CP5 and PowerPoint not Roundtripping

Has anyone here experienced CP5 and PowerPoint not roundtripping?
One of my coworkers has two slides in a presentation that CP5 isn't reading the bullets being moved to the right. The presentation is linked according to the library and I made sure the original PowerPoint file wasn't open on his computer. I think that might have been a problem earlier. I watched him when in CP5 he did the edit slide in PowerPoint and do the edits and save but when we came back to CP5 the bullets still weren't where they were in PowerPoint.
Any ideas?

I don't see the option in TOC Settings that you refer to. We are using CP5.
We've refreshed the TOC. We've rebooted the computer. It just won't play the last three options in the TOC.
Susan Wright (Equilady)
Remember, the mighty oak was just a nut that held its ground.
http://www.equilady.com

Similar Messages

Whiteboard, Polls, Q&A and Powerpoint not working over Federation

Hi,
I have a problem with whiteboard, polls, Q&A and Powerpoint sharing over federation, if the federated endpoint is behind a web proxy with HTTPS inspection enabled. Audio, video and desktop sharing works fine.
Scenario:
2 Domains which are federated (DomainA and DomainB), all Lync servers are full patched (June 2014)
2 Users (UserA from DomainA and UserB from DomainB) works with full patched Lync Client 2013. Both Users work on their internal LAN. The client cannot reach the internet directly. Web requests go to through a proxy with HTTPS inspection.
1. UserA starts a Chat with UserB. UserB accepts.
2. UserA adds the whiteboard. UserB gets the "Add meeting content" button and accept.
3. UserA gets the whiteboard, UserB gets a error message "Because of network issues..."
In this scenario, UserB's Lync client tries to connect to WebConf Edge of DomainA over TCP/443 (HTTPS). Because UserB cannot reach the Internet directly from the inside LAN, the request goes trought the web proxy of DomainB (ProxyB). The web proxy is configured
with https inspection, so on the WebConfEdge I get requests from the web proxy of DomainB which are also answered by the WebConf Edge. On the pc of UserB I also get the answer, but signed with a certificate of the web proxy which is added as trusted root certificate
(normal behaviour if https inspection es enabled). On the network trace, as I can see, UserB resets (ACK, RESET) the connection to WebConf Edge directly after receiving the first https response.
Then I changed the web proxy (ProxyB) to bypass the https inspection for the ip address of the WebConf Edge of DomainA. The same scenario works fine now. It always works fine, if UserB have directly access to web conf edge of Domain A (UserB is in the internet
and not in the LAN).
I also could check this vice versa. It depends on which side, the conferencing is hosted. As soon as the other user connects through a web proxy which doesn't bypass the request directly, the user do not get the web conf content.
Then I tried with other domains and other environments, but all of them had the same issue, as long as the web request from the foreign user goes throug a web proxy. It seems there is no dependency on which product of web proxy will be used, it seems to
be a dependency on https inspection and all changes the web proxy do in this case with a web request and response.
I always tested with whiteboard, but the same behaviour is with Q&A and polls and also with Powerpoint (WAC). For Powerpoint it's only because the foreign user do not get the URL from web conf, so the client do not know how to connect to the WAC of DomainA.
During the tests with several Domains (customers), I see a corrupt "Client Hello" from a specific web proxy. In the list of cipher suites in the "Client Hello", the web proxy added an additional byte (0xFF) at the last TLSCipherSuites
entry, so the extensions, followed by the ciphersuites list in the "Client Hello" are not readable. So the connection will be reseted directly.
Because my workaround depends on the web proxy of the foreign side (configure bypass) it's not really a practicable way to make sure, the web conferencing content will work. Is there an other way to solve this issue?
Regards, Stephan

Hi,
From your description, the issue should be the
https inspection on the web proxy, maybe you should change from the web proxy side.
You can refer to the link of
Enabling HTTPS Inspection causes some applications to stop working
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or
information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Word and PowerPoint not starting up

Up until late last week, Office 2004 worked fine for me (I know that I ran PowerPoint on Thursday, after the 10.5.3 update).
This week, Word freezes on the blue info box while opening up. When I go to Force Quit, it says that it is "not responding".
PowerPoint does the same thing, but it gets past the opening orange box. I can see the toolbar, but then it freezes, and I have to force quit.
Note that Excel is working fine through all of this.
I try updating to the latest version of Office (11.4.2, I guess I had 11.4.1). Same thing.
So I uninstall, and re-install using the CD. Out of the box, the programs are running fine. I download ALL EIGHT updates, and start the update process, one at a time. After 11.4.0, I stop and try opening the programs: they are freezing again. Upgrade to 11.4.2, and now PowerPoint works, but Word still freezes.
I don't know what else to try... any ideas? I really hate the idea of giving Microsoft more money (for 2008) simply because their old version stopped working.
UPDATE: well, I got PPT to run once, now it is freezing...
Matthew
Message was edited by: Matthew Kelling

Most likely, you have a buildup of "transaction files" in the mboxlist directory. This is caused by one or more processes crashing, and leaving the database locked, so stored cannot process those transactions.
You can do one of three things:
1. Attempt to start the server. Stored will start, and start processing the transaction files. Eventually, it will complete that processing. To tell when this happens, note the PID file in your server's config directory. The one for stored will contain, "initializing" until it's done, and then say, "ready". You can then successfully start the rest of the server.
2. Remove all of the files named, "LOG*" in mboxlist directory. Start the server up, and it should start nomally. IMPORTANT: You must run reconstruct -m after removing the log files, to re-create the data that you removed. Users may complain that new mail folders are missing, until the reconstruct completes.
3. LAST RESORT, "rapid recovery". To be used in case of disaster only. . . .
Remove all files and directories in mboxlist.
start the server; it should start immediately. Users will only have access to INBOX
run reconstruct -m to enable other folders.

CP5 and TOC not working on bottom half

Has anyone else experienced the TOC not opening half the pages listed? I've looked at preferences and the skin and don't see any reason why the TOC won't open items listed on the bottom half of the page. We've tried republishing it incase it was a gremlin but it still doesn't work.
The first halp opens the pages the second half of the listing light up like they are working but their associated pages still don't open.
Susan

I don't see the option in TOC Settings that you refer to. We are using CP5.
We've refreshed the TOC. We've rebooted the computer. It just won't play the last three options in the TOC.
Susan Wright (Equilady)
Remember, the mighty oak was just a nut that held its ground.
http://www.equilady.com

I recently updated my OS to OS X. I had to update my word and powerpoint etc... to 2011 version, but now when I want to open a .doc file made in word 2003 it removes all the text in it! I did not back anything up!

I recently updated my OS to OS X. I had to update my word and powerpoint etc... to 2011 version, but now when I want to open a .doc file made in word 2003 it removes all the text in it! I did not back anything up! All my mums work is on there for her job and now she cant use it! I need help fast!

If you updated from 2003 that must be on a Windows machine, can you recover them from there?

I just updated to Lion and my Microsoft Word, Excel and PowerPoint will not open because PowerPC applications are no longer supported. I bought this software from Apple and the store installed it when I bought the MAC. What do I do?

I just updated to Lion and my Microsoft Word, Excel and PowerPoint will not open because PowerPC applications are no longer supported. I bought this software from Apple and the store installed it when I bought the MAC. What do I do?

Buy version 2011 of MS Office.
Or you can download OpenOffice, LibreOffice or NeoOffice, which all come very close to working with MS files just like MS Office does.
Or iWord, I have heard, you can purchase.

Pages and key note not compatible with word and powerpoint

Dear members
I have received valuable help here, but still pages does not open word documents, I am having problems because I am the only person in my organisation who uses Mac! All the documents are in word format. Yvan kindly helped me and told me to use some tests. I wonder what kind of tests are, I spoke with Apple care, they spent 40 min on the phone doing the following after explaining:
I have a new Mac pro laptop which came as a replacement because the first one had a problem with bluetooh.
The previous Mac pro could open word and powerpoint using pages and key note
When I received the new mac pro I passed the information to the previous one to this one using time machine
I noticed immediately that the new mac pro could not open word using pages
After this I have received snow leopard , installed it , the problem remains
I explained this to the technician on the phone
Then:
put caches on desktop
updated the snow leopard to 10.6.1
created a file and saved as a word file using pages, but pages still not open the same doc created by it
The technician tried to contact a senior member and I was left waiting for 20 min to speak with a senior and never happened, I called again and they did the same
Of course that there is something wrong with my system because the previous faulty mac could open word and powerpoint
Any ideas?
Best Regards
Omar

I love iWork, but honestly, if I were the only one in an organization to use a Mac, I would get NeoOffice or Open Office, which are intended to be directly compatible with their Microsoft equivalents. Or, you know, buy MS Office for the Mac.

I've recently downloaded Lion and find my Microsoft excel, word, entourage and powerpoint do not function. It says these functions are not now supported. Why and how do I get to use them again?

I've recently downloaded Lion and find my Microsoft excel, word, entourage and powerpoint do not function. It says these functions are not now supported. Why and how do I get to use them again?

philippnoe wrote:
What a "great" Program which is supporting many nice but not mandatory things but is not supporting a Program which is used day by day from many users ... and especially this Program is also sold officially by apple !!!
Yeah!, Why, Lion won't even run my old DOS programs!

Powerpoint 2011 mac - video and audio not working

Hello all,
I am using Powerpoint 14.2.5 on my mac running osx 10.8.2
When I try to add video (.MOV / WMV / MPEG-4 etc) or audio files (MP3, AIFF, WAV etc) they appear on the slide but the play controls will not work.
Also when I play my slideshow they do not function.
I can get a movie to play if I set it to play automatcally when that slide is reached but even then it only plays half of the video not the whole thing.
In any case I only want it to play when you click to the next event in the slide show.
Very frustrated.
QuickTime is installed ok.
All updates are installed for both osx and Powerpoint.
Any tips?
M

http://www.microsoft.com/mac/support

Does anyone have a list of the fonts that may not translate well between keynote and powerpoint?

does anyone have a list of the fonts that may not translate well between keynote and powerpoint?

Is this it? (might take a few seconds to transfer to the right page)
http://web.archive.org/web/20090223143955/http://kb.adobe.com/selfservice/viewContent.do?e xternalId=kb404440&sliceId=1
MTSTUNER

I recently purchased a MacBook Air and was told by Apple that Keynote and Pages were compatible with MS Applications.. I have since tried to open a Powerpoint Presentation but it comes up with an error message and is not right. Help!

I recently purchased a MacBook Air and was told by Apple that Keynote and Pages were compatible with MS Applications.. I have since tried to open a Powerpoint Presentation but it comes up with an error message and is not right. Help!

If there are fonts, transitions, builds, video or audio in the PowerPoint file that are not compatible with Keynote, it will either prevent the presentation opening or Keynote will substitute the settings causing playback changes.
I use Open Office to play and open any PowerPoint files sent to me, they play exactly as in PowerPoint.
Open Office is free, you can download it here:
Open Office for Mac

Why is my powerpoint not working 10.9? i can't play my existing file and new files that i work..? how to fix that one..? pls help..!

why is my powerpoint not working 10.9? i can't play my existing file and new files that i work..? how to fix that one..? pls help..!

R Cubss,
You might want to read down this thread. There are a lot of tips-n-tricks, and maybe one will be right for you.
http://www.adobeforums.com/webx/.59b6565c/43
Good luck,
Hunt

WORD, EXCEL, and POWERPOINT now crashing when saving new file

I have Microsoft Office 2004 WORD, EXCEL, and POWERPOINT, which were working just fine for several days on 10.5.1. (all updates are current). Now, every time I try to save a new document, all 3 apps crash, with the following thing in common in the crash log:
0xb80ec881 gettimeofday_wrapper + 37593
This doesn't happen when opening an existing file, and saving changes to it. Note: A few days ago, I ran Disk Utility to do a permissions repair for another issue - could this have caused this issue?
Any ideas???
Thanks,
Below is the complete crash log from one of the EXCEL crashes:
Process: Microsoft Excel [144]
Path: /Applications/Microsoft Office 2004/Microsoft Excel
Identifier: com.microsoft.Excel
Version: 070724 (11.3.7)
Code Type: PPC (Translated)
Parent Process: launchd [69]
Date/Time: 2007-11-26 18:33:08.466 -0500
OS Version: Mac OS X 10.5.1 (9B18)
Report Version: 6
Exception Type: EXC_CRASH (SIGILL)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0
Thread 0 Crashed:
0 ??? 0x801a194a 0 + 2149194058
1 translate 0xb80ec881 gettimeofday_wrapper + 37593
Thread 1:
0 ??? 0x800bb8e6 0 + 2148251878
1 ??? 0x800c30dc 0 + 2148282588
2 translate 0xb818b69a CallPPCFunctionAtAddressInt + 202826
3 ??? 0x800ec075 0 + 2148450421
4 ??? 0x800ebf32 0 + 2148450098
Thread 2:
0 translate 0xb8152b0b spinlockwrapper + 92383
1 translate 0xb817b5d8 CallPPCFunctionAtAddressInt + 137096
2 translate 0xb80bd6fb 0xb8000000 + 775931
3 translate 0xb80b6b77 0xb8000000 + 748407
4 translate 0xb80d4530 0xb8000000 + 869680
5 translate 0xb813d2cf spinlockwrapper + 4259
Thread 3:
0 translate 0xb8152bc4 spinlockwrapper + 92568
1 translate 0xb817b2ee CallPPCFunctionAtAddressInt + 136350
2 translate 0xb80bd6fb 0xb8000000 + 775931
3 translate 0xb80b6b77 0xb8000000 + 748407
4 translate 0xb80d4530 0xb8000000 + 869680
5 translate 0xb813d2cf spinlockwrapper + 4259
Thread 4:
0 translate 0xb8152803 spinlockwrapper + 91607
1 translate 0xb816e76d CallPPCFunctionAtAddressInt + 84253
2 translate 0xb80bd6fb 0xb8000000 + 775931
3 translate 0xb80b6b77 0xb8000000 + 748407
4 translate 0xb80d4530 0xb8000000 + 869680
5 translate 0xb813c9e9 spinlockwrapper + 1981
Thread 5:
0 translate 0xb815298f spinlockwrapper + 92003
1 translate 0xb8183603 CallPPCFunctionAtAddressInt + 169907
2 translate 0xb8186194 CallPPCFunctionAtAddressInt + 181060
3 translate 0xb80df67b 0xb8000000 + 915067
Thread 6:
0 translate 0xb815298f spinlockwrapper + 92003
1 translate 0xb8183603 CallPPCFunctionAtAddressInt + 169907
2 translate 0xb8186194 CallPPCFunctionAtAddressInt + 181060
3 translate 0xb80df67b 0xb8000000 + 915067
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0xb813cb3c ecx: 0xb7fffa6c edx: 0x801a194a
edi: 0xb81d8794 esi: 0x00000004 ebp: 0xb7fffa98 esp: 0xb7fffa6c
ss: 0x0000001f efl: 0x00000246 eip: 0x801a194a cs: 0x00000007
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0xb8135118
Binary Images:
0xb8000000 - 0xb81d7fe7 translate ??? (???) /usr/libexec/oah/translate
Translated Code Information:
NO CRASH REPORT

I just fixed my own issue, based on a posting I saw in one of the other discussions. I did the same thing, by downloading the standalone update and then installing. After the required restart, everything worked fine!!! It seems like there was definitely a problem with the version that was installed via Software Update.

How do I port my Windows Word, Excel, and Powerpoint files to the MAC? What software is needed on the MAC to use them? Thanks.

How do I port my Windows Word, Excel, and Powerpoint files to the MAC? What software is needed on the MAC to use them? Thanks.

You can certainly use iWork, though I hesitate to recommend it to a seasoned Windows user simply because it would add another level of the unfamiliar with which you would have to gain familiarity. The iWork applications are certainly very competent and in most respects both easy to use and surprisingly powerful. They are not 100% compatible however, though that typically manifests itself in document formatting issues rather than anything more significant.
I have never attempted to import emails from a Windows system into MacOS - other than in Outlook connected to an Exchange server, thus not really an issue at all. I doubt that the Mail app in MacOS can import directly, but of course you could always set the account(s) up on the Mac and then forward emails you want to keep from the PC. Not elegant, but it works. Virtually any Windows document or file, whichever application created it, can be opened or converted for use on a Mac, and using both systems on my desk each day I rarely see any issues switching stuff from one machine to the other. You may stumble over one or two issues, but likely not significant.
In switching platforms there will be some inevitable issues, not so much with being able to import your stuff because there's usually a workaround or a utility that can help, but just with getting familiar with the platform and the differences between Windows and MacOS that can obscure their similarities. From time to time the support community here hears from a user who has found the migration very problematic and regrets it, but for the most part the phrase 'I should have done this years ago...' is rather more prevalent!

View Word and PowerPoint in browser no longer working

Hi There,
I have SharePoint 2010 environment. I configured Word Viewing Service and PowerPoint service accordingly and all working perfectly. But recently it didn't work any more. I deleted services and recreate services, even stop and restart the service from Central
Administration interface didn't make it working. I got same error message as below:
I found some suggestions from Google, and I did check the setting, but I didn't fix the problem.
Regards,
Tony

You must increase the permission on both service applications and then execute an IIS reset. Follow the steps explained in below article and you should get the error resolved.
Fixing Office Web Apps "Network Connectivity has been lost error"
As given in article...
1. Run this script in PowerShell:
Remove-PSSnapin Microsoft.SharePoint.PowerShell -erroraction SilentlyContinue
Add-PSSnapin Microsoft.SharePoint.PowerShell -erroraction SilentlyContinue
Write-Host -ForegroundColor White "--------------------------------------------------------------"
Write-Host -Foregroundcolor green "Fixing Word Viewing Service Application"
$e = Get-SPServiceApplication | where {$_.TypeName.Equals("Word Viewing Service Application")}
$e.WordServerIsSandboxed = $false
Write-Host -Foregroundcolor green "Word Viewing Service Application is fixed"
Write-Host -ForegroundColor White "--------------------------------------------------------------"
Write-Host -Foregroundcolor green "Fixing PowerPoint Service Application"
Get-SPPowerPointServiceApplication | Set-SPPowerPointServiceApplication -EnableSandboxedViewing $false
Get-SPPowerPointServiceApplication | Set-SPPowerPointServiceApplication -EnableSandboxedEditing $false
Write-Host -Foregroundcolor green "PowerPoint Service Application is fixed"
Write-Host -ForegroundColor White "--------------------------------------------------------------"
2. Do an IIS reset on SharePoint Application Server.
Note: Office Web Apps must be installed on a farm which uses a domain controller. For standalone installations this fix will not
work. Before running this script please check the name of “Word Viewing Service Application“
and PowerPoint Service Application because it may differ in your system. You can check it either from central administration site or by running “Get-SPServiceApplication”
command.
Please remember to click 'Mark as Answer'
if the reply answers your query or 'Upvote' if it helps you.

CP5 and PowerPoint not Roundtripping

Similar Messages

Maybe you are looking for