CP4525 laser color- dang thing won't print

Working fine earlier today. Message on screen said: "Tray overfilled"...But it *wasn't* overfilled. Tried putting less & more paper. No response. Won't print even though it says "Ready".
Tearing hair out. Help! Thx!

I am currently in the same boat. I love how you posted this legitimate issue 3 years ago and there is still no resolution. It really reflects on the company's character and attitude toward their customers.
Hopefully this will get a response.

Similar Messages

HP Color Laserjet 2605dn won't print the red color

My HP Color Laserjet 2605dn won't print the red color. It's comes out very light, barely a pink color. It's not the ink cartridge because it's full and I'm having this problem even when I change cartridges.

Hello dp146,
I understand your concerns. Unfortunately, I need to direct you to our Enterprise Business Community Forums.
This will be the right section to troubleshoot this issue.
Good luck.
I worked on behalf of HP.

HP Color Laserjet 1515n won't print

Haven't been able to find an answer anywhere. Even disconnected from the network and stand-alone, the HP Color LaserJet 1515n (product number CC377A bought at Costco not too long ago) won't print. Can't print configuration page, no demo page. Nothing. It just sits there saying "printing" and flashing but never does anything else. Tried resetting through the menus. Didn't work. Tried holding down the right arrow and X to reset NVRAM. Didn't work. Any help? For when I do get the printer to work on it's own, I'm on Windows 7.

Hello dp146,
I understand your concerns. Unfortunately, I need to direct you to our Enterprise Business Community Forums.
This will be the right section to troubleshoot this issue.
Good luck.
I worked on behalf of HP.

HP Color Laserjet CP1215 won't print on local computer

I am using Windows XP.
I have an HP Color LaserJet CP1215 connected to my computer by a USB cable. It has printed many times, but I don't use it often. I turned it on this morning to print an excel spreadsheet in color. I use an HP Laserjet 4100 connected on a regular printer port for most of my printing. Anyway this printer will not print from any program. It will not print a test page. I turned it off and on; restarted my computer; switched out USB cables; downloaded a new driver from HP. I also download the diagnostic tool from HP and when it scans it, it finds it and says it is fine, but it will not print a test page from the diagnostic tool. I have stopped the printer spool and restarted it. I have done absolutely everything I can think of or that I have seen as a solution on HP.com and in my windows printer diagnostic tool.
The weird thing is it prints when connected to another computer. I hauled it to another office and connected it to another computer (Windows 7) and when connected it told me there was a problem with the driver, so I downloaded a driver from HP.com and it worked fine. The REALLY weird thing is I can share it on my computer, go to another office, add it as a network printer and it works. Why would it work as a shared printer, but not work for the computer to which it is physically connected?
When I attempt to print, the document shows up in the printer spool and says "printing." Then after a few minutes, it says "deleting" even though I have not manually deleted it.
Anyone have any ideas? I am fresh out. I hate to think I have to walk to another office in my building to print to a printer that is right beside me. Although it may be a good exercise.

I am currently in the same boat. I love how you posted this legitimate issue 3 years ago and there is still no resolution. It really reflects on the company's character and attitude toward their customers.
Hopefully this will get a response.

Pantone Color 5615 Coated Won't Print On 1 of 2 Identical HP DesignJet 5500s

Hi,
We've run into an odd problem where we have 2 locations with identical setups: Creative Suite Design Premium 4, Mac Pros, and HP DesignJet 5500s. The same InDesign file prints fine in one location with a DesignJet 5500, but when we print the same ID file at the second location that has a second DesignJet 5500, the only color that doesn't print correctly is Pantone 5615 Coated. We're using same printer driver version for both printers. I haven't yet checked Firmware versions for both printers.
On the printer that won't print Pantone 5615, the printer doesn't print it correctly in any of our Creative Suite applications. We tried creating completely new files in ID, PS, IL and the color won't print. We've checked color management in Bridge and ID and they seem OK. We're not currently having any other color problems printing with any other Creative Suite files with this printer. Colors are accurate all the way around.
I read the forum and saw a lot of posting about Pantone colors, so I will try some of the suggestions related to Pantone issues. At the moment, I'm not at the location with the problem printer and can't try the suggestions until next week.
When I was at the location yesterday, we tried printing Pantone 5615 from Quark 7.5 and the color printed fine. Obviously, we don't want to use Quark on an ongoing basis for this project. It seems likely that it isn't a printer hardware problem since the Pantone color prints out fine from the Quark file. There seems to be a setting somewhere in Creative Suite that the printer at our one location doesn't like, or there is some setting on the printer that is different than the other printer. I don't think it's a network problem with the one printer versus the other printer because I would think Quark would then run into the same problem.
Any suggestions?
Thanks,
Jason

I have the same issue with my 44" Z3100ps GP Photo, but it is when I print from Photoshop CS5. I am running OSX 10.68 and since the last Apple/HP printer driver update this last Summer my printer will not print solid black strokes or borders around an image, yet the image prints perfectly.
I tried to roll back the drivers with no success. If I make a solid black rectangler file and try print it nothing at all prints. If I scribble in Photoshop with white paint brush in the middle of that same file the printer skips the left edge of the black rectangle and then prints the middle scribbnle and right egde of the rectangle folowing the contour of the scribble on the left.
Had me baffled and still does, the printheads are in good working order. I print large canvas photos with 1.5" black borders used to cover the sides of stretched canvases. The only way I have found around this issue is to add an inch or so to the canvas size all the way around in photoshop and make it white. That seems to fool the printer into printing the file with the full black border. Still this is not a real fix, but at least it keeps my printer running.
Let me know if you find a solution to this. HP support doesn't help as they only give support to in warranty printers. Maybe Apple could help with the drivers?
Lucas

Color laserjet CP1525nw won't print in color

I installed both the PCL6 and PostScript drivers on my Surface Pro 3 to print to my Color LaserJet CP1525nw. The printer is connected to my router. The printer prints but only in grayscale. What can I do to be able to print in color and continute to print through my router?
This question was solved.
View Solution.

Hi @PaDunc ,
I see that you are experiencing issues printing in color from the printer connected to the router. I would be happy to help you.
Please clarify, if the printer is connected to the router by a ethernet or USB cable?
Did you install just the Universal Print Drivers or did you try the Full Feature Software also?
I would recommend the Full Feature Software if that isn't one of the drivers you have already tried.
Try and print the Supplies Status page to see if you have color, just to rule out a hardware issue.
Printing or Viewing the Supplies Status Page.
Make sure the greyscale option isn't enabled in the print driver.
1. From Devices and Printers, right click your printer.
2. Then click the Printer Properties, Preferences button.
3. Click the Color tab.
4. Make sure Print in Grayscale isn't checked.
Did the colors print?
What are the toner levels?
Are you using Genuine HP Toner?
Try these steps in this document, to see if it will resolve the issue.
Resolving Print Quality Issues.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Color Laserjet 3600n won't print from network

Our small office has an HP Color Laserjet 3600n that has worked great connected to the network via ethernet cable for many years. When we came in this morning it refused to work after a power outage last weekend, and print jobs would just remained trapped in the print queue with either "printer unavailable" or "printer is busy" messages. No error messages appearred on the printer, and it prints fine from an attached USB cable. I verified the network cables, and am even able to access the printer's web interface a-ok via it's web address. It normally operated on all the default settings, I believe, and I can't figure out what else could be the problem other than a hardware fault. Any clues? We have a bunch of toner cartridges and would hate to have to buy a new unit now.

Hi,
Please follow in the link below :
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

HP Color Laserjet 2605dn - won't print in color

I have an HP Color Laserjet 2605dn printer and recently purchased a new computer with Windows 7. Our IT dept. installed an updated driver (HP Universal Printing PCCCCL 6) but now my printer will not print in color nor can I find a setting where I can adjust it.
I also cannot duplex but found helpful post that I will use to try and correct that issue. If you can help me I would appreciate it. IT seems to busy to help and my work involves a fair amount of graphics so I need my color.
Thank you!!!

This post may be old but someone might use it later. Right click on the printer and go to properties. On the General tab go to printing preferences. (Windows 7- double click printer, click Adjust print options.) Advanced tab - expand Graphic, under Image Color Management change: ICM method to ICM handled by printer or host system. Apply and close out the windows. Run a test print to make sure it works.

Laser jet pro m475 won't print through the wire

Hi laser jet pro 400 as just decided it's going to print anymore through the wire. Tried three different wires no good. It says not communicating with printer. Tried others computers and it the same.
Any ideas
Thanks Craig

Digcon,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

CP2025dn won't Print in color after downloading Windows 10

I recently downloaded Windows 10 on my laptop (ASUS) and now My Color Laserjet CP2025dn won't print in color. Yes, I have already quarduple checked that it's marked to print in color. I tried printing from Powerpoint, Adobe, and Word. No luck. I also tried to download some drivers but it still won't work. It seems to be printing in black and white just fine. Please help as soon as possible. I have some very important things to print off.

I just tried printing from my friends Laptop, she still has windows 8, and it's working fine, so I know this is a windows 10 issue, can someone please help me with this?

Epson Workforce 30 printer won't print

I have installed all the latest updates, including an Apple Epson printer update, and the printer driver from Epson's website.
Still this thing won't print. All that happens is an error in the printer queue.
Anyone have any clues?

Some suggestions to try
Another USB cable
Turning off the Epson power for a minute and then back on again
Removing the print queue and adding it again
Resetting the printing system
Note that when you reset the printing system the printers in Print & Fax are deleted, but not their printer drivers. So you don't need to run the printer driver installers again, you just need to add the print queues again. For a USB connected printer, this can be done by simply unplugging the USB cable and plugging it back into the Mac agian.
How to Reset the Printing System
1. Open System Preferences > Print & Fax
2. Move your mouse over the Printers list
3. Hold down the Control button and click the mouse
4. Click the "Reset printing system ..." popup
5. Restart your Mac

HP C7250 has all colors of ink but won't print in color

My HP C7250 shows that all ink levels are OK on the display, but it won't print in color becasue it says tht the Cyan cartridge is low. I recently replaced the Cyan cartidge with a new one and the display shows that the ink level is full, but when i go to print I get a message that the ink level for Cyan is still low.
The printer is out of warranty. Anyone have an idea of how i can get this printer to print in color again?
I have tried reinstalling the catridge, and the same thing happens.

I know this was a while ago, but did you resolve it easily? Mine has full colors, including cyan at 80%. It won't use the cyan for color printing at all, so all the colors are off. I think I have to chagne teh printhead since I've already cleaned them and changed the ink cartridge. Just curious. Thanks.

HP Envy 5530 won't print in color from Mac

My printer won't print anything in color from my Mac. I've tried printing from Word and from a PDF, and each time only black ink will show up. I've tried:Removing the black ink catridge and printing with just colorShaking the color ink cartridgeRemoving and putting back the color ink cartridgePrinting a test page (color doesn't work for this, either- nothing prints at all when I do this)Double and triple checking my print settings The only ink color that my computer says is "low" is yellow. I'm printing wirelessly, but because black ink prints fine, I'm willing to bet there's no connection problems. DO NOT try to sell me more ink; I am already upset with HP enough as it is. The last thing I want to do right now is buy more of its ineffective products. Please help me fix this problem.
Thank yoooouuuuu

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are having issues with printing in colour from your Mac to your Envy 5530. I can help with that. To start, this document outlines how to troubleshoot print quality issues with your printer. When you get to the Solutions that suggest replacing the cartridges you can instead click on this link to contact HP Support. On this page if you scroll down and fill out the form you will find their contact number. I will warn you that if the cartridge is showing as low their solution may be to replace the cartridge with a new cartridge. I hope this helps and I hope you have a great day!

The cyan color won't print when using our HP Pro 6500 Officejet printer

the cyan color won't print when using our HP Pro 6500 Officejet printer. Can I get help with this?

This doesn't make sense. The printer is exhibiting behavior noticed when a network printer is connected to a laptop while the laptop is connected to a VPN. But in this case, neither the printer is connected on a network, not is the laptop connected to a VPN per se.
Are you sure all the latest drivers for your laptop have been installed? That's pretty much the only thing I can think of right now.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

C4280 won't print one color

My C4280 started to print color badly a while ago and I new that the cartridge was getting low so I initially refilled it. Put it back in and it wouldn't print yellow. So I figured that I screwed something up and went and bought a new remanufactured cartridge today. Same thing, no yellow. Got on the phone with tech support and they bascially said that it sounded like the head is bad and of course I'm a month and a half out of warranty. Then they had the audacity to give me a "deal" on the exact same model. Anyone else have a problem like this that they've been able to fix? Am I missing something obvious?
Message Edited by Caedmons on 06-01-2009 12:05 PM

HP c7180 - Won't print one color[ New ]
12-28-2010 04:50 PM
My C7180 displayed a message that the ink cartridge was out of date and immediately stopped printing which used Mageneta. I replaced the cartridge and it still won't print this color. All other print functions and features are fine. If a photo or print requires red, however, it prints as yellow. Print tests show a small single horizonal line where the mageneta should be. Additionally, I've run the "clean print head" command. Any ideas or suggestions? Thanks.

CP4525 laser color- dang thing won't print

Similar Messages

Maybe you are looking for