Cp6.. Audio from FLV Slide Video keeps playing
I have a project with several slides in a row that have flv videos with audio. I used the multi-slide/sync video.. not event video to install the video on each slide. Here's the problem:
Say I'm watching /listening to the video on slide 1, when I use the playbar to advance to slide 2, the audio thats attached to the video on slide 1 continues to play, and the video on slide 2 also starts. So, I'm watching the video on slide 2 but hearing the audio from video 1 and video 2. This does not occur when with mp4 videos. I am using a standard playbar. This does not happen in CP5.5 with the same project. Any Ideas?
Hi,
Thanks for your replies.
Nimmy, Yes, I did have transitions applied. Changing to “No Transition” did resolve the issue. This was one of a series of Captivate 5.0 projects I’m updating. I just confirmed that the second one in series had the same issue when updated in Captivate 6. Again, changing to “No Transitions” resolved the issue. I also, opened both of these projects in Captivate 5.5 and republished – the transitions work perfectly in Captivate 5.5.
Vikram, this issue occurred on a Win 7 PC, the videos are not split across separate slides, as reported above, I can duplicate the issue across several projects now. I did try different FLV. I was incorrect in my original post about MP4’s not having the same issue. The project with the MP4 videos did not use transitions. When I applied a transition, the same issue occurred.
This is one of several Captivate 6 issues that’s causing me to reconsider using it. It has several new features I’d like to use but its eating up a ton of time, none of which is billable. I’d suggest that if you can… create/publish any new projects in Captivate 5.5 then open in Captivate 6. If everything works as expected great. Otherwise, you have a fallback position in Captivate 5.
Steve
Similar Messages
-
This might be a silly question but ...
I have a presentation with audio voiceover on every slide and videos on some. I have entered closed captioning for all of them. This is a pretty time consuming job.
What happens if I run into a problem with a video or audio clip and need to replace it? If I delete that audio or video from the slide, what happens to all the closed captioning that you added to it? I'm assuming it's deleted when you delete it from the slide.
If I export the captions before deleting the audio/video file, can I then reimport them when I replace the audio/video file with a fixed version?
Thanks for any clarification.Hi there,
You can have CC with Slide audio and Multi Slide video in Captivate.
If you will delete the slide audio or Multi slide Video, then CC will get disabled on that slide, but same CC text will retain there as Slide notes.
Now, once you will re insert the audio or multi slide video you can mark that slide notes as CC again, or can have new CC.
So, even after deleting the audio and multi slide video, CC will not be deleted.
check following section in Captivate:
Thanks. -
Audio from Flash CS3 Video overlapping
audio from Flash CS3 Video overlapping
help stopping the FLVPlayback instance (which has an instance
name of theVideo) when another button is clicked!
How do I stop flv playback when user clicks a navigation
button ...
Excuse me in advance for asking about a topic that may be
very popular!
I'm using the attached code to go from the main stage to one
subset of .swf files (loaded movies) and I apparently have no
problems with overlapping. Hell, the files even seem to unload
themselves correctly. Then, when I go to my second subset of .swf
files (with the exact same AS3 structure), which has a Flash Video
file (made by the FLV Playback component), I get into an
overlapping problem associated with the audio.
How can I stop, cancel, or unload the audio when the file is
clicked away from (the user selects another button on the main
stage)?
Code attached. Please let me know if anything else is needed.
Yours Sincerely,
JntspecialtyI have tried to clean up code and do this right.
I need help referencing (storing the value in the variable
"stopsoundoverlapReq") the "flvplayback instance AFTER theVideo is
instantiated (ie, the frame that contains theVideo has rendered)"
correctly.
Also, now I need help with the name of my nav bar button's
method followed by parentheses, which should include the
appropriate method parameter.
On my main timeline, I tried to clean up the code and use:
var stopsoundoverlapReq:FLVPlayback =
stop("videopage.swf/MovieClip(ldr.content).theVideo");
Then for my nav bar button on this same timeline use:
any_btn.addEventListener(MouseEvent.CLICK, stopsoundoverlap);
function stopsoundoverlap(event:MouseEvent):void
stopsoundoverlap.stop(stopsoundoverlapReq);
The 3 errors I get now are :
1046: Type was not found or was not a compile-time constant:
FLVPlayback. var stopsoundoverlapReq:FLVPlayback =
stop("videopage.swf/MovieClip(ldr.content).theVideo");
1061: Call to a possibly undefined method stop through a
reference with static type Function.
stopsoundoverlap.stop(stopsoundoverlapReq);
1137: Incorrect number of arguments. Expected no more than 0.
var stopsoundoverlapReq:FLVPlayback =
stop("videopage.swf/MovieClip(ldr.content).theVideo"); -
Bookmarked videos keep playing in the background
--when i bookmark a video from you tube or anywhere else--the video keeps playing in the background--there is no tab--this happens with certain flash sites as well--i remedy the problem by restarting the browser or making a non video bookmark right after---
Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]. Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u '''Use hardware acceleration when available''']. All these settings/options/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme, option or hardware acceleration is causing issues. Disabling/enabling hardware acceleration, and some types of add-ons in normal mode may require a Firefox restart.
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.org/en-US/kb/Options%20window Options] -
Add audio from 25 fps video to 23.976 fps
Hello,
I want to add audio file from 25 fps to match with another video with 23.976 fps using Audition. How can i do that ?!
25 fps video settings:
General
Complete name : 01.avi
Format : AVI
Format/Info : Audio Video Interleave
File size : 170 MiB
Duration : 20mn 28s
Overall bit rate : 1 161 Kbps
Writing application : VirtualDubMod 1.5.10.2 (build 2540/release)
Writing library : VirtualDub build 24415/release
Video
ID : 0
Format : MPEG-4 Visual
Format settings, BVOP : 1
Format settings, QPel : No
Format settings, GMC : No warppoints
Format settings, Matrix : Default (H.263)
Muxing mode : Packed bitstream
Codec ID : DX50
Codec ID/Hint : DivX 5
Duration : 20mn 28s
Bit rate : 1 039 Kbps
Width : 640 pixels
Height : 480 pixels
Display aspect ratio : 4:3
Frame rate : 25.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.135
Stream size : 152 MiB (90%)
Writing library : DivX 6.7.0 (UTC 2007-09-20)
Audio
ID : 1
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 3
Mode : Joint stereo
Mode extension : MS Stereo
Codec ID : 55
Codec ID/Hint : MP3
Duration : 20mn 27s
Bit rate mode : Constant
Bit rate : 112 Kbps
Channel(s) : 2 channels
Sampling rate : 44.1 KHz
Compression mode : Lossy
Delay relative to video : 22ms
Stream size : 16.4 MiB (10%)
Alignment : Split accross interleaves
Interleave, duration : 40 ms (1.00 video frame)
Interleave, preload duration : 500 ms
23.976 fps video settings:
General
Complete name : new_01.avi
Format : AVI
Format/Info : Audio Video Interleave
File size : 557 MiB
Duration : 24mn 7s
Overall bit rate : 3 228 Kbps
Writing library : VirtualDub build 32842/release
Video
ID : 0
Format : MPEG-4 Visual
Format profile : Advanced Simple@L5
Format settings, BVOP : 2
Format settings, QPel : No
Format settings, GMC : No warppoints
Format settings, Matrix : Default (H.263)
Muxing mode : Packed bitstream
Codec ID : XVID
Codec ID/Hint : XviD
Duration : 24mn 7s
Bit rate : 1 807 Kbps
Width : 1 024 pixels
Height : 768 pixels
Display aspect ratio : 4:3
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.096
Stream size : 312 MiB (56%)
Writing library : XviD 64
Audio
ID : 1
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : 1
Duration : 24mn 7s
Bit rate mode : Constant
Bit rate : 1 411.2 Kbps
Channel(s) : 2 channels
Sampling rate : 44.1 KHz
Bit depth : 16 bits
Stream size : 244 MiB (44%)
Alignment : Aligned on interleaves
Interleave, duration : 42 ms (1.00 video frame)
Interleave, preload duration : 500 ms
Best Regards,Thanks SteveG,
Ok, What about add the same audio from 25 fps video to 29.97 fps video with settings below:
General
Complete name : 01.wmv
Format : Windows Media
File size : 259 MiB
Duration : 24mn 8s
Overall bit rate mode : Constant
Overall bit rate : 1 501 Kbps
Maximum Overall bit rate : 1 507 Kbps
Encoded date : UTC 2007-06-25 14:54:25.750
Writing application : TMPGEnc 4.0 XPress Version. 4.0.3.169
Video
ID : 2
Format : VC-1
Format profile : MP@ML
Codec ID : WMV3
Codec ID/Info : Windows Media Video 9
Codec ID/Hint : WMV3
Description of the codec : Windows Media Video 9 - Professional
Duration : 24mn 8s
Bit rate mode : Constant
Bit rate : 1 300 Kbps
Width : 640 pixels
Height : 480 pixels
Display aspect ratio : 4:3
Frame rate : 29.970 fps
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.141
Stream size : 224 MiB (87%)
Language : Japanese
Audio
ID : 1
Format : WMA
Format version : Version 2
Codec ID : 161
Codec ID/Info : Windows Media Audio
Description of the codec : Windows Media Audio 9.1 - 192 kbps, 48 kHz, stereo 1-pass CBR
Duration : 24mn 8s
Bit rate mode : Constant
Bit rate : 192 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 33.1 MiB (13%)
Language : Japanese -
I Want To Transmit Audio from Mic and Video from WebCam on Another Computer. I have used AVTransmit2.java file and AVReceive2.java file for Transmission and Receiving but They Transmit Only Video On Another Computer on a network without any error. Any One Help me How Can i Transmit both Audio & Video at the Same time ????????
i m using This Command for Transmittion
java AVTransmit2 vfw://0 192.168.0.1 192.168.0.2 10000
and this Command For Receiving
java AVReceive2 192.168.0.1/10000 192.168.0.2/ 10002Excuse me foro my bad English but I speak English like Tarzan.
To trasmit both video and audio I created a MergingDataSource wich incorporates video and audio data sources. Then I created a Processor with this DataSource and a RTPManager for each track of the processor. It works.
Stupendoman -
How do I route audio from a YouTube video to AU Lab using SoundFlower so that I can capture the YouTube video's sound stream?
Attach camera via USB or put card in card reader.
Go to FCP, and go to the Log and TRANSFER window.
If FCP recognizes the card, you will see your clips listed on the left.
You can view them, set Ins and Outs, and import just what you want.
Once you choose a section of video and import it, FCP converts (transcodes) from its original camera format to Apple ProRes422 - a more edit friendly video file. -
How do you convert the audio from a mpeg4 video file to mp3?
How do you convert the audio from a mpeg4 video file to mp3 format?
Probably the easiest way to do this is to download a free media convertor. Most will be able to convert video into audio files.
-
Audio from inserted video keeps playing on next slide
Hello,
I'm experimenting with Adobe Presenter 6. I have inserted a
video clip into a slide. There is a stop action on frame1 with a
button that advances to frame2. The video has audio, which
unfortunately keeps playing if I advance to the next slide. If I go
once slide further ahead, the audio from the video stops. Has
anyone else encountered this problem? It's driving me crazy!
Thanks!Hi Doc!
I actually ran into the same situation...not with a video
clip, but with a basic flash animation that had audio in it. I'm
not suggesting that the following will definitely work for you, but
it might be worth taking a look at:
Any audio that's set to "Event" while editing in Flash will
continue to "stream" , even while navigating between slides. In
most cases that I've seen (from my experience), audio will stop if
the offending slide is placed immediately before a question slide.
I realize that might not be practical in every case, so....
1. Make sure that audio sync settings in flash are set to
"Stream". What this does is effectively kill off any audio once you
navigate away from the slide that has the embedded flash on it.
2. you can always add a stopAllSounds(); method in flash, but
that's not highly recommended
UNLESS your content slide (with the offending flash object )
comes immediately before, or within a range of question slides.
Again, this too might not be entirely practical based on what
you're trying to do.
I realize that might not help, but as I said, it might be
worth taking a look at how you're incorporating your video.
Rob -
Audio from flv player won't stop playing
Hi, I have a swf loading in another swf that has a video player in it. When I remove the swf from the stage, the swf goes away but the audio from the swf keeps playing. Is there a way to tell that swf to stop playing from the parent swf?
I have a document class referencing a class that contains the video player. The reference for the class is called vPlayer and the reference to the actual component in vPlayer is myPlayer.
This is the code in my Document class that calls vPlayer:
if (window_mc.contains(thumbContainer_mc)) {
window_mc.removeChild(thumbContainer_mc);
next_btn.visible = false;
vPlayer=new videoPlayer;
vPlayer.x = (window_mc.x + 60);
vPlayer.y = (window_mc.y);
window_mc.addChild(vPlayer);
and this is the code in the vPlayer class that calls the FLV component:
public function makePlayer():void{
myPlayer = new FLVPlayback();
myPlayer.skin = "SkinOverPlaySeekMute.swf";
myPlayer.skinBackgroundColor = 0x70A16C;
myPlayer.skinBackgroundAlpha = 0.5;
myPlayer.skinAutoHide = true;
myPlayer.x = video_x;
myPlayer.y = video_y;
myPlayer.width = 550;
myPlayer.height = 309;
main_container.addChild(myPlayer);
myPlayer.source = myVideos[0]. @ URL; -
No audio from mpg1 muxed videos
After upgrading to 7.1.6, all of a sudden I can't hear the mpg 1 muxed audio from within Quicktime Pro. I know I can't edit, etc. until I have converted, but I just plain can't hear the audio when played in Quicktime. I played the same video on another computer with the upgrade and it works fine. Any ideas?
Thanks.Thanks for the reply. My Audio Midi Setup Output is grayed out with a message that Output is not supported. Since I use Soundtrack pro and Peak for my audio editing, etc. I uninstalled Garage Band.
Also, every previous mpg1 that I know played with audio, does not now play the audio, only video. It's not only one. I gave one of the files to a colleague and it plays just fine on his exact same laptop. Other than he doesn't use Quicktime Pro. ????
All of a sudden something is keeping Quicktime from playing the audio on all muxed mpg1 files.
Thanks again for ANY help. -
Video keeps playing in hidden div tag - how to stop it?
Hi,
I have a problem with a vimeo video in a hidden div tag. The div tag named #movie starts out to be hidden till a menu is clicked and it becomes visible, and the vimeo video can be started. The problem is when the #movie becomes hiddan again and the movie keeps playing and you can hear the noise from the movie.
Is there any way to tell the vimeo movie / content of #movie to stop or reload when it becomes hidden?
Thanks in advance!
AnnaSee similar thread here
Flash video still plays when div is hidden
http://forums.adobe.com/message/3847276 -
Can I save the audio from a MP4 video as an MP3
HI all
OK over the week end I needed to record some audio, all I had was my N70.
I went to the voice recorder and found I could only record 1 minuet so I went to my video camera and found I could get an hours worth.
well now I have 53 minuets of video as MP4 and need the audio only preferably as an MP3 file...
Can any one help me achieve this ?
N96-1 + 8G SD~Software Version 30.033~Software Version Date 18-06-09~Type RM-247~P/C 0543713~T Mobile UKThere are several sw applications for the PC you can use to get the audio from the video file.
You can use an encoder like www.imtoo.com 3gp encoder.
You could use SUPER (freeware video encoder)
Lastly if you have an audio recorder app in your pc you could just play the video and record the audio in your recorder application.
There are just many ways to do this.
640K Should be enough for everybody
El_Loco Nokia Video Blog -
X-FI record audio from internal dvd video prob
I have an X-FI Platinum.
When I try to record audio from the internal dvd dri've when playing a video, the recording skips and changes speed, anyone else noticed thi ?. It's the same whether trying to record from the audio console or another application.
This is in audio creation mode
thanks
EricGo to this thread and follow the instructions to get the drivers/install disc for your pci soundcard:
http://forums.creative.com/creativel...hread.id=25677
Good luck!? -
Can you extract the audio from a music video?
Some of my favorite songs were purchased from Itunes as music videos. (Because they are also my favorite videos.) Now I'm trying to figure out how to move those songs to the iPod +without having to buy the songs as just songs!+ It's been very frustrating. "Create iPod or iPhone version" doesn't convert to anything useful for a Shuffle. How do I extract the audio from the video?
Or do I have to buy the same music over again?Hello RoyFeni,
And welcome to Apple Discussions!
Can you change the music video's *Media Type* to Music from under the Options tab of the *Get Info* window for the track in iTunes?
I'm not sure if you can, but hey its at least worth a try. It's all I have though.
Otherwise, this is not possible via iTunes. The only way you would be able to extract the audio is through the help of some third party application. Not sure how simple or complicated the process is.
B-rock
Maybe you are looking for
-
Buttons on winxp are not displayed correctly
Hi, I was just testing around with AWT and SWT and noticed that the Button component is not displayed in xp style but in the old win2k style. why? and Is it possible to change this behavior? thanks
-
Bridge cs4 opens when I click on bridge cs6
It worked for the first day but sence then I get sc4 bridge?
-
Having 2 Views in WDA, can I call the non-default View by itself?
I am developing a web dynpro that has 2 Views in 1 Window. View 1 is a selection screen with 2 parameters - Project Number & Project Manager View 2 is an Adobe Form which displays project info selected from what the user entered on V1. I created a We
-
Best practice for scripts in UCCX
General Question When I wrote scripts for Nortel Symposium , I always created a primary script for queuing calls to skill sets so that the press 1 , welcome prompts, check day of week etc were all in different scripts but the core function- Select Re
-
we used to only need to enter a password to login, but we need to enter user name too now. how can we only enter password?