CPI 1.2 Current Associated Clients
I'm monitoring a number of a switches in a customer environment. I used CPI automated discovery and SNMP to load the switches into the system.
Even though I can see basic system summary and interface information for a particular switch, I'm unable to see any Client information such as 'Current Associated Clients'.
Here is one way to navigate to the area that I'm referring to:
LifeCycle Theme > Operate > Device Work Center
ALL > Pick A Switch, check the box next to it
Device Details Tab > Clients > Current Associated Clients
The CPI 1.2 documentation say sI should be able to see 'wired' client information on this screen and lists no pre-requisites to doing so. I can't figure out why I'm not seeing any data ('no data available') and can't find any information on how to 'deploy' this functionality or troubleshoot why it's not working. The switch is online in 'managed' status and I know it has clients on it, this has been validated by typical CLI.
Any ideas anyone? Thanks in advance for the help.
Dan
Hi, everybody!
I've begun test the CPI 1.2 and connected two 3750 switches with associated clients.
And I have the same problem as above. Switches have configured with SNMP v3.
There are no any infotmation about Current Associated Clients, ACLs and Ethernet Interfaces in Feature Configuration tab and an error message "No image information in inventory for this device" in Image tab.
Thanks for advance!
Similar Messages
-
Prime Infrastructure "Current Associated Clients" No Data Available
We have prime infrastructure 1.3 and the "Current Associated Clients" always shows No Data Available. Any suggestions as to what would cause this?
End host Tracking needs the Bridge mib data, i.e, the Mac addr table/Cam table entry from device to show end hosts. With the error it is clear that LMS is not able to poll the bridge mib.
Bridge MIB is not as simple as directly polling device for data. It needs SNMP string indexing, which means it has to include @ sign after community to poll each vlan for mac addr's.
For example, the Catalyst switch includes one instance of the standard BRIDGE-MIB for each Virtual LAN in the switch. If the read-only community string is "public" and the read-write community string is "private", one could use "public@25" to read the BRIDGE-MIB for VLAN 25 and use "private@33" to read and write the BRIDGE-MIB for VLAN 33. If just "public" or "private" is used, the BRIDGE-MIB for VLAN 1 is accessed.
This is different when SNMP v3 is used. You have to configure snmp context than, as SNMP string indexing doesn't work on SNMP v3.
If you are using snmp v3, please check the following doc to see how contexts are created :
http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_2/nx-os/system_management/configuration/guide/sm_9snmp.html#wp1070467
If using SNMP v1/v2c please manually poll the device by adding @ on community string and see it works.
-Thanks
Vinod
**Rating Encourages contributors, and its really free. ** -
MSE not detecting associated clients
Hi,
i have one MSE 7.0, one WLC 7.6.120 and CPI 2.1. the AP's are 1602i and 3702i
I had a map in CPI, showing my AP's, but i can't see associated clients, if i modify the client filter to all clients, they appear in the map, but for some reason when i modify back the filter to associated clients the followinf message appears:
there are no clients on this floor. Either you don have any MSE which locates clients or none of your MSE detected any clients on this floor.
NMSP status is active.
WLC and MSE are synchronyze.
anybody knows whats the problem?
thank you!Hi, thanks for your reply.
I checked your link, but in my opinion must be other problem, because sometimes i can see associated clients in CPI map, but most part of the time only shows clients when i modify the client filter to all.
NMSP protocol is up and active between MSE and WLC, service are synchronyzed.
NTP is configured in CPI, WLC and MSE, and time is the same.
In the top of the map there is a message:
Data may be delayed up to 15 minutes or more depending on background polling interval
I waited for more than 30 minutos and the associated client still not showed on the map. furthermore, in my opnion, 15 minutes is a long time to locate a client, if i have to wait 15 minutes to locate every client in my network, there is no way to make location works!
Regards! -
When trying to open Outlook in Win 8.1 I get the error message:
"Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Office Outlook and set it as the default mail client."
It eventually opens but none of my Mail accounts load. When I click on one of the accounts I get
"Cannot expand the folder. Internet mail is not registered properly. Re-install and try again."
Outlook is set with all its defaults. I've tried going through the Repair routine for Microsoft Office but it doesn't help.Hi,
To delete a profile, you may try the steps below:
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps
carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.
1. Press Windows key + R to open the Run command.
2. Type regedit in the Open field and click OK.
3. Locate the key then right click on it and choose Rename:
HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem
4. Type OLD at the end of the name.
5. Try opening Outlook and it may prompt that you need to create a new profile.
I hope this can help.
Regards,
Melon Chen
TechNet Community Support -
I've tried EVERYTHING suggested in this link (http://blog.timolthof.com/outlook-no-default-mail-client-error/) and everything google and bing and still this message keeps popping up. Now when I do a windows search for email, I'm not able to view
the email due to this message.
For the record, I am running W7 Ultimate x64 and connected via Excange Server. I do have another system that is running Office 2010 with none of these problems so I don't know if it's related to Exchange though the searches I've done don't allude
to that.
What's up?Hi,
I understand that when you tried to open Outlook 2010 beta on the Windows 7 64-bit computer, you encountered the following error:
"Either there is not default mail client of the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and
set it as the default mail client."
You have checked the settings under the registry subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Clients\Mail\Microsoft Outlook
I understand the inconvenience you have encountered and appreciate the time and effort you spent on this issue. Please be assured that I
will try my best to help you.
Now let’s troubleshoot the issue by the suggestions below. Please check the results after each suggestion until the problem is resolved.
Suggestion 1: manually set Outlook 2010 as the default e-mail client on Windows 7:
===================
1.
Click Start.
2.
Type "default programs" in the
Search box.
3.
Click Default Programs under
Programs in the search results.
4.
Now click Set your default programs.
5.
Highlight Microsoft Outlook on the left.
6.
Click Set this program as default.
7.
Click OK.
Suggestion 2: Start the Outlook program in safe mode
==============
1.
Click Start, point to All Programs, and then point to
Microsoft Office.
2.
Press and hold the CTRL key, and then click the Outlook program you want to start.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Outlook program, we can try
to disable them. Normally, you could do the following to disable the conflict add-ins in your Outlook program:
Disable add-ins
Click
File menu, click Options >
Add-in, click Go button in the Manage:
Com-in Add.
Check if there are any add-ins,
clear the checkbox to disable them.
Close the Office program and
restart it.
Add one check back each time to the list of Add-In,
restart the Office program, and repeat the above procedure. Once the issue reappears again, we can determine which add-in causes this problem and then disable it.
Suggestion 3: Test the issue with a new Windows user account
==============
We can follow the steps in the articles to create a new user account to test the issue. If the problem does not occur in the new user account, some settings
in the old account are corrupted. We can copy the main user files from the old account to the new account, delete the old account, and then continue using the new account.
For the detailed steps on how to create a new user account and copy data from the old account to the new account, you can refer to the following articles:
For Windows Vista/Windows 7:
http://windows.microsoft.com/en-us/windows-vista/Create-a-user-account
http://windows.microsoft.com/en-us/windows-vista/Fix-a-corrupted-user-profile
Please take your time to try the suggestions and let me know the results at your earliest convenience. . If anything is unclear or if there
is anything I can do for you, please feel free to let me know.
Sally Tang -
Lync 2013 generates repeated messages stating “Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client.”. Events that
seem to generate messages is disconnecting and re-connecting to a network but it also happens randomly and the messages will stack up during a working day. Everything seem to work OK but it is an annoyance. The computer is upgraded (uninstalled first)
from Office 2013 ProPlus to Office 365 ProPlus. Outlook (Desktop) is default mail client. 64-bit Windows 8.1 Enterprise, 64-bit Office (both before upgrade and after).
(Links removed to remediations I've tried)
Made no difference what so ever and the messages continue. What's next?
I posted the above to the Office 2013 forum (unfortunately I'm not allowed yet to post a link to that posting) but due to the fact that the computer affected by this is a networked domain computer I've been redirected to this group instead. I
was asked some additional questions ing the other forum regarding the problem:
Are you able to send mails from other applications like Word or Excel?
NO
Is the PC connected to any Domain/Server? YES
Is this an issue with one PC only. NO - affects all computers that once had Office 2013 Pro Plus installed and now has Office 365 Pro Plus (Originally I posted this question in the Office 365 community but was directed to first the Office
2013 forum and now this forum)
Right click on any file and Click on Send to-> Mail Recipient and check if you are able to send mails using Outlook.
NO
Also check if the Lync add-in is enabled in Outlook.
Start Outlook
Click the File tab.
Go to Options.
Click Add-ins.
Check if the Lync add-in is enabled. YES
My last posting in the other forum contained the following additional information regarding our problem:
As far as we can see installing 32-bit Office 365 Pro Plus using click to run makes no difference.
We do not send any mails from Lync, Lync is however the process that generates the message most frequently (as Lync seem to react upon network events).
Other processes that have Outlook plugins may also be the parent of the message popup (third party applications).
Yes the Lync add-in is enabled. Lync functionality in/from Outlook seem unaffected.
It is not possible to send emails from other applications (explorer, word, excel etc.) ie. right clicking and send to generates the messages and
a follow up error message concerning lack of MAPI enabled e-mail.Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
Trying to install iCloud on Win7 get error message either no default mail client or current mail client cannot fulfill messaging request. How fix?
Outlook 2013. Under Start Up Options, I have checked "Make Outlook the default program for E-mail, Contacts, and Calendar".
-
Windows7 Ultimate 64 bits, Office 2013 32 bits.
My issue is that running Outlook 2013 I get the message
Either there is no default mail client or the current mail client cannot fulfil the message request. Please run Microsoft Office Outlook and set it as the default mail client.
OK, so this should be straight forward:
I set outlook at the default mail client and associate all file with it from Outlook\File\Option. Nope. That does not work.
I go through default programs and set the default mail client as Office 2013 and associate all file with it from Outlook. Nope. That does not work.
I check the registry and it shows that the 64 bit or 32 bit reversion is the default mail client. So that does not help.
I install the 64 bit version instead of the 32 bit version. Nope. That does not work.
I clean the registry and temp file. Nope. That does not work.
I tried: Uninstalled with the Microsoft
fix uninstall and reinstall. This does not work.
Contact the phone technical support. This
does not work.
Addin,s does not work. Adobe, iCloud Addin .... does not work.
'Send email to' menu does not work.
No application communicates with
Outlook, no Microsoft or third apps.
I can only send and receive emails
from within Outlook.
This program is lousy, any
possibility that my money back.
Thanks
Has anyone got any ideas? All the suggested fixes on this forum do not fix this issue.Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
Hi,
If save and send as attachment used in MS Office 2010 then outlook 2010 displays error "Either
there is no default mail client of the current mail client cannot fulfill the messaging request-----error Outlook 2010"
Windows 7 32 bit Enterprise edition and Offoce Professional plus 2010 32 bit is installed in the machine.
I have followed the below troubleshooting steps but still getting the same error.
Method 1:
Followed the Microsoft fix
http://support.microsoft.com/kb/813745
1. On the Windows taskbar, click
Start > Run.
2. In the Open box, type the following text:
3. regedit
4. Press Enter.
5. Go to the following registry key:
6. HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Mail
7. In the right pane, right-click
the following registry value:
8. PreFirstRun
9. Click Delete
10. Click Start, and then click Run.
11. In the Open box, type regedit, and then pressENTER.
12. InRegistry Editor, locate the followingsubkey in the registry:
13. HKEY_LOCAL_MACHINE\Software\Clients\Mail\Microsoft Outlook
14. Select thesubkey, and then pressDELETE.
15. Click
Yes.
Method 2:
Repaired Office
Method 3:
fixmapi.exe. Mapi32.dll
Method 4:
Created the below registry key HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Offlce\15.0\Outlook
Create the following String value if it does not exist: Bitness Set the String value for Bitness to the following if it is not already set to x86
Method 5:
Compared the installed applications
Uninstalled the below program :Microsfot Visuall C++ 2008 Redistributable - x86 - KB2467175" and installed "Microsfot Visuall C++ 2008 Redistributable - x86 - 9.0.21022"
Please help to solve the issue.
Regards,
Boopathi SHi,
Do you mean Send as Attachment button under File>Save & Send>Sending Using E-mail
in Office applications, like Excel or Word?
Is this an issue that come up recently? Have you ever made any changes to your system?
If you have installed multiple e-mail programs on the same computer, please try to make Outlook the default mail client and then try again:
http://office.microsoft.com/en-us/outlook-help/make-outlook-the-default-program-for-email-messages-contacts-and-calendar-HP010355552.aspx
http://support.microsoft.com/kb/223877
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
After viewing a jpg file on my Windows 7 PC I get the following message and I don't know how to answer it "Some of thw file types associated with QuickTime applications are currently associated with other applications. Should I restore these file type associations to QuickTime?" Options are " Yes, No or Do not ask to perform yhis check again. QuickTime Control Panel can be used to make subsequent changes."
What shoul I do about this message?Select no.
-
WAP321 - Max Associated Clients
I just want to double check myself. Does the Maximum Associated Clients setting on the WAP321 cause the AP to refuse connections after that limit has been reached, thus causing the client to attempt to pair with another access point with the same SSID?
Based on it's name that's what it sounds like it does, but it wouldn't be the first time that a name hasn't been all that descriptive.
My situation is that I've got a number of WAP321s with the same SSID, and I think a few of them are just being overwhelmed with clients. I'd like to set this so that if one AP is getting heavily utilized but another is within range and has not reached the maximum number of clients, the AP will refuse the connection and the client will automatically retry on another available AP.
Thanks!Todd,
The AP will refuse connections for itself only. Whether the client will or will not attempt to connect to another AP with the same SSID is another question. I recommend that you test the configuration before trying it in the real world.
- Marty -
Sh dot11 associations client command on 1811w
Hi all,
Wireless is working ok on 1811W.
Need to know from command output below what values are considered good for power and signal strenghts
1811w#sh dot11 associations all-client
Address : 40fc.894e.c48c Name : NONE
IP Address : 192.168.98.2 Interface : Dot11Radio0
Device : unknown Software Version : NONE
CCX Version : NONE
State : Assoc Parent : self
SSID : ACDinternet VLAN : 98
Hops to Infra : 1 Association Id : 5
Clients Associated: 0 Repeaters associated: 0
Tunnel Address : 0.0.0.0
Key Mgmt type : WPA PSK Encryption : TKIP
Current Rate : 54.0 Capability : WMM ShortHdr ShortSlot
Supported Rates : 1.0 2.0 5.5 11.0 18.0 24.0 36.0 54.0 6.0 9.0 12.0 48.0
Signal Strength : -40 dBm Connected for : 12389 seconds
Signal Quality : N/A Activity Timeout : 56 seconds
Power-save : On Last Activity : 64 seconds ago
Packets Input : 1745 Packets Output : 1005
Bytes Input : 223588 Bytes Output : 901041
Duplicates Rcvd : 8 Data Retries : 64
Decrypt Failed : 0 RTS Retries : 0
MIC Failed : 0 MIC Missing : 0
Packets Redirected: 0 Redirect Filtered: 0
Address : 74e5.0b5b.e788 Name : 1811w
IP Address : 192.168.98.3 Interface : Dot11Radio0
Device : 4500-radio Software Version : NONE
CCX Version : 4
State : Assoc Parent : self
SSID : ACDinternet VLAN : 98
Hops to Infra : 1 Association Id : 12
Clients Associated: 0 Repeaters associated: 0
Tunnel Address : 0.0.0.0
Key Mgmt type : WPA PSK Encryption : TKIP
Current Rate : 54.0 Capability : WMM ShortHdr ShortSlot
Supported Rates : 1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
Signal Strength : -48 dBm Connected for : 2354 seconds
Signal Quality : N/A Activity Timeout : 20 seconds
Power-save : Off Last Activity : 0 seconds ago
Packets Input : 6480 Packets Output : 3345
Bytes Input : 1299557 Bytes Output : 3231413
Duplicates Rcvd : 24 Data Retries : 206
Decrypt Failed : 0 RTS Retries : 0
MIC Failed : 0 MIC Missing : 0
Packets Redirected: 0 Redirect Filtered: 0
Address : a00b.bacf.37a5 Name : NONE
IP Address : 192.168.98.5 Interface : Dot11Radio0
Device : unknown Software Version : NONE
CCX Version : NONE
State : Assoc Parent : self
SSID : ACDinternet VLAN : 98
Hops to Infra : 1 Association Id : 11
Clients Associated: 0 Repeaters associated: 0
Tunnel Address : 0.0.0.0
Key Mgmt type : WPA PSK Encryption : TKIP
Current Rate : 54.0 Capability : WMM ShortHdr ShortSlot
Supported Rates : 1.0 2.0 5.5 11.0 18.0 24.0 36.0 54.0 6.0 9.0 12.0 48.0
Signal Strength : -63 dBm Connected for : 2392 seconds
Signal Quality : N/A Activity Timeout : 50 seconds
Power-save : On Last Activity : 70 seconds ago
Packets Input : 1764 Packets Output : 1323
Bytes Input : 347117 Bytes Output : 1297921
Duplicates Rcvd : 34 Data Retries : 425
Decrypt Failed : 0 RTS Retries : 0
MIC Failed : 0 MIC Missing : 0
Packets Redirected: 0 Redirect Filtered: 0
Also what is Association ID mean in above output?
Thanks
MaheshYes. They are very, very good signal strength from the clients to the WAP.
Wireless is a two-way street. You also have to verify what the signal strength is from each client to the WAP. -
opening PDF get Microsft office outlook message "Either there is no defaul mail client or the current ....."
tried finding an email configuration under preferences but it is not listed
any help is appreciatedterrytad wrote:
tried finding an email configuration under preferences but it is not listed
Sorry, I don't understand that - did you try to add one? -
WAP 321 disconnecting all associated clients
Hi Support,
I am a newbie technical support. Currently, I encountered a issue about WAP321 that will occasionally disconnecting all the clients(about 7 clients only) in one shot and cannot connect back at all. However, after login to the Web Gui and reboot the WAP321. It is able to connect again.
I had upgrade the firmware to 1.0.4.2 but the problem still exists. The AP is using only WPA2-Personal.
The environment of the AP is like this:
Internet->Watchguard Firewall (with AP too but different SSID with the WAP321, flat vlan) ->switches and WAP321
Is that any misconfiguration of the AP or the network environment cause this issue?
Another problem is the time of the AP cannot be fixed. I had tried either set the time using NTP (port 123 is opened in firewall) or manually input but it will revert back to 1999 after reboot.
Thanks in advanced!Hi Support,
I am a newbie technical support. Currently, I encountered a issue about WAP321 that will occasionally disconnecting all the clients(about 7 clients only) in one shot and cannot connect back at all. However, after login to the Web Gui and reboot the WAP321. It is able to connect again.
I had upgrade the firmware to 1.0.4.2 but the problem still exists. The AP is using only WPA2-Personal.
The environment of the AP is like this:
Internet->Watchguard Firewall (with AP too but different SSID with the WAP321, flat vlan) ->switches and WAP321
Is that any misconfiguration of the AP or the network environment cause this issue?
Another problem is the time of the AP cannot be fixed. I had tried either set the time using NTP (port 123 is opened in firewall) or manually input but it will revert back to 1999 after reboot.
Thanks in advanced! -
How to clear associated Clients using CLI or GUI in WiSM?
Hi,
We have WiSM controller LAP Management. I want to clear clients those who are associated but not authenticated to Wi-Fi.
I tried this using GUI but it takes time since i have to remove each client one by one.
Is there any method by which I can remove multiple clients at one time?associated but not authenticated to Wi-Fi is an issue on open auth network along with draining dhcp pool.
It could be mitigated through:
disable broadcast ssid -publish the same.
Have security like wep/wpa -publish this around the open wifi access area.
Increase dhcp pool size and or reduce the lease time.
reduce idle and session timeout.
WLC doesn't have proactive way to remove or deauth those clients since there could be real clients that is on idle will get disconnected as well.
it is nice to kick the wireless clients on webauth wlan if the client didn't webauth within specific time.
what do you guys think.
Maybe you are looking for
-
HOw do I track a stolen Mac Book Pro
-
Is there a way to automate the CFX tags installation?
Hello, I'm currently in the process of re-installing a web farm of ColdFusion 8 servers (W2K8, IIS 7.5). I have to install a number of CFX tags (C++) on each server to get the code running. Is there a way to automate the installation of the CFX tags
-
Fresh Install: Gnome Shell segfault and bgrt invalid status (Nvidia)
Hi everyone! I have Arch freshly installed, and after some modprobing last night I was finally able to get the Arch repository Nvidia drivers working. That being said, I am still getting a "bgrt invalid status" message on boot up (and, for what it is
-
Tagging a PDF in Acrobat Pro messes up word spacing
We have an issue. 1. A document in Ventura is published as a PDF. 2. If you search on a particular phrase in the document, it finds ALL occurences of the phrase without issue 3. As soon as you "Add tags" to the PDF two things happen: 1. If you c
-
I've synched my 3GS to my mac and now need to sync to the iphone4. (transfer all apps)