Cp1700 - Any problems with switching existing printer with stored printer?

I am having problems reading the LCD panel for my cp1700 (not all the text shows - common problem). I have another cp1700 that I have had stored for about 5 years (saving for parts. I think this "stored" printer squeaked when printing). I considered switching the LCD panels but it looks as if this is a complicated procedure. So I am wondering if I will encounter any problems with switching the printers? I will be putting in new ink cartridges but wondering if the printheads will cause a problem after being stored for so long?

This don't completely resolve your concerns, but I've had no trouble printing from OS X 10.7 to an Epson Artisan 810 connected to a Mac running OS X 10.6.8. I may even have been able to print to it wirelessly, but I can't remember. Apple issued an update to the Epson printer drivers fairly recently, which one would hope would have addressed any issues. In any case, I'd make a bootable clone of your Mac before you upgrade. If things aren't as you hope, then you can restore the clone to your main disk drive and be back with OS X 10.6.

Similar Messages

Problem on switching tab control with wmp around

Hi,
I have search through the forum but still not able to find out the solution for my problem here.
I have wmp play around, everything works fine but when i pause the movie, which going to switch to tab control page 2 but somehow the screen of the movie is still around, so any idea how to avoid the screen to be appear on the tab control page 2.
Attach with vi here.
Thanks in advance.
Regards,
Simon
Attachments:
WMP4.0.vi ‏79 KB

It looks like this is bad news for you. This is a known issue and has been for a long time. Look at the link I provided.
http://forums.ni.com/t5/LabVIEW/Media-Player-in-Tab-Control/m-p/527919
Tim
Johnson Controls
Holland Michigan

I cannot add any bookmarks to my existing ones with the new 30.0 firefox.

I updated to firefox 30.0. Now, I can't create any new bookmarks. I've clicked on the little star icon and it bops over to the clipboard icon. However, when I check for unsorted bookmarks it does not appear. I have checked in the bookmarks button at the top of the page and it shows up nowhere. I've never had a problem with bookmarks before and have sorted them into many folders. I have tried several things, and no matter what I have done I cannot create a new bookmark. I reset firefox to default, but this still did not fix my bookmark problem. I tried erasing a few bookmarks to make room, but that didn't help. I tried dragging the address straight into my folders. This used to work on the old version. Now, no matter what I do I cannot create a new bookmark. This is very frustrating. I wish I hadn't updated. My MacBook Air is less than a year old and uses OS X.

You can check for problems with the <b>places.sqlite</b> database file in the Firefox profile folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
*Places Maintenance https://addons.mozilla.org/firefox/addon/places-maintenance/
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)

Any problems in syncing iPod Touch with new computer?

My wife's iBook died and now I need to switch her to a newer computer. She had been syncing her iPod Touch with the old computer and she also has an iTunes account. During the down time she has been entering calendar data directly into the iPod Touch.
When I get her backup data into the new computer what kind of problems will we encounter? Will it correctly sync her calendars and contacts? Can she move or close her iTunes account from the new computer? Thanks.

Before you scrap the old one, go into iTunes and deauthorize the computer. When you get the new one set up and ready to go, go back into iTunes and authorize the new computer.
I'm not sure how you plan to transfer your library, but a portable hard drive or a big memory stick do work well. Don't forget to copy over the xml file as well as that will preserve your settings in iTunes.

Problem in Integrating Existing Application with Portal

I have my existing application. When i tried to integrate it with portal by URLScrapper Channel, my existing applications are logging me out.
My existing applications have different user / password for logging into it. Once i try login, i am not able to log into it. I hope there is some problem in session. Can anybody tell me how can rectify it.

Guys can u explain ,how to set the cookies in the session
Bcoz i am also facing the same problem when i am integrating the portal with my application.
I am able to login to the application , but when i do some operation it logs me out of the appliation .
guys can u throw light on this issue.

Any problems running a program compiled with SDK 1.4.2_14 with JRE 1.4.2_08

Hi,
Would there ever be a problem running a program compiled in Java 1.4.2_13 with JRE 1.4.2_08?
Why or why not? No guesses please.
Thanks

No such hope. The alternative to testing is to review changes made to each version leading up to 14. This is spelled out in each version's Release Document. There are a lot of changes. Most will not affect your program. Each change is relatively well described, but your problem will be to decide if your program will be affected by the change.
Or, do nothing, hope like hell that nothing breaks, and have an up-to-date copy of your resume.
If someone came to me saying a program couldn't be tested, I'd have serious concerns for that person's future.

HT201328 I am going to India, the ATT says the is unlocked and follow the procedure back up,erase,insert new sim,restore. Is it that simple? Will there be any problem when igo to India with local SIM card? How to find out compatibility of local SIM car

I am going to India. ATT says phone is unlocked. Can I use local SIM card to use my i phone5? Will there be any compatibility problem.

If AT&T authorized your unlock, you received the email from them giving you instructions to unlock and you followed those instructions, followed by a message in iTunes saying Congratulations, your iPhone is now unlocked, then you will have no issues using a local SIM. However, your warranty is only good in the US, and it may not support all of the bands in India, especially LTE.

Any Problem Running Office 2010 SP2 with Project Server 2010 SP1?

We are running Project Server 2010 SP1 April 2013 CU and the desktop clients have now been upgraded to SP2 October 13 CU. We are having issues with projects in local cache showing as checked out when they are not actually checked out on the server. I was
wondering if it is problematic to run the desktop client on a newer service pack than the server and if it could cause this type of issue?

Hello, Aaron.
The answer is YES, you'll probably have some issues.
I would recommend:
Downgrade clients to match Server's version
Upgrade Server to SP2+October '13 CU
And my preferred:
Upgrade Server and clients to SP2 + '14 April CU

GTX 970 4g OV max limit...any problem with that??

Hi, my 970 stock voltage is 1,212v and the ASIC is 65,4% (quite low) and vbios 84.04.2f.00.f1 ...in afterburner, despite there is a slider from 0 to +87v it seems like there is only 3 steps in voltage increase...for me they are:
+0=1,212v
+0 to +25mv=1,237v
+25 to +87mv=1,256v
-Is it SAFE to run the card at 1,256v 24/7 (obviously only when gaming)???
-Why the slider is not applying the voltage in increments as slider indicates??, I mean, +37mv should be = +37mv voltage increase right??
-And the most important thing...ONLY when voltage reach 1,256v I see in the graphs that the OV MAX LIMIT = 1 all the time (or most part) so I wonder is its SAFE to run the card with ov max limit =1???...according with the 1,256 I think there is lots of people running the card this way but not sure if ov max limit =1...
Finally, I can run the card at 1486Mhz core (+170) and 3507Mhz memory (+0) at +25mv (1,237v) without the ov max limit at 1 should I leave the card just there???
Many many thanks guys!!

Quote from: watermanpc85 on 28-April-15, 19:22:29
Thanks for the reply...I dont know hopw to upload the actual bios file but I recently updated the bios to the .186 version (latest)...now it says 84.04.36.00.f1.
The vbios version is NV316MH.186 the numbers from gpu-z (84.04.36.00.f1) are irrelevant and do mean nothing.
Quote from: watermanpc85 on 28-April-15, 19:22:29
So I asume that there is not any problem by running the card with OV max limit=1 right???(as soon as the voltage is 1,256v)...anyway right now is a non sense for me because as soon as I increase voltage to 1,256v the card reaches max TDP limit and then it throtles...I would need to increase the TDP limit then...I have researched in the net but I cant find I CLEAR solution on how to increase the little 10% default...is there any "easy" way to do it??
It just means that you reached the point where no more increases are possible.
For increasing power limit further than is allowed by default a vbios mod is required that comes with a risk and voids warranty. If you are not familiar with vbios mods than there is no safe and easy way.

APEX application development with an existing data model

Dear all,
We - as a company - are trying to build an application in ApEx with an existing data model. The idea is that the data model that has all sorts of TAPIs and business rules defined is going to be re-used in an ApEx environment. I am actually wondering whether this is possible, wise, feasible. When I am building some simple pages on one specific table, which has approx. 35 fields, sometimes the triggers around that table fail. Before I am actually going to dive in to try and sort these problems I am wondering whether this use of a data model in an ApEx environment is wise.
I mean, when you build an ApEx application there are usually no triggers and TAPIs available. My logic is that the ApEx application can look after validation and stuff.
Does anybody experienced have anything smart and useful to say about this. Any feedback is appreciated.
Kind regards,
-victorbax
-leiderdorp, the netherlands

Hey vik,
At my company we rarely use the standard APEX wizards because of multi-linguility (on data level) and error management issues.
We always create an API in PL/SQL and call the procedures for APEX making APEX the 'view' layer in a kind of model-view-controller architecture.
The main thing to keep in mind is maintainability, if you're working with an existing datamodel with an API that works it's probably best to just created forms and reports through APEX and then calling the appropriate pl/sql (packaged) procedure manually. We believe that this kind of architecture has the downside of being a little more work initially but it's much easier to maintain large projects through a self written API and take care of issues like error handling, logging and multi-linguility through a self written API.
Kind Regards,
Geert Guldentops

Hello everyone! Did you find any problems so far using hotspots?

Hello everyone! Did you find any problems so far using hotspots with iPhone 4?

Just the usual ones in dealing with some routers with buggy firmware and such.
I'm sure there have been many who have had problems, but mine has worked beautifully at a wide variety of hotspots like those at McDonald's, Starbucks and Borders.

Long delay printing to shared printer

I have a HP C4180 connected to a Windows 7 PC via USB. The printer is being shared by this computer. I have added the printer to another Windows 7 computer on my network via Add Network Printer option in Windows 7. Initially I was able to print just fine to the printer via the network share. However, now when I try to print to it, the printer does not print. The computer that it is connected to is turned on and shows the printer as ready. However, the WIndows 7 windows to "see what's printing" does not show any documents in the queue. This is the case on both computers. Now I can print from the computer that is connected directly to the printer without any problems. For some reason the network printing is what appears to be broken. I have tried deleting the printer and then re-installing it on the client PC,. This works for awhile, but then after several days the same problem occurs again where it does not print. Sometimes, documents that I send to the printer will print after a long period of time goes by (sometimes 30 minutes or more), but other times it does not print at all.
I am really stumped on why this is hapenning. I have uninstalled the HP drivers on all comptuers and then tried to re-install them, but the problem still exists. I am thinking that this problem may have started when I enabled Windows 7 Homegroup, but I am not certain if that is the case or not. I am out of ideas and need some help please.

banhien wrote:
Hi,
There are some suggestions in the following link, mainly to do with the router.
http://forums.techarena.in/windows-xp-support/920139.htm
Hope this may help.
Looked over the suggestions. The only suggestion that may have been hopeful was the DNS router setting. However, my Westel DSL Modem/Router does not have this setting anywhere to be found on the web interface that it exposes.
So far, I still have no idea how to correct this problem.

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

Anybody has any problems with installing and printing with canon lbp6650dn?

hi,
i bought a new i-sensys lbp6650dn and i am trying to make it work with my macbook 10.5.8. the installation cd that comes with it does not work with mac. i downloaded the latest drivers from canon's website, and could add the printer to my list.
computer's connected to the printer with USB. both the computer and the printer show no error, but whenever i try to print a document it starts printing jumbld letters and numbers that look like programme codes. moreover, it prints around 20 pages for a 1-page document. does anybody know what the problem might be? i am not sure whether there is something wrong with the computer's settings or the printer's. it's the first time installing a printer is giving me such a hard time. any help would be much appreciated.
thanks!

Try reseating your memory. Sometimes this occurs when the RAM is not seated all the way in the slot.
You could also boot from your 1st install disk while holding down the D key. Then run the diagnostics on your MacBook.
Message was edited by: First Magus

My phone although fully charged has just switched itself off and won't turn back on again! I'm just coming to the end of a 2 year contract and never had any problems with it. Help please!

My iPhone 4 although fully charges has just switched itself off and won't turn back on again. I've tried taking the sim card out but nothing happens. I'm just coming to the end of a 2 year contract and never had any problems with it before. Help please.

Start here
http://support.apple.com/kb/HT1430

Cp1700 - Any problems with switching existing printer with stored printer?

Similar Messages

Maybe you are looking for