CP2025- Duplex printing not working anymore

I have been using for more than 8 month my CP2025 in duplex with very good results.
Nontehless, this last month I had only problem.
Printing in duplex, I have the first page well printed, and on the second page, it prints only the fist leaf and then stops. I have a message indicating a misprint (with no other information), I press OK, it restars for 2 pages.
That is very ... annoying.
Anybody had this problem?

He Daniel.
The standard HP ePrint feature does not support Duplex printing, I would assume that the same applies for HP ePrint Enterprise:
Are there any limitations that I should be aware of when using ePrint?
Duplexing (printing on both sides of the page) is not supported.
http://support.hp.com/us-en/document/c02882571
I suggest ensuring a such in the commercial forums, there are more expertize users for such a subject:
http://h30499.www3.hp.com/t5/HP-Designjet-ePrint-and-Share/bd-p/hp_eprint_and_share#.VPGA7oJOj5w
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

E-print not working anymore

the e-print was always working fine for me.
the last weeks there were some problems, but when I logged in there was a problem with the HP-cloude.
Now I tried again, but e-print is not working anymore AND I can't log in anymore.
when I log in a see my page, but there is always the overlay of the login screen. See the screndump.
I installed new HP-software etc. but nothing helps.
How can I log in again?
Can't see this problem in the list???

when I start with the URL: www.hpconnected.com I automaticly get the URL: https://h30495.www3.hp.com/c/46502/NL/nl/
then, when I log in I got always the screens as you can see in my firts question.
when I use google chrome with HPconnected.com I stay on the right URL. I can Log in correctly.
I see my printer with a message: Problem with printer look at the immages
second: when I look at the printerscreen and try to connect with the webserver I got the message: Printer can not connected to the server. I can use the printer normally at home. Printer is connected with cable to the network

HP LaserJet 1320 Duplex Printing Not working with Windows 7

Hi
I've just bought a new PC with Windows 7 Home Premium. I have an HP LaserJet 1320 printer (Prod no. Q5927A, SN CNGW53RLRY).
I cannot find driver that works the same way as the previous driver HP LaserJet PCL5. If I use this driver and can still get duplex printing but it will only print one copy at a time.
If I upgrade to HP Universal Printing PLC (or PLC v5) I can print multiple copies but not duplex printing. I have searched high and low through the HP site but to no avail.
Any help and advice will be much appreciated.
Thanks
GB

Hello,
I've seen this same issue with my printers (other HP printers) whereby the default setting to support the Duplexing hardware was set to 'off'.
A quick method to check this is look at what the setting is for Duplex hardware in the Device Settings tab, and if it's not set, correct it.
Printer Properties:
From the 'Start' orb -> [Devices & Printers] -> right click on your Printer icon -> select 'Printer Properties' -> click on 'Device Settings' tab.
You should see a dialog similar to the mine (attached): look for the 'Duplex unit (for 2-sided printing)' and see if it's set to "Not Installed":
--> in either case, click on 'Not installed' and from the dropdown box, select 'Installed'... Click 'OK' to accept the changes and close the dialog.
Printing Preferences:
again, right click on your Printer icon -> select 'Printing Preferences' -> click on 'Advanced' tab.
-->Check to see if there is a 'Duplex Hardware' or '2-sided printing' option in here: mine doesn't show one but thougth I'd mention it nonetheless.
Click on the 'Finishing' tab and select 'Print on both sides'...or simply test print a multi-page document and set those preferences on-the-fly.
Let me know if this helps...
HardCopyTed
Regards,
HardCopy (I am employed by HP) [If this was helpful, please mark this 'Solved' or 'Accept as Solution' so others can find this too]
How to Give Kudos | How to mark as Solved
Attachments:
PCL6-DeviceSettingsScreenCap.JPG ‏81 KB

Automatic Duplex Printing not working on HP Color LaserJet 3600DN in Windows 7. It worked before.

I have an HP color laserjet 3600 DN on Windows 7. This computer came w/ Windows Vista and a 3600DN driver was installed and the computer was upgraded to Windows 7. The printer did automatic duplex printing.
At one point, my computer indicated that it could no longer find the printer. In an effort to solve this problem, I uninstalled the printer. When I tried to reinstall the printer the computer could not find the driver. At that point I tried to download a windows 7 CLJ 3600 DN driver. Since HP doesn't provide this driver for Windows 7, I tried to download the Windows Vista driver for 3600DN.
However, when I go to the appropriate webpage by following the links, only drivers for Color Laserjet 3600 are listed (no 3600DN drivers).
As far we can tell it only allows Manual Duplex printing (no automatic duplex printing). Clicking the "Two Sided Duplex Printing" option is there but only works when the "print on both sides (Manual)" is set on the Finishing page. If manual is turned off, then it becomes single sided.
Can I get a driver that will allow me to do automatic duplex printing on on my HP CLJ 3600 DN using Windows 7?

How did you replave the duplex belt? How to deassemble the backside of a officejet and click the new belt on? I can't see nor do it y self

HP Officejet Pro 8600 Duplex Printing Not Working

I am running Windows 7. Duplex printing is not working on my Officejet Pro 8600. It has worked in the past, but I cannot get it to work now. I have reset the printer and restarted by laptop. I have not made any changes that should affect the duplex printing. Thank you.

Hi there beachlover.
Hope you are doing wel and welcome to the HP forums;
The Hardware Diagnostic tool can help you find common hardware issues and in most occasions fix them Give it a try by going to this link www.hp.com/go/tools Let me know the results and include any errors that the utility finds
I will try my best to help you .
RobertoR
▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Officejet Pro 8600 Plus duplex printing not working

I am running Mac OSX leopard (10.5.8) and just bought the officejet pro 8600. Everything seems to work great except I can't figure out how to print on two sides. The option isn't allowed in page setup
I have checked the settings on the printer and can't see anything to indicate how to switch on the option for double-sided printing.
Thanks in advance for the help.
This question was solved.
View Solution.

Hi,
Please follow the steps below to configure the driver for automatic duplex printing:
1. Verify the duplex-printing accessory has been installed properly. To verify this open the System Preferences and go to Print & Fax. Open the print queue of your printer. Click on Printer Setup and from the tab menu choose Driver. Verify the box next to HP Two-sided Printing Accessory (Duplexer) is checked.
2. On the File menu, select Print. The Print window appears.
NOTE: The Print window might be minimized. Click the blue triangle next to the printer name to see all available settings.
3. In the expanded Print window you will find next to Copies the checkbox for Two-Sided. Check the box.
NOTE: If the checkbox does not appear within the specific application print dialog, skip this step.
4. To select the binding type click the lowest selection box listed as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
5. Select Layout from the drop-down menu.
6. Set the Two-Sided option as Long-Edge binding (Portrait), or Long-Edge binding (landscape).
You may save the settings for future use by clicking Presets > Save Current Settings as Preset...
Please let me know of any problem,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Duplex Printing Not Working - Brother HL4570CDW

Hey all,
I managed to get a network printer setup and it works; however, the only thing that isn't working is duplex printing. I installed the driver from AUR: https://aur.archlinux.org/packages/brother-hl4570cdw/
In my default options I have "Two-Sided Printing" set to "Long-Edge Binding". But the CUPS printer page at localhost:631/printers/metafont (where metafont is the name/URL of the printer) shows me:
Description: metafont
Location: metafont
Driver: Brother HL-4570CDW series CUPS (color, 2-sided printing)
Connection: lpd://metafont/BINARY_P1
Defaults: job-sheets=none, none media=na_letter_8.5x11in sides=one-sided
What concerns me here is the sides=one-sided, I have a feeling that's a problem. In any case, I tried to print a PDF using evince and in "Page Setup" it tells me that the two-sided option is "Not available" and I also tried to print from the command line and adding the "-o sides=two-sided-long-edge" option but that didn't work either.
Any help would be appreciated!

He Daniel.
The standard HP ePrint feature does not support Duplex printing, I would assume that the same applies for HP ePrint Enterprise:
Are there any limitations that I should be aware of when using ePrint?
Duplexing (printing on both sides of the page) is not supported.
http://support.hp.com/us-en/document/c02882571
I suggest ensuring a such in the commercial forums, there are more expertize users for such a subject:
http://h30499.www3.hp.com/t5/HP-Designjet-ePrint-and-Share/bd-p/hp_eprint_and_share#.VPGA7oJOj5w
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP 6500 printer not working anymore via Time Capsule

I used a Linksys access point, and all my printers and Airport Express were working fine.
But since I swapped my Linksys WRT160N v2 access point with the Apple Time Capsule, my HP 6500 printer cannot be installed anymore on my iMac.
I have a very flat network :
Telenet router connected to internet, other side : wired Time Capsule (and then wireless to my iMac, iPhones, iPad and Airport Express), wired ethernet switch with wired Brother Laser printer and wired HP 6500 printer. All having fixed IP addresses (except of course the iPhones and iPad).
When adding the HP printer the iMac system finds the printer as "Officejet 6500 E710n-z (59F608)", but gives an error "Unable to communicate with the printer".
And to make it totally weird : I'm perfectly able to address the printer from the iMac via ip address in Safari !!
No double IP addresses are used in the network : swapped the network already several times with different tools.
Regaring the Airport Express, I cannot set it up again, the light flashes and is not recognised anymore.
My biggest concern is the HP printer ... weird ...
Please advise !
tx a million

Did you completely remove all earlier instances of the printer and even its drivers. If not do so.. after reboot of the iMac download direct from HP any new drivers they may have and reinstall. We have seen it on other occasions.. it is very stubborn if it has any previous setup or drivers.
When you swap the two routers.. are you keeping the old IP addressing scheme.. ie moving TC from its default 10.0.1.1 to the Linksys standard 192.168.1.1 .. as occasionally again.. devices can sometimes be finiky off their default.

Psc1510 and duplex printing not working

I have windows 7 64bit and all is ok, but when I try to print with duplex setting, the printer start its work without asking me to reload the already printed page.
In XP, this feature works great.
thanks
Message Edited by axoduss on 10-05-2009 12:25 PM

He Daniel.
The standard HP ePrint feature does not support Duplex printing, I would assume that the same applies for HP ePrint Enterprise:
Are there any limitations that I should be aware of when using ePrint?
Duplexing (printing on both sides of the page) is not supported.
http://support.hp.com/us-en/document/c02882571
I suggest ensuring a such in the commercial forums, there are more expertize users for such a subject:
http://h30499.www3.hp.com/t5/HP-Designjet-ePrint-and-Share/bd-p/hp_eprint_and_share#.VPGA7oJOj5w
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Duplex printing not working after installing HP Printer Driver Update 1.1.1

Hi,
our printers (Lexmark T622, HP Laserjet 2200, both equipped with a duplex unit) are managed by printer queues on our Mac OS X Server (10.5.5). Our users (mostly having Mac Books running 10.5.4 or 10.5.5) are printing by sending their jobs to the queues on the Mac OS X Server (via IPP/TCP/IP).
So far so good.
It seems that the users who have installed the "HP Printer Driver Update 1.1.1" aren't able to do duplex-printouts anymore. All sheets that leave the printers are printed on one side only - the "Duplex" setting by these clients is just ignored. Users who haven't installed the update yet, don't have the problem (at least it seems to me like this, but I have to admit that I've tested it with only three different Mac Books, yet).
My questions are:
- Has anybody else observed this behaviour, yet?
- Or, even better, does anybody have a solution to it? Reinstalling the printer on an affected client doesn't solve it. That's what I tried already.
- Is there any possibility to make the printer driver update "undone", which means to do a kind of downgrade from 1.1.1 to 1.1?
Thank you very much in advance!
Best regards,
Steffen

Hi,
it seems that
http://discussions.apple.com/thread.jspa?threadID=1715794&tstart=0#8157481
fixes my problem.
Best regards,
Steffen

MG 5350 printer not working anymore.

I recently purchased the MG5350 series printer and after setting it up it worked perfectly. A few days ago I was trying to print from my iPad and it said no printer is available. My desktop computer also said the same message: "THE PRINTER IS NOT CONNECTED."
I have looked through the settings and the printer says it is currently on the same network as our other devices, but still not printing. Please help!!

Instead of using Bonjour - try setting up printing manually by following the procedure described at http://www.efelix.co.uk/tech/1004.html

OfficeJet J6480 Duplex Printing not working

Duplexer is installed correctly with my OfficeJet J6480. When I try to print a two sided page using AUTOMATIC setting, it prints a page and pushces out the page without rolling it back to print on the other side. Any input on correcting this issue?
I have the latest drivers installed.

Hi, I had the same problem. There is a setting on the porperties page for your printer. Right click on your printer and select printer properties. When you get the properties page, select the Device Settings tab. Make sure the Duplex Unit (2 sided printing) is set to Installed.

Canon LBP6200 Printer not working anymore after update to 10.6.7

i dont know if this is to do with mac osx or canon's printer
i try reinstall the driver but it just dont work
obviously, apple need to work with canon to solve this problem
hope for a update coming soon enough
cannot live without my printer

I bought a Canon LBP3100 three weeks ago. It was working fine until I updated to 10.6.7 this morning. I spent a good part of the day talking to Canon and Apple support. It is clear there is an issue with the driver under the latest operating system. Canon said they didn't even know there was an update out and hadn't a clue when a fix will be available. Apple advised me to reinstall 10.6.6 which I am reluctant to do. In the meantime I'm left without a useable printer in my office. So much for customer service. Something has gone badly wrong somewhere.

Adobe Reader XI 11.0.10 duplex printing not working

I am trying to print a pdf two sided. My operating system is Windows 8.1 Pro and I am using the Xerox Work Centre 5875 printer. The settings on the print driver are set to default print 2 sided and in adobe reader two sided printing is checked off but it still comes out 1 sided. Printing double sided works in all other programs. Please help.

Hi satsugyo1,
For printing both sides, you might also need to enable 'printing on both sides' option in Reader print dialog box.
Please do the same and then print your PDF.
Let me know how it goes.
Regards,
Anubha

HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

CP2025- Duplex printing not working anymore

Similar Messages

Maybe you are looking for