD44C1C6F842687D47D955
250-AUTH PLAIN LOGIN ATOKEN WSTOKEN WETOKEN
250-AUTH=LOGIN PLAIN
250-NO-SOLICITING
250 SIZE 0
WROTE Jan 19 12:35:29.363 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
EHLO [192.168.1.30]
READ Jan 19 12:35:29.429 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
250-st11p02mm-asmtp003.mac.com
250-8BITMIME
250-PIPELINING
250-CHUNKING
250-DSN
250-ENHANCEDSTATUSCODES
250-EXPN
250-HELP
250-XADR
250-XSTA
250-XCIR
250-XGEN
250-XLOOP 9DDFE32F5FFD44C1C6F842687D47D955
250-AUTH PLAIN LOGIN ATOKEN WSTOKEN WETOKEN
250-AUTH=LOGIN PLAIN
250-NO-SOLICITING
250 SIZE 0
WROTE Jan 19 12:35:29.539 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
AUTH ATOKEN MTY2MDIwMDk3ADE2NjAyMDA5NwBBUUFBQUFCUSt2ZmVHNVNBMGNLbDBsRElwQkdkc0hXNk9mdnFNVWM 9
READ Jan 19 12:35:29.618 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
235 2.7.0 ATOKEN authentication successful.
WROTE Jan 19 12:35:29.628 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
MAIL FROM:<****>
READ Jan 19 12:35:29.700 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
250 2.5.0 Address Ok.
WROTE Jan 19 12:35:29.708 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
RCPT TO:<****>
READ Jan 19 12:35:29.912 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
250 2.1.5 **** OK.
WROTE Jan 19 12:35:29.921 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
DATA
READ Jan 19 12:35:29.986 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
354 Enter mail, end with a single ".".
WROTE Jan 19 12:35:29.995 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
From: John Bohn <****>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Subject: test server
Date: Sat, 19 Jan 2013 12:34:58 -0800
Message-Id: <****>
To: John Bohn <****>
Mime-Version: 1.0 (Apple Message framework v1283)
X-Mailer: Apple Mail (2.1283)
asdfs
READ Jan 19 12:35:30.197 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
250 2.5.0 Ok, envelope id ****
<Email Edited By Host> -
when I connect my electric acoustic through an audio jack to usb there is a delay between playing and recording. Can this be overcome?
Hi johnbwebster,
Welcome to the Support Communities!
The Logic Express 9 Manual shows how to Adjust the "Recording Delay" in the Audio Preferences:
Click on the link below for more information and screen shots:
Logic Express 9 User Manual: Audio Preferences in Logic Express
https://documentation.apple.com/en/logicexpress/usermanual/index.html#chapter=43 %26section=4%26tasks=true
Cheers,
- Judy -
V$dataguard_stats showing 8 hrs delay between Primary and standby
Hello All,
My Primary and standby database are in sync but v$dataguard_stats on standby server showing 8 hrs delay between Primary and standby.
DB Version:11.2.0.1.0
Server :AIX
Primary:
SQL> select /*+ FULL(c) PARALLEL(c, 35) */ distinct SEQUENCE# "Last Sequence Generated" FROM V$ARCHIVED_LOG c WHERE (THREAD#,FIRST_TIME ) IN (select /*+ FULL(c) PARALLEL(c, 35) */ THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG c GROUP BY THREAD#);
Last Sequence Generated
4521
Standby:
SQL> SELECT APPL.SEQUENCE# "Last Sequence Applied"
FROM (SELECT THREAD# ,SEQUENCE# FROM V$ARCHIVED_LOG WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG GROUP BY THREAD#)) ARCH,
2 3 (SELECT THREAD# ,SEQUENCE# FROM V$LOG_HISTORY WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$LOG_HISTORY GROUP BY THREAD#)) APPL
4 WHERE ARCH.THREAD# = APPL.THREAD#;
Last Sequence Applied
4521
SQL> SELECT ARCH.THREAD# "Thread", ARCH.SEQUENCE# "Last Sequence Received", APPL.SEQUENCE# "Last Sequence Applied", (ARCH.SEQUENCE# - APPL.SEQUENCE#) "Difference"
2 FROM (SELECT THREAD# ,SEQUENCE# FROM V$ARCHIVED_LOG WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG GROUP BY THREAD#)) ARCH,
3 (SELECT THREAD# ,SEQUENCE# FROM V$LOG_HISTORY WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$LOG_HISTORY GROUP BY THREAD#)) APPL
WHERE ARCH.THREAD# = APPL.THREAD#;
4
Thread Last Sequence Received Last Sequence Applied Difference
1 4521 4521 0
SQL> select name, 'Hours', to_number(substr(value,5,2)) from v$dataguard_stats where name = 'apply lag' ;
NAME 'HOUR TO_NUMBER(SUBSTR(VALUE,5,2))
apply lag Hours 8------------------------------------------------------------------>>>Problem areaSQL> SELECT status, error
FROM V$ARCHIVE_DEST_STATUS
WHERE STATUS <> 'DEFERRED' AND STATUS <> 'INACTIVE'; 2 3
STATUS ERROR
VALID
VALID
Standby--Generally in Night it happens that primary and standby 'apply lag' is 8/10/4 hrs .When manually checked database are in sync but v$dataguard_stats showing difference in hrs
NAME 'AL
SUBSTR(VALUE,1,12)
apply lag ALL
+00 04:11:03
SQL> SQL> 2
NAME 'SECOND TO_NUMBER(SUBSTR(VALUE,11,2))
apply lag Seconds 3
SQL> SQL> 2
NAME 'MINUTE TO_NUMBER(SUBSTR(VALUE,8,2))
apply lag Minutes 11
SQL> SQL> 2
NAME 'HOUR TO_NUMBER(SUBSTR(VALUE,5,2))
apply lag Hours 4
SQL> SQL> 2
NAME 'DAY TO_NUMBER(SUBSTR(VALUE,2,2))
apply lag Days 0 -
Experiencing Delay Between Midi and Audio MOTU 828 Mk1
Hi everyone
Wondering if somebody can point me in the right direction. I'm using an Intel iMac running Leopard 10.5.8 and Logic 8. I just got hold of a MOTU 828 MkI and am experiencing a severe delay between midi and audio.
Clock source is set to internal in the 828 settings and sample rate is set at 44100, so that's all as it should be.
I'm at a loss has anybody got any ideas?
Many thanks.Hi,
I assume MIDI is earlier than audio.
Do You have plugins in busses and or master outputs?. Try to disable them and see if that still happens.
Here I had issues with 9.01 that aren`t plugin related and had to reboot to solve it. I upgraded to 9.02 and didn`t see them again (yet.)
If you HAVE to have your plugins in the busses and master and still want to have your MIDI properly aligned... Well you´re asking too much, my friend. Write a polite letter to Apple telling them if they´re joking calling Pro to this app that can´t keep two basic features in sync. BTW: same happens with video (at leat in L8. Didn`t check 9 with that yet)
After that, breath deeply and use the input objects to route your midi instruments inside Logic. Then they´ll be in sync, but at the price of loosing all their analog warm. Weird, isn´t it? -
What is the difference between Preload and Precompile
Hi,
Can anyone tell me the difference in between Preload and Precopile.
Thanks.
Regards,
ThanigaiPrecompile is the generation of the servlet code and the compilation of it before starting up the server.
preload is loading certain servlets (or generated servlets) into the memory so they can be accessed faster. -
Whats the difference between ALL and FIRST in Multi Inserting
SQL> Drop Table Sales;
Table dropped.
SQL> Drop Table Accounts;
Table dropped.
SQL> Drop Table Research;
Table dropped.
SQL> Create Table Sales As Select * From Emp;
Table created.
SQL> Create Table Accounts As Select * From Emp;
Table created.
SQL> Create Table Research As Select * From Emp;
Table created.
SQL> Truncate Table Sales;
Table truncated.
SQL> Truncate Table Accounts;
Table truncated.
SQL> Truncate Table Research;
Table truncated.
SQL> Select * From Sales;
no rows selected
SQL> Select * From Accounts;
no rows selected
SQL> Select * From Research;
no rows selected
SQL> Insert All
2 When Deptno=10 Then
3 Into Sales (Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,DeptNo)
4 When Deptno=20 Then
5 Into Accounts (Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,DeptNo)
6 When Deptno=30 Then
7 Into Research (Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,DeptNo)
8 Select * From Emp
9 .
SQL> /
16 rows created.
SQL> Select * From Sales;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7782 CLARK MANAGER 7839 09-JUN-81 100 10
7839 KING PRESIDENT 17-NOV-81 100 10
7934 MILLER CLERK 7782 23-JAN-82 100 10
7999 ABCDEFGH JOB 7839 09-FEB-06 100 0 10
4 rows selected.
SQL> Select * From Accounts;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7901 SMITH CLERK 7902 17-DEC-80 100 20
7566 JONES MANAGER 7839 02-APR-81 100 20
7788 SCOTT ANALYST 7566 19-APR-87 100 20
7876 ADAMS CLERK 7788 23-MAY-87 100 20
7902 FORD ANALYST 7566 03-DEC-81 100 20
123 20
6 rows selected.
SQL> Select * From Research;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7499 ALLEN SALESMAN 7698 20-FEB-81 100 300 30
7521 WARD SALESMAN 7698 22-FEB-81 100 500 30
7654 MARTIN SALESMAN 7698 28-SEP-81 100 1400 30
7698 BLAKE MANAGER 7839 01-MAY-81 100 30
7844 TURNER SALESMAN 7698 08-SEP-81 100 0 30
7900 JAMES MANAGER 7698 03-DEC-81 100 30
6 rows selected.
SQL> Truncate Table Sales;
Table truncated.
SQL> Truncate Table Accounts;
Table truncated.
SQL> Truncate Table Research;
Table truncated.
SQL> Insert First
2 When Deptno=10 Then
3 Into Sales (Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,DeptNo)
4 When Deptno=20 Then
5 Into Accounts (Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,DeptNo)
6 When Deptno=30 Then
7 Into Research (Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,DeptNo)
8 Select * From Emp
9 /
16 rows created.
SQL> Select * From Sales;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7782 CLARK MANAGER 7839 09-JUN-81 100 10
7839 KING PRESIDENT 17-NOV-81 100 10
7934 MILLER CLERK 7782 23-JAN-82 100 10
7999 ABCDEFGH JOB 7839 09-FEB-06 100 0 10
4 rows selected.
SQL> Select * From Accounts;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7901 SMITH CLERK 7902 17-DEC-80 100 20
7566 JONES MANAGER 7839 02-APR-81 100 20
7788 SCOTT ANALYST 7566 19-APR-87 100 20
7876 ADAMS CLERK 7788 23-MAY-87 100 20
7902 FORD ANALYST 7566 03-DEC-81 100 20
123 20
6 rows selected.
SQL> Select * From Research;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7499 ALLEN SALESMAN 7698 20-FEB-81 100 300 30
7521 WARD SALESMAN 7698 22-FEB-81 100 500 30
7654 MARTIN SALESMAN 7698 28-SEP-81 100 1400 30
7698 BLAKE MANAGER 7839 01-MAY-81 100 30
7844 TURNER SALESMAN 7698 08-SEP-81 100 0 30
7900 JAMES MANAGER 7698 03-DEC-81 100 30
6 rows selected.Both inserting insert the same records then whats the difference between ALL and FIRST clause in multi insert DML
Khurram Siddiqui
[email protected]Hello
From the docs:
ALL
If you specify ALL, then Oracle evaluates each WHEN clause regardless of the results of the evaluation of any other WHEN clause. For each WHEN clause whose condition evaluates to true, Oracle executes the corresponding INTO clause list.
FIRST
If you specify FIRST, then Oracle evaluates each WHEN clause in the order in which it appears in the statement. For the first WHEN clause that evaluates to true, Oracle executes the corresponding INTO clause and skips subsequent WHEN clauses for the given row.
ELSE clause
For a given row, if no WHEN clause evaluates to true:
* If you have specified an ELSE clause, then Oracle executes the INTO clause list associated with the ELSE clause.
* If you did not specify an else clause, then Oracle takes no action for that row.
See Also:
"Multitable Inserts: Examples"
Restrictions on Multitable Inserts
* You can perform multitable inserts only on tables, not on views or materialized views.
* You cannot perform a multitable insert into a remote table.
* You cannot specify a table collection expression when performing a multitable insert.
* In a multitable insert, all of the insert_into_clauses cannot combine to specify more than 999 target columns.
* Multitable inserts are not parallelized in a Real Application Clusters environment, or if any target table is index organized, or if any target table has a bitmap index defined on it.
* Plan stability is not supported for multitable insert statements.
* The subquery of the multitable insert statement cannot use a sequence.
So given this the following example shows the difference:
SQL> CREATE TABLE dt_test_insert_base as select rownum id from dba_objects where rownum <=20
2 /
Table created.
SQL> CREATE TABLE dt_test_insert_1 (id number)
2 /
Table created.
SQL> CREATE TABLE dt_test_insert_2 (id number)
2 /
Table created.
SQL>
SQL> INSERT ALL
2 WHEN rownum <=15 THEN
3 INTO dt_test_insert_1 (id)
4 WHEN rownum >=10 THEN
5 INTO dt_test_insert_2 (id)
6 SELECT
7 ID
8 FROM
9 dt_test_insert_base
10 /
26 rows created.
SQL>
SQL> SELECT * from dt_test_insert_1
2 /
ID
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
15 rows selected.
SQL> SELECT * from dt_test_insert_2
2 /
ID
10
11
12
13
14
15
16
17
18
19
20
11 rows selected.
SQL>
SQL> TRUNCATE TABLE dt_test_insert_1
2 /
Table truncated.
SQL> TRUNCATE TABLE dt_test_insert_2
2 /
Table truncated.
SQL>
SQL> INSERT FIRST
2 WHEN rownum <=15 THEN
3 INTO dt_test_insert_1 (id)
4 WHEN rownum >=10 THEN --This condition is ignored until the value of id is > 15
5 INTO dt_test_insert_2 (id)
6 SELECT
7 ID
8 FROM
9 dt_test_insert_base
10 /
20 rows created.
SQL> SELECT * from dt_test_insert_1
2 /
ID
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
15 rows selected.
SQL> SELECT * from dt_test_insert_2
2 /
ID
16
17
18
19
20HTH
David -
Blank screen between preloader and beginning of SWF movie
I'm having a problem with a published SWF. A long lag time is occurring between the end of my AS3 preloader and the beginning of my SWF movie. Once the preloader disappears, the SWF screen goes blank for up to 10 seconds before the movie begins. I've monitored the SWF's download progress using Firebug, and the preloader disappears once 45% of the SWF has been downloaded, as is to be expected. But the movie does not begin until most of the SWF has been downloaded, which causes the 10 seconds of blank screen. After reading some blog posts, I suspected that the audio embedded in the Captivate presentation was causing the SWF to download all of the audio before starting the movie. I followed recommendations to add a tiny amount of silence the beginning of each slide, but it hasn't resolved the problem.
Does anyone know how to fix a long lag time between a preloader and movie? My SWF settings and other details are below. Thanks in advance.
- Using Captivate 5
- The presentation has 18 slides. Each slide has one JPG and one audio clip. (The audio clips were imported one at a time, instead of importing one large audio file and having Captivate spread it across multiple slides.)
- Each slide is .4 seconds longer than its audio clip, leaving .2 seconds of silence before and after the audio clip.
- SWF Size and Quality are set to Low
- Audio Quality is set to MP3, 64Kbps, 44.100 KHz
- Using AS3 preloader set to 45%
- The SWF is hosted on a web server and is viewed via the htm file that is generated when the SWF is published.
KimHi Vikranth,
Thanks for your help. The online SWF is here:
http://leo.lincolninst.edu/eTeach/captivate-tests/inside-focus-area/new-opt-img-mp3-chunks -full-2/inside-focus-area-new-opt-img.htm
I've also posted the same SWF with a 15% preloader here (the smaller the preloader percentage, the longer the blank screen):
http://leo.lincolninst.edu/eTeach/captivate-tests/inside-focus-area/new-opt-img-mp3-chunks -full-2-15/inside-focus-area-new-opt-img.htm
I've sent the cptx file to your email address.
Kim -
Home Sharing no longer works between iTunes and Apple TV.
I've been through all the forums, tried all the solutions provided and I have come to the conclusion that Home Sharing just no longer works between iTunes on a PC and my Apple TV. Does anyone know if this issue will be addressed or should I list my Apple TV up on eBay? (along with my iPad, iPod, and iPhone, since all system no longer sync together as before.)
My issue:
My iTunes library is no longer listed under "Computers" on the Apple TV.
The airplay icon no longer shows up in iTunes. (Version 11)
I cannot play music/content from my iPhone or iPad via remote that is stored in my iTunes library through my Apple TV.
I can however play music/content that is stored locally on my iPhone and iPad through my Apple TV.
My firewall settings are allowing access to Apple TV.
After logging into my router, I see no issues there.
I've logged in/out, turned home sharing on/off, de-authorized/authorized, and restarted my PC, Apple TV, and Router.
All devices are logged into the same iTunes account, and are on the same wireless network.
Time for a solution Apple.If you turn off wifi on your Computer and connect it to the apple tv using an ethernet cable can you see your library under computers in Apple TV.
If yes the issue is with your wifi not the Apple TV
You may want to try the troubleshooting article
I also found this article
iTunes Home Sharing Not Working
Not working and sometimes when it is working, it cuts out in the middle, or when you click on the computer name, the focus goes away from the library. In other words, really weird.
What it is
iTunes has a feature called "Home Sharing" - it basically allows you to share your entire or part of your library with other instances of iTunes in your home network. It requires you to login to your iTunes account on both computers. A typical scenario is to enable Home Sharing on your desktop machine and then access the library from your iPad, Apple TV, iPhone, Mac, etc.
In my case, I have iTunes on my desktop machine running Windows XP in the attic with Home Sharing enabled and then I access the library from my Macbook and Apple TV, depending on what I want. How to use Home Sharing can be found here.
Symptoms
Home Sharing machine not showing up in Apple TV or the Macbook
The Macbook home sharing not showing up on my desktop
Home Sharing working intermittently
Connections getting cut of intermittently
Usually, restarting iTunes or the desktop computer will make things work.
Sometimes, restarting the Macbook or the Apple TV will make things work.
The "working" doesn't last long
The FixOn the desktop computer where the Home Sharing is enabled, I disabled the "QoS Packet Scheduler" from the network connection:
Open Control Panel
Open Network Connections
Right-Click on your connection (in my case, it was "Wireless Network Connection 4"
Select Properties
Uncheck "QoS Packet Scheduler"
Click OK
Restart iTunes if necessary
After doing the above, Home Sharing worked like a charm. -
Is it a Bug? Integration between Dreamweaver and Fireworks is broken in somewhere?
I can not upload images related my topic here but you can see
it in the same topic at
http://www.fireworksguruforum.com/index.php?showtopic=14282
I use CS3 Suite. It is a big trouble for me in working on
real pages. Integration is broken in somewhere else and after that
point it becomes impossible to work on Fireworks through
Dreamweaver.
I've made test to show this trouble and I narrowed the
problem to the pictures as shown in the figures below,
1) In figure one I am creating a completely new Fireworks
file as arrow.png with two frames and one slice in it. After I am
saving it as .png I am exporting it as .html with images in /images
subfolder.
2) After saving and closing the file in Fireworks, in figure
two, I am opening the html in Dreamweaver and changing the page
properties by writing zeros to page margins and by changing the
default font.
-----I guess in this point something happens which breaks the
integration between FW and DW--------because;
3) In figure three I am opening the .png through Dreamweaver
(by "Edit") and changes the place and size of the slice a little
bit
4) When I press Done in Fireworks I see this picture in
figure four in Dreamweaver which shows integration between FW and
DW about table structure is broken. (In this point if I add any
behaviur to the slice DW doesn't recognize it, or any other change
in FW can not be recognized by DW)
5) In order to show this broken integration in table
sturucture, I am putting a new slice to png when Editing from DW in
FW.
6) When I click on Done in DW I see this picture on the
figure six. Beacuse FW doesn't have any effect on html's table
structure code.
I can not upload images related my topic here but you can see
it in the same topic at
http://www.fireworksguruforum.com/index.php?showtopic=14282damlays wrote:
> I can not upload images related my topic here but you
can see it in the same
> topic at
>
http://www.fireworksguruforum.com/index.php?showtopic=14282
>
>
> I use CS3 Suite. It is a big trouble for me in working
on real pages.
> Integration is broken in somewhere else and after that
point it becomes
> impossible to work on Fireworks through Dreamweaver.
>
> I've made test to show this trouble and I narrowed the
problem to the pictures
> as shown in the figures below,
>
> 1) In figure one I am creating a completely new
Fireworks file as arrow.png
> with two frames and one slice in it. After I am saving
it as .png I am
> exporting it as .html with images in /images subfolder.
>
> 2) After saving and closing the file in Fireworks, in
figure two, I am opening
> the html in Dreamweaver and changing the page properties
by writing zeros to
> page margins and by changing the default font.
>
> -----I guess in this point something happens which
breaks the integration
> between FW and DW--------because;
>
> 3) In figure three I am opening the .png through
Dreamweaver (by "Edit") and
> changes the place and size of the slice a little bit
>
> 4) When I press Done in Fireworks I see this picture in
figure four in
> Dreamweaver which shows integration between FW and DW
about table structure is
> broken. (In this point if I add any behaviur to the
slice DW doesn't recognize
> it, or any other change in FW can not be recognized by
DW)
>
> 5) In order to show this broken integration in table
sturucture, I am putting
> a new slice to png when Editing from DW in FW.
>
> 6) When I click on Done in DW I see this picture on the
figure six. Beacuse FW
> doesn't have any effect on html's table structure code.
>
>
> I can not upload images related my topic here but you
can see it in the same
> topic at
>
http://www.fireworksguruforum.com/index.php?showtopic=14282
>
>
>
I can reproduce your results, but I don't consider this a
bug; just a
limitation of Roundtrip editing.
You can't add or change slices without re-exporting the html
from
Fireworks. Roundtrip is for image editing, not for altering
the table
structure. If I edit, and re-export, my table remains intact.
If you want to edit the slices and resulting html, open the
PNG file
independently of Dreamweaver, change your slices and images
and then
choose File > Update HTML (this option is not available
when in
Roundtrip mode). FW will ask you to locate the html file.
When located,
you will have the options of
Replace Images and Their HTML - replaces the previous
Fireworks HTML.
Update Images Only - overwrites only the images.
As an aside, the rigid table created by FW is rarely
desirable for a
production web site.
HTH
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
.:Author:.
Lynda.com -
http://movielibrary.lynda.com/authors/author/?aid=188
Peachpit Press -
http://www.peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45a8-a70d-4b35fa14c9a4
Layers Magazine -
http://www.layersmagazine.com/author/jim-babbage -
IMessage no longer works between me and my girlfriend?
I have an iPhone 4 and my girlfriend has an iPhone 4S both with 5.1.1. We went on an international trip and she used a local simcard for a while. When we returend iMessaging no longer works between us. It works between all other iPhone users though. How do we fix this? We have tried hard resets of both phones. Thanks.
This worked for a while but now it's back to the same old problem. Any other ideas? This is super annoying.
-
Bridge CS4 has LONG delay in opening the first image
Photoshop CS4 upgrade was my Christmas present this year. I've been fighting this annoying "problem" ever since then...
I DO see this "problem" on my desktop PC, which is a Dell XPS-400 PC (with 2 GB of memory) running Windows XP (Media Center Edition) with SP3 installed. I DO NOT see this "problem" on my laptop, which is a Dell XPS-1530 (4 GB of memory) running Windows Vista SP1. I installed the Photoshop CS4 software exactly the same way on both machines, and I have the preferences set the same in both Photoshop and Bridge (and Camera Raw) on both machines.
Here's the situation: I first open Photoshop CS4 and then click on the Bridge icon in the Application Bar to open Bridge. When I use Bridge to open a photo, by either double-clicking the thumbnail, or right-clicking on the thumbnail and choose "Open" from the context menu, there is a 42 second delay before Photoshop opens the file. This long delay only occurs when opening the very first file.
Once that first image file is opened, double-clicking any thumbnail in Bridge will have it open in Photoshop CS4 in about 2 seconds. There will never be another long delay in having Bridge pass a file to Photoshop (or Camera Raw) again - until I close the applications and restart them. Once I restart the applications, the first photo takes 42 seconds to open....
This delay does not occur in opening the first image file if I right-click on the thumbnail in Bridge CS4 and choose "Open With" and manually choose Photoshop CS4.
Even if that is how I open the first (or several) image file(s), the first time I try to open a file from Bridge by double-clicking on a thumbnail (or right-click on a thumbnail and choose "Open") there will be that annoying 42 second delay before it opens.
It does not matter what the file format the first image file is (JPG, PSD, TIFF, or DNG), or what the file format of any subsequent image file is. As long as I do not close the Bridge and Photoshop applications, any subsequent file will be passed from Bridge to Photoshop in only a couple of seconds.
I have manually set the File Name Extensions in Windows XP, and in the Preferences in Bridge. Both have been set to open the file types listed above with Photoshop CS4.
I have uninstalled CS4, and have used two seperate Registry cleaners (CCleaner and jv16 Power Tools) before re-installing Photoshop CS4. This had no effect on this situation. I've run "chkdsk C: /r" several times, with no problems reported.
I have been searching through these forums for over 2 weeks now, and I have not seen anyone else report such a problem. I use my XP desktop much more than my Vista laptop, so I'd really like to fix this situation, but I don't know what else to try.
Gregg MackDon,
Thanks for all of your suggestions. I tried them all, but the problem remains exactly as it was. To properly document my efforts:
In Bridge's Preferences, I Purged and Compacted the Bridge Cache, then changed it's location to D:\Bridge_Cache (D:\ is a second physical internal SATA drive).
I can not tell the exact size the Cache is set to, but the slider in Bridge's Preference is very close to the left end (10,000) of the slider.
The Windows Page File is set to 3072 MB min and 4096 max, and it is entirely on the D:\ drive. (I have 2GB of physical RAM in the PC.)
I defragmented the C:\ drive using Diskeeper 2008 Pro Premier, and even ran a Boot Time Defrag.
Rather than set some exclusions for Norton Anti-Virus, I jsut disbled that Virus checking program for all of my experiments.
I deleted the Bridge Preference File by holding down the Ctrl key as Bridge was restarted.
I even deleted the entire contents of the C:\Windows\Prefetch folder. I then rebooted the PC - twice. I then re-disabled Norton Anti-Virus.
The PC is approaching 3 years of age, but it is a 3.2 GHz Pentium D machine with 2 GB of RAM and two internal SATA drives. Every other application that I run on this machine responds reponsively. Again it is only the FIRST image file that I have Bridge hand off to Photoshop (or Camera Raw) that takes forever. The second and subsequent image files take a second or two.... That doesn't sound like it's an "old hardware" problem to me.
I'm willing to try anything else that you, or anyone else would like to suggest.
Thanks
Gregg Mack -
White gaps between regular and video slides
I have just created an adobe captivate video. There is a white gap between regular slides and animation slides. It usually lasts for about 2 seconds. Because of this my audio and video are no longer synced. This gradually gets worse as the presentation continues. Does anybody know how to get rid of these white gaps? I'm using version 3. The issue is demonstrated in the following video:
http://screencast.com/t/hqczdmV69b9
Thanks in advance.It looks like they go all the way to the end of the slide. It is happening somewhere between slide 7 and slide 8 (see attached screen shots). Thanks again Rod.
-
Copy and paste styles between objects and entire slides
Hi,
In Keynote 5 I was able to copy and paste styles between objects and even between entire slides.
cmd+alt+c on one object (like a circle) and all its details like shadows, colors and animations could be transferred to another object.
One could even do it with entire slides and transfer one animation style to all the other slides.
THAT DOES NOT WORK ANYMORE.
Does anybody else miss these features?
Or is it just me?object animations tools are:
copy animation: Format > Copy Animation
paste animation Format > Paste Animation
there are no keyboard short commands for these.
There are no tools to copy or paste transitions between slides, you could duplicate the slide then add the content. -
Long delay between welcome message and agent picking up
Hello, when I call to to the lync client I hear the welcome text and music , but only after 25-30 seconds the call reaches one of the agents ??
in the snooperlog I see a sip /2.0 200 OK message and it takes about 15 seconds before another event happens, which is the invite.
What can this be ??
I moved a lync server from a hyper-v to a physical server, is anything still hanging around maybe ?
I don't see anything of it in the snooper log thoughFirst, if this is response group call, just for testing, unselect Edge server from your Lync pool and try again.
Second, you have to remove old servers. If they are here, they could create multiple problems. Try the following commands to find objects that belong to the old pools:
Get-CsUser -Filter {RegistrarPool -eq "lyncpool.domain.local"} | Select-Object Displayname
Get-CsCommonAreaPhone -Filter {RegistrarPool -eq "lyncpool.domain.local"} | Select-Object Displayname
Get-CsExUmContact -Filter {RegistrarPool -eq "lyncpool.domain.local"} | Select-Object Displayname
In additions, check your conferencing directories.
Please “Vote As Helpful” and/or “Mark As Answer” if this post helped you.
Maybe you are looking for
-
Why is the "open-in" drop box only able to show 10 Apps?
I would like Apple to increase the number of Apps I can see in the "open-in" drop down box. The limit of 10 is not enough. I have a number of Apps that can open PDF files, however, I only use goodreader. Every time I upgrade good reader, another A
-
Can you do webreporting with WAS6.40(only ABAP stack)
Hi gurus, I have one question: Is it possible to do webreporting with a WAS6.40(only abap)without a java stack. Only the ABAP stack is installed. So design/publish reports with the BEx Web Application designer Thanks for your reactions in advance.
-
Rich Client login error red "X"
BOXI3.0 Users asccess rich client as client tool, log in from 2 tier mode, but authentication hangs, or, they get a red x rather then a list of universes, or, when they get through all of this and select other data sources to view the universes,
-
How do I fix this bookmarks display glitch?
I'm using Acrobat 9 Pro (9.5.5) on a Mac (10.9.4) and the bookmarks in all of my PDFs have a glitch that makes them unusable. The content is still there, but there is an inordinate amount of space between each marker. Examples of this can be seen on
-
I am trying to download the adobe xi trial on my mac pro, and don't see the "download now" icon on the page. I see it on other software trials but not on this one. Does anyone know what it's now showing for me, and if there is any other way to downlo