CPAChannelStoppedException: Channel stopped by administrative task (SAP XI)

Hello friends.
I am running a interface to R3 from sap-xi, but the ejecutión return the next error:
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Channel stopped by administrative task.: com.sap.aii.af.service.administration.api.cpa.CPAChannelStoppedException: Channel stopped by administrative task..
I need your help, but quickly. Many thanks
Cristian

Hi,
Are u using RFC adapter to communicate ? IF so find out RFC adapter service is active in Adapter Engine (Visual Admin)
Do the CPA Cache Refresh
Hope all adapter engine is active and running..
Check out these
Rgds,
Moorthy

Similar Messages

Channel stopped by administrative task - ADAPTER.JAVA_EXCEPTION

Hi Guys,
             Adapter engine at RWB has the following error message.
==== Events on Server 44769350 ====
Adapter Engine, message: Fatal DeleteJob (Default Delete Job) failed.
(Details: Code: MS.JOB.DELETE, Location: com.sap.aii.af.ra.ms.impl.core.archiving.executor.DeleteExecutor, Reason: com.sap.aii.af.ra.ms.api.DeliveryException: Failed to delete unassigned audit log entry keys. Reason: com.sap.aii.af.ra.ms.api.DeliveryException: Could not get unassigned audit log entry keys, due to: ORA-01089: immediate shutdown in progress - no operations are permitted
, Time: 08.03.2009 10:00:15)
Adapter Engine, message: Fatal DeleteJob (Default Delete Job) failed.
(Details: Code: MS.JOB.DELETE, Location: com.sap.aii.af.ra.ms.impl.core.archiving.executor.DeleteExecutor, Reason: com.sap.aii.af.ra.ms.api.DeliveryException: Failed to delete unassigned audit log entry keys. Reason: com.sap.aii.af.ra.ms.api.DeliveryException: Could not get unassigned audit log entry keys, due to: ORA-01089: immediate shutdown in progress - no operations are permitted
, Time: 15.02.2009 10:00:11)
Adapter Engine, message: Fatal DeleteJob (Default Delete Job) failed.
(Details: Code: MS.JOB.DELETE, Location: com.sap.aii.af.ra.ms.impl.core.archiving.executor.DeleteExecutor, Reason: com.sap.aii.af.ra.ms.api.DeliveryException: Failed to delete unassigned audit log entry keys. Reason: com.sap.aii.af.ra.ms.api.DeliveryException: Could not get unassigned audit log entry keys, due to: ORA-01089: immediate shutdown in progress - no operations are permitted
, Time: 01.02.2009 10:00:20)
At the adapter engine monitoring at RWB
Adapter type JPR has following error message
SLD host:port = ERPDEV02:50400
Error getting JPR configuration from SLD. Exception: No entity of class SAP_BusinessSystem for DXI.SystemHome.erpdev02 found
No access to get JPR configuration
I am getting following error when try to send a file from other business system to XI server.
<SOAP:Envelope xmlns:SOAP=''http://schemas.xmlsoap.org/soap/envelope/''><SOAP:Header/><SOAP:Body/></SOAP:Envelope>
as the response.
<?xml version='1.0'?>

<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'>
<SOAP:Body>
    <SOAP:Fault>
      <faultcode>SOAP:Server</faultcode>
      <faultstring>Server Error</faultstring>
      <detail>
        <s:SystemError xmlns:s='http://sap.com/xi/WebService/xi2.0'>
          <context>XIAdapter</context>
          <code>ADAPTER.JAVA_EXCEPTION</code>
          <text><![CDATA[
com.sap.aii.af.service.administration.api.cpa.CPAChannelStoppedException: Channel stopped by administrative task.
                at com.sap.aii.af.service.administration.impl.cpa.CommonCPA.checkChannelState(CommonCPA.java:58)
                at com.sap.aii.af.service.administration.impl.cpa.LookupManagerDelegate.getCPAObject(LookupManagerDelegate.java:83)
                at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.setup(XISOAPAdapterBean.java:227)
                at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:689)
                at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_3.process(ModuleLocalLocalObjectImpl0_3.java:103)
                at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:292)
                at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0.process(ModuleProcessorLocalLocalObjectImpl0_0.java:103)
                at com.sap.aii.af.mp.soap.web.MessageServlet.callModuleProcessor(MessageServlet.java:174)
                at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:436)
                at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
                at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
                at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
                at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
                at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
                at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
                at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
                at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
                at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
                at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
                at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
                at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
                at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                at java.security.AccessController.doPrivileged(Native Method)
                at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
                at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
          ]]></text>
        </s:SystemError>
      </detail>
    </SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
Thanks for Ur time
Senthil

Hi Senthil,
As suggested by others there is no problem with your communication channels ,,, the problem you face is because Your DBA has initiated the SHUTDOWN IMMEDIATE command. This will shutdown Oracle and terminate all active operations.
Please tell him to start the services and Wait until Oracle has been restarted by your DBA.
Regards
joel

SOAP request to XI. error: "Channel stopped by administrative task"

Hi ,
We are working on SOAP --> XI --> Idoc scenario.
The webservice call is an Asynchronous one. I done the design and configuration and provided the WSDL to the webservice applicant. When they tried to send the message they are getting the following error.
HTTP/1.1 500 Internal Server Error
Set-Cookie: JSESSIONID=(xi-dev_XID_00)ID2003803250DB10535090330849072702End; Version=1; Domain=89.0.30.150; Path=/
Set-Cookie: saplb_*=(xi-dev_XID_00)5198450; Version=1; Path=/
Server: SAP J2EE Engine/7.00
Content-Type: text/xml; charset=utf-8
Date: Fri, 16 Jan 2009 00:57:14 GMT
Connection: close
<?xml version='1.0'?>

<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'>
<SOAP:Body>
    <SOAP:Fault>
      <faultcode>SOAP:Server</faultcode>
      <faultstring>Server Error</faultstring>
      <detail>
        <s:SystemError xmlns:s='http://sap.com/xi/WebService/xi2.0'>
          <context>XIAdapter</context>
          <code>ADAPTER.JAVA_EXCEPTION</code>
          <text><![CDATA[
com.sap.aii.af.service.administration.api.cpa.CPAChannelStoppedException: Channel stopped by administrative task.
     at com.sap.aii.af.service.administration.impl.cpa.CommonCPA.checkChannelState(CommonCPA.java:67)
     at com.sap.aii.af.service.administration.impl.cpa.LookupManagerDelegate.getCPAObject(LookupManagerDelegate.java:83)
     at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.setup(XISOAPAdapterBean.java:227)
     at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:689)
     at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_3.process(ModuleLocalLocalObjectImpl0_3.java:103)
     at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:292)
     at com.sap.aii.af.mp.processor.M
In XI SOAP sender communication channel, it is showing as below in communication channel.
16/01/09   error occured
16/01/09   request received
Can anyone pls let me know what might be the problem.
Thanks
Seema.

Hi seema,
I hope you would be knownig that IDOC is Asynch.(well this has nothing to do with question).
Just stop and start your SOAP channel from RWB.
Thanks
Sunil Singh

Channel stopped by administrative task.

Hi dear experts,
I got following error in message:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIAdapterFramework:GENERAL:com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.service.administration.api.cpa.CPAChannelStoppedException: Channel stopped by administrative task.
Current state:
1. Communication channel where error appears is Active in Integration Directory.
2. CPACache full refresh, SLD Cachere fresh doesn't help.
3. Channel in RWB says that "Channel is running but has errors".
4. STOP/START of channel helps only till time when first message is comming, than again same error is comming up.
Any ideas how to make it running?
Marek

Hi,
@Greg: I tried Re-activate (InactiveActivate, ActiveActivate), but without success.
@Krishna: Simple RFC communication channel.
Before this error appeared there was another problem.. That's also only error in Adapter Log..
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.adapter.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.adapter.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=******* GROUP=SPACE R3NAME=*** MSSERV=**** PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '******' not reached TIME Sat Feb 11 20:37:49 201 RELEASE 710 COMPONENT NI (network interface) VERSION 39 RC -10 MODULE nixxi.cpp LINE 3147 DETAIL NiPConnect2: ***** SYSTEM CALL connect ERRNO 79 ERRNO TEXT A remote host refused an attempted connect operation. COUNTER 5
After basis has done additional configuration (some SAP Note), restart of communication channel was successful, but new error came.. Actual one..

Error in SOAP sender CC. Channel stopped by administrative task.

I am getting an error in my SOAP sender communication chanel as follows;
com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Channel stopped by administrative task.
The channel is Active but still gets the same error. Any help would be appriciated.

RWB ---> Component Monitoring ---> Adapter Engine ---> Communication Channel Monitoring ---> Choose your CC and check its properties....check if it shows Channel Stopped...if yes then restart it.
Channel should be Active in ID and Started in RWB to work properly.
Regards,
Abhishek.

All Communication Channels stopped or startet when restart of the SAP-PI

is there any way to control the Communication Channels (to be startet or to be stopped during the next SAP-PI system start) while the SAP-PI is not running.
for a special data migration reason, we have stopped all Communication Channels except one Comm.channel.
after finishing the migration and for a backup, we shut down the SAP-PI system.
for the next SAP-PI system start, all of the Communication Channels should be run again.
is there any way to control (to be startet again for the next SAP-PI system start) the Communication Channels while the SAP-PI system is already shut down
or is the only possible way to start the SAP-PI system, and then manually start the needed Communication Channels.

Hi,
If you bring PI server down then all the channels will automatically stop and you can not control these channels when the server is down.You can again start these channels when the server is up and running.....
Regards,
Naveen

File Sender channel stopped polling on FTP site

Dear all,
We have many file to Idoc interfaces running in production and all are they good.
Yesterday we faced one issue, one of the interface's sender communication channel stopped polling and didn't picked the files from FTP.
There was no error on communication channel monitoring and it is green.
We stopped & started the channel then started picking the files. But this is not usual behavior of file adapter.
We found one SAP Note 1083488, according to this note, we are in the latest SP level( PI 7.0 SP 14). So not required to apply this patch my case.
What should i do to not to face next time
Regards

Hi Bhavana,
Check the below Q & A.....
>> Q: After configuring a large amount of File Adapter sender channels, the J2EE Engine becomes very slow and some services start to block. How can I solve this issue?
A: Up to and including XI 3.0 SP13 each File Adapter sender channel permanently consumes a J2EE application thread. To solve this issue, increase the number of configured J2EE application threads using the SAP J2EE Engine Config Tool ("cluster-data" -> "Global server configuration" -> "managers" -> "ApplicationThreadManager" -> "MaxThreadCount").
Starting with XI 3.0 SP14 / PI 7.0 application threads are allocated on demand by the File Adapter and returned to the thread pool after it has finished the polling sequence, so thread shortage situations will typically occur much more rarely than with earlier SPs.
Also as said by Other SDN'ers check the locks.
Thanks,

What are the data target administration tasks?

What are the data target administration tasks?

Hi,
Check this:-------
Urgent: Relevant Master Data Data Sources for FI-GL & FI-AP
http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
Regards,
Suman
Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM

Programmatically detect a PI channel stopped in RWB

Hello,
Does anybody know a way to programmatically detect a PI channel stopped in RWB?
Thanks,
Shawn

Hi,
To control communication channels externally, you use an HTTP GET or POST request to the following URL:
http(s)://host:port/AdapterFramework/ChannelAdminServlet?party=party&service=service&channel=channel&action=action
See this wiki,
http://wiki.sdn.sap.com/wiki/display/XI/ExternallyControllingtheCommunicationChannel
http://help.sap.com/saphelp_nwpi711/helpdata/en/45/0c86aab4d14dece10000000a11466f/content.htm
You can easily control comm channel through external control.
Please refer the HELP.SAP material on this.
In RWB you need to enable external control on communication channel.
http://help.sap.com/saphelp_nwpi71/helpdata/en/45/0c86aab4d14dece10000000a11466f/content.htm
To control communication channels externally, you use an HTTP GET or POST request to the following URL:
http(s)://host:port/AdapterFramework/ChannelAdminServlet?party=party&service=service&channel=channel&action=action
The XML structure of the HTTP response is documented in a document type definition (DTD) and an XML schema definition (XSD). You can call this information using HTTP at the following addresses:
● http(s)://host:port/AdapterFramework/channelAdmin/ChannelAdmin.dtd
● http(s)://host:port/AdapterFramework/channelAdmin/ChannelAdmin.xsd
You can try this through internet explorer also
http(s)://host:port/AdapterFramework/ChannelAdminServlet?party=party&service=service&channel=channel&action=action

Sender JDBC channel stop send messages

Hi,
We have a sender JDBC scenario which is working correctly time ago.
However, sometimes this channel stop sending messages although the Adapter Monitor shows that they regularly execute the polling interval.
We have confirmed that there isn't any connection from XI to target BD.
In other ocasions, we are required to restart XI and, after that, this scenario works without any problem.
What could be the cause?
How to solve it?
thanks, in advance
Carme

This is rather strange.
A few of my observations -
1. When the sender jdbc adapter polls , and there is no data matching the select query, you will still see a message id in Comm Channel Monitoring but with no hyper link.
2. The actual message id / message is created only if there is data in the database and also the hyper link is enabled.
3. If you are confident that the data is being commited on the database and that it is XI not pulling the right data, one issue might be - driver issues. Can you check if you have the right compatible drivers for your database on XI server - is there a new'er driver available?
We hit a similar issue with JMS adapters and we learnt that the JMS server had been updated as a result of which a new driver had to be installed which we did not until we hit intermittent problems like these.
Hope this helps
Regards
Bhavesh

How to stop print job in SAP?

Can some help in explaining how to stop print job in SAP .???
i

HI Swati,
Thanks for the additional info. as per previously mentioned use SM37 - however be sure to check the box ''Sched' when performing the search for the job in question (and untick the others so the resulting list will be clearer to read etc.)
You can then choose to delete the job and reschedule it to different periods via SM36
Best of luck,
Rgds, Derrick

JDBC and FTP sender channels stop polling

Hi,
We have a great volume of sender JDBC and FTP sender channels.
For this reason there is nothing unusual to have temporary error connections.
Several months ago, with an XI 3.0 system, sender channels recover its functionality automatically when temporary error connection is solved.
But now, he have migrate to a PI 7.1 sytem, and in the same scenario and configuration, sender channel stop polling after a temporary error . In cc monitor this channels remains in green status and there were no signs of stopped interfaces.
Timeouts are correctly defined and there is no difference between channel configuration in our Xi and PI system.
How to solve this problem?
Thanks, in advance.
Carme.

Thanks for your fast response, Stefan.
After writing this post, i ask the same question to our basis team and we are in the latest sp.
¿do you know if there is any note or can you provide me some additional information?
I'm not able to find any note about this issue...
Regards,
Carme.

How to remove channel from DAQmx create Task.vi

Vikas H. Kumthekar
ASE
Tata Consultancy Services
Pune-1

How are you using the DAQmx Create Task.vi? Are you using it to include a global channel or copy a task that was previously created in Measurement and Automation Explorer (MAX)? If this is the case the only way to remove a channel would be to delete the global channel or modify the physical channels for that task in MAX. If you are creating a new task you can use the DAQmx Create Channel.vi to specify the physical channels that you would like to include or exclude.
Regards,
Andy F.
Applications Engineer
National Instruments
National Instruments

Netweaver administration and SAP Web Application Server r the same?

Hi All,
I am a Basis Consultant & new to Netweaver,..
I am interested in Netweaver administration..
1.I am confused wheather netweaver administration and SAP Web Application Server r the same?(or WAS is just another component of Netweaver).
2.Do we need to administrate all the components of Netweaver(EP,BI,etc.,)seperately as an Netweaver Administrator?
Thanks in Advance ,
Malti

Hi Malti,
You must first download and read this document and then read 'help.sap.com' for what is netweaver.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1515a37-0301-0010-b2bb-99780cb4cafa">Introduction to Web Application Server</a>
The above mentioned document is a crisp guide to what is WAS.
Further I got this from the sdn/netweaver webpage
SAP NetWeaver is a web-based, open integration and application platform that serves as the foundation for enterprise service-oriented architecture (enterprise SOA) and allows the integration and alignment of people, information, and business processes across business and technology boundaries. It utilizes open standards to enable integration with information and applications from almost any source or technology. SAP NetWeaver is the foundation of SAP xApps and mySAP Business Suite solutions, and also powers partner solutions and customer custom-built applications.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/netweaver">SAP Netweaver SDN Page</a>
You have lots of reading to do now.. hope that helps
Regards,
Siddhesh

Does OEM 12c supports for performing administration tasks on Oracle SOA Suite 10.1.3.5 environment ??

Hello Everyone,
I would like to start a discussion on the OEM 12c see if anyone has used for SOA Suite 10g. We are currently running on Oracle SOA Suite 10.1.3.5 we want to make use of OEM 12c for monitoring and perform administration activities. I have gone through some Oracle documents for OEM 12c,I found it's supported up to 10.1.3.4.However I am not so sure so I just wanted to clarify on this.
Can we install the client in Oracle Application Server/SOA OC4J container to perform any administration task,purging,patching,monitor interfaces etc.
I look forward to your valuable input and feedback on the discussion.
Best Regards,

Hi,
The zip p6511843_101330_Generic.zip contains a README.txt which explains the steps to be followed to apply this patch.
In the README.txt
Refer to Section2 point No.1.
Get the latest Opatch from metalink for bug 2617419.[this zip will contain a Opatch Directory].Extract this zip into your Oracle SOA home.[ex: C:/product/101.3.1/OracleAS_1]
Also make sure that the Opatch directory in set in the path.
Since we are running this Opatch on a Basic SOA installtion , you don't have to execute the changeNamesWindows.pl script[make sure that you have installed Basic version of SOA and not the Advanced].
This patch will not work on Advanced Install.
You can directly excute
opatch apply.
Follow the remaining steps mentioned in README.txt.
Thanks
Hot-Plug Team

CPAChannelStoppedException: Channel stopped by administrative task (SAP XI)

Similar Messages

Maybe you are looking for