Cp8 Drag and Drop won't pause the interactions

Hi Everyone,
I created a drag and drop interaction slide. Once I preview it, it's pausing fine after 1.5 seconds as defined in the actions tab, under others.
As soon as I drag a drag source to a drop target the slide continues to play and pauses again after a few seconds. The 2nd time I drag any other drag source the slide continues to play and moves to the next slide before the interaction in complete.
Help!

Hi,
There can be two possibilities for your case.
1.You must be using the On drop actions in your interactions. If these actions are simple actions they move the play head of the movie, so here you need to have "Advanced actions" to maintain the playhead instead of simple actions.(As Lieve mentioned above)
Or
2.You must have multiple answers set up for the interaction.(i.e You must have set the "many to one" mapping wrongly in the Correct answers dialog box).
(Adobe Captivate Help | Drag-and-drop interaction (Cp 7)  see Map multiple answer sets to drop targets section in the help page.)
If these are not the settings of your interaction let us know. You can share your snapshots of your Dnd settings here.
Devraj

Similar Messages

  • Why won't Premiere Pro allow me to drag and drop my footage into the timeline?

    why wont my software allow me to drag and drop my footage into the timeline?
    [Edit: the title of your post was changed to be more descriptive]
    Message was edited by: Kevin Monahan

    Get Started with Premiere Pro
    New to Premiere Pro? Get started with your first project — editing a video. In less than an hour, you'll learn to edit together different types of media to tell a video story.  

  • How can I allow a learner to review a created Drag and Drop Quiz to show the learner their incorrect/correct answers?

    Captivate 8: I have created an assessment with two multiple choice question slides and eight drag and drop question slides. After the learner views their score, I would like them to be able to review all of their answers to see where errors were made. Currently, the review quiz only shows their answers and the correct answers for Multiple choice question slides. Ideally, I would like a review of the drag and drop question slides where the incorrect choices are outlined in red or something to this effect. I appreciate any insight and suggestions!

    Sorry, D&D is not a normal question slide and I can only recommend logging a feature request. I would really like to be able to choose whether an interaction is reset or not, because this problem doesn't exist only for D&D but for all learning interactions as well.

  • When I drag and drop an icon from the address bar to the desktop is does creat the shortcut but will not display the website icon, only the firefox icon, how can I display website icons?

    When I drag and drop a website icon from the Forefox address bar to the desk top, the short cut is created but the icon that appears is the firefox Icon. I want to disply the icon from the website that the short cut refers to. I have checked all I can think of in my computer to no avail.

    You have to assign the favicon yourself to the desktop shortcut (right-click the shortcut: Properties) after you have dragged the link to the desktop.
    You can usually find the favicon in Tools >Page Info > Media and save the icon there.
    Otherwise use the main domain of the website and add favicon.ico (e.g. mozilla.com/favicon.ico ) to display the favicon in a tab and save that image to a folder.

  • Drag and drop won't work in application

    Hello,
    I want to drag and drop elements of a listbox to another position inside ob the listbox.
    That works very fine as long as I use LabView during the programming of the VI.
    If I build the VI to a application drag and drop is not working anymore.
    What is the problem?
    Thanks.
    Ronny

    Just hit the bug myself.  Thanks for taking the time to post so I don't have to waste time debugging a know issue.
    Thanks,
    Matt
    Matthew Fitzsimons
    Certified LabVIEW Architect
    LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

  • Drag and Drop won't work and Application icons turned to folders

    Today I lost the ability to drag icons. After a bit of searching on the internet I read that deleting the Library/Cache folder might clear it up. I did so, then rebooted the computer.
    Now all my Application icons have become folder icons. What's worse is all my files show a blank icon and say there is no application present to open them when I attempt to open them.
    And I still can't drag my icons.
    What should I do?
    If I could just get drag and drop back in action I could back up my data to my external HD and do a fresh install.
    Or is there some way to move files without dragging them?
    Is there some way to get the Cache folder back to normal?
    I've already repared premissions.
    I'm running OS X 10.2.8
    700 Mz eMac Mac OS X (10.2.x)

    Here's more on Drag+Drop;
    Here's Apple doc.#107247. Apple says to restart your Mac as many times as it takes to allow drag and drop again. This problem is limited to some Jaguar users. It may take numerous restarts.
    It is also suggested you install the 10.2.8 Combo update. You can install right over your present 10.2.8 with no issues. Make sure you unplug all USB and FireWire before installing. Just to be safe, Repair Permissions before and after the install.
    If none of the above works (make sure you restart 100 million times!) download and install the free Dragster 1.61 program which addresses this issue.
    Cheers!
    DALE

  • Canu00B4t Drag and drop a service over the model Workspace

    Hi guys,
    I´m trying to consume an Eservice published in the ServiceRegistry. I can see all the services in the result list when i search them, but when i try to drag and drop any of those service over the model workplace nothing happens.
    I hope someone can help me to solve this problem.
    Thanks in advance,
    Regards,
    Diego.

    Hi
    Another thing I'd suggest to do (to better understand what goes wrong) is to make sure the VC console is open.
    Please goto View menu and check the 'Console' entry (it should be visible in the bottom of the application)
    Once you reproduce your problem the console should show information on errors - please put them here and I'll try to analyze the problem
    Guy

  • How to Drag and Drop mutliple rows in the jtable

    hai
    i am having a jtree ,in which i added many nodes,each nodes hav
    corresponding jtable with values. now i need to drag a group of rows from a jtable of particular node in jtree to another node.
    at the same time i am possible to drag and drop the single row in the same sceanrio which i mentioned above.
    how to do this,can anyone pls help me regarding this
    goutham

    The Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/misc/dnd.html]How to Use Drag and Drop has an example with JTable support.

  • When I try to move one layer to another layer, my drag and drop won't do it. What do I need to do?

    The drag and drop technique,don't seem to work in my program. is there something I need to configure?

    For an example we will use tab 1 for the old image and tab 2 for the new image. In that the images from tab 1 will be dragged and dropped to tab 2.
    Open two images as per above.
    Click tab 1 to make that the active document if it is not already
    In the layers panel click on the layer that has the image
    In the document window (the canvas) move the cursor over the image, press left mouse button down and drag to tab 2 (don't let go of mouse button)
    The document in tab 2 will become active
    With the mouse button still held down drag the cursor over the center of the document (canvas) {If you wish to center the image on the canvas you may now hold down the shift key while the mouse button is still held down
    Let go of mouse button then let go of shift key
    You should now see two layers in your layers panel. One image is on top of the other so you can not see the bottom image
    You now have a few choices, you can expand the canvas and move the image(s) so they are side by side
    You can add a mask to the top layer and paint away what you don't want
    You can select parts of the background of the top image then delete it
    You can lower the opacity to blend the two images into one
    You can use a blend mode to blend the two images into one
    This apart is totally up to you and if you need any further advice let us know or if you are still stuck, please capture your screen so we can see what you did and have the layers panel open with any collapsed layers expanded.

  • Xp-64 drag and drop won't w

    I have?a Zen Micro 6 gb. It has firmware version 2.20.05. I can't get the drag and drop function to work with my XP-64 computer, but when I hook it up to my XP-32 laptop I can drag and drop no problem. I didn't have to install anything, it just did it the first time I plugged in. I downloaded both drivers .30.03 and 2.0.00 and neither helped the situation. The pc is beeping when I plug-in and unplug my Zen, but not showing it under the [My Computer] like it should. What do I need to do to get my 64 bit machine to be able to drag and drop?Thanks

    google those issues.

  • Drag and drop won't work since installing InDesign CC 2014

    That's it really. Any ideas?
    I'm on an iMac with 10.9.4. Since installing InDesign from Creative Cloud Drag and drop, and I think cut and paste doesn't work.

    google those issues.

  • Drag and Drop is not opening the highlighted folder so I can't drop into route folder

    New issue since Yosemite upgrade:
    When I grab any file to drag & drop somewhere, and move that file over a folder highlighting it to open a route folder to drop it into, it won't open the folder to reveal its contents. I can only drop the file into that folder. So it's one folder at a time. Man, it can take me almost a minute to get one file where I want it to go when there is multiple subfolders. This is true for any folder anywhere including the sidebar and within any application that opens a finder window for saving etc. It is very limiting and frustrating.
    Also, it is only for my user login, the other users work fine. But I really don't want to have to create a new one.
    Please, help! I would appreciate guidance from anyone, or at the least sympathy to know I'm not the only one.
    My mac specs:
    OSX Version 10.10
    Macbook Pro Retina 15" Late 2013
    2GHz Intel Core i7
    Intel Iris Pro 1536
    (also sorry about the category if it's wrong, there was no 'finder' category)
    Stu.

    Sorry, i forgot to write select RELAUNCH. If the newly created one didn't fix the problem, then something else is amiss. One way to determine that is to log into a good admin account, open up Users & Groups, delete the bad account, saving its data, recreating it with the same credentials, logging into the newly created one, and seeing if the problem's fixed. If so, then open the save data disk image stored in /Users/Deleted Accounts/ and slowly move plists from the Preferences folder into the new account's folder, restarting, and seeing if the problem reoccurs. Eventually, you'll isolate the bad or corrupting items. The procedure's long and time-consuming, but faster than resetting all the preferences for everything you've already set.

  • I'm unable to drag-and-drop a script from the Story window in Premiere Pro to a clip

    I have a film script visible in the Story window, and I try to drag it to the relevant clip in the Premiere Pro project window—but nothing happens.
    I have also tried to attach an astx file, but I get the "matching scene number not found" error, even though I put scene number 1 in the clip and in the astx.
    What am I doing wrong?
    Incidentally, though your help indicates that "all the scripts" you have in Story will be visible in the Story Windows in Premiere Pro, I can see only the film scripts—not for instance the multicolumn scripts I also have.  Is there something I can do about this?
    Thanks you,
    PIerre Sauvage

    Hi,
    Please make sure that you are performig drag drop with scenes and not complete scripts. You will notice a cursor change when you do so. For more clarification, please refer to this post. 'http://forums.adobe.com/message/5533247#5533247'.
    Importing astx is a much longer way to go through the same thing , so i would suggest to try out the drag drop workflow only and let me know in case you still face issues with it.
    Also, yes, column scripts wont be visible to you in the Story panel inside Premiere. For this, I am afraid you will have to convert your column scripts into a film script. Let me know if you need help with this.
    Hope this helps.
    Thanks
    Rashi

  • Difficult: Drag and Drop: how to get the path of the drag-source ??

    I have to write an applet, after a "Drag&Drop"-Operation from a MS-Word-document to this applet, the applet is supposed to show the path of the document.
    Does anyone know how to do this ?
    thanks

    http://forum.java.sun.com/thread.jsp?forum=4&thread=300727

  • Drag and drop a node in the line graph

    Hello Flex experts,
      I am using line graph for the monthly data. I want to drag a node , maybe the february node down. How can i achieve it? My code as follows does not work. Will highly appreciate your help as it is urgent requirement.
    <?xml version="1.0"?><!-- charts/BasicLine.mxml --><mx:Application 
    xmlns:mx="http://www.adobe.com/2006/mxml">
    <mx:Script><![CDATA[ 
    import mx.controls.Alert; 
    import mx.collections.ArrayCollection; 
    import mx.core.DragSource; 
    import mx.managers.DragManager; 
    import mx.events.*; 
    import mx.containers.Canvas;
    private  
    function dragExitHandler(event:DragEvent):void {Alert.show(
    " An event exit . ");}
    private  
    function dragOverHandler(event:DragEvent):void {Alert.show(
    " An event drag . ");}
    Bindable] 
    public var expenses:ArrayCollection = new ArrayCollection([{Month:
    "Jan", Profit:2000, Expenses:1500, Amount:450},{Month:
    "Feb", Profit:1000, Expenses:200, Amount:600},{Month:
    "Mar", Profit:1500, Expenses:500, Amount:300}]);
    ]]>
    </mx:Script>
    <mx:Panel title="Line Chart">
    <mx:LineChart id="myChart" dataProvider="
    {expenses}" showDataTips="
    true"dragEnabled="
    true"dragMoveEnabled="
    true"dropEnabled="
    true"dragOver="dragOverHandler(event);"
    dragDrop="dragExitHandler(event);"
    dragExit="dragExitHandler(event);"
    >
    <mx:horizontalAxis>
    <mx:CategoryAxis dataProvider="
    {expenses}" categoryField="
    Month" 
    />
    </mx:horizontalAxis>
    <mx:series>
    <mx:LineSeries yField="
    Profit" displayName="
    Profit" 
    />
    <mx:LineSeries yField="
    Expenses" displayName="
    Expenses" 
    />
    </mx:series>
    </mx:LineChart>
    <mx:Legend dataProvider="{myChart}"/>
    </mx:Panel> 
    Best regards!
    Sandip

    did you ever figure this out? I am trying to figure this out too, and it's not easy.

Maybe you are looking for