CPH using solman 3.2

Hi,
I am trying to configure CPH for the first time in my central Solution manager...I used RZ23N and it asked me to activate the CPH..after selecting yes it schedules SAP_CCMS_CPH_REORG job......is there something else to be done I see error when I execute the report.......Any document I tried using SAP Help...
Regards,
Milan

Hello Milan,
at first you could have a look into the document <a href="http://service.sap.com/~sapidb/011000358700000100292003E/CPH620_V11_EN.pdf">Central Performance History of the Monitoring Architecture</a>, especially the tutorial chapters are worth reading when starting with CPH.
If only the SAP_CCMS_CPH_REORG job was scheduled you most probably didn't define any data to be collected, otherwise there should exist also one or more collection jobs (SAP_CCMS_CPH_MINCOLL, SAP_CCMS_CPH_QTRCOLL or SAP_CCMS_CPH_HRCOLL).
And without collected data the reports analyzing the data will fail.
Regards, Michael

Similar Messages

Using Solman to generate EWA, it came dump SYNTAX_EROR

Hi Experts there,
When I used solman 4.0 to generate satellite system which is ERP 2005's EWA, it came dump SYNTAX_ERROR
Syntax error in program "RDSVASAEA_SQL______________034 ".
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "RDSVASAEA_SQL______________034
     " in include "RDSVASIEA_SQL______________034 " in
    line 37:
    "Field "DLD_GLOBALDATA001202" is unknown. It is neither in one of the s"
    "pecified tables nor defined by a "DATA" statement. "DATA" statement. ""
    "DATA" statement."
but this solman to generate EWA from exactly same systems but is DEV and QUA were ok.
please help me and thank you !
Wei Wu

Hi,
Check this, 851621,863546 - It may solve your problem.
Also please provide if you have any other info, full dump report, support pack level.
Feel free to revert back.
--Ragu

Using SolMAn / ChaRm for upgrade to ECC6

Good Day;
We are planning on using SolMan / ChaRm for our upgrade from 4.6C to ECC6 and I am wondering if it would be possible to do the following
Upgrade a development system to ECC6.
Define 2 virtual ECC6 Systems, 1 for the QA system and 1 for the production system
Create a project that contains all the business processes and has the above landscape assigned. This project does not have ChaRM active.
Create a maintenance cycle with the above landscape attached and ChaRM active.
As we upgrade the real QA and production systems to ECC6, we want to u201Cflip outu201D the virtual systems for the u201Crealu201D ECC6 systems.
Does anyone have any input in this type of plan?
Regards
Don

Good Day;
We are planning on using SolMan / ChaRm for our upgrade from 4.6C to ECC6 and I am wondering if it would be possible to do the following
Upgrade a development system to ECC6.
Define 2 virtual ECC6 Systems, 1 for the QA system and 1 for the production system
Create a project that contains all the business processes and has the above landscape assigned. This project does not have ChaRM active.
Create a maintenance cycle with the above landscape attached and ChaRM active.
As we upgrade the real QA and production systems to ECC6, we want to u201Cflip outu201D the virtual systems for the u201Crealu201D ECC6 systems.
Does anyone have any input in this type of plan?
Regards
Don

How to approve the packages using solman

Hi Friends
I have Installed a Solution manager 7.0 version.
Now for my scenaris I have to download packages from SMP ERP stack 11 for ECC 6.0 system
The packages ask for approval.
How can I configure this by solman system that my packages are downlaoded in ECC system from SMP via solution manager system.
I am using Solman 1st time to downlaod packages.
Thanks and Regards
Pooja

Hi
Have you configured Maintain Optimizer in Solman,this is mandatory if you want to download support pack stack for ECC6 or any other SAP versions
configure the maintenance optimizer in solution manager using the following weblog
/people/issacnolis.ohasi/blog/2008/01/04/upgrade-sessions-whats-sap-solution-manager-maitenance-optimizer
Also check note:1024932 & 1032322
If you have already configured MO then
Log on to your SAP Solution Manager system and start transaction DSWP (or SOLUTION_MANAGER). In the left frame, select Solution Overview>Then, choose the tab Change Management.>Choose Maintenance Optimizer-->Choose Create New Maintenance Transaction
You need to maintain your S user ID through AISUSER tcode before that.
Then you can directly move files to your download basket, after confirmation
www.service.sap.com/rkt-solman->select solution Manager 7.0>technical Role-->Technolagy
&system administartion just drill out there you can find lot of simulator
Regards
Uday

ASAP Implementation using SOLMAN

HI All,
Can you please guide me if we can implement sap using ASAP methodology in SOLMAN?
In other words can solman be a substitue for ASAP tools and download from CD?Or there is no substitute to ASAP software?
Also guide me if solman can become a part of ASAP methodology if entire ASAP methodology is not possible using SOLMAN and in what phase of ASAP nethodology implementation SOLMAN comes in picture?
Thanks.

Hello,
Solution Manager has the similar functionality as ASAP, though instead of CD based it is Server Based set of tools and it is modern, while ASAP is old.
You should look at SAP Methodologies at this link:
https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000724820&_SCENARIO=01100035870000000202&
Also look at RUN SAP and notice you can use ASAP Roadmaps : https://websmp102.sap-ag.de/~sapidb/011000358700001391212009E/Index.htm
Here is a link to run SAP Roadmaps: https://websmp107.sap-ag.de/~sapidb/011000358700001391212009E/Index.htm
Additionally this issue has already been discussed in thread: Difference between Solution manager and ASAP
Regards,
Paul

How effectively do you use SolMan in SAP ERP Implementation, Upgrade?

Effectively utilizing Solution Manager (SolMan) during SAP ERP Implementation or upgrade are very far and few!
I have shared my thoughts and experience of using (or not using) SolMan in this piece.
I will be glad to know your experience and insight on SolMan's utilization, either in comments here or on the article's website.
Until next time,
Jawad Akhtar

Anyone..? <crickets>

How to track activity for users logged in using solman to target systems?

If a person accesses a monitored system through solman, how can we track the user activity (including transactions viewed and changes made etc)?
Thanks
Prasad

Hi Prasad,
Please refer the following similar threads to get more detailed Information:
STAD parameter
STAD Historical Data - How Long?
STAD - data for last 30 days
Also check this useful Blog about STAD(/people/andreas.vogel/blog/2007/01/12/statistical-records-part-1-inside-stad) and SAP Note 139418 - Logging user actions.
You can also configure and activate the Security Audit Log (SM19) and then analyze its entries through SM20. You can configure exactly what needs to be tracked...
Useful transactions:
SM19 (config)
SM20 (analyze) (SM20N , depending on release)
SM18 (delete old logs)
Other SAP Note which is helpful in this case 539404 - FAQ: Answers to questions about the Security Audit Log
Hope this helps.
Regards,
Shyam.

Alert Configuration in PI 7.31 using SOLMAN based on Payload

Hello Experts,
We have created alert configuration in PI which will be consumed by SOLMAN and alerts will be triggered to respective recipients based on alert rules.
The alert rules are created using standard configuration objects in NWA. Everything is good up to now, But the issue we have here is as follow:
We have interfaces segregated based on country wise so the configuration objects will be different for which alert rules are created without any issues.
But for some countries for which interfaces are developed by re-using the existing PI objects, the problem starts here for us:
Since the configuration PI objects are same, we are not able to segregate here the alert rules using config objects resulting the only common alert rule for all these countries.
In this case, alerts will be routed to all these countries whenever there is an alert generated. Obviously it is not the best way to proceed. But there will be difference in payload of message based on country .
Hope my issue is clear to you
Is there any way to set these alert rules based on payload information rather than config objects of PI.
Please help me to achieve this ..your help is much appreciated.
Thanks,
Venkat

Hi,
XPI Service: AII Config Service
- com.sap.aii.rwb.server.centralmonitoring.r3.ashost
- com.sap.aii.rwb.server.centralmonitoring.r3.sysnr
are set as expected but still there is problem.

Customization of Alert Mails in Single stack using SolMan via CBMA method

Hello All,
I have created alerts for error messages making use of SolMan via CBMA method. But the contents of the mail are not too informative.
It sends an html file attached to the notification mail. I have provided the screenshot of that html file's content. As you can see, the contents of the html file is not much helpful. Kindly let me know how we can customize this html file.
I need that html file to contain the name of ICO.
Thanks in advance,
Ajeya G V

Hi Ajeya,
The below blog might help
Customize Alerts Using Job in PI 7.31/PO
Customize E-Mail Body and Subject in Alerts in SAP PI 7.31 – Java Stack Only – Part 1 – ESR
Customize E-Mail Body and Subject in Alerts in SAP PI 7.31 – Java Stack Only – Part 2 – ID
regards,
Harish

SALRT_CREATE_API with CBMA and/or Central Monitoring using Solman

Hi,
Does anyone know if function SALRT_CREATE_API can be used to raise alerts in Component Based Message Alerting (CBMA) and/or Centralised Monitoring in Solman? I understand SALRT_CREATE_API worked with the classic Alert Framework.
Che

Hi Michal,
Thank you for jumping in on this thread. Great timing with your blog
However the following thread suggests we can still use SALRT_CREATE_API:
XI Alerting and Central Monitoring : some alerts remain on PI
"Try removing the "CentralMonitoringServer-XIAlerts" RFC connection from both systems (proxy and PI). Then, ensure all com.sap.aii.rwb.server.centralmonitoring.* parameters are configured correctly on PI (restart system to apply changes on exchange profile) and try executing the scenarios again.
Check the target CCMS system the RSALERTDISP report and see if the alerts are being received there."
Perhaps the above only applies in the case of a dual stack? I am not quite ready to try some examples but when I do then perhaps options will become clearer to me. I will try to remember to update this thread with what I find.
Thanks
Che

Use Solman's SLD

Hi,
I'm trying to configure PI to use SLD which is on SOLMAN.
I stopped SLD on PI.
at SXMB_IFR there is link to SLD, so I went to administration and changed SLD hostname from PI to SOLMAN at
com.sap.aii.connect.cr.name
and
com.sap.aii.connect.landscape.name.
After that, SOLMAN's SLD is linked from SXMB_IFR.
Now I have problem in integration builder.
I'm unable to load/import business systems in integration builder from SLD. I get error:
Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor failed.
Could you help me where should I change SLD link of integration builder? (it works after I start PI's SLD.. so it looks old SLD is still linked somewhere).
I have also additional question...: is it possible to do this or better would be automaticaly replicate SOLMAN SLD data into PI SLD?
Best regards,
Martin

hi chichilin,
SLDCHECK is ok, it is pointing to SOLMAN SLD and also business systems are correclty received during check.
I ran SXI_CACHE and refreshed it, but it didn't help.
hi Giuseppe,
SLDAPICUST is correctly maintained and RFC destination is using registered server program, so there is not any reference to hostname...but I assume it loads SLDAPICUST data, which are correct.
I think there must be some setting in administration of http://<host>:50000/dir/start/index.jsp (administration -> properties administration -> exchange profile). This is place where I set SLD link in PI cockpit, I also tried to change other connections (hostnames) but withous success... I dont want to break something else by accident...
Regards,
MArtin

Error while approving patch using solman.

Hi All,
I want to download Patch. So I had add it in my download basket.
Now while approving that patch using Solution Manager Maintainance Optimizer I got error.
The error is like " Condition REQUEST_IN_PROCESS is not checked without Change Management integration ". Due this error I am not able to approve the patch, so not possible to download it.
Regards,
Nisit

Hi,
Please see the below link.
http://translate.google.co.in/translate?hl=en&sl=es&u=http://www.mundosap.com/foro/showthread.php%3Ft%3D15318&sa=X&oi=translate&resnum=2&ct=result&prev=/search%3Fq%3Dsap%2BREQUEST_IN_PROCESS%26hl%3Den
Anil

Monitor system change status using Solman

Is it possible to setup a CCMS monitor that causes an alert whenever the system change option is modified in SE06? Last week we had to open our production environment to make a change and then forgot to close it. The result was the system was left open for a few days before we realized the mistake.
Any help is appreciated.
I have found another way to monitor this scenario
Edited by: Ed Mrowiec on Jul 13, 2010 9:05 AM

Hi Rayyan,
All of the readings regarding changing Oracle passwords state that they should be done in Brtools because it updates certain SAP tables with the new password information while doing it diterctly under SQLPLUS will only update Oracle
All the SAP tables are owned by schema user and not system or SYS users. Both these users are used only by Oracle processes. Hence it has to be changed by SQL command.
Hope this is useful.
Regards,
Deepak Kori

Can I use Solman 3.2 for EWA reports and Monitoring for ECC 6.0/BI 7.0?

We are upgrading to ECC 6.0 / BI 7.0 and need to know if solman 3.2 will continue to work OK with these systems? or do we need to upgrade to 4.0..?
thanks,
Linwood

Hi Linwood,
the Service Content ST-SER which is available for SolMan 3.2 will not include ECC 6.0 / BI 7.0 specific checks.
I agree with Ragu, plan the upgrade and benefit from the new E2E Diagnostics capabilities for the entire landscape.
[http://www.service.sap.com/solutionmanager|http://www.service.sap.com/solutionmanager]
[http://www.service.sap.com/diagnostics|http://www.service.sap.com/diagnostics]
Regards,
Ruediger

Solution Manager Business Case - to use SOLMAN for implementation

Does anyone have any stats on how much quicker an implementation can be by utilizing the Solution Manager tools?

Hi,
What features you want to implement with your SOLMAN?
For EWA, Solution Monitoring Check out these tutors.
https://websmp107.sap-ag.de/~sapidb/011000358700006405622006E
https://websmp107.sap-ag.de/~sapidb/011000358700006819072005E
https://websmp107.sap-ag.de/~sapidb/011000358700005011442004E
https://websmp107.sap-ag.de/~sapidb/011000358700004425722004E.sim
https://websmp107.sap-ag.de/~sapidb/011000358700008968942004E.sim
https://websmp107.sap-ag.de/~sapidb/011000358700001581382005E.sim
https://websmp107.sap-ag.de/~sapidb/011000358700008968952004E.sim
https://websmp107.sap-ag.de/~sapidb/011000358700001581372005E.sim
https://websmp107.sap-ag.de/~sapidb/011000358700006936042005E.sim
This will lead you to success in activating EWA, before these you should have your router ready and connectivity established with SAP.
--Ragu

CPH using solman 3.2

Similar Messages

Maybe you are looking for