CP2025 MAKING REPETITIVE MARKS AT EVEN INTERVALS

I have a HP Color Laserjet CP2025 connected to a network, which has recently started making a small reptitive mark in magenta at 1 1/8" intervals in a straight line from the top of the page to the bottom (just right of center). I have preformed all the rcommended tests (checked to see if if the paper type is set correctly, run the cleaning cycle and printed a print-quality diagnosyics page), and can only assume that I need to replace the magenta cartridge. This seems crazy since the cartridge is realitively new. Is there a less expensive solution? BTW, the mark goes away when printing with black only.

Registration colored crop marks will make an otherwise black and white page "click" as a 4/C page, thereby accruing color charges from the machine vendor when you can only charge your client for B&W.
In CS6 or later you can export a PDF/X-4 to a grayscale destination and get a 1-color PDF.
So in this export preset I have the destination set to Black Ink Coated GRACol grayscale profile. My document's assigned CMYK profile is Coated GRACol and my Appearance of Black Preference for printing and exporting is Output All Blacks as Rich Blacks:
The exported PDF is black only including the crop marks and color bars:
By default the generic Photoshop gray profiles (i.e. Dot Gain 20%) are available when Convert to Profile is chosen. I saved the Black Ink GRACol .icc profile from Photoshop by loading CRACol Coated CMYK as the Working Gray profile, then choosing Gray>Save Gray... and saving to my system's profiles folder.

Similar Messages

The app icons and font on my iPhone 4 just went to massive making it difficult to even scroll how can I change it back, where do I go which menu? Thanks in advance

The app icons and font on my iPhone 4 just went to massive making it difficult to even scroll how can I change it back, where do I go which menu? Thanks in advance

Next time you accidentally use 3 fingers it will zoom again. Unless you need the feature you're better to turn it off

TS3899 Email on iPhone is marked read even though I have not read it.

I have a 4s with iOS 8.1.1. Since the update my email will be marked read, even though I have not read it. At times, I can see the blue dot to the left of the emails go away as I open my folder. Any ideas?

Yes, I went to settings and turned wifi off. Thought at first I wasnt letting it set for a sec or two before shutting the iPad off. so now I wait like a minute or two before shutting the iPad down. didnt seem to help. Tried actually logging out of facebook when I was done with it, worked for about 4 days, and now it has started coming on and coming online again,, I went through my notifications and shut things off, Well see if it works. thank you.

My USB-Stick is marked busy even though not mounted (?)

Also Subject lines are too short.
Hello there, my name is Ayutac, I use Arch for some while now and I probably screwed up.
tl;dr: My USB-Stick is marked busy even though not mounted (?)
Previous History: I was trying to get the newest Arch iso on a stick of my friend, so I got the iso here and moved the stick's content to my extern hard drive. I used the opportunity to experiment how good "mv -t target_dir *" would work and interrupted it because I was stupid. Two folders somehow weren't movable through mv anymore, so I mv'ed everything else – now explicit – and moved the content of the two folders via pcmanfm. After that there were about 16kB on the stick left.
Next I copied the iso using
dd bs=4M if=/path/to/archlinux.iso of=/dev/sdc && sync
as suggested by the wiki. I looked at the stick; to my surprise the two folders I left there where still there, though filled with gibberish data. I thought I might give it a try, shut down, booted from stick. Black screen with a blinking text cursor for minutes. I concluded it didn't work and tried some other way. Following the wiki I was given the task to format the usb stick anew.
Thinking I knew what I was doing I used fdisk several times (including rebooting), getting myself two partitions with FAT32 (or so I think). But that somehow screwed it up.
The problem: After partioning and rebooting it seems I can't mount the partitions to copy the content of the iso. lsblk says
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931.5G 0 disk
├─sda1 8:1 0 21.7G 0 part
├─sda2 8:2 0 350M 0 part
├─sda3 8:3 0 95.4G 0 part
├─sda4 8:4 0 1K 0 part
├─sda5 8:5 0 95.4G 0 part /
├─sda6 8:6 0 7.6G 0 part [SWAP]
└─sda7 8:7 0 711.1G 0 part /home
sdb 8:16 0 465.8G 0 disk
└─sdb1 8:17 0 465.8G 0 part /run/media/nait/nanika
sdc 8:32 1 3.6G 0 disk
├─sdc1 8:33 1 650M 0 part
└─sdc2 8:34 1 3G 0 part
sr0 11:0 1 1024M 0 rom
(sdc is the stick) but I get
> sudo mount /dev/sdc1 /mnt/usb
mount: /dev/sdc1 is already mounted or /mnt/usb busy
> sudo umount /mnt/usb
umount: /mnt/usb: not mounted
Furthermore "lsof | grep sdc" returns nothing, neither does "cat /proc/mounts | grep sdc" or "cat /etc/mtab | grep sdc". The only clue is
> systemctl -a | grep sdc
dev-sdc.device loaded active plugged 1000 ARCH_201409
dev-sdc1.device loaded active plugged 1000 ARCH_201409
dev-sdc2.device loaded active plugged 1000 ARCH_201409
sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d3-3\x2d3:1.0-host9-target9:0:0-9:0:0:0-block-sdc-sdc1.device loaded active plugged 1000 ARCH_201409
sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d3-3\x2d3:1.0-host9-target9:0:0-9:0:0:0-block-sdc-sdc2.device loaded active plugged 1000 ARCH_201409
sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d3-3\x2d3:1.0-host9-target9:0:0-9:0:0:0-block-sdc.device loaded active plugged 1000 ARCH_201409
I tried to shut the devices down, but that didn't seem to work.
Furthermore the pcmanfm shows two mount points of the iso/stick but returns error message when clicking on them:
Error mounting /dev/sdc1 at /run/media/nait/ARCH_201409: Command-line `mount -t "iso9660" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=100,iocharset=utf8,mode=0400,dmode=0500" "/dev/sdc1" "/run/media/nait/ARCH_201409"' exited with non-zero exit status 32: mount: /dev/sdc1 is write-protected, mounting read-only
mount: /dev/sdc1 is already mounted or /run/media/nait/ARCH_201409 busy
Goal:
1. Make the stick usable again, with 2 partitions.
2. Copy the iso on the first partition.
3. Have a functioning Arch booting stick.

Welcome to Arch Linux.
A few questions and comments. First, are the files you copied from the disk safe? Since the plan was to wipe the disk anyway, I would suggest next time copying rather than moving files. I always get itchy when I move files. I have made some stupid mistakes where I copied hundreds of files to one output file, each one overwriting the previous. Of course, as it was a move, the source file was gone as well. Fortunately, I maintain backups. I would also suggest you look into the rsync facility when doing bulk copies.
That said, another excellent way to destroy data is the dd command (There are those who claim dd means just that) Are you certain that the usb disk had been been placed at the /dev/sda node? In the thread title, you made the assertion that the drive was not mounted. dd will run just fine even if the disk is mounted (I do not recommend this). What were you using to look at those folders that had become full of gibberish? Command line tools? A graphical file manager? (Nautilus, Thunar, Dolphin, SpaceFM) It is possible that the tool you were using was unaware that the contents had changed and was using cached information.
As to your goals. First, copying the iso to /dev/sdc tells the system to use the entire device for the iso, not the first partition. Our iso is not designed to be placed in a partition, I don't think you will meet with success trying to block copy the iso to a partition. If you want to try it, the destination would be /dev/sda1 (for partition 1) Make sure the partition is large enough. I would suggest that you use the entire disk by dd'ing the iso to the /dev/sdc (assuming it is c) node, but make certain that all of the partitions are dismounted. I know you think you did that, but I have my doubts. Please use command line tools. I don't trust GUIs that try to help too much.
If you want multiple partitions, use fdisk and re-partition the device. Then create a file system in each of those partitions.
It has been a while since I have tried to master a USB that will boot. I may have a faulty memory, or I may be using really old, outdated, information, but... I think that a USB has to boot as if it were a CD drive . I am not certain that a hard drive type structure with multiple partitions and a MBR will work on a USB drive (edit)and have it be bootable. In other words, goal 1 and goal 2 might not be achievable if goal 3 means that the disk will boot. I could be wrong.
Last edited by ewaller (2014-09-27 16:18:25)

HP Pre 3 shutting off while making a phone call, even after doctoring.

When I make a phone call and get the phone to my ear instantly (so sensor shuts off the screen) 1 in 8 phone calls my phone would just cut off and shut off. Then I have to hold the power button and switch the mute three times to bring it back to life.
If I make a phone call and let the phone stand in my hand for like 5 seconds before i bring it to my ear it will work just fine.
I also noticed that screen doesn't instantly turns on after I get it away from my ear, sometimes it dimms up really slowly. These occasions are rare but they are still there.
Finally I doctored it (mainly because Skype started to sign me out after 15-20 minutes while on WiFi) and problem is still there.
This problem occured first like few weeks after I got the phone (which is like four months ago) and its been there ever since.
Post relates to: Pre p100ueu (O2)

So, on a clean (full) restart, scheduled using Preset Reset, we have:
paulb@***:~/tmp/downloads$ grep shutdown /media/HP\ PRE3/downloads/messages
2012-02-23T11:35:05.250091Z [6336] webos-device user.notice root: /etc/rc6.d/S10orderly_shutdown: runlevel=6
2012-02-23T11:35:05.289428Z [6336] webos-device user.notice root: /etc/rc6.d/S10orderly_shutdown: com.palm.power service not running
2012-02-23T11:35:05.306549Z [6336] webos-device user.notice root: /etc/rc6.d/S25shutdown_animation starting
2012-02-23T11:35:05.313964Z [6336] webos-device user.notice root: /etc/rc6.d/S25shutdown_animation stopping LunaSysMgr
2012-02-23T11:35:05.578460Z [6337] webos-device user.notice root: /etc/rc6.d/S25shutdown_animation done stopping LunaSysMgr
2012-02-23T11:35:06.658935Z [6338] webos-device user.notice root: /etc/rc6.d/S25shutdown_animation done
and then:
2012-02-23T11:35:20.775726Z [21] webos-device kern.notice kernel: pmklogd started
2012-02-23T11:35:21.102905Z [21] webos-device kern.info kernel: [131075.591644] kjournald starting. Commit interval 5 seconds
2012-02-23T11:35:21.104248Z [21] webos-device kern.info kernel: [131076.428771] kjournald starting. Commit interval 5 seconds
2012-02-23T11:35:21.104705Z [21] webos-device kern.info kernel: [131081.554138] kjournald starting. Commit interval 5 seconds
2012-02-23T11:35:21.108825Z [21] webos-device kern.info kernel: [131091.071319] kjournald starting. Commit interval 5 seconds
2012-02-23T11:35:21.133178Z [21] webos-device kern.info kernel: [131092.381317] rockhopper: start re-registering driver
2012-02-23T11:35:21.177276Z [21] webos-device kern.warning kernel: [131093.789062] bootmark (starting): 28EE99C289D846B1E3448F297D7DD73B
2012-02-23T11:35:21.507415Z [22] webos-device kern.info kernel: [131094.121093] kjournald starting. Commit interval 5 seconds
2012-02-23T11:35:21.537445Z [22] webos-device kern.info kernel: [131094.147247] kjournald starting. Commit interval 5 seconds
2012-02-23T11:35:22.130584Z [22] webos-device daemon.warning upstart: (00022/753571891) tempdb main process (1171) terminated with status 2
2012-02-23T11:35:22.171844Z [22] webos-device user.notice root: org.webosinternals.ipkgservice upstart: script called
2012-02-23T11:35:23.017211Z [23] webos-device user.debug logctld: main: About to start main_loop
2012-02-23T11:35:27.189941Z [27] webos-device user.notice powerd: {powerd}: Powerd started on palm-rib.
2012-02-23T11:35:27.190948Z [27] webos-device user.info powerd: {powerd}: CHG_LOGIC: debug_battery_taper (charging, type=0, 1195.000000mAh, 100%, 32C, 0mA, 4177mV, (avg)0mA, min=40mA, max=4141mV, taper_state=start, battery_state=charge-termination, battery-authentic charger-connected)
2012-02-23T11:35:28.237121Z [28] webos-device user.notice mojodb-luna[1188]: [core.app] mojodb starting...
2012-02-23T11:35:28.868743Z [29] webos-device user.notice SmartKeyService: start: started service com.palm.smartKey
2012-02-23T11:35:28.869079Z [29] webos-device user.notice SmartKeyService: main: started service com.palm.smartKey
2012-02-23T11:35:30.355560Z [30] webos-device user.emerg hidd: HidInit: Touchpanel Reader Thread started
2012-02-23T11:35:31.636779Z [32] webos-device user.warning LunaSysService: SystemRestore::startupConsistencyCheck() started
2012-02-23T11:35:31.636871Z [32] webos-device user.warning LunaSysService: SystemRestore::startupConsistencyCheck() running - checking wallpaper and ringtone consistency
2012-02-23T11:35:31.642883Z [32] webos-device user.warning LunaSysService: SystemRestore::startupConsistencyCheck() running - restoring volume icon file
2012-02-23T11:35:31.651489Z [32] webos-device user.warning LunaSysService: SystemRestore::startupConsistencyCheck() finished
2012-02-23T11:35:33.674377Z [34] webos-device user.notice BrowserServer: startService: BrowserServer started on service bus
2012-02-23T11:35:36.214630Z [36] webos-device user.notice mojodb-luna[1188]: [core.app] mojodb started
2012-02-23T11:35:39.040100Z [39] webos-device daemon.warning upstart: (00039/663331410) dnsmasq main process (1454) killed by TERM signal
2012-02-23T11:35:39.071868Z [39] webos-device user.crit PmNetConfigManager: {netcfg.mgr}: startARequestCycle: dnsmasq not up
2012-02-23T11:35:39.091461Z [39] webos-device user.notice BrowserServer: IP address changed: 192.168.1.203. Restarting network
2012-02-23T11:35:39.116577Z [39] webos-device user.crit PmNetConfigManager: {netcfg.mgr}: startARequestCycle: dnsmasq not up
2012-02-23T11:35:39.160095Z [39] webos-device user.crit PmNetConfigManager: {netcfg.mgr}: startARequestCycle: dnsmasq not up
2012-02-23T11:35:40.907012Z [41] webos-device user.notice root: CustomizationService upstart: customization launch prereq not met
2012-02-23T11:35:48.570617Z [49] webos-device kern.warning kernel: [131120.936187] (&mm->mmap_sem){++++++}, at: [<80484e00>] kgsl_get_vma_from_start_addr+0x24/0x150
2012-02-23T11:35:48.578826Z [49] webos-device kern.warning kernel: [131121.024414] [<80484e00>] kgsl_get_vma_from_start_addr+0x24/0x150
2012-02-23T11:35:48.583770Z [49] webos-device kern.warning kernel: [131121.118682] [<806db774>] (down_read+0x48/0x5c) from [<80484e00>] (kgsl_get_vma_from_start_addr+0x24/0x150)
2012-02-23T11:35:48.584045Z [49] webos-device kern.warning kernel: [131121.128417] [<80484e00>] (kgsl_get_vma_from_start_addr+0x24/0x150) from [<8048615c>] (kgsl_ioctl+0x85c/0x15d0)
I'm not sure what all that means, or what the marks of a good, planned restart are, but it's a place to begin. Now all I have to do is wait for an unscheduled restart. Hmm, maybe I ought to trigger a luna restart, and see what that looks like in messages, as I don't know whether the unplanned stuff is a full or luna restart.

Rezound making a busy signal even when powered down

I have had my Rezound for about a month and have liked it; even traveled across the country with no connection problems. Then got home to the Texas hill country and it started acting up. We don't have very good signal here but even when in Kerrville where there is 3G this happens (but not San Angelo with 4G): my phone will be sitting there by its self and will start having a busy signal. I mess with the volume contol on the side that usually effects the ringer volume and it is now the in-call volume that does change the loudness of the busy signal. I can make a call out and it will temporarily stop the sound, but no one can call me while it is beeping. I went to the Verizon office, they did a factory reset, didn't fix it; they sent me a refurbished phone, trying to set it up today it did the same thing! Is there something going on with the tower that's causing this or the software? This is getting frustrating! Any help or input would really help.

Hi KvM,
I apologize for the delay but I am here to help! You advised that your device randomly has a busy signal. Please clarify, are you on a call when you hear this busy signal? Have you recently downloaded any new applications? I look forward to hearing from you soon.
Thank you for your contribution to our community forum,
AyaniB_VZW
Follow us on twitter @VZWSupport

My Itouch (3rd generation) is making a fuzzy sound even with volume muted, music and apps won't play/work, and turns off completly at random times... Help!

The same thing is happening to my sisters Itouch and we can't figure out whats wrong. Right now, I can't even get mine to turn on! Is it some kind of virus? Anyone know whats happening and how to fix it, please help! Thank you so much!

Oh, and I might have left it out in the sun (I don't know if that does anything) and it was acting funny before that but then got worse affter I left it out in the sun.

I'm using the @font face to embed fonts on my site. Everytime I use a heading tag Firefox adds extra emphasis (making a bold font even bolder). How can I resolve this? The heading tag renders fine in Chrome/Safari.

<pre><nowiki><?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<link rel="stylesheet" type="text/css" href="index/fonts/fonts.css"/>
</head>
<body>
<h1>Heading2</h1>
<p> Testing </p>
</body>
</html>
*/CSS/*
*/Fontface rule/*
@font-face {font-family: 'Gibson-Bold';src: url('159693_2.eot');src: url('159693_2.eot?#iefix') format('embedded-opentype'),url('159693_2.woff') format('woff'),url('159693_2.ttf') format('truetype'),url('159693_2.svg#wf') format('svg');
*/Testing use of Fontface/*
h1, h2, h3, h4, h5, h6 {
font-family: Gibson-Bold;
font-style: normal;
font-size: 10pt;</nowiki></pre>

You're welcome.
It is always a good idea to reload and bypass the cache after you have made changes and uploaded new files.
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

2.1 update making listening to podcasts even worse

Since updating to 2.1, it seems that the iPod will automatically play the next podcast in the list, which, given that it has always shown podcasts in reverse order, means that it will start to play an older (already listened to) podcast.
I had finally started to accept the fact that podcasts were displayed in the wrong order, but to have it automatically start playing older podcasts really annoys me, and makes no sense whatsoever.

I think continuous play should be the default, but there are other syncing issues, which have existed, which may have or may not have changed with iTunes 8, or 2.1.
I am currently using iTunes 8, iPhone 2.02 (which should be similar enough to iPod Touch for this discussion), and am still using habits from the past year of use. Like the earlier poster, I create smart playlists, putting podcasts in preferred order, and play them through. The Podcast Tab on the iPhone was retired earlier because of it being single play only (dangerous on the road) and the fact that I kept getting podcast I had already heard in that list.
Here are issues under that situation, past experience, which has moded my current behavior.
Placing phone in charging dock or speaker dock rather than attached to mac, the phone thinks it is syncing with iTunes, and resets playcount to zero, for podcasts that have already been played.
If you play the podcasts as a smart playlist, which does allow back to back podcast listening, apparently the playcount in the podcast tab on the phone is not necessarily affected.
Crossfade, which is sometimes accidentally rather than intentionally set, can allow play of one podcast before the playcount bit is flipped for the previous podcast.
You simply are not going to get proper syncing behavior if there are multiple locations for sync preferences, or if a particular behavior (Sync back to Mac) is constantly assumed, in conversation between the Pod or Phone, and iTunes.
I have not tested sync issues (a short podcast or two should work as test) since iTunes 8, and do not disagree that there should be a choice for Single Play or Continuous Play, or that Video Podcasts and Audio Podcasts should be segregated, but I prefer continuous play of multiple podcasts as default, and feel that not enough people use Playlists, smart or dumb, to get around the user interface issues assumed everytime a new method of presenting content is introduced.
That is, It seems stopping or skipping through the continuous play of a list of podcast would be less difficult than having to hunt and peck through a list to to choose the next podcast while driving or such, so I think there may be more cheers than jeers about the new system of playthrough; which may or may not affect syncing issues at all.

Trim marks positioning incorrect for files that have a larger crop box than trim box

I've seen this question in one other place on the forum, but it doesn't look like it ever got answered. It's been driving me nuts for months, so I'm going to try to do a very simple walkthrough for this problem to find out if this is a glitch in the software, or I'm doing something wrong.
When telling Acrobat XI Pro to print a PDF with "Trim Marks," the marks are applied to the "CropBox" instead of the "TrimBox." As far as I'm concerned, this is incorrect behavior. Acrobat 9 Pro, on the other hand, applies the Trim Marks to the TrimBox. Since I receive files with bleed and need to print out a sample on the printer on a regular basis, I have found it necessary to leave Acrobat 9 installed just to print these files. I've done a very simple walkthrough on how to generate a very simple mockup file from InDesign and output it to better illustrate the problem.
I've created a new InDesign document that is 5x7 inches with 1/8" bleed. To make it easier to spot the applicable boxes in the file, I've made a box with a 1/2 point stroke. I made a magenta stroked box that's 5x7 inches to signify the trim, and a cyan stroked box that's 5.25 x 7.25 inches to signify the bleed. I then output it to a high resolution PDF. For the purposes of this example to make sure this can be replicated easily, I'm using the built-in [PDF/X-4:2008] preset to start off with. The only adjustment I'm making to this preset is going to the "Marks and Bleeds" section to check the "Use Document Bleed Settings."
When opening the resulting PDF in Acrobat XI Pro, you can see that the various "Page Boxes" have been applied properly. "CropBox" is set to 0 to include all of the artwork in the file, "BleedBox" is set to 0 since there's nothing outside of the bleed area in this pdf, and "TrimBox" is set to 0.125 in since we gave this file 1/8" bleed. When going to print the file, you can go to "Advanced" and then "Marks and Bleeds" to enable printing with the "Trim Marks." Once you click ok, you can see in the preview image that the trim marks are lining up to the cyan box instead of the magenta box.
As an extra step, it's possible to confirm that the trim marks are going to the crop box and not the bleed box or trim box. If you add a slug to your InDesign document and reoutput the pdf (being sure to include the slug area in the "Marks and Bleeds" section), you will find that the Trim Marks are even further outside of the cyan box. If you output your PDF from InDesign with Trim Marks already applied, you can turn on the Trim Marks option when going to print in Acrobat to see that Acrobat's Trim Marks are going outside of the crop box as well instead of overlapping the ones generated by InDesign.
Is there any fix for this behavior aside from opening the files in Acrobat 9 and printing from there instead?

yes, in the pure definition of the word in the world of print, Crop DOES equal trim...in the exact concept of what YOU see it as.
in Adobe's little bubble, they decided to call the outer box the "Crop" so that they could differentiate between trim and crop in the page box model.
These pictures should help, if not, I'm not going to continue to explain something that you don't want to grasp.
Each picture shows what Acrobat is calling each page box line. since they felt the need to call one trim and one crop, you have to widen your concept of what Adobe is defining "crop" as. Not saying its right, but it is what they are doing, and what is causing the whole issue.
All that aside, if you are not understanding the page box model, then your PDFs are probably not set up this way, so you probably wouldn't even notice the change... So why are you posting on this thread?

Marker spacing (bug?)

I have a program that periodically gets updated with different z scale intensity graph max and min values (which are used to establish the range of a color table) . I want the user to have the option of specifying the number of marker intervals but I seem to have run into a bit of a bug. As it turns out, "uniform marker spacing" is not in fact uniform if the scale goes into the negative range. It seems that the scale must always increment with respect to the 0 marker regardless of where i specify the start range property to be.
Case in point, look at the VI I've attached. I have a scale from - 100 to 100, and I try to divide it into 5 even intervals. Ideally, the scale markers would just read 100, 60, 20, -20, 60, 100. Instead, because it chooses to always use 0 as the increment reference, it reads 100 80, 40, 0, 40, 80, -100. Does anyone know of a way around this?
Solved!
Go to Solution.
Attachments:
marker interval bug.vi ‏15 KB

I haven't tested the following theory:
A scale has 5 properties: Min, Max, Major Increment, Minor Increment, Start.
I think that the Start will allways be at a marker value, so I think that changing the Start to 'Min' will get you where you want.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Not able to get rid of a Question mark in the Dock

A friend got stuck with a Question Mark in the Dock of his 4 year old iMac that was linked to an app not compatible anymore with his latest 10.8.2 version ( guess it was a Power PC app, before Mountain Lion, he was still on Leopard ). He apparently deleted the app and some dependencies manually ( instead of using App Cleaner & Co. ) and now whenever he is hovering over that Question Mark, even before being even able to pull it out from the Dock, the screen flashes up white and the Finder resets.
Is there a way to access the Dock through an element of his user library to get rid of that Mark, or even through a Terminal command ( not that I like to delve in there, but Terminal commands have helped me personally quite often ) ?
Does the Dock have a dedicated place in the Library's User Folder ? Couldn't find anything on my own Mac.
Thanks for any clue ....

Right clicking on it is not even an option, just hovering over it seems to induce a "nuclear" reset of the whole desktop and graphic card on the iMac.
Have meanwhile found a possible solution by erasing the dock preference file in the user/library/preferences folder to reset the dock to it's default state. Will try this out through a Skype conversation with that Buddy.
Was seen here :
https://discussions.apple.com/message/16447109#16447109
Thank you for stepping in. Good to know that people are still willing to help in this community.
Greetz to the UK from France

Oracle Translation Builder: Japanese characters in question mark (????)

Hi All,
We need to translate a custom from labels from English to Japanese, so that both US and Japan can use that form.
So we have used Oracle Translation Builder to specify the translation. As an initial step, we just changed the labels to some other english words. And now we have generated American .fmx and Japanese .fmx. And we are able to see the difference.
Now in Oracle translation Builder(OTB), if i paste Japanese characters in the translation editor, we are able to see the Japanese characters. But if we save&close the OTB and re-open it, we see all the question(???) marks. Even if we generate/upload the Japanese.fmx to applications, we are seeing the same Japanese ??? marks in the applications.
Can you please let me know, what am i missing...
(I have installed the Asian language (ARIALUNI.ttf) in my local system.)

May be You should set the environment variable NLS_LANG to "JAPANESE_JAPAN.WE8MSWIN1252" or "AMERICAN_AMERICA.JA16SJIS" will allow you to store Japanese providing the input data is truly JA16SJIS and if the database is also in a character set that can store Japanese like UTF8 or JA16SJIS).
Or use Oracle Translation Hub it is useful tool. It replaces the OTB :-)
Edited by: user9212008 on 2.4.2010 1:09

Set Marker Color Bug

I was relieved after much digging to find you can make a keyboard shortcut to make a marker of a specific color with just one click. As opposed to making a marker and then going back to it to change its color.
However for some reason when using this while playing a clip, this only works in a timeline, or on a video clip. When I use the same command on an audio only file, i.e. music cue. It just creates a marker of the default color 1. - This is only when playing the clip. If you park the playhead it works as expected no mater what the clip is.
I'm frustrated, because the main reason I needed this feature was to tap out the beats in music for easier editing while I listen to the music cue (in real time). I like to use color 1 for each beat in the 4-4 measure, and on the fourth measure tap out a new color so i can see where it repeats.. that way I can easily cut from color 2 to color 2 almost anywhere in the song seamlessly. Sometimes I choose a third color when the melody loops so I know I can smoothly truncate a song with little to no effort.
I noticed after the fact I can jump back to the marker and change it's color with the tool.. it just won't do it on an audio file while it's playing.
Is this just a bug? Just a bug on my system? Is it an intentional workflow on Adobe's part for some reason? Anyone else having this problem?
To map it open up keyboard shortcuts and sift for "set marker color"

Yes, I know it. But if I set attribute values on my page, everything is right. If I set it from code, there is an error.
I think that it is a bug, because component, for which I set attribute, has client id like: UIDataId:rowIndex:componentId. I set value to component on the third row, and have this value on components on the third and the fifth row.
To tell the truth, I am sure, that it is a bug. If it is not so, please tell me, how an I set attribute value to component, which I need. Is there any way? I think, no. And it is a bug.

Trim Marks - feature lost in CS4

Going back many versions in Illustrator, we had only Crop Marks. Then (thankfully) we got Trim Marks which allowed multiple sets of marks on the same page, all selectable. The command moved around from one menu to another, but not in CS4 it's just gone completely. The Crop Marks we have now in CS4 only allow one per page, and they are not selectable, and, if you happen to make a guide out of the bounding box you used to create the Crop Marks, the crop marks vanish.
Simple layouts for a defined area have always worked well on a single letter size layout by drawing the bounding boxes, let's say for a business card and an envelope and a shipping label, making trim marks (or the Filter->Crop Marks) and then converting the three bounding boxes to Guides.
Can't do that no more. Why? Why oh why would Adobe take away a feature that has worked so well for so many years. And don't tell me about multiple artboards. I get how they could be used, but that is no excuse for eliminating the feature.

Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4617
Win: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4618

CP2025 MAKING REPETITIVE MARKS AT EVEN INTERVALS

Similar Messages

Maybe you are looking for