CP_BD_DIRECT_INPUT_PLAN for changing - Error: No header alternative exists

Hi all,
I want use the FM CP_BD_DIRECT_INPUT_PLAN for changing routings, but I get error-messages "No header alternative for specified object exists".
I use this FM with ECC 6.0, release 7.0 without problems (only sequence 0 and many operations).
In this case is it ECC 6.0 and release 7.01 and I have alternate sequences and operations.
Does anyone know this problem and can help me?
Thankyou.
Best regards
Peter

Hi,
the cause of this message is a change number (rc271_di_imp-aennr), which has an valid-from date different to the valid-from date of the work plan (aenr-datuv was the 01 September 2010 and plko-datuv the 10 November 2010).
By clearing of the change number into structure rc271_di_imp structure appears this message does not occur.
Regards
Peter

Similar Messages

  • CP_BD_DIRECT_INPUT_PLAN for changing - Error: No header alternative

    Hi all,
    I want use the FM CP_BD_DIRECT_INPUT_PLAN for changing routings, but I get error-messages "No header alternative for specified object exists".
    I use this FM with ECC 6.0, release 7.0 without problems (only sequence 0 and many operations).
    In this case is it ECC 6.0 and release 7.01 and I have alternate sequences and operations.
    Does anyone know this problem and can help me?
    Thankyou.
    Best regards
    Peter

    Hi,
    the cause of this message is a change number (rc271_di_imp-aennr), which has an valid-from date different to the valid-from date of the work plan (aenr-datuv was the 01 September 2010 and plko-datuv the 10 November 2010).
    By clearing of the change number into structure rc271_di_imp structure appears this message does not occur.
    Regards
    Peter
    Edited by: Peter Loeff on Nov 10, 2010 4:33 PM

  • Substitution for change of document header

    Hi
    I have created a substitution for the change of document header for a company code. I have made it in GGB1 and activated it in the Tcode OBBH.
    However it does not allow me to post the document (Tcode FB01) - I get the syntex error in program 'GBTLEFI0' in include 'GBTLEFIB' in line '1593' - 'The FORM "SUBCON_3ZDEPIND047" does not exist. and the processing is terminated.
    Please provide the solution
    Thanks
    Neeraj

    Hi
    For changing the documents we can use LSMW instead of substitutions.
    Thanks
    Sandesh

  • EXIT/BADI for ME31L and ME31K for changing Incoterms in header and item

    Hi All,
    I am facing an issue in ME31L,ME32L transactions.
    In vendor master , incoterm is maintained .So whenever a PO is created with particular vendor, the same incoterm(EKKO-INCO1& EKKO-INCO2) will get defaulted into PO as well. Now i need to change the incoterms2 on basis of some logic, but i was not able to find the correct BADI/EXIT to do these changes.
    This relation can be seen in vendor master partner profile.
    SO if I create a PO/SA with a vendor and goods supplier is different the incoterm from vendor is getting defaulted there, not from goods supplier .
    So am looking for any EXIT/BADI which will enable changing of Incoterms2 based on the incoterms1 value.
    Thanking you in advance.
    satheesh

    HI Sharma,
    Thank you for your response.
    This particular BADI ME_PURCHDOC_POSTED is getting triggered when i am creating a SA in ME31L but when I am changing the values in the BADI that is not getting updated on the screen.
    thanks,
    satheesh

  • How do I revalue inventory for change in cost?

    Hi,
    How do I revalue inventory for change in cost? BOM exists for manufactured Portland cement, backflusing relieves inventory per this BOM, however, old cost still appears as valuation for this product. I did a cost estimate for this product (2000000004), marked, and released this product. Effective date of this BOM was 07/01/2009.
    kindly help me
    Thanks
    Suvarna

    Dear Suvarna,
    Once after taking a new released cost estimate for a product,it's stock gets automatically revaluated as per the new price or
    say new value.
    Can you please confirm whether in the accounting view of the material master you are able to see the last price change date is
    same as your cost estimate date.Only then it means the new price was marked and stamped properly and based on the new
    standard price the stock get's valuated automatically.
    There is no other transaction required for this process.
    Check and revert back with your further queries.
    Regards
    Mangalraj.S

  • Error message: No documentation exists for message V1096.

    Hi Friends,
    While monitoring the production system, got some cancelled transactions.
    Error message: No documentation exists for message V1096.
    For this I found one sap note 845599, but it's upto 5.0 , but we are using 6.0. please suggest me how to search?
    if you provide solution for above message or alternative sap note, its very help ful for me
    thanks in advance,
    regards,
    durga

    Hello Durga,
    IPlease apply the following note 845599 and 854744. Even these notes are up to 5.0, please review the source code.                                                                               
    Please make then  the following correction in include program               
    LKAIPF2O :                                                                  
      call function 'SD_ORDER_CHECK'                            "326856         
           exporting                                                            
                i_cobl          = p_cobl                                        
                i_status_check  = con_off                                       
                I_NO_WARNUNG_V1096 = 'X'                 "<<<<< INSERT          
    These code correction should avoid the V1096 error / warning problem.                                                                               
    Another possible solution could be the following : please check if          
    you can remove the rejection code in the sales order item of the sales      
    order , which is reported in the job log.        
    Regards
    Ruy Castro

  • My iphone 3GS no longer syncs with iTunes. The phone is recognised, backs up but then I get an error message: "Waiting for changes to be applied". BUT unlike other people, it doesn't stay stuck on it, instead the process closes down immediately

    Hi all,
    Apologies: I've just joined the community and didn't quite figure how to write a msg! Hope it works...
    Anyway,
    I read many posts on this annoying error message (Waiting for changes to be applied) in the last 2/3 days, but they all refer to the sync staying stuck on it.
    Mine doesn't.
    I read the message, then it quickly shuts down the sync and the iTunes progress bar only shows the apple...
    As suggested by many, I removed voice msgs, turned off/on, tried to sync in individual stages (calendar only...) but nothing works.
    I am up to date on iTunes (11.1.1.11) and have IOS 6.1.3 on my phone, to sync on a Win8 pc (all worked fine until recently).
    I have had this phone for several years and it has never done this.
    It worked absolutely fine, until I loaded the latest version of iTunes it seems...
    Any suggestions?
    Many thanks

    ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
    (I use iTunes 11.1.5.5)

  • How to sort out error downloading perpetual license of the CS6 Design Standard for MAC: JRun Servlet Error 413  Header Length too Large?

    How to sort out error downloading perpetual license of the CS6 Design Standard for MAC: JRun Servlet Error 413  Header Length too Large?
    Just bought the perpetual license online - student-teacher version. Received email confirming my eligibility and followed all instructions to a 't', but still got this 413 error message, and cannot continue.
    Would anyone be able to help me?
    Or how can I get in touch with Adobe themselves?
    How do you get to the chat? I bought it with their help, but cannot remember how to get there again. Took me ages to find the chat.
    Cheers!!! Thanks a million! Any help is welcome!!!!

    Make sure you have cookies enabled and clear your browser's cache before you try downloading.  If it continues to present that error try using a different browser.
    As far as getting to a chat link goes, it can be hit or miss...  Start Here  If after selecting relevant responses you are unable to find a solution, choose "Still need help? Contact us." and the chat contact option.

  • BAdI or USEREXIT for changing data of purchase order header - ME21N

    hello all,
    I would like to ask you any way to change the field "reason for change" of the Purchase Order  header.
    I tried implementing the method PROCESS_HEADER of IF_EX_ME_PROCESS_PO_CUST
    or changing reason_code of structure ekko in user exits EXIT_SAPMM06E_006 and EXIT_SAPMM06E_006
    but it seems not to work.
    How can i do?..
    sap. v. ecc 6.0

    >
    Shiva Kumar wrote:
    > Use the user exit : EXIT_SAPMM06E_012: This is triggered on saving of a PO...and user can add validations etc in the exit...
    > Cheers
    It doesn't work...
    >
    Martin Voros wrote:
    > you get reference to object IM_HEADER in method PROCESS_HEADER of BADI ME_PROCESS_PO_CUST. On this object you can call two methods - GET_DATA and SET_DATA. GET_DATA returns structure with type MEPOHEADER. You can change your field here and then call method SET_DATA with your modified structure. This should work.
    > Cheers
    ..same thing for this solution...
    the field that i want to change is RSCOD inside structure EREVGRID...it seems to have also get_data and set_data methods ( IF_REVISION_ITEM_DCM ),
    but I don't know which BAdI to implement that has a object type ref to EREVGRID...
    Edited by: E_M on May 13, 2008 11:08 AM

  • BADI ME_PROCESS_PO_CUST for changing header data

    Hello Experts,
    I'm using Method PROCESS_HEADER in Badi ME_PROCESS_PO_CUST in order to change some header data.
    I want to change header data depending on the partner data which are on header level.
    It works fine as long as there are data changed in the header or item level and not only on the partner screen.
    The method in this Badi isn't processed if only partner data are changed. But for me it is necessary to set a special field on the header depending on the partner data.
    Regards,
    Sven

    Hi,
    Firstly, for changing Header data without any INSERT/UPDATE?MODIFY statement, badi - ME_PROCESS_PO_CUST  will not be useful.
    As method you mentioned has no header parameters under CHANGING / EXPORTING clause.
    You can use the badi which has the parametrs you want in either change/ Export mode. It can be defined under table also.
    Below is the list of important badis gettign called, however none of them contains header values in change/export clause.
    ME_CCP_ACTIVE_CHECK
    MD_STOCK_TRANSFER
    ME_DEFINE_CALCTYPE
    ME_PO_PRICING
    ME_FIELDSTATUS_STOCK
    ME_COMMITMENT_STO_CH
    ME_COMMITMNT_PARKING
    ME_INFOREC_SEND
    ME_CHECK_SOURCES
    ME_PURCHDOC_POSTED
    Instead you can use enhacement MM06E005  Customer fields in purchasing document.
    Create a project under Transaction CMOD.
    Assign enhancement as Project component.
    You'll find Exit 012. At time of save you can change header im_ekko based on you parterner data tab.
    Regards,
    Amee.

  • Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. what now?

    Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?

    I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

  • I just upgraded to the latest edition of firefox for mac and I am getting this error message Textarea Backup] Existing text detected in 'add_comment_text', overwrite with this backup how can I get it to go away?

    I updated to Firefox 8.0 for Mac and when ever I try to log on to Facebook I get this error message Textarea Backup] Existing text detected in 'add_comment_text', overwrite with this backup? and then it says yes and gives you the choice of either canceling or ok and it doesn't go away when you click either button...What is going on?

    It is working now. I no longer get the message about the item not being available in the US and I can access the store.

  • No authorization for changing Customer Centrally- Idoc in Error Status 51

    Hi Experts,
    We are implementing MDM for one of the client.
    The client  runs a  modification scenario in MDM for Customer Master.
    He modifies a customer record in MDM and this record is transfered from MDM to ECC via PI through Idocs.
    We are using standard Idocs for Customer Master which is DEBMDM
    There are 2 Idoc's generated in ECC by PI from DEBMDM as DEBMAS and ADRMAS.
    ADRMAS Idoc is succesfull in ECC and the corresponding record is modified.
    Now the issue is that the corresponding DEBMAS Idoc goes into Error 51.
    The Error details is as below:
                                                                                    No authorization for changing vendor Centrally                                                                               
    Message no. F2326                                                                               
    System Response                                                                               
    You cannot access the requested data.                                                                               
    Procedure for System Administration                                                                               
    If necessary, include an entry in the user's authorization profile for  
        the authorization object and parameters specified below.                                                                               
    Authorization object:                                                                               
    o   F_KNA1_APP                                                                               
    Parameters:                                                                               
    o   Activity: 02
        o   Application authorization : *
    We gave the respective authorization object to the RFC User ID used in PI RFC created to connect to ECC.
    Also we have given the user id  Tcode authorization like XD01/02/03.
    But this error still persists.
    Request to throw some light on this.
    Cheers
    Dhwani

    Check these threads
    [Re: IDOC STATUS - 51 " IDOC HAS TEST STATUS|IDOC STATUS - 51 " IDOC HAS TEST STATUS";
    [Error Inbound IDoc - Status 51|Error Inbound IDoc - Status 51;
    thanks
    G. Lakshmipathi

  • Error in work flow wait for change event

    Error in work flow wait for change event of business object bus1014, Actually this business object is triggering for two transaction one is me21n and another is c201 . am trying to create fork with two branches one is create and another if change occurs wait will trigger, bt when i trigger work flow controll is not after fork, it will stop in fork only. and am not getting my workflow container variable getting instantiate, am getting error in wait. please any one get out of me in this

    Hi Sangeetha
    What is LV_MATERIAL? is it a BO container element? or a class element or a just a simple variable?
    Error message is clear, you are trying to evaluate LV_MATERIAL but it does not contain a value.
    This is a custom workflow as it begins with WS9xxxxxxx... what is LV_MATERIAL used for? what are we expecting it to hold? maybe, from event to workflow binding we can pass the value to it.
    Please share the following:
    1) Definition screen shot of LV_MATERIAL
    2) Screen shot of The step where it is first used - from SWDD
    3) Screenshot of Event to Workflow Binding
    4) name of your base Business Object (seen in the triggering events tab of the WF template in PFTC)
    5) What is the corresponding variable for that BO in your workflow container
    6) Screen shot of WF definition from SWDD - please identify the step going in error in that screen shot
    Regards,
    Modak

  • Error:Administration header could not found for support message

    Hi All,
    we are creating the support message in CRMD_ORDER transaction. we are getting an error, "Administration header could not found for support message" while saving. And also it is coming out of the transaction.
    The transaction type is SLFN.
    Please advise.
    Regards
    kumar

    Did you find the solution to this error? I am also getting this error and need to solve the same. Can you please help?

Maybe you are looking for