Cp1525nw and a Windows 2000 system

Is there a way to share a CP1525NW color laser printer on a wired network that includes a Windows 7 system and a Windows 2000 system? The Windows 7 system has no problem finding and printing to the printer but there is no driver available for the Windows 2000 system from HP. Is it possible to use the Windows 7 system as a print server that shares the printer so that the Windows 2000 can access the printer through the Windows 7 system?
Thanks in advance.

I used the CP1510 drivers instead.
1. A computer with a newer OpSys (XP in my case) has the CP1525 installed. Share it for others.
2. Download HP Laserjet CP1510 driver for Win 2000. Run the self-extractor. Extract and cancel installing. there will remain a folder with all the files in c:\
3. Open the printers window from control panel. Click Add Printer. Make it a local printer and Create a new port. Write the port name - \\computername\printerSharename and click next. Selecting the driver click Have Disk and choose the folder where the extracted driver for the CP1510 is situated.
Click next and it works like a song.
Good luck.

Similar Messages

Need to install officejet 8100 to a windows 2000 system. Can't find drivers.

I am trying to install an officejet 8100 on a windows 2000 system, and I can't find drivers anywhere. I was told that there are generic drivers out there that will work. Does anyone know where to look?

This page has some info on getting Java Se 6 installed...
Dreamweaver and Java SE 6 Runtime problem on MAC Mountain Lion OSX

I successfully deleted a user from my MacBook through the Users and Groups window in System Preferences. But now I cannot close the lock in the bottom left corner of the box. When I click on it, I briefly see a word that I think says "reauthorizing" but

I successfully deleted a user from my MacBook through the Users and Groups window in System Preferences. But now I cannot close the lock in the bottom left corner of the box. When I click on it, I briefly see a word that I think says "reauthorizing" but the word flashes too quickly to tell for sure.

If you are admin.
Try restarting your Mac.

Is there a VI to monitor CPU and memory usage on wINDOWS 2000 system ?

I want to monitor CPU usage and available memory for Windows 2000 computer. Is there a VI that can call the task mngr. via a DLL to provide this information in real time ?

There was a nice example using .NET technology, but it seems the link has changed and I cannot find it anymore. See this older thread for some clues.
Does anyone know what happened to the target of the original link in my old post?
Edit: Found it here.Message Edited by altenbach on 04-29-2005 12:42 PM
LabVIEW Champion . Do more with less code and in less time .

Oracle 9i and upgrade Windows 2000 to Windows 2003

Hi,
We have a Oracle 9i (9.2.0.6.0 Enterprise Edition) running under Windows 2000 and the OS group is going to upgrade to Windows 2003.
My question is: will Oracle keep working?
I hope so because we are not allowed to upgrade to 10g or 11g and I think Oracle 9i for Windows 2003 can't be downloaded anymore.
regards,
Ivan

Rajesh wrote:
No,you have to upgrade your database(startup upgrade) or compile all invalid objects,using above sqls due to your OS version changed and your cold backup shoul be startup upgrade/migrate option.This is not required.
Please refer to :
Process To Upgrade the Operating System and Oracle Database Server [ID 407055.1]
Procedure When Upgrading Windows 2003 Operating System From Standard To Enterprise Ed. [ID 798175.1]
RegardsRajesh
Please see your suggested doc
- Take a cold backup of you existing database before you start OS and DB upgrade .
- Upgrade the Operating system (refer your OS documentation for detail)
- Execute 'relink all '
- Verify that the existing database is working fine with the upgraded Operating system.
- Take one more cold backup before you start Database upgrade
- Install Oracle Software (to which you want to upgrade) in new oracle home.
- Upgrade database (refer the upgrade/migration guide for complete instruction ) *Process To Upgrade the Operating System and Oracle Database Server [ID 407055.1]*
It means you need startup upgrade/migrate.

Authentication EAS and PLanning/Windows 2000

Hi, I’m trying to Configure Business Rules. But, before this, isnecessary to configure External Authentication for Planning andEAS. I don’t know how to do this because I’m installall things in my machine (Windows 2000 Server), then I don’tknow what kind of authentication I have to use, how to configurethis on my machine. Anyone knows something about it, please? Thanks! 

What version of planning and essbase you are using..if you areusing pre-system 9 then HBR comes along with planning and you needto configure repository for both HBR and GHBR(graphical) ..you needto to give EAS user id and passord for HBR setting and Essbase userid and password for GHBR setting ... If you are using system 9 then HBR comes along withEAS ...You need to register EAS to shared services beforegenerating peropeties file..So when you generate peroperties fileit would generate HBR.properties and send notification to HBRserver and you would be able to work on HBR ..

Can I connect a Storedge DDS-3 to a Windows 2000 system?

Hello,
I can buy at a good price a Sun StorEdge DDS-3 12-24gb 4mm tape drive, and i was wondering if i can install it in a computer with the windows 2000 professional.
Many thanks!
Miguel Andrade

Hello Miguel,
sorry for returning so late to your question !
The drivers depend only partly on the DDS-3 drive.
Have you installed the driver for the SCSI-controller (Adaptec, Symbios Logic, etc.) ?
If yes, is the tape drive displayed under SCSI devices ?
Next step: Detect the tape device (icon on the control panel), which will add a second driver but now for the tape device.
The reason why the driver for the tape may be depend on the manufacturer of the drive, ist that for example HP has added some code to use the additional capabilities of their drives. But the generic tape driver (DAT) should also work.
Michael

Renaming files on both iTunes and the Windows file system

I use the voice memo app on my iPhone to record things and sync them to my laptop with iTunes. In the past when I renamed the files from the date/time default inherited from the phone, the change was copied to the file stored on the laptop -- so I could change the name to "Joe Bloggs speaks" and then find the file in the iTunes folder on my machine with the same name. Since upgrading to 10.5.1, this has changed. Now I alter the name in iTunes and when I click on "find the file in Windows Explorer" it still has the orginal date/time name on the M4A file. Is there something I can tweak to get back the useful function I had before? Or can somebody in Apple make sure this is function is restored in the next iTunes update.

Under the Edit > Preferences > Advanced tab do you have Keep iTunes Media folder organized? If not then iTunes won't move/rename files as you edit them.
I'm not able to check myself just now, but I suppose it is possible that renaming has been disabled on Voice Memos so the original date & time can be recovered from Explorer and it would stop voice memos moving into your music folders after an edit instead of being in a predicatible location.
tt2

No Sync IPod with 7.0 ITunes and using Windows 2000.

I've been up and down the search to find sync the IPod up with ITunes 7.0 but everything seems to be with XP. I have W2000. Does anyone know what needs to be done so I can sync up? Sometimes it works and sometimes nothing. Mostly nothing.
TNX........

Have you tried these several things?
++Reset your iPod (hold the Menu and center buttons together).
++Put your iPod in disk mode, then connect it to your computer.
++Try restarting your computer, then connect your iPod.
++Save your iTunes library, and completely reinstall the program through "Contro Panel -> Add or remove programs" area.
++unplug all other USB devices that are connected to your computer, then connect your iPod.
++See if your iPod is low on charge. If it is, eject it through the Safely Remove Hardware program, and leave it connected for an hour. After that, unplug it, and connect your iPod again in disk mode (see above for details).
++Close iTunes. Try going to Task Manager, to the "Processes" tab. Find these names: "iPodSErvice.exe", "iTuneshelper.exe", and "iTunes.exe". End all of these processes. Reset your iPod, connect it, and open iTunes.
++Have you tried resetting your iPod while connected to your computer?
++Have you tried assigning your iPod a different drive letter? See the steps here -> Assigning your iPod a different drive letter
++Have you tried to complete all the Five R's? REad more about it here -> the Five R's
++Also, you may want to consider going back to iTunes 6. You can find the download of the previous version here -> Download iTunes 6.0.5
++All the suggestions in this article? -> iPod is recognized by Windows, but not iTunes
++Also, see if this is a possibility -> Fast user switching
I'm not sure if you've tried those or not, cause that's just some possibilities I can think of now. If you have any problems with those, post back with the details of your issue, and I'll try to help.
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

IP/TV 3425 Windows 2000 system crashed

Hi,Dear
It can't startup any more.
If there any method to repair it,or,have to send to CISCO to solve this issue.
Would you pls give me a help to my mail :
[email protected]
Thanks a lot for your replies.
Jason

Cycle the power, when the boot message appears in the upper left corner, press and hold the "f" key.
That should cause a new image to be reloaded from the recovery partition (follow the prompts).
Good Luck
Scott

My icould on my windows 7 system stop working and the refresh notification tab has disappeared, my icould on my windows 7 system stop working and the refresh notification tab has disappeared

My iCloud on my windows 7 system no longer work and the refresh icon in outlook 2010 has disappeared. I have deleted the applicaton and reinstalled it and still no luck. How can I get this device to work with iCloud again? It was working great!

Thanks, Allan, but I am embarassed by my own ignorence. For better or undoubedly worse I am a PC person and I wouldn't know a Snow Leopard from a field mouse. I just know that about four or five years ago someone developed a procedure that involved moving a half-dozen or so Windows 2000 system files (that did support AppleTalk) to Windows XP systems whcih then gave them the same capability.
Since this 2000 ==> XP has worked so well for so long, I was just hoping that someone might have developed something similar for Windows 7. I can handle an answer ot No, but first I have to ask the queston.
Sub-Question: If not Appletalk, how else can I keep my Pro 630s as productive members of my PC-based Ethernet network?

Why will a stand alone executalbe with an installer work on windows 2000 and crashes on windows xp professional?

When I run the setup.exe file on a Windows 2000 system it installs properly, but the same file run on a XP Professional system I get an error stating Fatal Error: Installation ended prematurely because of an error.
See here for more information on the specific installer I'm trying to use.
In fact I get this error for any stand alone executable I try to install on any XP machines. I am using LV 7.1. Is there a way to manually install eve
rything?
Thanks

Sure you can Install a lv application manually. just copy the exe-file,
support files in a folder. For the runtimeengine just copy the file
lvrte.dll in the folder of your application or in the windows system folder.
Hope that helps, Niko
BB Herman wrote:
> Why will a stand alone executalbe with an installer work on windows
> 2000 and crashes on windows xp professional?
>
> When I run the setup.exe file on a Windows 2000 system it installs
> properly, but the same file run on a XP Professional system I get an
> error stating Fatal Error: Installation ended prematurely because of
> an error.
>
> See
> HREF="http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000...
for more information on the specific installer I'm trying to
> use.
>
> In fact I get this error for any stand alone executable I try to
> install on any XP machines. I am using LV 7.1. Is there a way to
> manually install everything?
>
> Thanks

How to download and use iTunes 7.4 with only Windows 2000

I have a brand-new iPod Nano (1st generation) with 4 GB capacity, given to me in 2007. I am just getting around to trying to install and use it, but when I try to download the iTunes 7.4 software, I get a message that I need at least Windows XP or Vista to install and use the software with the iPod Nano. I only have Windows 2000 on my computer, which is company owned (so I am not allowed to update my Windows software). Anyone have a solution so that I can get some level of iTunes software in order to use the iPod Nano?? PS I tried to download iTunes 6 software, but I got a message that my iPod nano needed a more recent version of the iTunes software. Same thing happened when I tried to download the iTunes 8 version of the software.

download and install http://www.mediamonkey.com/ its free
I just bought a 4th gen nano today, and running windows 2000.
This was my first ever Apple product, and i was pretty angry when i ran into the same problem as you. with some frustrating research I found MediaMonkey and listening to my new iPod as i type this

Can i back up my mac and windows operating system on the one hard drive?

Hello everyone, i use a 4TB external hard drive to back up my imac. I recently installed Parallels and Windows 8.1 so I can run a PMS for my business. Now that i have installed Parallels and windows 8.1 on the mac can i format the drive so it will back up the mac and the windows operating system? Thanks!

If you want to back up with Time Machine, you need a GUID partition table and an HFS (Mac OS X) partition. If you can also create a Windows partition without destroying the partition table, then you can use the same drive for both systems. I can't give you specific instructions for Windows.

Best wireless security for mixed Mac OS X, Windows XP and Windows 2000

While I am posting, I may as well ask this question too.
It seems that WPA/WPA2 are only supported by Windows XP or later.
But I also think I read somewhere that there are different flavours of WEP for Macs and Windows.
For a home network based on AE, what is the best form of wireless security to handle 2 Macs (iMac and MacBook Pro), a Windows XP and a Windows 2000 notebook (all running wireless G).
Thanks

Thanks for the suggestion Michael - unfortunately software changes to the Win2k machine are not an option for me - it has been completely locked down by my corporate IT dept.
So I think I am stuck with WEP. From scouring the Apple tech discussion posts it looks like a five letter ASCII or thirteen letter ASCII password in WEP are my only options, but I am not sure which of these is most appropriate for all 4 machines.

Cp1525nw and a Windows 2000 system

Similar Messages

Maybe you are looking for