CP7 Interaction not working in HTML5

I'm using the Tabs interaction in CP7 to present information. It works perfectly in web preview, but not in HTML5.
I created a new one, and it works OK in HTML5, but it has 4 tabs and I only need three.
I can't see where to remove the 4th tab, though I apparently did it before (and don't remember how). I'm wondering if removing it was what messed up the widget in HTML5.
Does anyone have any ideas?

Hi there
Yeah, sometimes these beasties aren't all that intuitive. Try double-clicking the tab label area. It may require lots of double-clicking. You will finally get into a mode where you may change the label. Once you are there, you should see a circle with a minus symbol. Click that and the tab should be removed.
Cheers... Rick

Similar Messages

Next button in Review Quiz not working in HTML5.

Hey folks,
We've created a course in CP7 and when I take the course on a Computer (SWF) everthing works fine, but when I take the course on an iPad (HTML5), and go into the Review Quiz section, the Next button is not working. When I click it you can see the click animation of the button being pressed, but it doesn't progress to the next question. I'm forced to close the window as there is no other navigational options, but when I do that and re-open the course, it takes me back to the beginning of the course like I haven't even attempted the course.
I've searched for a previous instance of this and I couldn't find anything, so I was hoping someone has either run into this issue before or might have a suggestion on how to resolve it. Any help would be much appreciated.

Hello,
Welcome to Adobe Forums.
Need more information about this issue :
1) Does it happen on a specific project or with a sample project as well (2 or 3 question slides) ?
2) Which iPAD are you using and what is the iOS version ?
Make sure you have CP 7.0.1 update installed (Launch CP7 -> Click on Help -> About Captivate)
Thanks,
Vikram
Adoeb Support

Captivate 6 A3C Widget not working on HTML5

Does this work with HTML5? When I publish a project and try to access the HTML 5 page, I get a loading screen that just hangs forever. Any ideas?

If you leave Auto Label turned on, you don't have full control over what the reader will call out. It will just use whatever the Item Name of the text box is and whatever the text happens to be on the caption.
Captivate's HELP topic gives more info:
http://help.adobe.com/en_US/captivate/cp/using/WSc1b83f70210cd101-157ec7f211c7ef6052c-7fff .html#WSc1b83f70210cd101-e25316911ca392d29c-8000
So if you want the reader to say something more helpful to the user, you need to take control, turn off Auto Label and manually copy or type the text for the reader to consume.
As far as JAWS goes, note this info in the HELP topic:
Accessibility in Adobe Captivate demos works better when all the slides have interactive content. If you are using JAWS 6.1 or later, be aware that JAWS sometimes does not clear the Microsoft Active Accessibility (MSAA) tree. As a result, the content of previous slides can replay when slides are continuous. This problem does not occur in JAWS 4.5.
It's a bit worrying that the version of JAWS mentioned in the HELP appears to be 10 versions behind the one you are using. How often does anyone update these HELP topics??

Navigate Value Interaction not working with UNIONs displayed as pivot

hi all - If created dozens of requests the uses drilling. Now I'm getting strange behavior in a certain scenario...
I have a request that is a pivot view and contains UNIONs. One of the columns, employee name, is set up as 'Navigate' for the Value Interaction property. The request drilled to has employee name set up as 'Is Prompted' in the criteria.
If the main request is displayed as a table view, the drilling works fine - the drilled to request opens with the intended employee that was clicked on in the main request. However, if the main request is a pivot view (which is the view I want) instead of a table view, the drilling does not work as intented - the drilled to request opens with all the employee names. I just want to drill on the clicked upon employee, not all the employees.
I'm using OBIEE 10.1.3.4.
Any suggestions as to why this would work as a table view but not as a pivot view?
Thanks!

The best solution is to define hyperlink for the detail report in the report column itself. Change the expression of column to HTML hyperlink. (Make sure value interaction is disabled) Use Go URL syntax to navigate to detail report and pass parameter, something like below:
<pre>'<a href=”saw.dll?Go&Path=/Shared/ReportName&Action=Navigate&P0=1&P1=eq&P2=Emp.Name&P3=’ || Emp.Name || ‘">’ || Emp.Name || ‘</a>’</pre>
This link has more details:
http://www.iwarelogic.com/2010/09/integrating-oracle-obiee-content-using-go-url-850/
http://www.iwarelogic.com/wp-content/uploads/blogimg/2010/09/image006.jpg
Hope this helps

Learning Interactions not working in Chrome

This is my first time using Captivate (8.01). My problem is that 3 widgets/learning interactions are not working when viewed in Chrome. It is a responsive project. They work fine in Safari.
Would greatly appreciate any information about how I can fix this. Thanks.

Yes. Jeopardy, Process Circle and Millionaire. I did find out (through a nice, long -and helpful -chat with Adobe support) that these interactions will work on the Chrome browser when accessed from an LMS. I needed to send them out to reviewers because I didn't have access to an LMS. I just defaulted and asked them to use a different browser.
Thanks for replying and offering to help.

Captivate 7 | Dragdrop interactive not working on Tablets

Hello,
I have created a Drag and drop interactivity seeking the help from online Captivate 7 turtorials. Published the file to HTML 5 output. Cheking on the iPad the interactivity is not working.
Is that "Drag and Drop" interactivity not supported on Tablets?
Regards
Chandru

This is the Elements forum. Try copying your question again here:
https://forums.adobe.com/community/adobe_captivate

Captivate 8 drag and drop interaction not working

Hi, I am working with Captivate 8 and created a drag and drop interaction using the drag and drop wizard. For some reason when I preview the interaction some of my drag sources work and others do not. I have searched high and low for what I may be doing wrong but I can't figure it out. I created types when making the interaction so it doesn't make sense that some should work and others do not. Thank you for any help you can provide.

Ok, so I inserted the screen shots below. I realize the items are overlapping in the wiring. I did change that and try it but it still didn't work. Maybe I need to completely rebuild it? I created types so that 9 would go to one target and 6 to the other.Thank you so much for your quick help on all of this.

Interactions not working in Captivate 7

I have purchased Captivate 7. There are supposed to be "interactions". When I go to ->Insert ->Interactions a blank popup window appears. When I start clicking around in that window a few interactions appear, but not he entire list. I need to access "web interaction" so as to import html into a Captivate project. If I click on any of the interactions and click "insert" I get popup saying "not a valid widget". I was told that these interactions are available "out of the box" for Captivate 7. Any ideas of how I can get this to work?

After you launch Captivate and create/open a project, please wait for sometime (maximum a couple of minutes) and then launch Interaction dialog.
If it still doesn't work then You may also try to recreate your preferences.Delete or rename the Captivate 7 folder from the location mentioned below.
Windows Vista and Windows 7: C:\Users\[user name]\AppData\Local\Adobe\Adobe Captivate 7
Windows XP: C:\Documents and Settings\[user name]\Local Settings\Application Data\Adobe\Adobe Captivate 7
Mac: /Users/[user name]/Library/Preferences/Adobe Captivate 7
Regards,
Rajeev.

Spry validation not working on HTML5 page in IE9

I have a HTML5 / CSS3 data capture site here: http://shapewearpanel.co.uk/
On the textfield input towards the bottom of the page I have a SPRY validation applied to prevent entry of more than 250 characters and to count down the characters as they are typed.
This works fine in all browsers except IE7 and IE9. I'm not to worried about IE7 but I am concerned about IE9.
The exceed 250 characters validation doesn't work, the block doesn't work and the countdown only triggers on blur and submit rather than change (which defeats the object really).
The page defaults to IE9 compatibility / IE7 on my standards lists in developer tools and this works OK but doesn't implement CSS3 so I loose my rounded corners which I can put up with but it would be nice if SPRY worked across all modern browsers otherwise there is no point in using it.
Does anybody know any fixes for this problem, has anyone else experienced it?

Have you tried adding <meta http-equiv="X-UA-Compatible" content="IE=8" />?
Gramps

Autostart does not work in html5

Autoplay doesn´t work when I upload my multiple choice quiz as html5. The browser (Google Chrome) gives me a sad white window with a Play-arrow in the center. But I want my own slifde to start imediately. When I say No to preloader and yes to Autostart nothing changes. The problem is not there when I say prewiew in Browser, only when I say preview (or upload) as html5. Any solutions?

If you follow this post:
http://forums.adobe.com/message/4587553#4587553
#5 gives some advice on how to do it but I never verified it. If you go down to post #7, I gave some advise on how to at least make it look like your slide and more like it was supposed to be there.
HTH
Dave

URL interaction not working in Catalyst CS5

I am using Flash Catalyst to create some tabbed navigation images. All the functions work perfectly except for one tab that is suppose to link to a product page from my company's website. I have copied the exact URL into the interaction pull-down in the program, but when I run the project that link take me to the website but doesn't display the product. It gives me the error message "This page cannot be displayed. A problem occurred loading this page.". I know the URL works outside of Catalyst if I just paste it into the bar and hit go. Why is this happening and what do I need to do to fix the issue? Any help is welcome, but be aware that I am code illiterate. Thanks!

Yeah had this problem before, use the java.net.URLEncoder class:
<%@ page language="java" import="java.net.URLEncoder"%>
<%
String url = "http://194.216.8.238:8081/merchant/merch.merchant?msgid=RP&mctid=1111242&totcp=15
&mname=Jason Perry&mtxnid=UY675432"
String encodedUrl = URLEncoder.encode(url);
response.sendRedirect(encodedUrl);
%>

Draggable interaction not working on android

I'm using Jquery UI draggable in a project of mine, a cross-platform app.
The draggable part works on iOS and Android - the element can be dragged, though it seems to be more offset the farther I drag it.
However, the draggable element's position should trigger a hide/show action on another object along with an audio event. This works fine on iOS but not on Android.
My code is as follows:
//Make element draggable
sym.$("MOWER").draggable({ containment: "parent", axis: "x" });
//Draggable element affects other element and plays sound
sym.$("MOWER").touchmove(function(e) {
m=1;
      if($(e.target).position().left>284){
          sym.$("MOOSHI_BACK").show();
          sym.$("MOOSHI_FWD").hide();
          playPGAudio(getPGPath() + "media/SFX_MooshiBark.mp3");
      }else{
          sym.$("MOOSHI_BACK").hide();
          sym.$("MOOSHI_FWD").show();
Both parts of the code are in compositionReady. This is necessary because of the audio, if I attach the play audio script to the element itself it won't play.
However, I have tried the script on the element as well but I get the same result, it drags but doesn't trigger the hide/show
Thanks in advance for your help...
Justin

Sections are not supported on Android. I'll make that clearer in the documentation. Here's the only place it's mentioned:
http://helpx.adobe.com/digital-publishing-suite/help/supported-feature-list.html

Captivate 7 "Notes" interaction not working properly

When viewing project on an ipad, whenever the Notes widget is included on a slide, all the click boxes, URL links etc. on the slide are disabled until the Notes icon has been opened and closed. Any suggestions on how to fix this?
Also, any notes typed into the Notes widget disappear once you click "hide notes" - this happens in Chrome, IE and Firefox. The only way of getting the text to be retained is to leave the Note open and visible on the slide before advancing. This then seems to result in multiple notes being created. Are there any plans to improve the Notes interaction? This would be a really useful feature but it is currently too buggy to be used safely.

Hi Aslib,
The notes widget needs to be included only once in a project. You do not have to place in on every slide.
Place the widget on the first slide of the project and set the Timing to - 'Rest of Project' under the timing panel in Captivate. This allows the widget to be used for the entire project.
There are 2 settings which you can use for the notes widget which will allow you to have either slide based notes or project based notes.
- Slide based notes - allows you to take notes for each individual slide and add notes to each slide separately. (This is the default setting).
- Project based notes - allows you to have one note which will be displayed for the entire project.
Using Project based notes should cater to your current need.
Hope this helps.

OnClick interaction not working

I have such a silly question. I am just learning Catalyst and can't get navigation button to work when I run project
It will run in timeline and transition to page2 - also interaction shows OnClick to page2
but when I run project in browser NOTHING happens. what have I done wrong?

I would check that the interaction is applied to the button in page1. Playing the transition in the timeline will only show what will happen for the state to state transition. You might want to remove that button and start over.
Feel free to post the FXP to the forum if you would like someone to look at it.
There are some great books and training videos available if you want to learn more about Flash Catalyst.
Chris

You Tube interaction not working.

Whe I go to test my youtube interaction by pressing F12, all I get on the screen is just a moment of the video, like it loading then it goes away... Any thoughts?
Heather Jo Cutting

Do you have the output folder set up as a trusted location in Flash Global Security?
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/how-to-set-up-flash-global -security

CP7 Interaction not working in HTML5

Similar Messages

Maybe you are looking for