CPI 1.2 WLAN Guest Access, multiple account

Hello All
Is it possible with the CPI 1.2 built-in WLAN guest access functionality to create a WLAN guest account that can simultaneously by severall users?
Or if that is the normal behaviour, is it possible to restrict one guest user to one computer?
Thanks,
Patrick

To answer my own question, this is done under:
Configure - Templates - Controller Template Launch Pad (if you are working with templates), then Security - User Login Policies and here it's the setting "Maximum Number of Concurrent Logins for a single user name". Set it to 0 for unlimited times the same username.
Sadly that means that I can not restrict it per guest user, but only global.

Similar Messages

  • BBSM and ISA for WLAN Guest Access

    We are considering the purchase of a BBSM to help provide wlan guest access to the Internet.
    I know that Micrsoft's ISA server is one component of the BBSM, but can anyone tell me:
    1) what version of ISA is implemented in BBSM?
    2) is the ISA compoenent at all customizable? That is, can I add poilicies to BBSM's ISA to restrict the Internet sites users can go to?
    Thanks very much.
    John

    I am not sure what version of ISA it is but from our experience you can not filter what addresses the user can go to. we have customised it some in that we forward all of the web traffic comming in to a web filter box and allow the filter box to block sites.

  • How do i access multiple accounts on one computer

    I have several apple devices in my home and i can't seem to see the different purchases when i plug in the different devices.  I have itunes installed on my computer, do i have to sign in each time with the apple id of each user to see their purchases, libraries, apps, etc....?  i get so frustrated with itunes.......help

    Create multiple Windows User Profile with each managing his own iTunes account and library.
    To create a user account on Windows 7:
    To open User Accounts, click the Start button , click Control Panel, under 'User Accounts and Family Safety', select Add or Remove User Accounts.
    Click Create a new account.
    Type the name you want to give the user account, click an account type(make sure to give Administrator), and then click Create Account.

  • I'm unable to access multiple accounts from one computer on Apple TV.

    I have an imac running OSX (10.5.8). There are three accounts on the computer, and each one is connected to Home Sharing using the same account.
    Whenever I try to access the files on accounts (other than the first one signed on), I get a message saying that it cannot access the library. However, each account is signed on with their itunes open. The first account to sign on when the computer is started-up never has an issue. It's each other account.
    Does anybody have any information regarding this? I'm really at a loss for what to do.

    Welcome to the Apple Community.
    I don't have any problems doing the same thing, do they share content, are they all using admin accounts.

  • LAN+WLAN guest access

    We are about to deploy a 'guest' ssid. The scenario we are struggling with is when a employee connectes to the LAN and the laptop automatically connects to the 'guest' WLAN (dual homed PC with default gateway on LAN). We are trying to figure out how to prevent this since our users will not disable the wireless nic.

    This is more a Microsoft issue. It just associates to any AP if the AP broadcasts the SSID:
    http://support.microsoft.com/default.aspx?scid=kb;en-us;811427&Product=winxp
    I am thinking a hack. I try the following in the lab:
    1. configure an AP so that it broadcasts a SSID which uses open authentication and no encryption. I assume that this is your configuration
    2. I use a XP laptop (I guess that you use XP). The XP picks up the SSID broadcast from the AP. I configure the SSID; so that I enable WEP encryption and enter a bogus WEP key.
    I do not get an IP address on the wireless NIC. Of course, I assume that you pick an unique SSID; so that no user use the same SSID at his/her home.

  • ISE with CWA and wired guest access via WLC Anchor

    Can an Anchor WLC (WLCa) provide a wired guest LAN service if the wlan guest access is using CWA?
    We are deploying a WLAN only ISE solution (it is a full license ISE though) but they just want a few wired guest ports.  I was hoping to add L2 switch to the DMZ where the WLCa is and that the L2 switch wouldnt need any other config as the WLCa just bridges the wired to the wlan vlan.  This Im sure i have done before.
    So now I have set wiredguest the same as i have done before ISE and my wired clients get an IP address, but when they redirect, the URL they get is different, and the redirect just doesnt work.
    It comes out as:
    https://my_ise_ip:8443/guestportal/Login.action?switch_url=https://my_ise_host/login.html&wlan=my_wired_guest_lan&redirect=www.google.co.uk
    So does my simple L2 only switch need an ISE config on it or should the WLCa be handling or the redirection just as it would for a wlan device.

    The ISE never receives an auth entry, so i dont believe the redirect is working for the wired client.  So even though the clients browser gets a redirect url which fails connection, the client info in the WLCa doesnt have a redirect ACL listed like a wlan client would

  • Wired guest access on WLC 4400 with SW 7.0.240.0

    Hello,
    after we upgrade our Wlan-controller 4400 from software 7.0.116.0 to 7.0.240.0
    wired guest access don't work anymore.
    All other things works fine, incl. WLAN guest access!
    When we try wired guest access, we get the web-authentication page and can log in.
    On the controller we can see that the Policy Manager State changes from WEBAUTH_REQD
    to RUN.
    But then there is no access to the internet.
    We tried also SW 7.0.250.0, same problem!
    Log Analysis on the WCS:
    Time :03/12/2014 14:21:23 MEZ Severity :INFO Controller IP :10.101.200.11 Message :The WLAN to which client is connecting does not require 802 1x authentication.
    Time :03/12/2014 14:21:23 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client does not have an IP address yet.
    Time :03/12/2014 14:21:23 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client L3 authentication is required
    Time :03/12/2014 14:21:23 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client Moved to DHCP Required State.
    Time :03/12/2014 14:21:26 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Mobility role update request. from Unassociated to Local Peer = 0.0.0.0, Old Anchor = 0.0.0.0, New Anchor = 10.101.200.11
    Time :03/12/2014 14:21:26 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Mobility role changed. State Update from Mobility-Incomplete to Mobility-Complete, mobility role=Local, client state=APF_MS_STATE_ASSOCIATED
    Time :03/12/2014 14:21:26 MEZ Severity :INFO Controller IP :10.101.200.11 Message :DHCP successful.
    Time :03/12/2014 14:21:26 MEZ Severity :ERROR Controller IP :10.101.200.11 Message :Client got an IP address successfully and the WLAN requires Web Auth or Web Auth pass through.
    Time :03/12/2014 14:21:26 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client IP address is assigned.
    Time :03/12/2014 14:22:01 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Webauth user logged in to the network. manni
    Time :03/12/2014 14:22:01 MEZ Severity :INFO Controller IP :10.101.200.11 Message :AAA response message sent.
    Time :03/12/2014 14:22:01 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client has completed Web Auth successfully.
    Time :03/12/2014 14:22:01 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client has completed Web Auth successfully.
    Trying http://www.google.de .... doesnt work. No Log Entries. Next entries while logging out.
    Time :03/12/2014 14:36:20 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Web auth is being triggered again.
    Time :03/12/2014 14:36:20 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client L2 authentication has been completed successfully.
    Time :03/12/2014 14:36:20 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client Moved to DHCP Required State.
    Time :03/12/2014 14:36:20 MEZ Severity :INFO Controller IP :10.101.200.11 Message :WebAuth user Logged out from network.
    Has someone a idea how to solve this problem?
    Regards
    Manfred

    Hi
    Yes got it resolved. It turns out that the connection from the wired guest access port to the WLC must be L2. That is the switch that the wired guest acces sport is connected and WLC are connected to must be L2 only. We were using a single switch to do the testing and it was also doing the routing for the test LAN. Even though there was no L3 VLAN interface configured for the VLAN that the guest access port was on for some reason this breaks it. Absolu Didnt have chance to work out the exact limitations of this as we simply made the switch L2 only and configured an 802.1Q trunk to the Internet router and made subinterfaces on the router for the wired and wireless egress ports and it worked then. No config change was needed on the WLC at all.
    The only thing I can think of is that it's something about the way the WLC joins the wired guest access ingress VLAn and egress VLAN. The WLC isn't a reall router it says so in the documentation. I think the packet coming from the wired access port is being bridged to the egress VLAn not routed and this is what screws it up (remeber with a router the source and destination MAC addresses would be changed with a bridge they aren't). Got to be something along those lines. If you have a bigger newtork with a guest anchor WLC handling this function you dont run into this as the traffic is coming over an EOIP tunnle from the remote WLC so the switch with the guest anchor WLC doesnt see the MAC address of the wired guest PC.

  • ITunes library on Time Capsule accessed by multiple accounts - Not working!

    I moved my iTunes library from an external hard drive to my new Time Capsule (it is in the Data folder). I can access it fine from my user account, but my husband who has an account on the same MacBook Pro cannot. When he tries to access the Data folder it has a red circle with a white line indicating that he does not have access. I have used Airport Utility to change the file sharing (enable file sharing with time capsule password and airport disk guests access read and write). But still he has no access on his account. Please help! Thanks!

    I have my iTunes library on a Time Capsule. I can access it from more than one user account without the problems described here. In fact, I can access it from more than one account simultaneously if more than one machine is on. I have not tried accessing from multiple accounts using Fast User Switching.
    The only think of that might be different is the location of the files. The iTunes Music folder is on the Time Capsule but not inside a Data folder. Each user's iTunes Library files are stored in the usual location in their home directory on the machines. iTunes' preferences are set to point to the folder on the Time Capsule.

  • ITunes Library on Time Capsule accessed by multiple accounts on same Mac

    I moved my iTunes library from an external hard drive to my new Time Capsule (it is in the Data folder). I can access it fine from my user account, but my husband who has an account on the same MacBook Pro cannot. When he tries to access the Data folder it has a red circle with a white line indicating that he does not have access. I have used Airport Utility to change the file sharing (enable file sharing with time capsule password and airport disk guests access read and write). But still he has not access on his account. Please help! Thanks!

    I have my iTunes library on a Time Capsule. I can access it from more than one user account without the problems described here. In fact, I can access it from more than one account simultaneously if more than one machine is on. I have not tried accessing from multiple accounts using Fast User Switching.
    The only think of that might be different is the location of the files. The iTunes Music folder is on the Time Capsule but not inside a Data folder. Each user's iTunes Library files are stored in the usual location in their home directory on the machines. iTunes' preferences are set to point to the folder on the Time Capsule.

  • Access Canon MX860 from multiple accounts on iMac over WiFi

    I bought a Canon PIXMA MX860 yesterday and set it up using my account on our iMac running 10.5.6. The printer is connected over WiFi. I can print and scan from my account.
    When I try to print from another account on the iMac (my wife as an account and we have a guest account) the printer queue says "Printer is currently off-line". I sent a message to Canon, they told me to set permissions for "Everyone" to Read & Write on the Library folder. I tried this for:
    /Macintosh HD/Library/Printers/Canon
    and all enclosed items. Still doesn't work.
    Has anyone else set up the MX860 to print from multiple accounts on a computer? Did you have to do anything beyond the procedure specified by Canon?
    Thanks!
    Matt

    Hello Matt,
    I don't understand why Canon support would have got you to change permissions on the Canon folder. This is not normally required.
    I have the MP980 connected via wireless, and I can print to it from my Admin account and a standard account I made up just to check. What account type do you have set for the missus?
    I also would have thought that the printer off-line message would have had more to do with her account not being able to access the network connection, rather than not being able to access the core Printers folder.
    If using her account, you open the Print Queue and select the Utility icon, and then set the Canon IJ Printer Utility to network, does the MX860 display? And if you select it, can you peform any of the Maintenance functions?
    Also, if you connect the MX860 directly to the Mac via USB, are you able to print to it using her account?
    Pahu

  • HT204053 How do I access multiple iCloud accounts

    How do I access multiple iCloud accounts with a single IPAD?

    You can set up an additional "secondary" iCloud account by going to Settings>Mail,Contacts,Calendar>Add Account>iCloud and entering the ID and password.  There are some restrictions on secondary accounts. 
    Only the primary account can be used for Photo Stream, Bookmarks, Documents, iCloud Backup and Find My iDevice.  Also, Push Mail only works for the Primary Account; Secondary Account Mail is Fetch.

  • 1) I have multiple accounts at the iTunes store and none are now associated with my purchases...I think because passwords have been associated with various id's and I can't log in and access those purchases.  I want to get back to being able to use one i

    1) I have multiple accounts at the iTunes store and none are now associated with my purchases...I think because passwords have been associated with various id’s and I can’t log in and access those purchases.  I want to get back to being able to use one id and password and be able to access those purchases.
    2) When I upgraded my iPhone 3gs, to the latest version 5.0.1 (9A405), is when I noticed that i couldn’t update my applications.  There are two names/accounts on the phone and prior to the update there was just the one.  I have tried entering every conceivable password that I have ever used and get the incorrect password error every time. The apps on the iPhone are apparently associated with several/different accounts.  I just want to get everything back to the way it was.  One id and one password with purchases associated with just one account that can be updated on my computer as well as my iPhone.

    Hello sadiepix,
    The following article details several things that can be done to quell iTunes' constant need for authorization.
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    Cheers,
    Allen

  • Can I access music from multiple accounts on one cpu?

    Can I access music from multiple accounts on one cpu

    Here's one option: http://support.apple.com/kb/PH12366
    But frankly you'd be better off creating unique user accounts on the computer and having seperate iTunes libraries for each user as described here: http://support.apple.com/kb/ht1495

  • E2500 with multiple APs for guest access

    I got 5 E2500 routers and the main one has setup to IP address 192.168.1.254 and the rest APs are programmed into the bridge mode with the IP address 192.168.1.245 through 248. The secured wireless network  works fine when I roaming between these APs but the only AP that I can get internet access for guest wireless network is the main (192.168.1.254) router; for every other APs, I will get the guest log on screen (prompt for guest access password) and no internet access after I type in the correct access password. Does the E2500 support multiple APs guest or it requires a special way to configure it? Please help...
    Jim

    Guest Access allows you to provide Internet connection to your guests, however, they will not have access to your computers or other personal data. When you set up your Valet or Linksys Wireless-N router, the Cisco Connect software will create two wireless networks with the same Wireless Network Name (SSID) that differs from one another by a -guest suffix to one of the wireless network names.
    So first of all remove all the networks from the preferred list of the computer and then try to connect.  

  • WCS Guest access account creation - options

    Hi,
    I'm looking in to different options for creating guest access accounts and need some help.  I'm new to the product and bascially have been asked if there are any other options that the Web GUI to create account.  We would like trigger the creation of an account using work flow.  Saw that there are We services availble with NAC but not sure how the products relate
    It's a new setup - so assume the latest verion of WCS is being used.
    Thanks
    Alex

    couple of thoughts as I'm going through the process of setting up guest access right now.
    1) use RADIUS and maintain the accounts through a RADIUS solution that provides the UI you desire.
    2) another thread somewhere here pointed to http://sourceforge.net/projects/simple-swag/ which is a web-based user account creator.
    3) use an external authentication page and perform the auth there.
    we don't require guests to have accounts but we do limit when it is available at our various locations.

Maybe you are looking for