Cp 8 - How to add ppt slides to an existing project with space to the left and right ?

After much trial and error, i know exactly what I want. The priority for me is clear and unscaled captured video, and my project resolution shall be 1260x700.
now, i want to bring my ppt slides in and respect the aspect ratio- this means that there will be blank space to the left and right of the slides. The active area of the ppt slide should be about 700 h and 4/3 * 700 width. To avoid scaling, i would love them to be 699 x 932 and have the areas to the left and right blank. i am also willing to make my project 1260x702.
The objective here is to avoid scaling. I have seen that things look great when scaling is avoided.

Maybe you'll find some ideas here: Create and Use a "Knockout" Master Slide - Captivate blog

Similar Messages

I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

If you mean there are parts of the picture at the sides you want to remove, you have at least 2 choices.
You can mask the edges of the frame or enlarge it so that the left and right sides are outside the picture area.
The latter suggestion will reduce the quality of the video and you will also lose an equal amount from the topand bottom, though you could slide the image up or down.

How do I plot a y axis on the left and right in DIAdem/VIEW (version 11.0)?

I am trying to analyze flight data, and I would like to analyze plots of certain parameters so that they share an x axis. It is necessary to view these using two different y axis, on the left and right. How do I do this in DIAdem (version 11.0) in the VIEW tab? Is this possible to do in the VIEW tab?

myocom,
You can highlight random points in DIAdem as well.
Here is an example:
Use the cursor to move to the point you wish to highlight.
Press the "Set Data Point and Flag" icon on each data point you wish to highlight
When you are done selecting points, press the "Flags: Copy Data Points" icon - that will copy all X/Y coordinates into two new channels
I created a REPORT Layout using the original data and the highlighted random points (I added the actual point Z-value above the point, they look strange when written at the exact point). I attached the layout for your reference.
The complete task took 3 minutes from loading the data to finishing and exporting the REPORT layout. If you have a REPORT layout already, this will take less than 30 seconds ...
I am not familiar with Matlab, so I can't compare how this works in DIAdem vs. Matlab. You can add the combine the complete process in a Script and it will automatically create this kind of report after simply selecting a few data points in VIEW and then pressing a button ...
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."
Attachments:
Report with highlights.zip ‏5 KB

How do I get page numbers on the left and right side of the page?

I am finishing up a book in PAGES '08 on my Mac.
How do I get page numbers on the left and right side of the page.
I can get them on the page but I'd like them on the left and right sides.
Evan

If the icons are from dmg files that were used to install 3rd party apps like this one for VueScan
Control (right) - click on the open dmg icon and select "Eject xxxx" from the contextual window.
Then find the actual dmg file associated with those icons
and drag to the Trash in the Dock and empty.

How do I apply effects equally to the left and right channels.

I am an intermittent user of Sound Track Pro. I've made some cool audio beds with it in the past but right now I'm having two problems since I have not used it in so long and never was pro with it to begin with.
1. Seems like the lift and stamp tool only works in multi-track mode and not in the wave editor.
2. so I put my file in the wave editor to redo the effects from scratch there but now I don't know how to apply them equally to the left and right channels.

Thank you! One more question: I've got quite a bit of interview tape and would like to increase the playback speed to 1.5X or 1.75 x so that I can get through everything faster. Is there a way to set it at those tempos? I only see the 2X, 4X, 6X, etc. options, but these are too fast and I can't understand what is being said. Is there a way to set this to 1.5X the original speed?
Thanks!

All of a sudden my screen has black bars on both the left and right sides; all of my folders are overlapping as well. Anyone know how to fix this?

All of a sudden my screen has black bars on both the left and right sides; all of my folders are overlapping as well. Anyone know how to fix this?

Did you try restart the Mac?

How to adjust the left and right Margin in PDF

Hi,
I've a dashboard ,when i open this dashboard in PDf , left and right margin are not in sink. How to adjust those margins.
Thanks,
Malli

Hi,
there are only two joins available for InfoSet in BI.
For more details about Infoset joins you may refer following SAP documentation or serch at forums.
http://help.sap.com/saphelp_nw04/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/frameset.htm
I hope it will help.
Thanks,
S

How to access a url in file receiver CC with space in the folder name?

Hi
PI 7.11 sp4:
In a file receiver channel I would like to send the message to this folder:
de-prod.dk\bu\something\something\PTI eventstanden\archive\"
But I get this error message:
"Target directory 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\"\de-prod.dk\bu\something\something\PTI eventstanden\archive"' does not exist"
My question is: where the f.... does it get the 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\ from, and how can I fix it?
One issue is the space in the folder name. I have tried to replace the space with %20 and then remove the "" s around the whole url, but without any luck.
When I log on the server on which Pi is running I can access the folder using the mentioned url including the ""s.
All suggestions would be highly appreciated!
MIkael

> But I get this error message:
>
> "Target directory 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\"\de-prod.dk\bu\something\something\PTI eventstanden\archive"' does not exist"
>
> My question is: where the f.... does it get the 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\ from, and how can I fix it?
It comes from the "
Anything else but \ is treated as local folder under working directory of PI
> One issue is the space in the folder name. I have tried to replace the space with %20 and then remove the "" s around the whole url, but without any luck.
It works for me just to copy the folder from Windows explorer into channel config. With space and without ".

How to add a facet to an existed project in my plug-in?

In my plug-in on Workshop, I want to add a facet to a project dynamicly, and I try two ways, but it does't work:
1: use method "installProjectFacet"
facetedProject.installProjectFacet(fv,fv.createActionConfig(Action.Type.INSTALL,project.getName()), monitor);
The exception is :
org.eclipse.core.runtime.CoreException: Class com.bea.wlw.xmlbeans.feature.XMLBeansBuilderFeatureConfiguration$Factory is not an instance of org.eclipse.wst.common.project.facet.core.IActionConfigFactory.
at org.eclipse.wst.common.project.facet.core.internal.ProjectFacetVersion.createActionConfig(ProjectFacetVersion.java:141)
at ilog.integration.bea.workshop.AddXMLBeanFacet.execute(AddXMLBeanFacet.java:171)
2: use method setFixedProjectFacets
final Set <ProjectFacet> sourceFixed=facetedProject.getFixedProjectFacets();
                         Set <ProjectFacet> updatedFixed=new HashSet<ProjectFacet>();
                         Iterator it=sourceFixed.iterator();
                         while(it.hasNext()){
                              updatedFixed.add((ProjectFacet)it.next());
                         updatedFixed.add(f);
                         final Set <ProjectFacet> destFixed=updatedFixed;
                         facetedProject.setFixedProjectFacets(destFixed);
after executed, there is no changes.
Can you give me some advice?

After I add "org.eclipse.wst.common.project.facet.core" to my plug-in dependencies, the above exception does't appeared, the installProjectFacet can be executed without exception.
But when I release the plug-in and setup on workshop, there was a new exception when executed, I meets a new problem:
Root exception:
java.lang.NoClassDefFoundError: org/eclipse/wst/common/project/facet/core/IProjectFacet
at ilog.integration.bea.workshop.ui.shared.utils.AbstractArtifactsGenerator.importSchemas(AbstractArtifactsGenerator.java:138)
at ilog.integration.bea.workshop.ui.ws.WSArtifactsGenerator.createTypeMembers(WSArtifactsGenerator.java:93)
at ilog.integration.bea.workshop.ui.ws.pages.NewDecisionServiceWizardPage.createTypeMembers(NewDecisionServiceWizardPage.java:49)
at ilog.integration.bea.workshop.ui.shared.pages.NewTypeWizardPage.createType(NewTypeWizardPage.java:1844)
at ilog.integration.bea.workshop.ui.shared.wizards.DecisionServiceCreationWizard.finishPage(DecisionServiceCreationWizard.java:71)
at org.eclipse.jdt.internal.ui.wizards.NewElementWizard$2.run(NewElementWizard.java:117)
at org.eclipse.jdt.internal.core.BatchOperation.executeOperation(BatchOperation.java:39)
at org.eclipse.jdt.internal.core.JavaModelOperation.run(JavaModelOperation.java:718)
at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1721)
at org.eclipse.jdt.core.JavaCore.run(JavaCore.java:3844)
at org.eclipse.jdt.internal.ui.actions.WorkbenchRunnableAdapter.run(WorkbenchRunnableAdapter.java:87)
at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:113)
Why canâ€™t find the class IProjectFace? I haved added project facet plug-in into my plug-in dependencies, so I am confused. Does our plug-in needs other setting except eclipse plug-in's dependecies?
no pains, no gains

VIDEO ATTACHED...my 2011 macbook pro hinge cover slides to the left and right and makes weird noise when i push down on it....plzzz watch

u can see how the hinge cover moves sideways bc u can see the crack get bigger when i move it one way and u can hear the noise when i push down it......TURN VOLUME ALL THE WAY UP

http://www.youtube.com/watch?v=5Vrqpa2Y2xA

How do I delete songs that will not let me swipe to the left and delete?

There are two songs in my iTunes library that I cannot delete. I have tried swiping to the left to delete but nothing will work. I have also tried to delete them off my playlist on my mac, but they do not show up on the computer playlist

Hello tjcornman,
Thank you for the details of the issue you are experiencing after changing your Apple ID. I recommend the following article for an issue like this:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Thank you for using Apple Support Communities.
Best,
Sheila M.

How do I break a stereo audio clip to get the left and right separately

$subject really. If I break apart a stereo audio clip I just get track 1, I can't get track 2.
Thanks

I tried that, but I keep getting "Unsupported Clip" in the channel configuration audio tab of the Inspector.
Here's my workflow:
Import Flip cam's h.264/AAC MP4 files
Edit a clip into a project.
Break apart the clip, to give separate video and audio segments
The green audio segment (will have -a1 after the name in the segment) will be say it's an "Unsupported Clip" in the channel configuration audio tab of the Inspector.
If I change the original clip to dual mono before I break apart I get two mono clips, which is what I was after (but then I could just disable one of the dual mono tracks without splitting apart if that was all I wanted).
I suggest that getting an "Unsupported Clip" when I break apart these clips is a bug.

How to fill up my laptop screen with Firefox horizontally as it currently has a 3" margin on the left and right sides?tly has a

I just purchased a 17.3" screened-laptop using MS Outlook and Explorer 9 Browser. I cannot use Firefox as my default Browser because I cannot get Firefox to fill up my screen.When I open up Firefox, it maintains a large 3" margin on the left and right sides which does not exist when I open up Explorer 9. Increasing the font size only increases the text size vertically but does nothing to decrease the margin size horizontally.

You can use this extension to set a default font size and page zoom on web pages:
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

How to get rid of advertisements that appear on both the left and right of my web browsers

Recently i noticed that when i open either Firefox or Safari, the page will load but a few seconds later, two identical ads appear on both sides of my browser and partially obstructing the webpage that i'm on... PLEASE HELP!
this is what it looks like.... http://i43.tinypic.com/2q8aj9s.jpg

Make sure 'block pop-ups' is selected in both browsers.
Firefox Preferences>Content tab; Safari Preferences>Security tab.
For both browsers download AdBlock:
Firefox - https://addons.mozilla.org/en-US/firefox/search/?q=AdBlock&cat=1%2C0&appver=11.0 &platform=mac
Safari - https://extensions.apple.com

Muse widget selection dial or left and right slider selector

Hello, I am looking for a muse widget that lets a user slide a lever left and right or In a circle like a dial to make a selection. For example, if the range is from 300 to 700, the user will slide the lever on the left and on the right to say he likes the range of 450 to 500. How do I search for that type of widget? Does it exist? Thank you so much, Stacy

Actually I do not have a shop. . I was looking for a range slider widget
with handles on the left and right side. That was just a sample. I
found some code online but I'm not a programmer. The slider let you say
select 10 for a min and 59 for a max. And the slider range was from -100 to
+100. Does that make more sense.
On Friday, December 19, 2014, Gaurav Sharma <[email protected]>

Cp 8 - How to add ppt slides to an existing project with space to the left and right ?

Similar Messages

Maybe you are looking for