Cp8.0 html5 file plays fine in chrome, but moving the timeline button causes audio to vanish. what to do?

I have created a session with a combination of ppt slides with audio, and also a screen capture with audio and put it all together and published in html5. seems to work fine, i can open it on my computer by clicking on the html5 file (chrome and IE.) Moving the continuous scroll pointer often causes the audio to not be played. I know I can advance with forward and reverse buttons, that works ok. (Refreshing the html5 file in the browser fixes things and goes back to start) This opens up many questions for a novice like myself:
1. Am I posting this in the right place?
2. Is the timeline button shown only to be admired from afar, and not touched ?
3. Has this been fixed in 8.1 ?
4. I don't want or need scalable window sizes ( 1300 by 720 is fine,) so should i not use html5 at all ? I want it to work on IE, Chrome, and Firefox.

thanks. i see i need to explain better:
I am describing the browser window as it appears if you simple display the html5 file that is created by publishing. I have not added a single button or feature to control movement. my project consists of slides with audio that advance after so many seconds, a captured screen sesssion, more slides, and a quiz. The buttons for play, forward, backward, and the horizontal progress bar with the 'button' (upward pointing triangle) are all native to the html that is being displayed and 'played.'
Now, seeing that displayed, a user would be tempted to hit these buttons and to move the linear time by grabbing and moving the triangle pointer. sometimes this works perfectly, but sometimes moving the pointer causes audio to disappear and it will not play again on any slide. is this a clear description of the problem ? I do not understand some of your comments, but it seems that we were not on the same page, so it seems ok not to understand. FYI, my published ~10 minute sessions are about ~20 MB for all files and folders.
8.1 doesn't exist. i see, my mistake. i meant 8.0.1
I do not need anything but a screen with 1300x720 resolution, so i will try going to SWF. I am recording a session to teach a software tool that is based on the eclipse environment, and the screen capture includes many graphics and much text, so any scaling whatsoever makes it ugly and hard to read. At one point i may have been thinking of scalable windows, but i realize now it is the last thing i need. The quality of the capture is excellent with 1300x720 ( and since 720 is native for powerpoint, i have no scaling in either ppoint or the captured screen sessions.

Similar Messages

Large .dv file plays fine in Quicktime, but audio out of sync in iMovie??

hi,
i'm trying to convert some old analog 8mm tapes to digital. to do this, i'm using a sony trv320 camcorder with firewire feeding iMovie '08. i've imported an entire 2 hour tape into iMovie, and everything is fine except that at some point, the audio gets out of sync from the picture. i've opened the huge 24 GB .dv file in Quicktime, and everything is in sync, so I assume this is some kind of problem related to iMovie. i've done lots of searching on this and have made sure that the camcorder is sending 16 bit audio out. i also tried using mpeg streamclip to split the huge .dv file into smaller parts, but this resulted in the same audio sync problem (which is weird).
is my only option to manually import my tapes 10 minutes at a time? please say no
the most puzzling thing about this is that the huge .dv file is perfectly in sync all the way through when playing back in Quicktime.
i'm at a loss!! hope someone can help.

I've edited in FCP and exported with compressor with all the appropriate settings, to mpeg 2.
Double check to make sure that you edited in Anamorphic and also encoded as 16:9 video not 4:3 - also make sure you set the Track to 16:9 Letterbox in DVD SP.
What encoding rates did you use for the video and audio? Sometimes if the rates are too high it can cause drifts.
On the audio side, did you export the FCP as self contained and make the audio AC3? Also you can try just exporting the audio as an AIF and encode that as an AC3.
How did you burn the DVD (Speed and Media used?) Sometimes bad burns/media can cause issues.
Also look at these threads
http://discussions.apple.com/thread.jspa?messageID=3131142&#3131142
http://discussions.apple.com/thread.jspa?messageID=1872235&#1872235
http://discussions.apple.com/thread.jspa?messageID=1363574&#1363574
http://discussions.apple.com/thread.jspa?messageID=1086775&#1086775

HT1926 Quicktime stuttering, MOV file plays fine on my iphone but play it in my PC the sound and video stutters. happened only after the last update. how to fix

Quicktime stuttering, MOV file plays fine on my iphone but play it in my PC the sound and video stutters. happened only after the last update. how to fix?

Hi Richmoller51,
Welcome to Apple Support Communities.
See this article for some troubleshooting steps that can help with video playback in iTunes or Quicktime:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Best,
Jeremy

Every now and then when I log in to hotmail the program will open, all my e-mails are there but I can't open any of them. At the same time everything opens just fine on Chrome. Eventually the problem on Mozilla fixes itself. Suggestions?

Occasionally hotmail will open just fine but I cannot access any of my listed e-mails or files. At the same time everything works just fine in Chrome. Eventually the problem on Mozilla sorts itself out somehow and I can then open e-mail through that browser again. I don't make any changes on my system to correct the problem.

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

MP4 Plays Fine in Quicktime, but Audio Lags Near Clip's End in WMP. Huh?

This is weird. I've made several MP4s in Premiere Pro CS6, some only 10 minutes long, and the audio goes a bit out of sync (lagging behind) only in WMP, not Quicktime, when playing the rendered MP4. QT plays it all just fine. Is there something needing to be set in Premiere or AME to make it all stay sync'ed and play fine in any player?
Quick backstory: I shoot 1920x1080p DSLR video at 24fps (23.97#) and I capture audio separately on a Tascam portable at 24-bit 96kHz (which is think is 29.97) and toss it onto a Pr Pro CS6 timeline. I do use the cruddy camera audio just for syncing then ALT+Click to separate the camera's audio track and delete it, leaving the now-synced good audio in place. Then I toss a few transitions and effects (mostly color grading) on the video, nothing fancy, and export out an .MP4 from Premiere which of course fires up AME. I think the problem is the preset I'm picking. A screenshot of my AME settings is attached. I am using one of the presets for Apple TV/iPad/iPhone which is basically renders the video down to 1280x720p with H.264 compression (no surprise that Quicktime plays it back without issue). I'm assuming a codec comes into play here, or just WMP being stupid? I know what a codec is but I don't Premiere which one to use (I assume you can), so if that's the answer please elaborate a bit when you answer, lol. I'm a seasoned photographer and a fairly green video editor (and a lousy video shooter, lol!).
As a further test, I sent the timeline out to an MP4 again but this time I simply chose H.264 and picked the HD 23.976 1080p preset which does use different VBR, etc. That video plays fine in both, but a 10-minute MP4 is almost 2GB! I was hoping for something in the 100mb-150mb range so I could YouSendIt out to people, and the lousy AppleTV/iPhone 4 720p H.264 preset does give me a filesize in that range.
Any thoughts on what to set to get a workable filesize of <200mb with a 720p clip that actually works in WMP as well as QT? I hope I'm even asking the question correctly.
Thanks!

Harm, I didn't pay attention to those settings, I should have. I got hung up in the preset names and figured those were my only choices. How green I am, lol. I made a preset with a Target of 4 (max 6) and VBR 1 Pass, and I knocked the audio down to 128K being it's just speech, and it all worked great. The new file plays in both players perfectly and also plays on my iPad with no jitter. Filesize is about 240mb but that's fine, it works. Problem solved and in the books. BTW, I use a GTX570.
Jim, I agree, VLC is super, it was the only player that would play 5D Mark II files right out of camera back in 2008, on my dual core Dell laptop with a cheesy Nvidia 7900 graphics card. Problem is, the majority of people I'm sending these MP4s to are Mums & Dads in our church, etc, and you know quite well that those folks are running some consumer Dell or HP setup they bought at Costco on closeout.
Funny backstory, when the 5D2 came out in Sept 2008, that was what thrust me into video. So I immediately bought the Prod Premium CS4 Suite (already owned Photoshop for a few years being a stills guy) and installed it on that Dell 17" laptop I mentioned above. After getting the 5D2 finally in Jan 2009, I actually had the nerve to take my first attempt at creating a video in Premiere and encoding it on that laptop. I literally had to kill AME partway through because I was seconds away from burning out my processor (I had been using RealTemp because of how hot that thing ran using Word, lol). It was that event that made me convince myself to start researching how to build a real editing PC (using an i7 920 at the time). I probably drove Harm nuts back then with all my questions, lol! But this rig has been my workhorse and has been through countless upgrades, the only thing remaining from the original 2009 build is the case and the power supply.
I know, you guys didn't need all that info, just felt like shooting the breeze. Thanks again!

Quick time files play on my computer but in other computers only audio...

Dear Forum.
I have quick time pro.
I am a composer so I upload a movie (mov. file) to my digital performer file...I write music, I bounce the music with the picture to Quick time movie and I have a mov. file.
The exported file plays fine on my computer but in other computers only audio is showing, not video...
I tried many other (pc and macs)
Please tell me what the problem is. Does it have to do with my settings?
Please advise.
Thanks

I am a composer so I upload a movie (mov. file) to my digital performer file...I write music, I bounce the music with the picture to Quick time movie and I have a mov. file.
The MOV file extension refers to the file container and not to the compression format contained within the file. To better understand what is goin on here, you will need to open you file in QT and check the "Inspector" or "Properties" window to see what video compression codec was actually used in the file and them determine if these other systems also have this codec available for playback.

Export for web files play on one server, but not on another.

I exported my movie from QT Pro 7.6.6 and it created all the files I need. I have the movie "sniffer"(movie that determines which version to pull up depending on device) and then the sub movies. When I go straight to the sniffer in Safari with the files on my client's server, the movie plays fine. When I do the same from my iPad or iPhone, it won't play from that server.
If I move the exact same files to another server and go to the sniffer, the movie plays on all devices. Could there be some sort of server setting preventing them from being played on my client's server?
If so, what specifically needs to change on the server?
-Kirk

Anybody? Bueller? Bueller?

I have video embedded in a PDF, it plays fine on desktop but won't play on iPhone or iPad

I have video embedded in a PDF, it plays fine on desktop but won't play on iPhone or iPad, is there a workaround? From what Ive seen through Google searches, I dont think there is but wanted to reach out to the pros.
thank you for your help!!

Read this:
http://forums.adobe.com/thread/982072?tstart=0

When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?

When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?

Thanks David. I had to convert the mts file to Quick Time (using AunSoft Conversion software) before I could import it into Final Cut Express. And I made sure I kept the size of movie (720 X 480 with letterbox) to compliment what I set my Panaconic AVCCAM video recorder at (720/60). Even after I fully render it, it still looks fuzzy in the Canvas window at the right that plays what I have editing down in the Timeline. A friend that edits some using Final Cut Pro helped me to narrow things down to this problem. This is also wierd. If my Viewer window at the left is set to 200% to get the person's head the same size in the Canvas window at the right we needed to put it to 400%. Does this make any sense. We think we need to control the Time line resolution somehow but cannot find any options from my manual, or the help, or in the various drop down menus. Do you have any clue? What is going on?

Can I play sound through IPad but watch the video through TV ?

I want to play sound through IPad but watch the video through TV using Apple TV
Is that possible ?

On my mac through itunes, I am able to control Apple TV sound through a master and two sub master volumes.
One being my Apple TV volume (HDTV) , and the other being my mac (internal speakers).
That being said, it might be possible to on iPAD through itunes (music).

Trying to import a .mov file in final cut ex but get the file error 1 file recognized 0 access denied 1 unknownpress, but get the press

Trying to import a .mov file in final cut ex but get the file error 1 file recognized 0 access denied 1 unknown

Most likely the file cannot work directly in FCE.
Please provide details on the file properties.
Al

Moving the timeline from a loaded swf file

Hi,
I have been at this problem for awhile now.
I have a two swf files, whic are loaded using ths code as an example:
stop();
var req:URLRequest = new URLRequest("Enchilada_A.swf");
var loader:Loader = new Loader();
function imageLoaded(event:Event):void {
ldContainerB.addChild(loader);
loader.contentLoaderInfo.addEventListener(Event.COMPLETE, imageLoaded);
loader.load(req);
The first one is triggerrd by a MC button that is on the timeline.
That first swf loads fine.
At the end of that file(which is short animation)
I have code that says:
MovieClip(parent).gotoAndStop("frameThree");
I have also tried:
MovieClip(root) and
if (movie Clip is parent) {
MovieClip(parent).gotoAndStop("frameThree");
and/MovieClip(parent).nextFrame();
I have also tried placing this. or root. into the code.
I am not talking to the timeline from this swf file.
Once the timeline moves to the next Frame the new swf file can load.
My solution was to combine both swf files into one, which loads from the timeline button.
It works and I can gt by but I really woud like to learn how to load a swf and talk to the timeline fro more flexibilty.
I'm out of strategies.
Is my code in the wrong place(at the last frame of the animation?
Should it be written on the timeline by creating a new var that has a function once the animation is completed.
Any suggestions and/or commens would be greatly appreciated.
Thanks.

Thanks,
I finally had a chance to get back to this project and used your suggestions, whichare definitiley helpful. I also, created a new and very basic version of the project so I could easily see what was happening.
This is the code that works:
stop();
MovieClip(parent.parent).nextFrame();
trace(container_mc);
I'm still trying to understand how the child parent relationship is working but this will get me going in the right direction.

My Iphone 4 screen just went black and it wont come on but it vibrates on ringer. Ps: The home button doesn't work. What do I do!?

My Iphone 4 screen just went black and it wont come on but it vibrates on ringer. Ps: The home button doesn't work. What do I do!?

If it never worked after the screen replacement then it would appear that you have a hardware problem either caused by the repair or the problem that lead to the screen replacement.

HT4993 My volume down button is not working. The UP button works, but not the down button. I have tried to restart it and that didn't solve the problem.

My volume down button doesn't work on my iPhone. The UP buttown works, but not the down button. I have tried a hard reset and that didn't fix it.

Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

TS2755 Hi All - I sent a text using my iphone 5 - It is PAYG and had no money in it. It tried to send as an SMS but gave the 'green button reject message'. After deleting the convo, the phone keeps trying to send the deleted text via SMS and wont stop not

Hi All - I sent an sms using my iphone 5 - It is PAYG and had no money in it. (stupidly)
It tried to send as an SMS but gave the 'green button reject message'.(no money)
Step 2 in this stupidity - the phone keeps trying to send the deleted text via SMS and wont stop notifying me of this. Totally ruining the functionallity of my phone, and more so totally annoying. All I want to do is stop the constant re-trying of sending the deleted SMS.
Any ideas?
Many Thanks!

Hi, many thanks for your help - Pressing and holding sleep/reset hasn't worked, the msg is still continually reporting it is failing to send. I can restore to a previous version however I'll lose my paid apps. Is there any way to work around this. I'm only concerned about one app - Epocam HD which I purchased last month. My last backup on PC is 4 March 13 - before I bought the paid app - Itunes advises me I'll have to re-pay to get my apps (app) back. Even though it advises that icloud backed up this morning at 1:30 am (which although it is before the text, I cannot manually select this restore).
What a mess!

Cp8.0 html5 file plays fine in chrome, but moving the timeline button causes audio to vanish. what to do?

Similar Messages

Maybe you are looking for