CP-7925G keeps rebooting

Hello everyone.
We have a CP-7925G that has a problem of "infinite loop". When I turn it on, it keeps "resetting forever". Is there a procedure that can be done?
Thanks in advance.

If you can confirm that the phone has an IP Address, then yes. Likely a phone or TFTP issue. Otherwise, if the phone does not even get an IP Address it would be a DHCP problem.
I won't be a "network problem" because the the handset haven't even finish booting up. It's a hardware issue.

Similar Messages

Desktop/Finder keeps rebooting after upgraded to Maverick (mac mini hooked up to a home theater system)

My desktop keeps rebooting ever since I upgraded to Mavericks.
Current setup, Mac Mini hooked up to home theater (Panasonic SC-HTB20) that is then hooked up to my Panasonic Plasma TV.
I usually leave my Mac Mini on running and at least once a day when I turn on the TV I can see that my desktop was rebooted. Firefox and Chrome will say that it wasn't shut down properly and if I want to restore my previous session. Also some times when I switched the input to watch TV and switch back, all my windows will be scattered out of place. For example Chrome will be in the top left hand corner to the point that it's almost minimized and I wouldn't be able to move it as well. Only thing I can do is close out these applications and relaunch them. It doesn't appear that the OS actually crashed, but more like the desktop/finder itself crashed. Cause once in a while I will switch back or turn on the TV and the screen will stay black for a few minutes then I'll see the cursor in the top right hand corner. After that I will start to see the desktop and my application start loading. It doesn't go through the regular process of rebooting where you see the Apple logo so I don't think the OS actually crashed but I could be wrong.
For some reason it seems like Maverick doesn't like the home theater system. An almost guarantee way to reproduce the issue is to wait for the home theater to turn off after it's been inactive for a while. If I turn it on the home theater to have the audio coming from it I will see the desktop goes black immediately then the whole desktop reboot process I mentioned above will kick in.
Never had any of these issues on 10.7 before I upgraded to Maverick.
Anybody have any suggestion? I really don't want to format and downgrade back to 10.7.
Thanks

Sounds like a kernel panic.
If you post the report we could have a go at deciphering it.
It would be in /Library/Logs/Diagnostic Reports.

865PE Neo2-V Conflict, keeps rebooting.....

Hi,
I have recently bought a MSI 865PE Neo2-V mainboard but it keeps rebooting all the time at intalling windows xp.
One time i did manage to install winxp but after installing other software the computer reboots.
I doublechecked the CPU and Memory.
So i think it is the Bios settings. Can anyone help me out with this problem?
This is my system:
MSI 865PE Neo2-V
Intel Pentium 4 3.0Ghz
160 GB WD
512 MB DDR Twinmos Memory
350 Watt PSU
Sapphire RADEON 9250

Quote from: fafner on 08-March-05, 22:55:30
ok. let us know what happens wnen you try the different psu.
Hi again
I tried an other PSU and it works!! I can't thank all of you enough.
I think it was my PSU that was not compatible with the mobo or that the PSU was corrupt.
Anyways PROBLEM SOLVED!!!
Thank You.

Mac pro keeps rebooting

My Mac Pro 2.1 Keeps rebooting ramdomly. It seems to be more common when editing video.
Any ideas anybody?
Thanks in advance.

Sorry for the slow reply.
My Mac Pro 2.1 screens go black and instantly reboots, sometimes it keeps rebooting until i hold the power button. I have reset pram,smc,renewed permissions and checked hard discs.
I am booting from a drive with lion 10.7.3. It also happens when I am booted from another drive running Snow Leopard.
I have also removed 4 gig of the 8 gig of ram and tried different configs of ram.
I have also disconnected everything except the keyboard, mouse and 2 monitors.
It is driving me bonkers because I cannot trust the mac Pro and I often lose work because it suddenly reboots.
Any suggestions anyone.

Laserjet pro MFP M176n keeps rebooting

Hi,
I have a Color laserjet Pro MFP M176n printer. It ha snot been used for sometime.2 weeks ago when I printed something it had constant paper jam. I open the front door to remove the jam problem was not solved, I removed the ink cartridge to see if there was any piece of paper .Switch the apparatus off and when i switch it on again it just wnt switch on and now it just keep rebooting and wont display anything.
I would liek to know how to solve this problem or if the printer has to be thrown out.
Regards

Hi @widadr,
I see that you are experiencing issues with the printer constantly rebooting. I will certainly do my best to help you.
Temporarily disconnect any cables from the printer, except the power cord, just to make sure there isn't any interference for the next few steps.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
Try and update the printer's firmware by a USB connection if the issue persists. Software and Drivers.
I will send you another step to try in a private message.
In the forum beside your handle name just click on the envelope to view it.
How is the printer connected? (USB/Ethernet)
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you appreciate my efforts, please click the Thumbs up button below.
If there is anything else I can help you with, just let me know. Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Mac keep rebooting on its own

I have a Imac with osx 10.5.8 that keeps rebooting on its own . I have gone over the consol logs and I can not see any thing that could be do it . I found one log entry that is the last log entry befor it reboots
Feb 12 09:39:12 localhost kernel[0]: hi mem tramps at 0xffe00000
that entry is their both times it rebooted today at the same location of 0xffe0000
is this a memory problem or is it some thing else. I have over 20 mac's i manage in this office and this is the only one we have issues with any help would be great
Message was edited by: apps4u

What model iMac is it please? Hard for me to tell from your specs.
Dale

My iPhone 3GS 16gb, is stuck in restore mode, downloaded and tried to do a restore multiple times. Keep getting an error The iPhone "iPhone" could not be restored. Unknown error occured (-1). Cannot get it out of restore mode, keeps rebooting!

My iPhone 3GS 16gb, is stuck in restore mode, downloaded and tried to do a restore multiple times. Keep getting an error The iPhone "iPhone" could not be restored. Unknown error occured (-1). Cannot get it out of restore mode, keeps rebooting!
I have tried to hold the "home" and "power" button to reboot
I have tried powering it off
I have tried, to unplug the cable, hold the "home" button and then plug it in.
Can't check the SN or warranty, cause it is stuck in restore mode.
Is the hard drive gone? Should there be something replaced.

http://support.apple.com/kb/TS3694#error1
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
Usually this is caused by your antivirus or firewall blocking iTunes access to the Internet. It can also occur if the phone is jailbroken or if the computer you are using was ever used to jailbreak an iDevice.

Lenovo X240 keeps rebooting with Kernel-Power (Event ID:41); Windows 7 Professional

Hi All
I have my newly Lenovo x240 installed with Windows 7. Sometime, it can boot up, but sometimes it keep rebooting during the windows logo appear.
When it goes wrong, it will have the following screen.
But, if I am lucky, after several "auto-reboot", I can get into the Windows 7. But sometimes, it shows the similar screen above (without windows logo but with what my current desktop), and it then auto reboots.
This scenario is so random, I don't know how to fix it. At this stage, I don't want to use system restore, as some software is installed by my client which is not located near my office, while the reboot issue happens before those installation
Here are some event 41 details that I captured.
7/31/2014, 0808 am
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
  <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
  <EventID>41</EventID>
  <Version>2</Version>
  <Level>1</Level>
  <Task>63</Task>
  <Opcode>0</Opcode>
  <Keywords>0x8000000000000002</Keywords>
  <TimeCreated SystemTime="2014-07-31T06:08:22.584010700Z" />
  <EventRecordID>14128</EventRecordID>
  <Correlation />
  <Execution ProcessID="4" ThreadID="8" />
  <Channel>System</Channel>
  <Computer>LAPTOP-JACH.Greenpeak.com</Computer>
  <Security UserID="S-1-5-18" />
  </System>
- <EventData>
  <Data Name="BugcheckCode">0</Data>
  <Data Name="BugcheckParameter1">0x0</Data>
  <Data Name="BugcheckParameter2">0x0</Data>
  <Data Name="BugcheckParameter3">0x0</Data>
  <Data Name="BugcheckParameter4">0x0</Data>
  <Data Name="SleepInProgress">false</Data>
  <Data Name="PowerButtonTimestamp">0</Data>
  </EventData>
  </Event>
7/30/2014, 1058 pm
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
  <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
  <EventID>41</EventID>
  <Version>2</Version>
  <Level>1</Level>
  <Task>63</Task>
  <Opcode>0</Opcode>
  <Keywords>0x8000000000000002</Keywords>
  <TimeCreated SystemTime="2014-07-30T20:58:49.334410300Z" />
  <EventRecordID>13947</EventRecordID>
  <Correlation />
  <Execution ProcessID="4" ThreadID="8" />
  <Channel>System</Channel>
  <Computer>LAPTOP-JACH.Greenpeak.com</Computer>
  <Security UserID="S-1-5-18" />
  </System>
- <EventData>
  <Data Name="BugcheckCode">0</Data>
  <Data Name="BugcheckParameter1">0x0</Data>
  <Data Name="BugcheckParameter2">0x0</Data>
  <Data Name="BugcheckParameter3">0x0</Data>
  <Data Name="BugcheckParameter4">0x0</Data>
  <Data Name="SleepInProgress">true</Data>
  <Data Name="PowerButtonTimestamp">130512274872126554</Data>
  </EventData>
</Event>
7/29/2014, 1125 pm
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
  <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
  <EventID>41</EventID>
  <Version>2</Version>
  <Level>1</Level>
  <Task>63</Task>
  <Opcode>0</Opcode>
  <Keywords>0x8000000000000002</Keywords>
  <TimeCreated SystemTime="2014-07-29T21:25:43.490410600Z" />
  <EventRecordID>10450</EventRecordID>
  <Correlation />
  <Execution ProcessID="4" ThreadID="8" />
  <Channel>System</Channel>
  <Computer>LAPTOP-JACH.Greenpeak.com</Computer>
  <Security UserID="S-1-5-18" />
  </System>
- <EventData>
  <Data Name="BugcheckCode">0</Data>
  <Data Name="BugcheckParameter1">0x0</Data>
  <Data Name="BugcheckParameter2">0x0</Data>
  <Data Name="BugcheckParameter3">0x0</Data>
  <Data Name="BugcheckParameter4">0x0</Data>
  <Data Name="SleepInProgress">false</Data>
  <Data Name="PowerButtonTimestamp">130511426772773667</Data>
  </EventData>
</Event>
7/29/2014, 1034 pm
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
  <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
  <EventID>41</EventID>
  <Version>2</Version>
  <Level>1</Level>
  <Task>63</Task>
  <Opcode>0</Opcode>
  <Keywords>0x8000000000000002</Keywords>
  <TimeCreated SystemTime="2014-07-29T20:34:46.540407100Z" />
  <EventRecordID>9957</EventRecordID>
  <Correlation />
  <Execution ProcessID="4" ThreadID="8" />
  <Channel>System</Channel>
  <Computer>LAPTOP-JACH.Greenpeak.com</Computer>
  <Security UserID="S-1-5-18" />
  </System>
- <EventData>
  <Data Name="BugcheckCode">0</Data>
  <Data Name="BugcheckParameter1">0x0</Data>
  <Data Name="BugcheckParameter2">0x0</Data>
  <Data Name="BugcheckParameter3">0x0</Data>
  <Data Name="BugcheckParameter4">0x0</Data>
  <Data Name="SleepInProgress">true</Data>
  <Data Name="PowerButtonTimestamp">130511396438935880</Data>
</EventData>
  </Event>
Could you please help?
BR
Jacky

Hi JackyCheung,
I would strongly you to ensure you have the latest drivers and also Windows Updates installed before proceeding with anything else. Have you ran the diagnostics to see if anything hardware related maybe causing the issue?
In this scenario I highly doubt System Restore would help, was it working OK when you got it? what has changed since it was working without the issue?
Regards
Roshan

I restored my iphone 4 to prepare it for sale and now it keeps rebooting itself every few minutes saying "Waiting for Activation". What's going on?!

I'm just trying to figure out if theres some other issue at play or if its normal for the phone to keep rebooting while searching for activation. I'd like to sell it this weekend but I don't want to sell a broken phone to someone. I researched this issue a bit online and only found a similar issue having to do with facetime/imessage but this seems to be different. I went through the necessary steps to fix the problem others were having, even though it didnt seem to be exactly the same as mine, but it is still happening. I will say that I got the iphone wet some time ago but it has worked fine since then so I'm assuming its not related. Perhaps the battery needs to be replaced? Any and all input or advice would be greatly appreciated. THANKS!

I should mention it is ios 6.1.3. The phone has now also started, after rebooting, showing the signal bars next to the wifi signal icon at the top but no "Sprint" type next to the bars as usual. And then after a few minutes it shuts down, shows the black screen with the white apple in the middle for a few moments, comes back up with the Waiting for Activation message, the signal bars pop up and the whole cycle just repeats itself.

My ipod touch keeps rebooting I restored from the back up it but it keeps rebooting,

My Itouch started rebooting, when i plugged it into itune it told me I needed to restore from back up after several attemps ( I received an error 9 message) I finaly got it to restore, but it just keeps rebooting!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mod
   http://www.wikihow.com/Put-an-iPod-or-iPhone-into-DFU-Mode
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable or another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

30g Ipod Video keeps rebooting

I just got the new Itunes 9.0 and synced my Ipod video as usual, but now it just keeps rebooting and is stuck on the black screen with the white apple.
I have tried (twice) going into disk mode, and restoring the Ipod, but it still has the same issue. I have also tried plugging it into a wall charger.
Any help would be appreciated Thanks in advanced!

probably the next best thing to try is attempting to reset it while it is connected to a power source (like the PC). see:
iPod only shows an Apple logo and doesn't start up

HD DRV Keeps Rebooting after adding audio receiver

I have had FIOS tv for almost 2 years now with no issues, I am in Edgewater, MD. I recently bought a new receiver, Onkyo TX-SR606 receiver. After hooking everything up through the receiver with HDMI cables, my DVR box keeps rebooting. It only happens when I run the HDMI to the receiver then to the TV. If I run the HDMI directly to the tv, like it has been for over a year, I don't have any problems. I know I could work around this by just running the audio to the receiver, but I wanted to take advantage of the HDMI cable and control all sources through the receiver. Has anyone else had this kind of issue?

Your problem comes from the looseness of the HDMI protocol. The protocol allows for to much variance in the implementation and because of that a digital "handshake" issues occur. The more HDMI components you add to the mix the more likely you are to have issues. I get the DUI message at every start up and I have HD DVR straight to the TV, however I don't experiance any other audio or visoe issues. Just the meassage as everything intializes.
"If your problem has been solved, please mark it as such. Don't forget to hand out your Kudos!"

HP 8600 Officejet Pro keeps rebooting

THe printer is in a reboot cycle and never completes the boot process. Can't get to a menu, just reboots and starts over.

Hi @RodLH,
Welcome to the HP Forums!
I see that your HP Officejet Pro 8600 printer keeps rebooting. I am happy to help!
I would suggest a hard reset, by going to this post, How to perform a Hard Reset, by @Rich1. It is important that the printer's power cable is plugged directly into the wall outlet, and not a surge protector! Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
If that does not resolve your issue, please call our phone support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Best of luck!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

My ipod 4gen keeps rebooting for 9 seconds then stops for 4 seconds, and it keeps repeating this, how do i get it to stop?

my ipod 4gen keeps rebooting for 9 seconds then stops for 4 seconds, and it keeps repeating this, how do i get it to stop?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I just upgrade my ram to 16g from 4 and my mac mini keeps rebooting

i just upgraded my mac mini from 4 to 16 g of ram and now it keeps rebooting. Any idea what the problem could be or is it a hardware problem and how to tell?

1) It is Important to get the Correct and Matching RAM
Use this Link to check which RAM is suitable for your Mac...
http://eshop.macsales.com/shop/apple/memory/
The site also have videos on how to Install RAM should you need it...
423Milkman wrote:
i just upgraded my mac mini from 4 to 16 g of ram and now it keeps rebooting.
2) Check that the RAM is seated correctly.
3) Try it with only the Original RAM installed.

CP-7925G keeps rebooting

Similar Messages

Maybe you are looking for