CPAN - "No rule to make target ..."

I'm trying to install perl modules using CPAN on Snow Leopard Server. Regardless of what I attempt to install, I get the error:
No rule to make target `/System/Library/Perl/5.10.0/darwin-thread-multi-2level/CORE/config.h', needed by `Makefile'. Stop.
It seems this means that I need the Perl header files. Where can I get/how can I install these files?
Thanks in advance for any assistance you can offer - I'm a newbie at using CPAN.

lisfolks wrote:
Oh, and is there a particular order in which the .pkg files should be installed?
You shouldn't pick and choose anything in Xcode. Just install it all with the default options.
Unfortunately, I don't think I can help much. I use Perl mostly on Linux.
Also, you are using Snow Leopard Server. Perhaps Perl is installed in a different location. That seems unlikely, though. What directories do you have /System/Library/Perl? If your Perl install is incorrect, Xcode isn't going to help. The files you are missing are part of the OS install, not Xcode.

Similar Messages

  • [SOLVED] make: *** No rule to make target `kernelrelease'

    Hi guys! My problem is similar this one Please help a newbie compile a kernel
    I tried to compile kernel 2.6.33.9 by simply copying the PKGBUILD and other files into my workspace. Everything goes well but I cant make a package:
    PKGBUILD:
    pkgdesc="The Linux Kernel and modules with tuxonice support and rt-patchset"
    depends=('coreutils' 'linux-firmware' 'module-init-tools>=3.16' 'mkinitcpio>=0,7')
    optdepends=('crda: to set the correct wireless channels of your country')
    pkgname=linux-rt-ice
    backup=(etc/mkinitcpio.d/$pkgname.preset)
    _kernelname=${pkgname#linux}
    _basekernel=2.6.33
    pkgver=${_basekernel}.9
    #pkgver=${_basekernel}
    pkgrel=1
    arch=('i686' 'x86_64')
    url="https://rt.wiki.kernel.org"
    license=('GPL2')
    install=$pkgname.install
    provides=('kernel26-rt-ice')
    conflicts=('kernel26-rt-ice')
    replaces=('kernel26-rt-ice')
    makedepends=('xmlto' 'docbook-xsl')
    options=('!strip')
    ### User/Environment defined variables
    enable_toi=${enable_toi:-0}
    BFQ_IO_SCHEDULER="y"
    bfs_scheduler=${bfs_scheduler:-0}
    keep_source_code=${keep_source_code:-1}
    gconfig=${gconfig:-0}
    xconfig=${xconfig:-0}
    menuconfig=${menuconfig:-1}
    realtime_patch=${realtime_patch:-1}
    local_patch_dir="${local_patch_dir:-}"
    use_config="${use_config:-}"
    use_config_gz=${use_config_gz:-0}
    enable_reiser4=${enable_reiser4:-1}
    ### Compile time defined variables
    ### Files / Versions
    #!file_rt="patch-3.0.14-rt31.patch.gz"
    #!file_reiser4="reiser4-for-2.6.31.patch.bz2"
    #file_toi="current-tuxonice-for-3.0.patch.bz2"
    #file_bfs="2.6.38.3-sched-bfs-401.patch"
    file_rt="patch-2.6.33.9-rt31.gz"
    file_reiser4="reiser4-for-2.6.33.patch.gz"
    file_bfs="2.6.33.7-sched-bfs-357.patch"
    _bfqpath="http://algo.ing.unimo.it/people/paolo/disk_sched/patches/2.6.33/"
    source=("ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-${_basekernel}.tar.bz2"
    "ftp://ftp.kernel.org/pub/linux/kernel/v2.6/longterm/v2.6.33/patch-2.6.33.9.gz"
    http://www.kernel.org/pub/linux/kernel/projects/rt/2.6.33/patch-2.6.33.9-rt31.gz
    # https://tglx.de/~tglx/rt/3.0/${file_rt}
    http://sourceforge.net/projects/reiser4/files/reiser4-for-linux-2.6/reiser4-for-2.6.33.patch.gz
    #http://www.tuxonice.net/files/${file_toi}
    http://ck.kolivas.org/patches/bfs/${_basekernel}/${file_bfs}
    # the main kernel config files
    'config' 'config.x86_64'
    # standard config files for mkinitcpio ramdisk
    "${pkgname}.preset"
    'change-default-console-loglevel.patch'
    'i915-fix-ghost-tv-output.patch'
    #BFQ patch:
    "${_bfqpath}/0001-bfq_iosched-block-prepare_IO_context_code-v1-r1.patch"
    "${_bfqpath}/0002-bfq_iosched-block-add_cgroups_kconfig_and_build_bits-v1-r1.patch"
    "${_bfqpath}/0003-bfq_iosched-block-introduce_BFQ-v1-r1.patch")
    md5sums=('c3883760b18d50e8d78819c54d579b00'
    '6594052b26f8e79c374c278f62d3329b'
    '772776957913e76492e3547b304b75c2'
    '96f986418d1ab9b9abdcbfb2c20fdc0d'
    '3b8ef39f43a1dab60ddc703049cb8ac2'
    '540318683b69e49ab5fa629cfb32dc48'
    '74d172143d448a002834879d99c3992c'
    '7c9725208ab6834602c8b9d645ed001d'
    '9d3c56a4b999c8bfbd4018089a62f662'
    '263725f20c0b9eb9c353040792d644e5'
    '69adc7f64f4dc5b34ad1cb3825b7c0f4'
    '4146ee711eed553c024a93c766463583'
    '678c791c7df57a71cdb480fdc49aec8d')
    build() {
    cd "${srcdir}/linux-${_basekernel}"
    # add upstream patch
    patch -p1 -i "${srcdir}/patch-${pkgver}"
    if [ -n "${local_patch_dir}" ] && [ -d "${local_patch_dir}" ] ; then
    echo "Applying patches from ${local_patch_dir} ..."
    for my_patch in "${local_patch_dir}"/* ; do
    echo -e "Applying custom patch:\t'${my_patch}'" || true
    patch -Np1 -i "${my_patch}" || { echo -e "Failed custom patch:\t'${my_patch}'" ; return 1 ; }
    done
    fi
    # Applying realtime patch
    if [ "$realtime_patch" = "1" ]; then
    echo "Applying real time patch"
    # Strip './Makefile' changes
    gzip -dc ${srcdir}/${file_rt} \
    | sed '/diff --git a\/Makefile b\/Makefile/,/*DOCUMENTATION*/d' \
    | patch -Np1 || { echo "Failed Realtime patch '${file_rt}'"; return 1 ; }
    fi
    # applying reiserfs4 patch
    if [ "$enable_reiser4" = "1" ]; then
    echo "Applying ${file_reiser4%.gz}"
    gzip -dc ${srcdir}/${file_reiser4} | patch -Np1 || { echo "Failed reiser4 patch '${file_reiser4%.gz}'"; return 1 ; }
    fi
    # applying tuxonice patch
    if [ "${enable_toi}" = "1" ]; then
    echo "Applying ${file_toi%.bz2}"
    # fix to tuxonice patch to work with rt
    #if [ "$realtime_patch" = "1" ]; then
    #bzip2 -dck ${srcdir}/${file_toi} \
    #| sed '/diff --git a\/kernel\/fork.c b\/kernel\/fork.c/,/{/d' \
    #| sed 's/printk(KERN_INFO "PM: Creating hibernation image:\\n/printk(KERN_INFO "PM: Creating hibernation image: \\n/' \
    #| patch -Np1 || { echo "Failed TOI w/rt" ; return 1 ; }
    #else
    bzip2 -dck ${srcdir}/${file_toi} \
    | sed 's/printk(KERN_INFO "PM: Creating hibernation image:\\n/printk(KERN_INFO "PM: Creating hibernation image: \\n/' \
    | patch -Np1 -F4 || { echo "Failed TOI"; return 1 ; }
    #fi
    fi
    if [ "${bfs_scheduler}" = "1" ] && [ "${realtime_patch}" = "0" ]; then
    # applying BFS scheduler patch
    echo "BFS scheduler patch not available yet, sorry"
    # echo "Applying BFS scheduler patch"
    # patch -Np1 -i ${srcdir}/${file_bfs} || { echo "Failed BFS"; return 1 ; }
    fi
    # --> BFQ
    if [ $BFQ_IO_SCHEDULER = "y" ] ; then
    msg "Patching source with BFQ patches"
    for i in $(ls ${srcdir}/000*.patch); do
    patch -Np1 -i $i
    done
    fi
    # Some chips detect a ghost TV output
    # mailing list discussion: http://lists.freedesktop.org/archives/intel-gfx/2011-April/010371.html
    # Arch Linux bug report: FS#19234
    # It is unclear why this patch wasn't merged upstream, it was accepted,
    # then dropped because the reasoning was unclear. However, it is clearly
    # needed.
    #patch -Np1 -i "${srcdir}/i915-fix-ghost-tv-output.patch"
    # set DEFAULT_CONSOLE_LOGLEVEL to 4 (same value as the 'quiet' kernel param)
    # remove this when a Kconfig knob is made available by upstream
    # (relevant patch sent upstream: https://lkml.org/lkml/2011/7/26/227)
    patch -Np1 -i "${srcdir}/change-default-console-loglevel.patch"
    if [ "${CARCH}" = "x86_64" ]; then
    cat "${srcdir}/config.x86_64" > ./.config
    else
    cat "${srcdir}/config" > ./.config
    fi
    # use custom config instead
    if [ -n "${use_config}" ] ; then
    echo "Using config: '${use_config}'"
    cat "${use_config}" > ./.config
    make oldconfig
    fi
    # use existing config.gz
    if [ "$use_config_gz" = "1" ]; then
    zcat /proc/config.gz > ./.config
    make oldconfig
    fi
    if [ "${_kernelname}" != "" ]; then
    sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config
    fi
    # set extraversion to pkgrel
    sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile
    # hack to prevent output kernel from being marked as dirty or git
    #chmod +x ${srcdir}/linux-${_basekernel}/scripts/setlocalversion
    #sed 's/head=`git rev-parse --verify --short HEAD 2>\/dev\/null`/0/' \
    # ${srcdir}/linux-${_basekernel}/scripts/setlocalversion \
    # > ${srcdir}/linux-${_basekernel}/scripts/setlocalversion.new
    #mv ${srcdir}/linux-${_basekernel}/scripts/setlocalversion.new \
    # ${srcdir}/linux-${_basekernel}/scripts/setlocalversion
    # get kernel version
    make prepare
    # load configuration
    # Configure the kernel. Replace the line below with one of your choice.
    if [ "$gconfig" = "1" ]; then
    make gconfig
    else
    if [ "$xconfig" = "1" ]; then
    make xconfig
    else
    if [ "$menuconfig" = "1" ]; then
    make menuconfig
    fi
    fi
    fi
    yes "" | make config
    make prepare # Necessary in case config has been changed
    # build!
    make ${MAKEFLAGS} bzImage modules
    package_linux-rt-ice() {
    KARCH=x86
    cd ${srcdir}/linux-${_basekernel}
    if [ "$keep_source_code" = "1" ]; then
    echo -n "Copying source code..."
    # Keep the source code
    cd $startdir
    mkdir -p $pkgdir/usr/src || return 1
    cp -a ${srcdir}/linux-${_basekernel} $pkgdir/usr/src/linux-${_kernver} || return 1
    #Add a link from the modules directory
    mkdir -p $pkgdir/lib/modules/${_kernver} || return 1
    cd $pkgdir/lib/modules/${_kernver} || return 1
    rm -f source
    ln -s ../../../usr/src/linux-${_kernver} source || return 1
    echo "OK"
    fi
    # get kernel version
    _kernver="$(make kernelrelease)"
    mkdir -p "${pkgdir}"/{lib/modules,lib/firmware,boot}
    make INSTALL_MOD_PATH="${pkgdir}" modules_install
    cp arch/$KARCH/boot/bzImage "${pkgdir}/boot/vmlinuz-${pkgname}"
    # add vmlinux
    install -D -m644 vmlinux "${pkgdir}/usr/src/linux-${_kernver}/vmlinux"
    # install fallback mkinitcpio.conf file and preset file for kernel
    install -D -m644 "${srcdir}/${pkgname}.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset"
    # set correct depmod command for install
    sed \
    -e "s/KERNEL_NAME=.*/KERNEL_NAME=${_kernelname}/g" \
    -e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/g" \
    -i "${startdir}/${pkgname}.install"
    sed \
    -e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-${pkgname}\"|g" \
    -e "s|default_image=.*|default_image=\"/boot/initramfs-${pkgname}.img\"|g" \
    -e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-${pkgname}-fallback.img\"|g" \
    -i "${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset"
    echo -e "# DO NOT EDIT THIS FILE\nALL_kver='${_kernver}'" > ${pkgdir}/etc/mkinitcpio.d/${pkgname}.kver
    # remove build and source links
    rm -f "${pkgdir}"/lib/modules/${_kernver}/{source,build}
    # remove the firmware
    rm -rf "${pkgdir}/lib/firmware"
    # gzip -9 all modules to save 100MB of space
    find "${pkgdir}" -name '*.ko' -exec gzip -9 {} \;
    # make room for external modules
    ln -s "../extramodules-${_basekernel}${_kernelname:--rt-ice}" "${pkgdir}/lib/modules/${_kernver}/extramodules"
    # add real version for building modules and running depmod from post_install/upgrade
    mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--rt-ice}"
    echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--rt-ice}/version"
    mkdir -p "${pkgdir}/lib/modules/${_kernver}"
    cd "${pkgdir}/lib/modules/${_kernver}"
    ln -sf ../../../usr/src/linux-${_kernver} build
    cd "${srcdir}/linux-${_basekernel}"
    install -D -m644 Makefile \
    "${pkgdir}/usr/src/linux-${_kernver}/Makefile"
    install -D -m644 kernel/Makefile \
    "${pkgdir}/usr/src/linux-${_kernver}/kernel/Makefile"
    install -D -m644 .config \
    "${pkgdir}/usr/src/linux-${_kernver}/.config"
    mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/include"
    for i in acpi asm-generic config crypto drm generated linux math-emu \
    media net pcmcia scsi sound trace video xen; do
    cp -a include/${i} "${pkgdir}/usr/src/linux-${_kernver}/include/"
    done
    # copy arch includes for external modules
    mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/arch/x86"
    cp -a arch/x86/include "${pkgdir}/usr/src/linux-${_kernver}/arch/x86/"
    # copy files necessary for later builds, like nvidia and vmware
    cp Module.symvers "${pkgdir}/usr/src/linux-${_kernver}"
    cp -a scripts "${pkgdir}/usr/src/linux-${_kernver}"
    # fix permissions on scripts dir
    chmod og-w -R "${pkgdir}/usr/src/linux-${_kernver}/scripts"
    mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/.tmp_versions"
    mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/kernel"
    cp arch/${KARCH}/Makefile "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/"
    if [ "${CARCH}" = "i686" ]; then
    cp arch/${KARCH}/Makefile_32.cpu "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/"
    fi
    cp arch/${KARCH}/kernel/asm-offsets.s "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/kernel/"
    # add headers for lirc package
    mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video"
    cp drivers/media/video/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video/"
    for i in bt8xx cpia2 cx25840 cx88 em28xx et61x251 pwc saa7134 sn9c102; do
    mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video/${i}"
    cp -a drivers/media/video/${i}/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video/${i}"
    done
    # add docbook makefile
    install -D -m644 Documentation/DocBook/Makefile \
    "${pkgdir}/usr/src/linux-${_kernver}/Documentation/DocBook/Makefile"
    # add dm headers
    mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/md"
    cp drivers/md/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/md"
    # add inotify.h
    mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/include/linux"
    cp include/linux/inotify.h "${pkgdir}/usr/src/linux-${_kernver}/include/linux/"
    # add wireless headers
    mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/"
    cp net/mac80211/*.h "${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/"
    # add dvb headers for external modules
    # in reference to:
    # http://bugs.archlinux.org/task/9912
    mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/dvb-core"
    cp drivers/media/dvb/dvb-core/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/dvb-core/"
    # and...
    # http://bugs.archlinux.org/task/11194
    #mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/"
    #cp include/config/dvb/*.h "${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/"
    # add dvb headers for http://mcentral.de/hg/~mrec/em28xx-new
    # in reference to:
    # http://bugs.archlinux.org/task/13146
    mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends/"
    cp drivers/media/dvb/frontends/lgdt330x.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends/"
    cp drivers/media/video/msp3400-driver.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends/"
    # add dvb headers
    # in reference to:
    # http://bugs.archlinux.org/task/20402
    mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/dvb-usb"
    cp drivers/media/dvb/dvb-usb/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/dvb-usb/"
    mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends"
    cp drivers/media/dvb/frontends/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends/"
    mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/common/tuners"
    cp drivers/media/common/tuners/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/common/tuners/"
    # add xfs and shmem for aufs building
    mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/fs/xfs"
    mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/mm"
    cp fs/xfs/xfs_sb.h "${pkgdir}/usr/src/linux-${_kernver}/fs/xfs/xfs_sb.h"
    # copy in Kconfig files
    for i in `find . -name "Kconfig*"`; do
    mkdir -p "${pkgdir}"/usr/src/linux-${_kernver}/`echo ${i} | sed 's|/Kconfig.*||'`
    cp ${i} "${pkgdir}/usr/src/linux-${_kernver}/${i}"
    done
    chown -R root.root "${pkgdir}/usr/src/linux-${_kernver}"
    find "${pkgdir}/usr/src/linux-${_kernver}" -type d -exec chmod 755 {} \;
    # strip scripts directory
    find "${pkgdir}/usr/src/linux-${_kernver}/scripts" -type f -perm -u+w 2>/dev/null | while read binary ; do
    case "$(file -bi "${binary}")" in
    *application/x-sharedlib*) # Libraries (.so)
    /usr/bin/strip ${STRIP_SHARED} "${binary}";;
    *application/x-archive*) # Libraries (.a)
    /usr/bin/strip ${STRIP_STATIC} "${binary}";;
    *application/x-executable*) # Binaries
    /usr/bin/strip ${STRIP_BINARIES} "${binary}";;
    esac
    done
    # remove unneeded architectures
    if [ "$keep_source_code" = "0" ]; then
    rm -rf ${pkgdir}/usr/src/linux-${_kernver}/arch/{alpha,arm,arm26,avr32,blackfin,cris,frv,h8300,ia64,m32r,m68k,m68knommu,mips,microblaze,mn10300,parisc,powerpc,ppc,s390,sh,sh64,sparc,sparc64,um,v850,xtensa}
    fi
    [ku@ku-la linux-rt-ice]$ makepkg -R
    ==> Making package: linux-rt-ice 2.6.33.9-1 (Sat Jan 21 13:33:09 NOVT 2012)
    ==> Removing existing pkg/ directory...
    ==> Entering fakeroot environment...
    ==> Starting package_linux-rt-ice()...
    Copying source code...OK
    make: *** No rule to make target `kernelrelease'. Stop.
    ==> ERROR: A failure occurred in package_linux-rt-ice().
    Aborting...
    I remounted it with defaults options as stressed above topic and try again makepkg -R but still no joy
    I looked at kernel.release
    2.6.33-1-rt-ice
    Any ideas?
    Last edited by noMaster (2012-01-21 15:35:54)

    I suggested to build package again. And finally I got it. I guess the problem was in mounting options so was needed to began from the very start

  • Relinking forms executables results in "No rule to make target"

    In the course of installing Forms 11.1.1.4 on weblogic 11gR1 (10.3.4), I ran into an issue after installing patch p9473270 (refer to Oracle Doc ID 1276725.1). The ERP system vendor recommends relinking the forms executables after applying this patch with the following commands:
    Relink the Oracle forms binaries:
    cd $ORACLE_HOME/forms/lib
    make -f ins_forms.mk frmcmp_install
    make –f ins_forms.mk frmbld_install
    make –f ins_forms.mk frmcmpb_install
    make –f ins_forms.mk frmweb_install
    The second command resulted in an error:
    $ make –f ins_forms.mk frmbld_install
    make: *** No rule to make target `–f'. Stop.
    After researching this issue, I tried the following command :
    $ relink forms
    This successfully relinked all forms executables.
    -rwx------ 1 oracle dba 12510433 Jan 20 20:11 frmcmp
    -rwx------ 1 oracle dba 20547 Jan 20 20:11 frmctrl
    -rwx------ 1 oracle dba 13721638 Jan 20 20:11 frmcmp_batch
    -rwx------ 1 oracle dba 12510975 Jan 20 20:11 frmbld
    -rwx------ 1 oracle dba 15275747 Jan 20 20:11 frmweb
    Any thoughts on the usage of "relink forms" vs. the make command? Or why I was encountering the error " No rule to make target"?
    Bill

    Hi,
    Please see {thread:id=2426792}, appears that 11gR2 is not certified on Linux 6.
    Cheers,

  • "No rule to make target" when compiling a C++ program under Winelib

    I'm trying to compile a C++ program for Windows using Winelib, and it keeps exiting without doing anything with this message:
    make: *** No rule to make target `windows.so', needed by `all'.  Stop.
    I don't think there's anything anywhere in the code or the makefile about "windows.so"... What is this about?

    You're going to have to provide way more information - what does your project look like? Where did you get it? Did you write the makefile yourself?

  • Rebuilding Qt4 - No rule to make target..

    Hello!
    I want to make an edit to one source file in qt4 from ABS. - it is gui/kernel/qclipboard_x11.cpp.
    There's a 10.000 ms timeout, and I need to change it to something smaller, maybe 1.000 ms.
    (It defines how long I have to wait after closing Okular, before I can start another instance. I tried to google a better solution, but there's no useful info.).
    I've added a sed command to the PKGBUILD that does it, started the build, and it crashed with this:
    make[1]: *** No rule to make target 'util/qabstractsystemtrayiconsys.cpp', needed by '.obj/release-shared/qabstractsystemtrayiconsys.o'. Stop.
    make[1]: *** Waiting for unfinished jobs....
    moc util/qcompleter.h
    moc graphicsview/qgraphicswidget.h
    make[1]: Leaving directory '/home/ondra/tmp/abs/src/qt-everywhere-opensource-src-4.8.6/src/gui'
    Makefile:423: recipe for target 'sub-gui-make_default-ordered' failed
    make: *** [sub-gui-make_default-ordered] Error 2
    ==> ERROR: A failure occurred in build().
    Aborting...
    Also, I'm not too happy with having to rebuild the entire Qt, but maybe that's the only way to get my changes working.
    Any idea how to fix this error?
    For more details, the entire log from this failed build can be found here: http://pastebin.com/knkd3dA8
    Last edited by MightyPork (2014-12-21 18:33:57)

    You're going to have to provide way more information - what does your project look like? Where did you get it? Did you write the makefile yourself?

  • Error : ***no rule to make target all

    Hi,
    When I build my project in Qnx  i encounter this error:
    *** No rule to make target all
    *** No rule to make target clean
     it's an immediate question .please help me
    thanks.
    Message Edited by zamin on 09-03-2007 04:02 AM

    Hi zamin-
    Are you using the Makefile supplied with the MHDDK examples?  Which examples are you trying to build?  Are you attempting to build using 'make' from the command line, or from some sort of QNX development environment?  If you are building from the command line, which directory are you in when you run 'make'?
    Thanks-
    Tom W
    National Instruments

  • Make problem: no rule to make target modules

    i have dell xps 15z laptop with 64bit arch installed. i would like to install bbswitch, so i can use the optimus nvidia card. I downloaded from AUR the makefile and run makepkg. I got this error that i cannotfind out what is causing:
    ==> Starting build()...
    make -C /lib/modules/3.2.8-1-ARCH/build M="$(pwd)" modules
    make[1]: Entering directory `/lib/modules/3.2.8-1-ARCH/build'
    make[1]: *** No rule to make target `modules'.  Stop.
    make[1]: Leaving directory `/lib/modules/3.2.8-1-ARCH/build'
    make: *** [default] Error 2
    ==> ERROR: A failure occurred in build().
        Aborting...
    Can anyone help me please?
    Last edited by Empy (2012-03-04 21:33:07)

    Do you have linux-headers installed?

  • No rule to make target ... ???

    When running makepkg I get the following:
    %makepkg
    ==> Making package: broadcom-wl 5.60.246.6-1 (Fri Dec 17 20:12:35 PST
    2010)
    ==> Checking Runtime Dependencies...
    ==> Checking Buildtime Dependencies...
    ==> Retrieving Sources...
    -> Found hybrid-portsrc_x86-64_v5.60.246.6.tar.gz
    -> Found license.patch
    -> Found semaphore.patch
    ==> Validating source files with sha1sums...
    hybrid-portsrc_x86-64_v5.60.246.6.tar.gz ... Passed
    license.patch ... Passed
    semaphore.patch ... Passed
    ==> Extracting Sources...
    -> Extracting hybrid-portsrc_x86-64_v5.60.246.6.tar.gz with bsdtar
    ==> Removing existing pkg/ directory...
    ==> Starting build()...
    patching file src/wl/sys/wl_linux.c
    patching file src/wl/sys/wl_iw.h
    make: Entering directory `/usr/src/linux-2.6.36-ARCH'
    make: *** No rule to make target `Setup/broadcom-wl/src'. Stop.
    make: Leaving directory `/usr/src/linux-2.6.36-ARCH'
    Aborting...
    I can't figure out how to fix this.  I'm not sure how to enter in a rule nor where to put it.  I've had no issues installing this package in previous versions but for some reason after upgrading the kernel and trying to use the package from the AUR broadcom-wl 5.60.246.6-1 it refuses to work.
    Any ideas?

    mwknowles92, don't cross-post: https://bbs.archlinux.org/viewtopic.php … 78#p867078
    See: https://wiki.archlinux.org/index.php/Fo … ss-Posting
    Closed.

  • Make: *** No rule to make target `main.o', needed by `empty_application_0.elf'. Stop.

    Hi !! I'm programming in sdk 13.1, device : virtex V ml 507, processor microblaze, it shows me this error : 
    make: *** No rule to make target `main.o', needed by `empty_application_0.elf'. Stop.

    I have a similar thing when I run a C Simulation for a OpenCL Kernel for matrix multiplication in Xilinx Vivado High Level Synthesis. My CSim.log is as follows:
    Compiling(apcc) ../../../mat_multi_opencl_test.c in debug mode
    @I [LIC-101] Checked out feature [VIVADO_HLS]
    @I [HLS-10] Running 'f:/Xilinx/Vivado_HLS/2015.1/bin/unwrapped/win64.o/apcc.exe'
    for user 'Pratheeksha' on host 'pratheeksha' (Windows NT_amd64 version 6.2) on Mon Jul 06 12:17:20 +0530 2015
    in directory 'C:/Users/Pratheevivek1/Documents/mat_multi_opencl/solution1/csim/build'
    @I [APCC-3] Tmp directory is apcc_db
    @I [APCC-1] APCC is done.
    @I [LIC-101] Checked in feature [VIVADO_HLS]
    Compiling(apcc) matrix_mult_sdaccel.c in debug mode
    @I [LIC-101] Checked out feature [VIVADO_HLS]
    @I [HLS-10] Running 'f:/Xilinx/Vivado_HLS/2015.1/bin/unwrapped/win64.o/apcc.exe'
    for user 'Pratheeksha' on host 'pratheeksha' (Windows NT_amd64 version 6.2) on Mon Jul 06 12:17:27 +0530 2015
    in directory 'C:/Users/Pratheevivek1/Documents/mat_multi_opencl/solution1/csim/build'
    @I [APCC-3] Tmp directory is apcc_db
    @I [APCC-1] APCC is done.
    @I [LIC-101] Checked in feature [VIVADO_HLS]
    make: *** No rule to make target `tb_stub.c', needed by `obj/tb_stub.o'. Stop.
    @E [SIM-1] CSim file generation failed: compilation error(s).
    What seems to be the error?

  • Fsam7440 makepkg error - no rule to make modules

    Hi there!
    I'm trying to set up a wireless connection on an old Fujitsu Amilo M  7400
    and i'm trying to install the fsam7440 module from the AUR,
    to be able to control the wlan-switch.
    I don't even know if it's gonna work, but it is the only idea i got so far.
    When running makepkg, i get the error
    make: *** /lib/moduels/3.8.4-1ARCH/build: No such file or directory. Stop
    When i create the not-found build folder i get the error
    make[1]: *** No rule to make target `modules'. Stop.
    The package being flagged as "orphaned", i also tried to *make*
    the package provided on the projects page,
    getting the same error messages.
    Any thoughts?
    Thanks in advance!
    Levent

    Last Updated: 2007-05-07 00:29
    Fsam7440 is a module for Linux Kernel 2.4/2.6 that allows change the status of wireless card's radio on Fujitsu-Siemens Amilo M 7440.
    that driver doesn't appear to have had any updates for almost 6 years.
    you could try building 1 of the remaining 2.6 longterm (like 2.6.32.60) kernels from source.

  • Building "xmoniz" patched compiz, no rule to make issue

    I'm following this guide modified with squarehimself/tux_mark_5's tweaks
    I get to step 6 of the original compiz guide
    6. $ make (build)
    7. $ [sudo] make install (install)
    8. $ [sudo] make findcompiz_install
    and get this error:
    "no rule to make target install"
    the contents of ~/compiz/build/ are:
    cmake/ CPackConfig.cmake include/ po/
    CMakeCache.txt CPackSourceConfig.cmake kde/ src/
    CMakeFiles/ generated/ libdecoration/ xslt/
    cmake_uninstall.cmake gtk/ metadata/
    compiz.pc images/ plugins/
    has anyone managed to get this working?

    Don't compile by hand. Modify the compiz-* PKGBUILDs instead. That's what I would do anyway.

  • Get error when trying to make target a single audio track without video

    Error - iLLegal angle situation. Only the main video angle will be simulated".
    From triggering a button on a menu targeted toward an audio only track I get this error during simulation.
    But nothing gets simulated. I know that if I put in video with the audio in the track I won't get this error but should I have to?
    Dave

    Put a clip of black video in the track with the same duration as the audio.
    -DH

  • How to make Target Value field mandatory in WK  contracts

    Dear All,
    Can the Target Value field in quantity contracts be set to a mandatory field like in Value contracts?
    Regards.

    Hi
    quantity contracts are used when you would like to limit quantity irrespective of the value of contract. Therefore quantity field is made mandatory here.
    similarly value contract is used when you would like to limit value irrespective of quantity of goods.Therefore value field is made mandatory here.
    Hope it helps you.

  • Baseline / Make target compliant.

    Hi,
    Just wanted to see if anyone can help out here explaining the cause of the following.
    I have (simple) a test setup with OPSC. (enterprise console + proxy + agent (x86) / agent (sparc) / agent (x86) ) connected-mode through a seperate proxyserver.
    Now whenever is run baselinereports and try to make agents complient against a recommended bundle the (updateprovisioning) job starts out fine, downloading the blobs. However when the pre-process-phase is about to start the agent logging produces the following errors;
    17216:2011-05-10_19:11:31 ERROR [ Server_i: ../src/Server_i.cc: # 395 ] 268634880 HTTP request failed. Reason: Moved temporarily.
    17216:2011-05-10_19:11:48 ERROR [ Server_i: ../src/Server_i.cc: # 395 ] 268634880 HTTP request failed. Reason: Moved temporarily.
    17216:2011-05-10_19:12:05 ERROR [ Server_i: ../src/Server_i.cc: # 395 ] 268634880 HTTP request failed. Reason: Moved temporarily.
    17216:2011-05-10_19:12:21 ERROR [ Server_i: ../src/Server_i.cc: # 395 ] 268634880 HTTP request failed. Reason: Moved temporarily.
    17216:2011-05-10_19:12:38 ERROR [ Server_i: ../src/Server_i.cc: # 395 ] 268634880 HTTP request failed. Reason: Moved temporarily.
    17216:2011-05-10_19:12:54 ERROR [ Server_i: ../src/Server_i.cc: # 395 ] 268634880 HTTP request failed. Reason: Moved temporarily.
    17216:2011-05-10_19:13:11 ERROR [ Server_i: ../src/Server_i.cc: # 395 ] 268634880 HTTP request failed. Reason: Moved temporarily.
    17216:2011-05-10_19:13:21 ERROR [ Server_i: ../src/Server_i.cc: # 709 ] 151068416 Maximum retries has reached. Aborting communication. Context: retry_no=10
    17216:2011-05-10_19:13:21 ERROR [ Server_i: ../src/SI_GetFileManager.cc: # 490 ] 84088320 download.cgi: Download fail: Finger print not match! Unexpected error. Check previous errors and error code for details.
    17216:2011-05-10_19:13:21 WARNING [ default_logger: source_unavailable: #0 ] 0 AResult_action_task_status(): setting error string to Failed to download notification !.
    17216:2011-05-10_19:13:21 ERROR [ default_logger: source_unavailable: #0 ] 117969152 Failed to download notification !
    I can see the blobs are downloaded. The same happens in a simulation run.
    Now the strange thing is that whenever i just select a single patch from the baseline report (marking all the others as blacklisted) the patch gets applied succesfull.
    I'v tried to raise some timeout and retry settings in the uce.rc file but the results stayed the same.
    Any help/tips or tricks appreciated.
    Kind regards
    Patrick

    This is old post, but if possible please try reproduce this issue in the latest version of FEP or System Center Endpoint Protection and check whether problem reproduce or not?

  • Rule RESPOND makes troubles

    Morning.
    I've defined a rule:
    IF HEADER Disposition-Notification-To CONTAINS @
    RESPOND email
    But if an emails matching to the rule contains an attachment Mail.app
    includes into the response the whole attachment. This is not what I
    want.
    I want that into the response instead of the attached file only a line
    <file.ext>
    is included. This is the behaviour when I respond to the email manually.
    And I want to get the same behaviour on automatically responded emails.
    How can I get this behaviour?
    TIA and kind regards, Friedrich

    I forgot to say I tried the 5 r's, called tech support, have been ALL over this forum, and have even asked other nano users I know for tips.

Maybe you are looking for

  • How to delete multiple songs from iPhone 5S without losing form iTunes? The unchek function has not worked. Why?

    How to delete multiple songs from iPhone 5S without losing form iTunes? The unchek function has not worked. Why?

  • CS4 won't display images

    I just finished installing photoshop, and tried to open an image to edit. The image seems to load as there is a tab for it and it is visible in the layers panel, but the area where you edit the photo itself remains grey. any tips? I have updated my v

  • Menu spry bar

    Does anybody know how to modify the spry menus? like changing the background color, the shape, etc. The only thing I figured is how to change to with for the main menu. Is there another way to do drop down menus in DW cs5? Please any help will be gre

  • Itunes disables my cd and dvd-rom

    I just downloaded the latest version of Itunes and it disables my cd and dvd-rom drives. Any idea why that is? I'm using a Dell Dimension 4500.

  • Override navigation buttons for branching slides?

    Hello, I'm developing a lesson in Captivate 5.5 that uses a navigation bar throughout (forward/back arrows, progress bar, etc.); however, I created a branching activity in which I don't want users to be able to navigate using the forward/back arrows.