CP7 quizzes with multiple question banks not working

Hello there
I have worked 2 weeks on creating a quiz to be published in HTML5 and now that I am finally ready to publish it appears that CP7 has a problem when publishing a quiz with all random questions taken from more than 4 question pools.
Up to 3 question pools HTML5 works like a charm but add a 4th one and it all goes to hell.
I have 60 questions taken from 11 question pools and many questions appear blank (just the background appears and the slide keeps going for its 3 seconds untill it automatically jumps to the next question not giving the possibility to answer and therefore scoring it negatively. (the answer all questions is active).
Now if I publish the same project as SWF the quiz has no problems and works just fine but I would really like to be able to have people take the quiz on their iPad and also I was actually going to convert it into an iPad app but that now appears impossible to do.
Is there a solution to the problem? Is CP7 limited to 3 Question Pools when publishing as HTML5?
As usual thanks in advance

Hi there,
During HTML5 publish, are you getting a warning with the text ' There are more random question slides than questions available in the pool...’. If yes, then can you please take the corrective action and see it resolves the issue or not?
In case if you are facing this issue with proper number of question, random question slides, then please share the .cptx file with us so that we can investigate the issue at our end. Please upload it to a shared workspace (Acrobat.com) and send me the link to [email protected]
Thanks,
Nimmy Sukumaran.

Similar Messages

Multiple Quizzes with multiple results (in Captivate 6)

Hey guys, Thanks for reading!
Does anyone know if it is possible to do multiple tests with multiple results in captivate 6? or if it is possible to have a pre-test with a quiz, and have separate results for each?
I've been having a play with captivate 6 and when I put a quiz in, it overrides the results slide for my pre-test.
Looking at the results slide master properties I can choose to have results for one of my quizzes but not both (even on separate slides):
It wont even let me insert another slide based on the other result.
I would like to know if multiple quizzes with multiple results is possible in Captivate 6?, or if I am simply doing something wrong?
Thanks!

Sorry for way-late reply...
It's really more how your LMS handles 'courses' and the terminology it uses.
Essentially, most often, a 'SCORM Package' (SCO) is a 'course'. I'd rather call each SCO a 'lesson' as, to me, 'courses' should be setup in the LMS with a series of 'Lessons'.
Regardless of the terminology, each 'SCO' is launched by the LMS and one score can be recorded for it via SCORM.
So if you need multiple final scores recorded, each of those final scores need to be in their own SCO.
A common approach is a Pre-Test SCO (or 'lesson', or 'course', whatever term), a 'Content' SCO perhaps with some interspersed scored interactions, and a Post-Test SCO...all three merged together as a 'course' (or whatever term) within the LMS.
That said, as said, it really all depends on how your LMS handles various SCOs...
Clear as mud?
E

Anybody know why internet banking not working on ipad2

Any body know why net banking not working on ipad2

I only know Mac has an issue with Fire Fox
Chel x

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

My iphone 3gs with version 4.0 not works for apple TV should i need to download any app or any other thng

my iphone 3gs with version 4.0 not works for apple TV what should i do?

Welcome to the Apple community.
You should update your iPhone software.

Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything possible

Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything what I could find in the interenet as solution??????

IPhone 4s, iOS 7.1.1: iphone can't connect to wahoo HR BT4.0 sensor :((( Wverything worked fine with iOS 6 !!!

Hyperlink with tracking applied does not work in PDF

We use lots of web addresses in our advertising and generally the web addresses automatically convert to hyperlinks when we distill the files and make PDFs. Recently we've had two instances where someone applied tracking or justification to the line of text containing the url to make it spread across the page. When we make our PDF the url is not clickable. Is there anyway around this? We tried actually creating a hyperlink manually in InDesign by using the Hyperlinks panel and entering the address, but that didn't work either.

Peter,
We'll look into that. We already do two separate PDFs for print and web, but
we are distilling both right now. Wouldn't be too much of a problem to
change to exporting the web version I don't think.
I did a test, just curious, is there a way to keep it from putting a black
box around the link on the PDF?
Thanks for your help! We appreciate it!
Beth
From: Peter Spier <[email protected]>
Reply-To: <[email protected]>
Date: Fri, 14 May 2010 13:24:04 -0600
To: Beth Phillips <[email protected]>
Subject: Hyperlink with tracking applied does not work in PDF
Distilled PDF uses Postscript which does not support hyperlinks and
interactivity. To make your hyperlinks in ID you'll need to export and check
the Include Hyperlinks and Include Interactiviity boxes.
Your printer doesn't need hyperlinks because they don't work on a printed
page. The requirements for print and interactive PDF are quite different, and
you may find you need to make two versions.
>

XI ALERTS with out BPM Are not working.

Hi All,
We are on XI 3.0 sp14. Alerts with out BPM are not working. I want to apply notes 906044, 876546. It says i need to make some changes to the following functions. I could not able to find these Function modules in the first place. Can some one help me out?
<b>Note -
Object -
Name</b>
906044 -
function---- SXMS_ALERT_ERROR_RECEIVE
906044 -
function --- SXMS_ALERT_ERROR_SEND
906044&876546--method ---CL_XI_ALERT HAS_ACTIVE_RULE
906044 -
method -
CL_XI_ALERT_UTIL GET_MDT_URL
905896 -
method -
CL_XI_ALERT CREATE_ALERT
Thank you
Ganges Leaves.

Ganges
Login into XI Developement and give SE37 Transaction. Then you give SXMS_ALERT_ERROR_RECEIVE and click 'display'.
Then you check for the methods CL_XI_ALERT HAS_ACTIVE_RULE, CL_XI_ALERT_UTIL GET_MDT_URL, CL_XI_ALERT CREATE_ALERT and make the changes according to service notes. If you dont find this methods in this function then you can try in SXMS_ALERT_ERROR_SEND.
Regards,
---Mohan

HT204065 Group text with one non iPhone not working on iPhone 6 in the group.

Group text with one non iPhone not working on one iPhone 6 in group. SMS, MMS and iMessage as well as group messaging are all turned on. Has worked intermittently but now cannot see or respond in that particular chain. Can send independently to the non iPhone (Samsung) but not in group. Other iPhone 6 and 5 in group work fine.

The reason why you have to turn off 3Gs is because T-Mobile does not support iPhones 1700 something or other. You have to turn off the 3Gs on the iPhone to make it work.
As already provided, it shouldn't matter since the iPhone is designed to automatically connect to the fastest internet connection available. If wi-fi access and 3G network access is on, when in range of an available wi-fi network you have access to and have connected your iPhone with previously, the iPhone will connect to the wi-fi network automatically. When leaving the range of the wi-fi network, the iPhone will connect to the 3G network if 3G network access is available. If 3G network access is not available, the iPhone will connect to EDGE or GPRS - whichever is available at the time.
If this is unique to T-Mobile's network with the iPhone for some reason since T-Mobile is not an official carrier for the iPhone in the U.S. and you were instructed by T-Mobile to do so, then you need to do so.
If this is not working now, the problem lies with T-Mobile and I have no idea what to tell them for them to recognize where the problem lies on their end.

Axis bank net banking not working on ipad2

Axis bank net banking not working on ipad2

Sounds like a problem at the bank end, maybe a call to them might fix things.

Safari is now opening with multiple windows. Not sure what changed in my settings. I prefer Safari to open with a single homepage, which I've always set to Yahoo. Any help?

Safari is has begun opening with multiple windows. Not sure how this change happened. I prefer Safari to open with a single homepage, which I've always set to Yahoo. Any suggestions?

Quit the application. Force quit if necessary.
Relaunch it by holding down the shift key and clicking its icon in the Dock. From the menu bar, select
Safari ▹ Preferences... ▹ General ▹ New windows open with: Homepage

"no serializer is registered..." error with a web service not working

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

Multiple delete is not working.

Hi,
Multiple delete is not working. Please find my backend bean code. Please let me know the issue in my code.
Table:
<af:table value="#{bindings.CmProcessParamValueView13.collectionModel}"
var="row"
rows="#{bindings.CmProcessParamValueView13.rangeSize}"
emptyText="#{bindings.CmProcessParamValueView13.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.CmProcessParamValueView13.rangeSize}"
rowBandingInterval="1"
selectedRowKeys="#{bindings.CmProcessParamValueView13.collectionModel.selectedRow}"
selectionListener="#{bindings.CmProcessParamValueView13.collectionModel.makeCurrent}"
rowSelection="multiple"
binding="#{backingBeanScope.backing_app_RunCalcPage.t1}"
id="t1" width="720px" inlineStyle="height:140px;" partialTriggers="cb6 cb3"
filterVisible="true" filterModel="#{bindings.CmProcessParamValueView13.queryDescriptor}" >
<af:column sortProperty="ParamValue7"
sortable="true" width="690"
headerText="Comm Type"
rowHeader="unstyled"
id="c2" align="left" filterable="true">
<af:outputText value="#{row.ParamValue7}"
id="ot4"/>
</af:column>
</af:table>
Backing Bean Delete Code:
RowKeySet rowKeySet = (RowKeySet)this.t1.getSelectedRowKeys();
CollectionModel cm = (CollectionModel)this.t1.getValue();
System.out.println("RowKeySet is: "+ rowKeySet.getSize());
for (Object facesTreeRowKey : rowKeySet) {
cm.setRowKey(facesTreeRowKey);
JUCtrlHierNodeBinding rowData =
(JUCtrlHierNodeBinding)cm.getRowData();
System.out.println("RowData is : "+rowData.getAttribute("ParamValue7"));
rowData.getRow().remove();
Thanks.

Issue is resolved...
Solution is,
Remove selectionListener and selectedKey attributes from the table.
Delete code is:
DCBindingContainer dcBindings =
(DCBindingContainer)getBindings();
DCIteratorBinding dcIterator =
dcBindings.findIteratorBinding("Iterator...");
RowSetIterator rs = dcIterator.getRowSetIterator();
RowKeySet rks = this.t1.getSelectedRowKeys();
Iterator rksIter = rks.iterator();
while (rksIter.hasNext()) {
List l = (List) rksIter.next();
Key key = (Key)l.get(0);
Row row = rs.getRow(key);
if(row != null)
row.remove();
}

Converting WordPerfect to PDF with desktop printer tool: Not working

I have been a monthly subscriber to Adobe CreatePDF for many years! I work mainly with Correl WordPerfect, but with the change to the Pack version it is not supported. I downloaded the desktop printer tool; it is installed. However, when I follow instructions and print, I get nothing. Where does the PDF go? What can I do? Please help! I cannot continue to pay monthly if I don't get service.

Thank you very much. I have uninstall adobe desktop printer tool and my wordperfect. Next step is follow your suggestions but I am no computer anything, lol. 1. How do I know if I have a win 7 sp1? I have win 7 that much I know. 2. Where can download the hotfix? 3. With adobe createpdf, I didn't need adobe ps printer setup, I don't have a laser printer at home, I have an hp inkjet printer.
Please help again and soon, :).
Date: Tue, 7 Jan 2014 11:52:08 -0800
From: [email protected]
To: [email protected]
Subject: Converting WordPerfect to PDF with desktop printer tool: Not working
    Re: Converting WordPerfect to PDF with desktop printer tool: Not working
    created by H.Spector in Adobe PDF Pack (formerly CreatePDF) - View the full discussion
Please do following
(A). If your system is Win 7 SP1 then install a hot fix to correct inetpp.dll version at C:\Windows\System32 folder.After installing the hot fix version will be 6.1.7601.21819 from 6.1.7601.17514.
Note please uninstall CreatePDF Desktop printer then reinstall after applying the hot fix
(B). If you have not installed Adobe Postscript driver yet then please install one as below:
How to Install PS printer:
1. Open Start menu > Devices and Printer ( or from control panel) and select "Add a printer"
2. Select "Add a local printer"
3. Select "Use an existing port: LPT1: (Printer port)
4. Select any company and any PS printer with Adobe PS printer driver(not clone) such as Xerox and Xerox Phaser 6120PS
Adobe PS driver files:
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532123/450-202/PagesfromHowToInstall_PS_PrinterDriver_onWin7.jpg
(C) Go to the printer configure port and verify your Adobe ID and password
1. Goto Start> Devices and Printers > Adobe CreatePDF Desktop Printer
2. Click right mouse to open “Printer properties”.
3. Select “Ports” tab
4. Select ”Internet Port: Adobe CreatePDF Desktop printer”
5. Click “Configure Port…” button at the bottom
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532115/410-417/IPP_Scr eenshot.png
When printing to PDF you will see below and an email is delivered to your email inbox. The converted PDF file will be stored at https//files.acrobat.com.
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532116/395-199/IPP_Scr eenshot_Queue.png
Thank you
Hisami
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5989811#5989811
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5989811#5989811
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5989811#5989811. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe PDF Pack (formerly CreatePDF) at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I dont know my security questions and the email with those questione is not correct

i dont know my security questions and the email with those questione is not correct

I would contact Apple ID Support.
Apple ID Support

CP7 quizzes with multiple question banks not working

Similar Messages

Maybe you are looking for