CP3525n no Ethernet function even with new Formatter Board.

Hello. I have an HP CP3525n. There is no LED light or response whatsoever when I connect to the ethernet port of the printer. The original formatter board is CE859-60001.
I ordered a new one from HP, CE859-60002, however I am assuming it should be fully compatible even the chips on it have the same model. Still there are no lights coming on from the Ethernet port, after using different cables that work fine on my PC.
I updated the firmware to latest version (via USB cable). I printed out the entire menu tree for the printer and I don't see any settings that is related to networking (usually have to access to them over the network).
I do not have an EIO card, but I'm assuming it shouldn't be required (?). There is a small panel in the back of the printer that I can open to peak inside the printer to see the internal board, nothing look damaged, but perhaps its something inside there that is damaged that caused the Ethernet to no longer work even with a new formatter board?
This question was solved.
View Solution.

I fixed the issue, it was very easy. Just had to hold the "Check" button while the printer is turning on and wait for three LED to flash, then enabled Embedded LAN.
Now I am having a problem with an HP 4250. It have a board that do not have ethernet. I swapped it with another board that does, on the first boot I can see the Embedded JetDirect menu. But it was on static IP so I switched it to DHCP, then turned it off and on. The next time it turned on, the Embedded JetDirect menu disappeared. Even accessing the secret menu when the printer started, there is no option to turn on LAN. This is even the Ethernet port light is on.
I updated the HP 4250 to the latest firmware from here and it doesn help. I have a feeling this firmware doesn't have network function maybe?

Similar Messages

  • Help! I have had my iMac G5 fitted with new Logic Board but it doesn't work

    Help! I have had my iMac G5 fitted with new Logic Board but it doesn't work
    I have just had my iMac G5 First Gen 1.8Ghz fitted with a new Logic Board under the Apple Repair Extension Programme for iMacs.
    I got the iMac home from the repairers and switched it on and everything was working fine for about 2 hours and then all of a sudden the Error Page came up on the Screen (with a big On/Off Switch Logo) and it said I had to shut down.
    So I shut it down waited a few minutes and then tried to re-boot it but nothing happened. All that happended was the Power Light in the Right hand corner came on..but nothing else....
    Help! Any ideas what to do please?

    If you have an external firewire drive (it has to be firewire, USB won't boot on a Rev A), plug it in to the firewire port and turn it on, then boot your iMac and see if it shows on the screen.
    Have you tried to hit the eject (up arrow, the last button on the top row of the keyboard) button when you boot, perhaps the repairers left a disc in the drive? Then try and put your install disc in.
    Miriam

  • Is there a fix for a dead ethernet port besides a new logic board?

    My ethernet port went dead on my IMac.  I unplugged the ethernet cable and plugged it into my laptop and it worked instantly.  I am still able to connect wirelessly.  I bought an apple USB to Ethernet converter and plugged it in.  It worked for about 3 days and then it went dead.  Once again I was able to unplug the ethernet cable, plug it into my laptop and instantly had a connection.  Is there a fix for a dead ethernet port besides a new logic board and if not how do I figure out which logic board I need?
    Thanks
    Step

    This problem baffled me. I kept getting the "ethernet cable unplugged" error after testing my cables good. Was abut to write it off as port gone bad when I found this thread.
    The YouTube video reference above fixed my problem. (http://www.youtube.com/watch?v=u1P6X87qArs)
    Basically go to SETTINGS/NETWORK. Then highlight your ETHERNET port and click the ADVANCED button. From there click the HARDWARE tab.
    Set
    CONFIGURE to MANUALLY
    SPEED to whatever your ethernet speed is, in my case 1000baseT
    DUPLEX - FULL DUPLEX, FLOW CONTROL
    Leave MTU at Standard
    Hit OK.
    Then don't forget to hit APPLY. I didn't do this the first couple of times assuming hitting OK applied these settings. You gotta hit APPLY.
    In about two seconds, my Ethernet connected again.
    I went back and reset it to AUTOMATIC just to test and after doing so got the cable unplugged error again. So I am leaving it on manual and it's working.

  • PowerBook shuts down even with new battery

    My mom has a 12" PowerBook that she recently purchased a new battery for. Even with this new battery, the laptop shuts down seemingly randomly before the battery gets even down to 20%. They sent a new battery, and the laptop still does it.
    Any ideas?

    Sounds like the power manager needs replacing. See these sources which may be able to fix it for less than Apple:
    http://www.dttservice.com/
    http://www.powerbookresq.com/
    http://www.microdocusa.com/
    http://www.macspecialist.com/
    http://www.techrestore.com/
    Or find one at a parts store, and fix it yourself:
    http://www.ifixit.com/

  • Printing blank pages - even with new genuine HP cartridges

    All of a sudden, my 6700 has started printing blank pages, even the copier runs blanks - after replacing cartridges with new HP cartridges.
    I ran all the diagnostics, printer says its fine, printhead was cleaned, and still printing blanks.
    Printer's out of warranty, what should I do? I just bought a ton of cartridges for this....!
    Help!!

    arcalgud wrote:
    All of a sudden, my 6700 has started printing blank pages, even the copier runs blanks - after replacing cartridges with new HP cartridges.
    I ran all the diagnostics, printer says its fine, printhead was cleaned, and still printing blanks.
    Printer's out of warranty, what should I do? I just bought a ton of cartridges for this....!
    Help!!
    The document here may help resolve the issue of blank printing on the Officejet 6700. 
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Can applecare be extended with new logic board

    My Imac is with apple having a new logic board fitted for the second time and before that they replaced the computer. Since my cover runs out in August 09 has apple been known to extend the cover when replacing the logic boards, if so how do you go about it.

    If your iMac is still less than a year old, you can purchase the extended AppleCare out-of-pocket. If you already have an extended warranty, then you can no longer extend it any further.
    Technically, replacement parts (such as a logic board) can have longer warranties than the rest of the computer. This is because replacement parts are covered by either a 90-day warranty, or the remainder of the limited/extended warranty, whichever is longer. This means that if you had a logic board installed on the last day of your warranty, the logic board would still be under warranty for another three months even after the computer's warranty had expired.

  • Kernel panic.. with new logic board

    Hi,
    So I recently replaced my logic board after trying EVERYTHING to fix a somewhat frequently occuring kernel panic. Now however.. it has happened again.
    Does anyone have any idea what could be causing this? I honestly feel like I've tried everything. Could it be bad RAM? I've changed the hard drive, done a fresh OS X install (perhaps its something in my settings from migrating my old stuff back over?), new logic board.. reset PRAM, every suggestion I could find.
    Here is the old discussion before I changed the logic board. https://discussions.apple.com/thread/3902490
    Attached the latest crash log.
    Interval Since Last Panic Report:  389295 sec
    Panics Since Last Report:          2
    Anonymous UUID:                    F57DA50B-3111-4118-A66E-A003634B4A5D
    Sat Aug  4 20:34:26 2012
    panic(cpu 1 caller 0xffffff80002c473a): Kernel trap at 0xffffff80002aaae2, type 13=general protection, registers:
    CR0: 0x0000000080010033, CR2: 0x000000000645e000, CR3: 0x000000002fb3d000, CR4: 0x0000000000000660
    RAX: 0xffff80000668f000, RBX: 0xffffff801014ce80, RCX: 0xfffeffffffffffff, RDX: 0xffffff801014ce98
    RSP: 0xffffff80e7e43200, RBP: 0xffffff80e7e43280, RSI: 0x0000000000000000, RDI: 0x00000000001a13f4
    R8:  0x0000000000000000, R9:  0xffffff800cd25000, R10: 0x00000000001b2fff, R11: 0x0000000000000000
    R12: 0x8000000000000000, R13: 0x0000000000000000, R14: 0xffffff801014ce80, R15: 0x000000000668f000
    RFL: 0x0000000000010246, RIP: 0xffffff80002aaae2, CS:  0x0000000000000008, SS:  0x0000000000000010
    CR2: 0x000000000645e000, Error code: 0x0000000000000000, Faulting CPU: 0x1
    Backtrace (CPU 1), Frame : Return Address
    0xffffff80e7e42eb0 : 0xffffff8000220792
    0xffffff80e7e42f30 : 0xffffff80002c473a
    0xffffff80e7e430e0 : 0xffffff80002da0cd
    0xffffff80e7e43100 : 0xffffff80002aaae2
    0xffffff80e7e43280 : 0xffffff80002adbd4
    0xffffff80e7e432a0 : 0xffffff800026740e
    0xffffff80e7e432d0 : 0xffffff800026804b
    0xffffff80e7e436d0 : 0xffffff8000268448
    0xffffff80e7e43730 : 0xffffff8000571351
    0xffffff80e7e43780 : 0xffffff80002ff905
    0xffffff80e7e437d0 : 0xffffff80002ff59e
    0xffffff80e7e43810 : 0xffffff8000301996
    0xffffff80e7e438a0 : 0xffffff80004ddf0c
    0xffffff80e7e43990 : 0xffffff80004fe325
    0xffffff80e7e43ae0 : 0xffffff80005010d5
    0xffffff80e7e43b40 : 0xffffff800031ccbd
    0xffffff80e7e43bb0 : 0xffffff800030b9c8
    0xffffff80e7e43da0 : 0xffffff800030bdad
    0xffffff80e7e43f60 : 0xffffff80005ccfe8
    0xffffff80e7e43fb0 : 0xffffff80002da5e9
    BSD process name corresponding to current thread: Google Chrome
    Mac OS version:
    11E53
    Kernel version:
    Darwin Kernel Version 11.4.0: Mon Apr  9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
    Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
    System model name: MacBookPro5,3 (Mac-F22587C8)
    System uptime in nanoseconds: 21950465015381
    last loaded kext at 21384906305176: com.apple.filesystems.msdosfs          1.7.1 (addr 0xffffff7f81322000, size 57344)
    loaded kexts:
    com.bresink.driver.BRESINKx86Monitoring          9.0
    com.apple.filesystems.msdosfs          1.7.1
    com.apple.driver.AppleUSBCDC          4.1.17
    com.apple.filesystems.smbfs          1.7.2
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AudioAUUC          1.59
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.driver.AGPM          100.12.42
    com.apple.driver.AppleHDAHardwareConfigDriver          2.2.0f3
    com.apple.driver.AppleHDA          2.2.0f3
    com.apple.driver.AppleUpstreamUserClient          3.5.9
    com.apple.driver.AppleMCCSControl          1.0.26
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.0.5f11
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AudioIPCDriver          1.2.2
    com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d0
    com.apple.driver.AppleLPC          1.5.8
    com.apple.driver.AppleMikeyDriver          2.2.0f3
    com.apple.driver.AppleMuxControl          3.0.16
    com.apple.driver.AppleBacklight          170.1.9
    com.apple.GeForce          7.1.8
    com.apple.driver.SMCMotionSensor          3.0.2d6
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleSMCLMU          2.0.1d2
    com.apple.driver.AppleUSBTCButtons          225.2
    com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.5f11
    com.apple.driver.AppleUSBTCKeyEventDriver          225.2
    com.apple.driver.AppleUSBTCKeyboard          225.2
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          33
    com.apple.driver.AppleIRController          312
    com.apple.driver.AppleUSBCardReader          3.0.1
    com.apple.iokit.SCSITaskUserClient          3.2.0
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCISerialATAPI          2.0.3
    com.apple.iokit.IOAHCIBlockStorage          2.0.3
    com.apple.driver.AppleFWOHCI          4.8.9
    com.apple.driver.AirPort.Brcm4331          530.4.20
    com.apple.driver.AppleUSBHub          4.5.0
    com.apple.nvenet          2.0.17
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleAHCIPort          2.3.0
    com.apple.driver.AppleUSBOHCI          4.4.5
    com.apple.driver.AppleUSBEHCI          4.5.8
    com.apple.driver.AppleEFINVRAM          1.5.0
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.6
    com.apple.driver.AppleACPIButtons          1.5
    com.apple.driver.AppleSMBIOS          1.8
    com.apple.driver.AppleACPIEC          1.5
    com.apple.driver.AppleAPIC          1.5
    com.apple.driver.AppleIntelCPUPowerManagementClient          193.0.0
    com.apple.nke.applicationfirewall          3.2.30
    com.apple.security.quarantine          1.3
    com.apple.driver.AppleIntelCPUPowerManagement          193.0.0
    com.apple.driver.DspFuncLib          2.2.0f3
    com.apple.iokit.IOSurface          80.0.2
    com.apple.iokit.IOSerialFamily          10.0.5
    com.apple.iokit.IOAudioFamily          1.8.6fc17
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.ApplePolicyControl          3.0.16
    com.apple.driver.IOPlatformPluginLegacy          5.0.0d0
    com.apple.driver.IOPlatformPluginFamily          5.1.0d17
    com.apple.driver.AppleGraphicsControl          3.0.16
    com.apple.driver.AppleBacklightExpert          1.0.3
    com.apple.nvidia.nv50hal          7.1.8
    com.apple.NVDAResman          7.1.8
    com.apple.iokit.IONDRVSupport          2.3.2
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOFireWireIP          2.2.4
    com.apple.driver.AppleSMC          3.1.3d8
    com.apple.driver.AppleHDAController          2.2.0f3
    com.apple.iokit.IOGraphicsFamily          2.3.2
    com.apple.iokit.IOHDAFamily          2.2.0f3
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleFileSystemDriver          13
    com.apple.driver.AppleUSBBluetoothHCIController          4.0.5f11
    com.apple.iokit.IOBluetoothFamily          4.0.5f11
    com.apple.driver.AppleUSBMultitouch          227.1
    com.apple.iokit.IOUSBHIDDriver          4.4.5
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.2.0
    com.apple.iokit.IOUSBMassStorageClass          3.0.1
    com.apple.driver.AppleUSBMergeNub          4.5.3
    com.apple.driver.AppleUSBComposite          4.5.8
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.0
    com.apple.iokit.IOBDStorageFamily          1.6
    com.apple.iokit.IODVDStorageFamily          1.7
    com.apple.iokit.IOCDStorageFamily          1.7
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.0
    com.apple.iokit.IOFireWireFamily          4.4.5
    com.apple.iokit.IO80211Family          420.3
    com.apple.iokit.IOUSBUserClient          4.5.8
    com.apple.iokit.IONetworkingFamily          2.1
    com.apple.iokit.IOAHCIFamily          2.0.8
    com.apple.iokit.IOUSBFamily          4.5.8
    com.apple.driver.NVSMU          2.2.9
    com.apple.driver.AppleEFIRuntime          1.5.0
    com.apple.iokit.IOHIDFamily          1.7.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          177.5
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          331.6
    com.apple.iokit.IOStorageFamily          1.7.1
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.5
    com.apple.iokit.IOPCIFamily          2.6.8
    com.apple.iokit.IOACPIFamily          1.4
    Model: MacBookPro5,3, BootROM MBP53.00AC.B03, 2 processors, Intel Core 2 Duo, 3.06 GHz, 8 GB, SMC 1.48f2
    Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
    Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x393930353432382D3031322E4130304C4620
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x393930353432382D3031322E4130304C4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.198.4.20)
    Bluetooth: Version 4.0.5f11, 2 service, 11 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: SAMSUNG HM501II, 500.11 GB
    Serial ATA Device: MATSHITADVD-R   UJ-868
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x04600000 / 3
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06110000 / 5
    Any help at all or new fixes I could try would be greatly appreciated! Very frustrating!

    Cheers - I've run Rember a few times and it hasn't come up with any errors, but I've heard it's not a 100% accurate test. Looks like that's the only thing left it could be!

  • Time Machine Issue with new system board.

    OK MAC Fans here is an issue that I discovered with Time Machine (TM).
    First I have a 17” MacBookPro that has two 1TB external HDs and a 30” monitor attached to it.
    Something happened to my system and the system board had to be replaced.
    The Mac was sent to TX and a new system board was put in it and the very latest OS (10.5.2) was installed on the hard drive.
    The Apple store added my profile so you think everything would be good?
    Wrong!
    None of my applications made it through.
    But I was thinking let just use Time Machine to restore them. WRONG in a way.
    The first thing I did when I got home was set up TM. I pointed TM to the external HD that has all of the previous backup files and TM wanted to backup the system. During the backup I notice that TM created a new directory for the backup files.
    The name of the directory was the name of my MAC. The old directory was also the name of my MAC but with the new OS software release it was stated that you could not use any special characters when naming your MAC or TM may not recognize your backup files (there is a note on this under support).
    The new name is FirstnameLastnameMacBookPro17 the old name was Firstname Lastname’s MacBookPro 17”. TM created a new directory named FirstnameLastnameMacBookPro17 and this was the only files that are visible in TM.
    I deleted the new directory and renamed my MAC back to the old name and TM created a NEW directory with the old name. Now there were 2 directories with the same “old” name. I can not get TM to use the old directory and display the old backup files.
    I was able to drag and drop the files and applications I needed from the previous backup folders back to where I needed them to be so all is not lost but I can not restore files from TM.
    Also I renamed my MAC back to FirstnameLastnameMacBookPro17 and TM automatically changed the name of the new directory to the new name.
    I tried to drag old backup folders from the old TM directory to the new TM directory but received an error that the files can not be modified.
    The only thing that I can think is that when the system board was replaced TM got confused and did not recognize it as the same system. So now I am starting my backup history all over again. The old backup files are good, the only thing is that I have to drag and drop items I want from those folders to the location I want. I can not use the old backup files in TM.
    Dose any one have a magic pill (red or blue) I can take to make the old files visible in TM?

    I decided not to worry about the syncing my TM. I was just at the Apple store and they have decided to replace my MacBookPro. I am going to start my backups on the new system all over again. I know I can drag and drop files that I want from the old files to the new system if I want and that will be go enough.

  • Still having major importing difficulties - even with new update to 6.0.3

    I am at the point of despair. I had SO hoped that the new windows updates and iTunes 6.0.3 would solve my ongoing problems with updating but it doesn't.
    After a varying length of time while importing (second or two or during 2nd or third track) iTunes freezes and won't respond even to Ctrl Alt Del and computer needs a restart. Happens with any CD in either drive. Tried installing with and without Norton running and it still crashes.
    I can buy music on line fine and sync this to iPod just can't import it from CDs.
    The only thing different this time is that I get error (-50) when trying to import from the F drive rather than just immediate crash.
    Diagnostics are here again for info. Thanks in anticipation
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    GBT_ AWRDACPI
    iTunes 6.0.3.5
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce4 MX 440\GeForce4 MX 440
    Found aspi32 running.
    IDE\DiskST380021A______________________________3.19___, Bus Type ATA, Bus Address [1,0]
    IDE\DiskWDCWD1200BB-22GUA0____________________08.02D08, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSAMSUNGDVD-ROM_SD-616Q_________________F404___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomNEC_DVD_RW_ND-4550A____________________1.06___, Bus Type ATA, Bus Address [1,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: SAMSUNG DVD-ROM SD-616Q, Rev F404
    Audio CD in drive.
    Found 22 songs on CD, playing time 78:07 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:35:20
    Track 3, start time 07:20:42
    Track 4, start time 12:25:06
    Track 5, start time 15:46:63
    Track 6, start time 18:52:28
    Track 7, start time 22:23:44
    Track 8, start time 27:51:56
    Track 9, start time 32:02:07
    Track 10, start time 36:41:12
    Track 11, start time 38:45:02
    Track 12, start time 42:27:67
    Track 13, start time 44:26:10
    Track 14, start time 49:49:50
    Track 15, start time 52:44:31
    Track 16, start time 55:33:74
    Track 17, start time 57:51:19
    Track 18, start time 59:46:03
    Track 19, start time 63:40:39
    Track 20, start time 67:42:64
    Track 21, start time 71:35:17
    Track 22, start time 74:45:01
    Audio CD reading succeeded.
    Get drive speed succeeded.
    F: _NEC DVD_RW ND-4550A, Rev 1.06
    Audio CD in drive.
    Found 17 songs on CD, playing time 59:18 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 05:25:00
    Track 3, start time 08:37:70
    Track 4, start time 11:09:70
    Track 5, start time 17:21:72
    Track 6, start time 20:42:10
    Track 7, start time 23:30:12
    Track 8, start time 28:16:62
    Track 9, start time 29:52:65
    Track 10, start time 32:32:05
    Track 11, start time 34:42:32
    Track 12, start time 35:43:07
    Track 13, start time 38:53:70
    Track 14, start time 45:36:07
    Track 15, start time 51:33:62
    Track 16, start time 52:55:55
    Track 17, start time 57:29:57
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 8 16 24 32 40 48.
    The drive CDRW speeds are: 8.
    The drive DVDR speeds are: 8.
    The drive DVDRW speeds are: 8.
    Here are the diagnos

    Have now even repaired windows and it still hangs. Apart from totally wiping my computer and starting from scratch again any further ideas??

  • Cannot load recovery disk...even with new HD

    Hi,
    I have a Toshiba Satelite M55-S135.
    I'm currently having this problem:
    My hard drive was making very loud clickey noises. Very shortly after this started, my computer flashed the blue screen of death, and then gave me the PXE-E61 error message of "Media Test Failure, Check Cable." My friends said the hard drive (HD) was fried. So i bought a new one. I put it in, made sure it was set to "Master" on the jumpers. Turned it on, got the same error message. I can't get windows to load. So then I thought, oh that's because there's no Windows installed! I went into BIOS and made SURE that it was recognizing the new HD, which it does. I then made it load from CD/DVD, the recovery disk starts up all fine and dandy, then I get the huge "Wrong Machine" error and I feel like I've had this before, and I see a gazillion other people have had. I know for a fact this is the correct disk. I took it out, clean it, inserted it back and tried again. Still didn't work. I saw another person who had this issue, and they suggested trying to prompt it this way instead: Q: > cd\base > os.bat
    I tried this, still didn't work, because then it says it cannot find ghost.err. I put the disk into another laptop, and loaded it, and I made sure it detected it and saw all the correct subfolders and everything, etc. so there is nothing wrong with the disk. I'm not really sure where else to go from here. So I would appreciate any assistance. Oh, I've also seen many references to downloading some utility from the downloads section on the toshiba website but how am I even supposed to get to that on my broken laptop if my computer is broke and windows won't load?
    Thanks for any future suggestions! I appreciate it

    SOLVED !
    Probably my old HD was not defective, the problem is with the S-ATA bus interface.
    After moving the new internal disk to an external Firewire case, the iMac did boot correctly and no more freezing after OSX updates; before that I also used a new cable (the one connecting the HD to the bus), with no luck.
    So, I think the errors of the AHT and Apple Diagnostic are not so helpful, given that it's impossible to know if the broken part is the HD, the cable or the interface on the MB (and all the tests of the motherboard passed ok).
    It did cost me a lot anyway: new HD, a good Firewire/USB case, new SuperDrive and a few ours of work of a technician (today I could stay with him to learn how to open the iMac).
    Now it is running
    Gabriele

  • 6 GB ram and hard-freezes & blue-screen. even with new drive

    I'm on Vista 64 SP and have the X-Fi Platinum. Just upgraded to 6 GB ram from being on 2 GB previously, and now I consistently get hard freezes and blue-screens any time I attempt to do anything half-way audio intensive (try play a game or listen to some music in winamp). I'm on the latest march drivers from creative. Even tried uninstalling and reinstalling the creative drivers all together. Still no luck.
    I know that it's the X-Fi causing it too because if I disable the card in the device manager and use my usb headphones instead i get *no* lockups or blue screens whatsoever. As soon as i reenable the card i get lockups again.
    Does anyone have any suggestions or is this still a case of poor 64-bit code from creative

    i'm pretty sure its not the ram. i ran ram tests, and close to maxed out my physical ram usage by loading large applications, and have spent many hours now using the ram with the x-fi disabled with no problems.
    looks like someone else is having the same problem with the new drivers. see my reply to their thread:
    http://forums.creative.com/showthread.php?t=3777&jump=true#M3777

  • Printer not printing black even with new ink cartridge

    Responded to pop-up that ink was low. 
    After installing new black ink cartridge, attempting to print ink status report.  colors show OK but black is not printing at all.  Tried second new cartridge to no success. 
    Tried turning printer off and restarting - no change to problem.  still not printing black. 

    Hi,
    Please follow this HP document for this issue
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c03946666&cc=us&dlc=en&lang=en&lc=en&product=408​...
    hope this helps
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • HP Photosmart premium c309g-m printer prints blank pages even with new cartridge

    I have an HP Photosmart premium c309g-m printer and I tried to copy a black and a color document. The printer goes through the motions but the page is blank. I have tried put a new black cartridge in and still prints a blank page.

    Thank you everyone who responded. I would like to let you know my printer is now up and working. It was so nice and helpful of you to respond with links and suggestions. I appreciate it.

  • Officejet 4620 All in one Not printing even with new cartridge

    My printer has suddenly stopped printing.
    There are no error messages.
    My ink level is full.
    It slowly started "running" out of ink as I was printing.
    New cartridge.
    Cleaned printer heads twice.
    Ran print quality report and it acted like it was printing but didn't.
    Any ideas??

    The document here may help resolve black not printing on your Officejet 4620. Be sure to check the vents, if they are blocked the printer will appear to be running out of ink early in the cartridge life.
    If the troubleshooting steps there do not resolve the issue I sould suggest you contact HP, 1-800-HPINVENt if you are in the US or see the document here for elsewhere.  They may be able to help resolve the issue even if the printer is not in warranty as described in this post.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Photosmart C620 not printing black ....... even with new cartridge

    Have tried everything your support page & help screens suggest:
    originally was only printing top several inches of page
    now prints no black text
    unplugged
    diagnostic pages  ........ shows no diagnosis, no black square, color squares are very vivid
    test pages are blank
    uninstalled printer
    reinstalled printer
    cleaned heads
    bought new black cartridge
    STILL NO BLACK..................
    This question was solved.
    View Solution.

    C6280 has separate ink cartridges and printhead. It sounds like the printhead maybe badly clogged or failed.
    I would suggest try "clean printhead" a few more times, if still no black printed, the printhead may have reached it's endoflife.
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

Maybe you are looking for