Cp6 - effects (how to fade in from top to bottom?)
Hello all,
I am attempting to simulate an effect I often used in Lectora. I used this effect on text bullets where the text would slowly appear (fade in) one line at a time from top to bottom.
Is there a similar effect in Captivate 6. I gave up looking for it.
Also, has anyone bothered to catalog and demonstrate all the effects available in Captivate 6? If not, perhaps I will take on this project next month.... seems worthwhile.
Thank you,
Shawn
Thank you for your response Lieve.
Lilybiri wrote:
Please: http://lilybiri.posterous.com/list-with-effects-in-captivate-555-thank s-col
They didn't change in CP6
You have to make each line a separate Text container (caption or smart shape) and apply the effect on each line, stagger them on the timeline
Lilybiri
The list is great...
I suspected that was the only way. That is far too much work for all the bullets that I would like to animate. I'll have to do without.
But I appreciate your post.
Similar Messages
-
How to auto scroll from top to bottom on JTable ?
HI All.
At the current, I use JTable is contained JScrollPane. Now, I want Jtable auto scroll from first item to bottom and when JTable scroll to bottom then Jtable will scroll bottom to top, It is loop. Who know how do this function, please help me.Thanks for reply
Actually. I was code -> scroll from top to bottom on JTable. Code below But when JTable auto scroll then screen is not smooth.
Please help How to workground for this problem
private void scrollTopToBottom() {
try {
JViewport viewport = flexGrid.getViewport();
int heightViewport = viewport.getViewSize().height;
while(moveY < heightViewport) {
synchronized (this) {
while (suspended)
this.wait();
if (stopped)
break;
moveY += 10;
if(moveY > heightViewport) {
moveY = heightViewport;
viewport.setViewPosition(new Point(0, moveY));
try {
Thread.sleep(500);
} catch (InterruptedException e1) {
e1.printStackTrace();
viewport.updateUI();
} catch (InterruptedException e) {
} -
Monitor fades grey from top to bottom and must restart
Over the past two weeks my Mac has been acting up. I will be working in CS2 and while searching for a file to open through one of the apps my monitor fades to grey. It starts top to bottom like a slide. I can still see my open windows, but they are behind this grey window and then a message comes up in four different languages saying that I must restart by holding down the power bottom. What is going on? I have not downloaded anything recently. Do I have a virus? HELP!
Launch --
Welcome!
You're having a kernel panic.
It is often hardware related,
so after you've read the articles I've linked below,
start by unplugging all your peripherals except the keyboard & mouse and start testing.
Bad RAM can also cause these.
You should get it taken care of ASAP.
http://docs.info.apple.com/article.html?artnum=106227
Also this one from the x-lab:
http://www.thexlab.com/faqs/kernelpanics.html
Message was edited by: ~Bee -
i'm creating a menu in Motion and the menu will run 60 seconds in that time a want an object thats in my menu to fade from full opacity to nothing, sounds easy but i want this to fade out from top to bottom over 60 seconds. I understand the keyframe side of it but trying to figure out how to fade from top to bottom.Thanks
Create a gradient that is white to white. Put a ramp parameter behavior on th color at one end to fade it down to black. Add another ramp behavior for the other color only have it start half way thru your timeline. Then use that gradient as a luminance mask.
Patrick -
Hi, Can anyone help me? I need too know how to move pictures around in lightroom., Such as moving 1 from top to bottom or in the middle to the bottom?
If you create Collections in Lightroom, you can simply drag the photo to wherever you want it to be within the Collection.
-
I am having a problem with my brand new MacBook Pro. After opening my laptop the other day I noticed a straight green line from top to bottom near the center of the screen. What is this from and how do I get rid of it? It is most annoying. Please Help!
"What is this from and how do I get rid of it?"
Such symptoms bode serious hardware issues and you shouldn't think about fixing it yourself when you are still in waranty. Get to an Apple Store, like the other poster suggests. -
How do i switch from top sites view to normal view
how do i switch from top sites view to normal view
Visit the site you want it to be the Homepage.
Safari > Preferences > General
Homepage:
Click the "Set to Current Page" button.
New windows open with:
Click the popup menu box and select "Homepage"
New tabs open with:
Click the popup menu box and select "Homepage"
http://support.apple.com/kb/PH11857 -
Intencity Chart - how to change scan mode from top to bottom
Hello,
I need update my Intencity Chart from top to bottom.
Please tell me, can I do this?
Thank you.
With best Regards,
Dmitry.Dmitry,
This link is the LabVIEW help for the Intensity Chart Properties Dialog Box. As you can see under Appearance > Update Mode there are three update options. All three options are left/right viewing.
This link is the LabVIEW help for the Update Mode Property, which gives more information about the property.
These two links give you the information on how to choose one of the three methods to update your Intensity Chart.
David A.
National Instruments
Applications Engineer -
I have an imac, intel 2 duo. OS 10.6.8. Suddenly my desktop is showing two thin lines running from top to bottom, each about 2" from either side. How can I get rid ofthem?
That's strange...
Resetting PRAM might help: http://docs.info.apple.com/article.html?artnum=2238
If that doesn't help, I'd recommend contacting AppleCare.
it seem to be lcd problem -
My Mac has blue screened a couple of times this week it started to work a couple of times after that but now it is grey screening with inch wide blue lines from top to bottom the apple logo is also there it is trying to boot up again but won't. Not sure don't know anything about how to fix things but I suspect the fan has stopped working as I can't hear one. The problem I have I now live in Turkey and I am 1000 km from the nearest apple shop which is in Istanbul I believe and I now live in Didim, Altinkum I don't trust the everyday Turkish shop to take it to as they will tell you they know how to fix it but will probably make it worse, typical in Turkey. Please can someone help as we use it for our business and obviously I need it up and running ASAP I am using IPad and iPhone at moment but can't access my files which are on PC.
Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?! -
I'm VERY happy with the results (fast!). However, the really strange thing is this - there is now a thin yellow line, way over on the right side of the screen, which goes from top to bottom, and stays there no matter where I go or what I do. I've never seen anything like this! It was not there before I did the upgrades. Anyone out there ever heard of such a preposterous thing ~ or have any ideas on how to get rid of it?
Hello Mark,
It's going to mean a lot of reading but you should study the 'More like this' legend to your post's immediate right. >>>>>>>> plus some of the links within each.
The problem is well explored with much guidance on what to do and where to go. -
Scrolling is very slow and looks like it's re-rendering from top to bottom on each scroll.
After downloading Firefox 4, scrolling isn't work well. Each time I scroll up or down, the page looks like it's re-rendering by wiping from top to bottom. Takes about 2 seconds to so before I can scroll any further. There's no smoothness to scrolling like there was in the past.
I tried downloading new graphics drivers, but that didin't fix the issue. I tried checking "smooth scrolling" in advanced options, but that made it worse.Update the video display driver to the latest version.
* https://support.mozilla.com/kb/How-do-I-upgrade-my-graphics-drivers
Try to disable hardware acceleration in Firefox 4.0:
* Tools > Options > Advanced : General: Browsing: [ ] "Use hardware acceleration when available" -
M40-237: small lines from top to bottom on the screen
I have installed DirectX 9c Feb 2006.
When I'm Trying to play a game , in the center of the screen there are small horz. lines from top to bottom.
How can I solve this problem ?
Thanxs.Hi
Before you try to solve it you must find out why this happen. As far as I know this unit is delivered with DirectX V9.0C. Did you have this problem before latest DirectX installation?
Are those lines there just when you start the game or all the time? -
White space connected from top to bottom
I have a white space from top to bottom, but it does not reach the bottom at the Iphone-view. How can I fix this, I want the white space always form top to bottom.
www.doormode.nlOK that makes more sense. Vertical sounded like the 11" direction and it is hard to imagine a defect that would cause a repeating issue in that direction.
For this case I would suggest the troubleshooting steps shown here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
X220 dead pixels from top to bottom
I have had my X220 Tablet for 18 months (purchased November 2011), my one year warranty expired (received no notification it was going to expire back in Nov 2012) but had no problems at all during these 18 months.
Now, I just turned it on today (July 3rd, 2013) and had a vertical blu-green line from top to bottom at 18.5mm from the left side of the screen. I figure a whole line of pixels of one color (red) had gone off, so it is not a single pixel, it is a whole line.
I use this convertible tablet about 20% of my time, my workhorse is provided by my workplace (a Dell convertible tablet). So I was surprised that with so little use the screen has gone bad so soon, and just six months after warranty has expired, and it seems it may get worse.
I also thought when I purchased it that the screen was LED, then found that it is a LCD with a LED backlight.
Is the only solution to replace the IPS screen (it's has a multitouch panel)? or is there a software or BIOS solution?
And if the solution is the replacemente, approximately how much the replacement screen costs?
Any help, suggestions are appreciated.
AzaelBWelcome to the forum!
The LCD panel will have to be replaced, I'm sorry to say.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.
Maybe you are looking for
-
KT4AV will not boot with SATA card installed and no SATA drive
I put a Promise brand SATA II card in a KT4AV motherboard. There is an IDE drive and a DVD drive hooked up to the IDE1 port on the motherboard. That IDE drive has Windows XP Pro SP2 loaded on it. If I have a SATA drive plugged into the card, the mach
-
I am trying to update to iOS5 on my iPad 2, but after the download completes, and file processing starts, I get an error message "There was a problem downloading the software ... the network connection timed out." Diagnostic tests check out OK. Any
-
Hi all. We have configure a JDI server. But when we are using NWDS to connect that server, and create a new DC, it returns us the error. Invalid name; on this server no name of category SAP_DevelopmentComponentName are allowed at all. Whats the probl
-
URLConnection Posting Large DataFiles
I am looking for a way to STREAM large data files, say 100MB+ and the HEAP size is say only 32MB. I believe I should be able to simply do what the code shows below..but.. The AcmeUtils.copyStream method simply conks out with java.lang.outOfMemoryErro
-
When we print an PDF file online, it prints out as garbage or jumbled text for several pages. We have Windows XP and we have a HP Office Jet ProL7680 printer. We have 2 computers and share the printer. I think the issue is Adobe, but how do I corre