CP2102 Serial to USB converters stopped working

Before updating yesterday, my CP2102 Serial to USB converters would work out of the box and show up as /dev/ttyUSB0 and /dev/ttyUSB1 when plugged into my USB port
Now they don't show up at all.
lsusb:
Bus 002 Device 006: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
dmesg:
[86552.644525] usb 2-1.4: new full-speed USB device number 6 using ehci-pci
lsmod:
ctr 12927 1
ccm 17534 1
arc4 12536 2
rtl8192cu 66273 0
rtl_usb 17592 1 rtl8192cu
rtl8192c_common 44268 1 rtl8192cu
rtlwifi 67295 3 rtl_usb,rtl8192c_common,rtl8192cu
coretemp 12820 0
hwmon 12930 1 coretemp
intel_rapl 17605 0
mac80211 648753 3 rtl_usb,rtlwifi,rtl8192cu
iosf_mbi 12682 1 intel_rapl
x86_pkg_temp_thermal 12951 0
intel_powerclamp 17122 0
mousedev 17272 0
joydev 17063 0
cfg80211 476584 2 mac80211,rtlwifi
rfkill 18867 2 cfg80211
kvm 435299 0
crct10dif_pclmul 13394 0
crc32_pclmul 12915 0
crc32c_intel 21809 0
ghash_clmulni_intel 12978 0
aesni_intel 167997 2
nvidia 10512002 182
aes_x86_64 16719 1 aesni_intel
lrw 12757 1 aesni_intel
gf128mul 12970 1 lrw
iTCO_wdt 12831 0
glue_helper 12649 1 aesni_intel
ablk_helper 12572 1 aesni_intel
serio_raw 12849 0
snd_hda_codec_realtek 67322 1
i2c_i801 16965 0
iTCO_vendor_support 12649 1 iTCO_wdt
drm 273125 3 nvidia
ie31200_edac 12567 0
r8169 76869 0
edac_core 47176 1 ie31200_edac
cryptd 18553 3 ghash_clmulni_intel,aesni_intel,ablk_helper
psmouse 107442 0
i2c_core 50240 3 drm,i2c_i801,nvidia
evdev 21544 7
mac_hid 12633 0
pcspkr 12595 0
mii 12675 1 r8169
snd_hda_codec_hdmi 49263 4
snd_hda_codec_generic 63087 1 snd_hda_codec_realtek
mei_me 17987 0
video 22205 0
mei 75468 1 mei_me
battery 17452 0
thermal 17559 0
shpchp 35210 0
snd_hda_intel 26387 7
snd_hda_controller 26857 1 snd_hda_intel
snd_hda_codec 112621 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 17244 1 snd_hda_codec
snd_pcm 88779 5 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 26614 1 snd_pcm
snd 73436 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
soundcore 13031 2 snd,snd_hda_codec
lpc_ich 20768 0
button 12953 0
processor 27777 0
fan 12726 0
sch_fq_codel 17343 6
pci_stub 12429 1
vboxpci 23139 0
vboxnetflt 27412 0
vboxnetadp 25443 0
vboxdrv 352683 3 vboxnetadp,vboxnetflt,vboxpci
ext4 514390 1
crc16 12343 1 ext4
mbcache 17171 1 ext4
jbd2 86379 1 ext4
hid_generic 12393 0
usbhid 48596 0
hid 110513 2 hid_generic,usbhid
sd_mod 43575 3
sr_mod 21903 0
cdrom 47479 1 sr_mod
ata_generic 12490 0
pata_acpi 12771 0
atkbd 22254 0
libps2 12739 2 atkbd,psmouse
ata_piix 33592 2
libata 181461 3 pata_acpi,ata_generic,ata_piix
ehci_pci 12512 0
ehci_hcd 69979 1 ehci_pci
scsi_mod 147395 3 libata,sd_mod,sr_mod
usbcore 199382 5 rtl_usb,ehci_hcd,ehci_pci,usbhid,rtl8192cu
usb_common 12561 1 usbcore
i8042 18002 1 libps2
serio 18282 6 serio_raw,atkbd,i8042,psmouse
Would appreciate any help in fixing this. Thanks

What was updated yesterday? Was the kernel updated? If so, did you reboot?

Similar Messages

Brand new Macbook pro one USB port stopped working

Brand new Macbook Pro 15 with Retina display. One of the USB ports stopped working after 24hours.

Serial Port Configuration and Port definition is reset by
NVRAM http://support.apple.com/kb/ht1379
If no good I would return the machine ASAP:
Genius reservation http://www.apple.com/retail/geniusbar/
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

HP Pavilion dv6 All 4 USB ports stopped working

Hello,
I recently bought a Pavilion dv6-6c11sa laptop. Windows 7 Home Premium 64-bit
Everything was working fine for about a week, and then yesterday all of the USB ports stopped working. I have 4 USB ports in total, two 2.0 and two 3.0. No matter what peripheral device I plug in, mouse or flash drive etc, they're not recognized by the laptop. The lights don't even light up on the devices, regardless of the port. I've tried uninstalling and reinstalling the drivers in device manager, taking out the battery and rebooting, installing the chipset drivers (AMD), nothing works. No programs had been installed 3 days prior to the occurence, although I had rebooted several times in that time frame. I simply booted up the laptop yesterday, and nothing worked.
Could anyone offer a solution or suggestion, please?

Hello,
I recently bought a Pavilion dv6-6c11sa laptop. Windows 7 Home Premium 64-bit
Everything was working fine for about a week, and then yesterday all of the USB ports stopped working. I have 4 USB ports in total, two 2.0 and two 3.0. No matter what peripheral device I plug in, mouse or flash drive etc, they're not recognized by the laptop. The lights don't even light up on the devices, regardless of the port. I've tried uninstalling and reinstalling the drivers in device manager, taking out the battery and rebooting, installing the chipset drivers (AMD), nothing works. No programs had been installed 3 days prior to the occurence, although I had rebooted several times in that time frame. I simply booted up the laptop yesterday, and nothing worked.

USB Ethernet stop working after 10.7.5 update

After updated to 10.7.5, my usb ethernet stop working, and always shows it doesn't connect.
Reinstall 10.7.5 make no difference.
How do I solve it?
Thanks!
Yu-Hsuan

Or download it directly from ASIX Electronics instead of driversworld.us.
Product family: USB 2.0 to fast Ethernet
Product name: AX88772
URL: http://www.asix.com.tw/download.php?sub=downloadsearch&PSNoID=101
I installed it and my AppleUSBEthernet started to work.
The error i had (sudo dmesg):
AppleUSBEthernet::monitorLinkStatus - Link down, Device b470200
0 0 AppleUSBEthernet: monitorLinkStatus - Link partner register is bad, re-trying...
0 0 AppleUSBEthernet: monitorLinkStatus - Link partner register is bad, trying to reset...

A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port. WHen we plugged it into the port on the keyboard, the device works. Why?

A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port. When we plugged it into the port on the keyboard, the device works. Why? Obviously the device is operational. Could the USB port have burned out from having too much power drawn? If so, is it reparable?

It can't draw "too much" power, it can only draw as much as the USB port is able to provide and no more. IIRC, the keyboard port has a lower power output than the iMac's port.
That being said, yea, it's possible that the port has failed and it can be replaced or if another port works you can use that one. Although if it is still under warranty or covered by Apple Care, then I would take it to an Apple Store or service provider to get the port repaired.

USB Video stopped working with 3.1.8 update

I have been using iChat video with my USB camera for a while with the help of iChatUSBCam. The new update of iChat (3.1.8) included support for USB cameras and once installed my USB camera stopped working with iChat. It just reports the camera is in use by another application. I've been browsing for answers for a while and have tried many things:
- Restart in various combinations of unplugging and plugging in the camera
- Reinstalled the Macam driver
- Reinstalled Quicktime
- Uninstalled iChatUSBCam (since iChat is supposed to work without it now - I think...)
- Reinstalled iChatUSBCam (v 2.2.1 - current)
It's a Logitech Quickcam for Notebooks Deluxe. It continues to work fine with Skype and the the Macam camera tool. I'm using Skype for now (on tour for 6 weeks and use it to video call home) but the quality is crap compared to what iChat used to do.
Thanks for any help you can give.
Stranded in the UK with no decent video chat
Matthew
Powerbook 12" 1GHz - 1.25G RAM Mac OS X (10.4.9) Logitech Quickcam for Notebooks Deluxe

Some people have reported that Updating iChatUSBCam
and deleting the Macam drivers and then the
com.apple.ichat.plist is the way to go.
Thanks for your help!! I tried these things before, but tried them again in the order you suggested with no success. I'm pretty sure it is not a UVC compliant camera. It's not on Logitech's list of UVC cameras.
M/N: V-UBG35
P/N: 861228-0000
PID: CE6420A
If I try it without the Macam drivers it doesn't show up as a camera is connected at all.
It's so frustrating because it was working great with iChatUSBCam until the recent update. It still works in Skype with no problems, but I'd rather be using iChat if I can - much better video quality.
Thanks for any suggestions!
Matthew

My USB webcam stopped working after I upgraded to OS X 10.6.8

When I installed the upgrade to OS X 10.6.8 my USB webcam stopped working.
Any idea how to get it back.

Upgraded from what to 10.6.8?
Did it work before?
What camera?

1 of 2 USB ports stopped working after 10.7.2 upgrade

I have the newest Macbook Pro. I upgraded to 10.7.2 today and immediately after, 1 of my 2 usb ports stopped working.   Thought it may be the cable, so I switched cables. Tried plugging in my iPhone, my portable drive and nothing.   Both work on the other port though.   Both ports worked fine before the update.
I've rebooted 4x.
Suggestions?

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best.

One usb port stopped working today

One of my USB ports stopped working today. I think it may be related to Itunes update today. Has anyone else seen this recently? I restarted my computer - but that didn't help. I have a MacBook Pro - running Lion 10.7.5
Any suggestions? I saw one USB Hub when I went to Apple --> About this Mac, but couldn't tell if both were there.

http://www.ehow.com/how_7351075_reset-usb-ports-mac-laptops.html

HT1379 MacBook Pro USB port stopped working

USB port stopped working....
How can I diagnose my USB port to test for hardware or software problem

Try Resetting the System Management Controller (SMC)

USB ports stopped working in my Macbook Pro

USB ports stopped working in my Macbook Pro

I do not know anything about audio consoles nor do I have an iPhone.
My iPod also does not show on the desktop but it is recognized in iTunes, Check if that is the case for your MBP.
Do you have the appropriate boxes checked in Finder Preferences?
See if this support article is of any assistance:
http://support.apple.com/kb/TS1410
If you have an external HDD, connect it to your MBP and see if it is recognized. If it does not show on the desktop, check Disk Utility.
Have you tried all USB ports? It could be that the problem lies in your MBP.
Ciao.

USB ethernet stopped working on 10.7.4.

After I upgraded to 10.7.4, the usb ethernet stopped working. When I plugin the usb ethernet port, it still shows "Cable Unplugged". Any suggestions? Thanks.

FIxed my problem!
After years the problem was solved somply!
Go to System preferences
Go to Ethernet
Go to Advance
Go to Hardware
The just make the changes like in the pictures below

My USB ports stopped working. So did my dvd drive. I have a Pavillion Laptop. Model 1245dx.

My USB ports stopped working. Do did my DVD drive. I did do a Windows update yesterday. Any ideas out there? I can't use my mouse or printer. Help!

Try a windows system restore, pick a date before the windows updates were installed.

I have a Pavillion dvd Model 1245dx. USB ports stopped working. How can I fix this?

My USB ports stopped working. So did my DVD drive. Any ideas how to fix this?

Back up all data before proceeding.
Step 1
From the menu bar, select
           ▹ System Preferences... ▹ Date & Time ▹ Time Zone
Check the box marked
          Set time zone automatically using current location
if it's not already checked. If the box is checked, uncheck it and then check it again. Test.
If the correct location and time zone aren't shown in the preference pane, then either Wi-Fi is turned off, or you're not within range of a network in the Location Services database. Under those conditions, the computer can't determine your location.
Credit for this idea to ASC member Easyas314.
Step 2
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.Maps
Right-click or control-click the line and select
         Services ▹ Reveal in Finder
from the contextual menu.* A Finder window should open with a folder named "com.apple.Maps" selected. Quit the application if it's running. Move the folder to the Desktop, leaving the window open. Relaunch the application and test. If there's no change, quit again and put the item you moved back where it was, overwriting the one that may have been created in its place. Otherwise, delete the folder you moved. The list of recent places displayed in Maps will be lost.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Satellite P850 - right hand USB ports stopped working

I have a new Satellite P850, after a short period the two right hand usb ports stopped working, I only had a wireless mouse plugged into them at the time. Is there a reset for these ports, I have tried uninstalling and reinstalling, no change.
Any one have any thoughts.

First of all, I don't think you should have done that.
The solution, either a full system recover (probably not necessary) or reinstall the drivers manually. Since they are USB 3.0 (I guess for what I googled about the P850) they use different drivers (specially if we are talking about the sleep and charge ones) so go ahead and download them from toshiba website, that should solve it...

CP2102 Serial to USB converters stopped working

Similar Messages

Maybe you are looking for