CP2025 printer - stripes across page

Hi, I have a HP Laserjet CP2025 printer that I've used for 1 year. I'm connecting via network and am running XP.
Every once in a while, my pages will print out with black, yellow, cyan, magenta stripes that run horizontally across the page. This happens to a few other computers that are running XP, 7, OS X.
This has happened with more frequency within the past 2 months to 3 computers on the same network.
We had a tech come out to look at the printer and he couldn't find anything wrong with the printer or the inks. The inks are not HP brand but are compatible. We've been ordering their inks for 1 year for this printer and longer for the previous printer we had without any problems. The tech suggested that the problem lay in our printer drivers.
However, the newest computer running Windows 7 (is not older than 3 months old) is running into the same problem. This computer is connected directly via USB.
Thank you!

This pattern sounds like the bias that moves toner across from the cartridge to the belt is shorting out. It may be your cartridges, but several others have reported a failure of one of the drive motors. This is not a home repair if this is your problem. If you have no warranty, I have seen propmorions on the DN model that net out less than $300, and you get 4 new cartridges.

Similar Messages

HP Color LaserJet CP2025 Printer - Vertical Yellow Band printing on every page

For the last several weeks whenever I print from my HP Color LaserJet CP2025 Printer the pages print with a vertical yellow band on the right hand side of each page. I checked the supplies status and it says each ink cartridge has plenty of ink left so I'm at a loss as to what could be causing this yellow band. I'm wondering if it has something to do with the printer's hardware (inside roller perhaps)?
Any insight would be most appreciated.

Hi there cdyson44, Welcome to the Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital Imaging/ct-p/bsc-412
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Toolbar installed that has caused a blank strip across the top of my facebook page which i cannot click on

I accidentally installed a toolbar i do not want. i think i successfully uninstalled it, but after it was installed, when i go into the facebook app, there is a strip across the top of the facebook page on which i cannot click on to . this strip includes my spot on which i click on to my wall or homepage in facebook. if i move the page down far enough, i can click on other things, but never can i get far enough down to click on these tabs. this only happens in firefox, which i prefer wayyy over google chrome for gaming. do i need to delete firefox and reinstall? please help!

Recently, the Yahoo Toolbar and the Babylon extension have been reported to cause that problem. They seem to overlap invisibly over the top of the web page display. If you have either or both, uninstall or disable them/it, or see if an update is available that solves the problem.
*See --> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*See --> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
*See --> http://kb.mozillazine.org/Uninstalling_toolbars
If that does not solve the problem:
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
*See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*'''''Adobe Shockwave for Director Netscape plug-in''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

When I try to print a web page, all I get is one line across top of page.

When I try to print a web page in Firefox, the only thing that prints is a single line across the very top of the page. I can sometimes highlight and print my selection, but now that has stopped working.

I did not have the HP printer software for Mac OSX installed properly. Once installed the problem went away.

How do you split the print job across multiple printers to shorten the prin

i
Can any one you provide some information on below questions.
Check printing by XML template (XML Publisher).
1. When printing checks, how do you print the checks from one printer tray and the overflow remittance pages from another printer tray?
2. When printing a large batch of checks using XML and PDF output, how do you split the print job across multiple printers to shorten the print time?
I appreciate if you could give some information on above 2 questions.
Regards,
Ramarao.

Probably sould just do them individually.
How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
About Free Apple Apps for iOS 7 compatible devices
http://support.apple.com/kb/HT5913
 Cheers, Tom

Officejet Pro 8600 Plus prints part of page and quits

My brahd-new Officejet Pro 8600 Plus prints part of page and quits. The manual said to clean the print heads and align the printer. I did both of those. It made the problem worse. I'm printing on photo paper - HP Premium Plus. It happens about 1/2 the time.

Hi beantowner2,
I would like to begin with a few questions,
Does this happen when you copy a photo, or only when you print form the computer?
Do you have the printer connected directly to a wall outlet or a surge protector?
What operating system and version is on the computer?
Is the printer connected to the computer with a USB cable or wirelessly?
If you have a WIndows operating system please download and install the latest firmware version for the printer. HP Officejet Pro 8600 N911g_n Firmware.
If you are using a surge protector, I suggest disconnecting and connecting the power directly to a wall outlet.
Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see,
ISSUE:
Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
This is not limited to Laserjet printers.
I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Tutorial on how to print multiple output pages

Hi,
I am rather sad that this forum does not provide a simple principle on how to printout multiple pages to newbie.
Below is a short contribution from me on how to print across multiple pages, other reader are also encourage to modify the code to provide more robust tutorial .
* How to use java to print across pages that are more than one
* Short contribution to java forum by Eric gan (Malaysia)
import java.awt.*;
import java.awt.geom.*;
import java.awt.print.*;
import java.awt.Graphics2D;
import java.awt.print.*;
import java.awt.print.Book;
import java.awt.print.Pageable;
import java.awt.Graphics2D;
import java.awt.Graphics;
public class Example implements Printable {
//--- Private instances declarations
private int row_cnt=30; // set the total number of row per page
private int cum_row_cnt=30; // set the counter to record total number of row per page to determine
// whether maximum pages should be increase depending on the programme requirement
private int max_pg=0; // set the maximum number of page
public Example () {
//--- Create a printerJob object
PrinterJob printJob = PrinterJob.getPrinterJob ();
     printJob.setPrintable(Example.this);
if (printJob.printDialog()) {
try {
printJob.print();
} catch (Exception PrintException) {
PrintException.printStackTrace();
public void paint (Graphics g) {
Graphics2D g2d;
g2d = (Graphics2D) g;
int x=10;
int y=10;
for (int outline=0;outline<=160;outline+=20){
          if (y>cum_row_cnt){
          cum_row_cnt+=row_cnt;//counter should grow by value equal to row_cnt
     max_pg++;
     g2d.drawString("outline value ---> " +outline , x, y);
     y+=10; // to set the row printing interval
} // end of paint procedure
     public int print(Graphics g,
PageFormat pf, int pi)
          throws PrinterException {
// normal routine to check when should java stop the print looping
if (pi >max_pg) {
return Printable.NO_SUCH_PAGE;
Graphics2D g2 = (Graphics2D) g;
     int fontHeight=g2.getFontMetrics().getHeight();
     int fontDesent=g2.getFontMetrics().getDescent();
     double pageHeight = pf.getImageableHeight()-fontHeight;
     double pageWidth = pf.getImageableWidth();
     // setting for the translate and graphics clipping to enable printing on output pages
// row_cnt can be equal to pageHeight
// in this examples assumming pageHeight=20 rows
     g2.translate(pf.getImageableX(), pf.getImageableY());
g2.translate(0f,-pi*row_cnt);
g2.setClip(0, (int)(row_cnt* pi),
(int) Math.ceil(pageWidth),
(int) Math.ceil(row_cnt));
paint(g2);
return Printable.PAGE_EXISTS;
public static void main (String [] args) {
Example example = new Example ();
System.exit (0);
Thank

Hello
I know that Pages is using its own algorithm to resize pages when it put several of them on a single sheet.
This is why I use this tip.
I draw a rectangle whose size is supposed to be the final one.
I give it a white background and a black border whose thickness is set to one point.
For the tests I just insert three page breaks so that the document is a four pages one.
I print it as is.
Doing that, I may measure the printed rectangle.
Of course, at first attempt it doesn't match the required size.
It's easy to compute the required adjustments.
When the correct factor is reached, it is easy to build the complete document so that it prints the correct size.
Doing that I never got odd results but maybe it's because I am a lucky guy.
Of course, disagreeing with one advice doesn't mean that I don't respect it.
I respect your opinion, _on other matters too_
Yvan KOENIG (from FRANCE mardi 6 mai 2008 17:24:09)

Can we Restrict Rows or Stop rows from breaking across pages in XSL-FO

Hi,
Iam working on PO Print report and my requirement is to Stop rows from breaking across pages.
Suppose there are three Lines in a PO.Then the information of the Third line of PO comes partly on page1 and the rest on Page 2.I need all the line information in a single page and not break across pages.Can i control the rows from breaking across pages....If not then can i limit the Rows?
Any Help would be appreciated....Thanks

Hi vetsrini,
not very sure where to add the code.I have tried but its not working...i have sent u the xsl file on [email protected]
Please let me know where i should add the code.
Thanks in advance

Subforms across page breaks

In LiveCycle, how do you keep subforms from being split across page breaks? I'm working an a form in which several subforms can be added or deleted. If I add enough of any of them, when they get to the bottom of the page, instead of getting a new page the subform splits between the pages.
Here's a basic hierarchy of the form (excluding master pages, content areas etc.)
MainForm
     PageA
          SubformA
          SubformB
          SubformC
     PageB
          SubformA
          SubformB
          SubformC
     PageC
          SubformA
          SubformB
          SubformC
The subforms that can be added/deleted are SubformA, SubformB, SubformC on each page.
The idea is to have PageA, PageB and PageC always start at the top of the page, and when enough of any of the Subforms are added, the Subform which would be split at the bottom of the page goes to the top of the new next page.   So if I add enough of PageA, SubformA to overflow the page, the last instance of PageA, SubformC goes to the top of a new page, and PageB goes to the top of the following page.

Never mind everybody, I figured out what I did wrong.
The size of the content area on the master page must be the size of the form minus the space allowed for page headings.
For example, let’s say that you have a form which is 8” wide by 11” long. On your master page, there is a 1.5” heading which will print on each page across the top of the page.    The content area should be 8” wide by 9.5” long.
I made the mistake of having the content area 8” wide and 11” long, thinking it should be the same as the form size and that the heading on the master page was included in that 11 -inch-length.   Wrong.
When I pressed an add button to add a subform enough times so that the subform would overflow the page, instead of appearing on the top of the next page like I anticipated, the subform appeared to hide underneath the page break and the header of the next page. That's because the content area wasn't filled yet. It still had another 1.5" to go. I had to press the add button twice to get a subform to appear on the next page. In the meantime, the new subforms continued to appear to slide under and hide underneath the page break and next page header.

How do I stop it printing 1/6 (bottom RH corner) of page 6 times instead of printing the whole page?

When I print a PDF downloaded from the internet it chops the bottom RH corner of the page and reproduces it 6x (2x across the page and 3x down the page), instead of printing the whole page, this is driving me mad, does anyone know how to stop it? I have ticked Print as Image and Multiple Pages is NOT selected....

suzbat,
I have ticked Print as Image and Multiple Pages is NOT selected....
Are you using the desktop version of Adobe Reader on a Mac computer? What is the version of your Adobe Reader?
You posted the question on the Adobe Reader for iOS forum. But Adobe Reader for iOS does not offer the print options like "Print as Image", "Multiple Pages".

Print postcards from 'Pages' with a Lexmark C544dn printer?

I have been trying, unsuccessfully, to print postcards from 'Pages' with a Lexmark C544dn printer. As far as I can say, I have correctly set all parameters, but the output is always blank. Any ideas? FYI Lexmark have been unable to help!!

GeoffBob wrote:
Hi Jerry, and thanks for your response.
What I want to achieve is a landscape postcard with one line of text across the top. I use this to stick on a few sticky notes for training workshop participants to use, to record their special interests for the session. I have done this for years with a Windows PC, MS Word and an HP4500dn LaserJet, and assumed that it would be a simple process with the new set-up (iMac, OS-X 10.7.4, iWork Pages 4.1 and Lexmark C544dn).
I started a blank document, with the paper size set to 6 x 4 inches landscape format. I re-set the margins to suit the size of the postcard, so that the text appeared to be in the right position, on screen.
I used the MP tray to feed the paper (there is only this one input, apart from the regular paper tray), and have tried this at the left side, in the centre and at the right side, in both landscape and portrait format.
I have even tried putting a sheet of portrait A4 paper through, and the printing shows up two thirds towards the bottom of the sheet, across the narrow dimension of the sheet. This makes me think that the machine is 'printing' after the paper has passed through.
Any idea what I am missing? Thanks, Geoff
Your trial with a full size paper tells the story, I think. Your ink is missing the post card. Try again with a small card. After initiating the Print function, make sure you are seeing the expanded Print dialog with the preview on the left side of the dialog window. Does everything look OK there? Paper correct size and orientation? Text showing where it should in the preview?
Jerry

HP 6310 started printing 2nd blank page

Hello,
After a year or two of use, my printer ALWAYS prints a second blank page after the document is printed. Paper jams are also getting more common. Is there a "fix" or is there somewhere I can get a repair done if needed.
Thanks,
Tom Allen

Hello there @sirknite ,
I read your post about your printing out blank pages from your Windows 8 system however, this issue does not occur on another PC. In the details you have mentioned, it seems to be an issue with the software on your Windows 8 system, as the other computer does not have a problem. To test this theory, try printing from another program to see if blank pages will still print out. This way, we will know if the problem is originating in one specific program, or in the printer driver.
Skipping ahead a little bit, try running the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
Try printing again, and if any blank pages still print out, try Uninstalling the Printer Software, restarting the computer completely, and download and reinstall the printer here: HP Photosmart Full Feature Software and Drivers
Please write me back with your findings and all of the results from your troubleshooting. Include which programs you have tested out and any other helpful information you may have came across.
Happy New Year!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How can i print just one page of photo book without printing the entire book

how can i print just one page of photo book without printing the entire book

Jim,
Take heart. We can help.
First turn on page view so you can see how the content of your sheet fits on the page(s). A Numbers document contains sheets (listed on the left) which in turn contain tables, charts, text, and graphics. Select the sheet you want to print on the left, then enable page view by selecting the menu item:
"View > Show Print View":
Now you should see your content and how it fits on one, or more, pages. If thie content is too big for one page use the controls and the bottom left of the window to expose the sheet controls:
Here a table is too big to fit on one page:
slide the "Content Scale" slider so the content fits:

How do I print just 1 web page in FF 29 ? With 29 you can only change the first field ( 1 of 5, 2 of 5, 3 of 5, etc. ) That means I can only print all 5 pages,

So I cant seem to print just the 1st of 5 pages. The default setting , 1 of 5, will print all 5 pages. The 2nd field can not be altered, as it could in previous FF versions, to 1 of 1. Therefore, I can only print all 5 pages, 2 through 5, 3 through 5, etc. WTF - I keep wasting print paper. I got the print edit add-on but that doesn't seem to help. I have been through several FF versions and do not like the format of 29.

Actually, with the [https://addons.mozilla.org/en-US/firefox/addon/print-edit/ Print Edit addon], if I click the down arrow I get the old print format options and can do it.

I am new to Numbers and can not figure out how to only print a section of my rather large spreadsheet. How do I only print a specific page?

How do you print only a page or section of a spreadsheet in Numbers?

Hi Kirsten,
Copy the section you want to print, Insert a new Sheet into your document, Paste the copied contents into the Table that comes with that sheet. Print that sheet.
If this will be a regular need, you might consider building a breakout table to contain the data you'll print. A search for "breakout" should bring up some examples (or check some of the "More Like This" linke to the right.
Numbers doesn't support a means of printing a selected section of a document, probably because the design model is of a document containing many small specific purpose tables, rather than the single monolithic table that is the model in other spreadsheet applications.
Regards,
Barry

CP2025 printer - stripes across page

Similar Messages

Maybe you are looking for