CPI-C ERROR CM_PRODU while creating RFC destination from BW to R/3

hi,
i am trying to create connection between R/3 and BW and getting the error -
partner not reached/ CPI-C ERROR CM_PRODU.
could anybody plz. help.
thanks, sunil.

Hi,
I think is because the SAP gateway host is deactivated.
As per SAP notes, issue statement ping <IP address> (In this example:192.168.4.2) No reply: Boot SAP Gateway host required.
An answer:Check whether the TCP/IP port 33xx is open (where xx corresponds to the system number) and start the SAP gateway.
The TCP/IP port is also partially defined in the services file as an sapgw<SID> or sapgwxx entry (where xx corresponds to the system number). The services file is in the Windows directory or in WinNT/System32/drivers/etc.
Rgs
Antonino

Similar Messages

RFC - XI - WEBSERVICES scenario - Where to create RFC Destination

Hi Experts
For my RFC - XI - WEBSERVICES scenario, I have to create one TCP/IP RFC destination on R/3 system with the following details
RFC Destination Name    : XXXX
Connection Type            : T (TCP/IP)
Activation Type              : u201CRegistered Server Programu201D
Program ID                      : YYYY
Gateway Host                : R/3 Details ..??
Gateway Service           : R/3 Details ..??
My Function Module (Remote-Enabled) - u201CZZZZu201D is defined in R/3 System.
This Function Module should be communicated with the target system i.e. NW XI system
As per the Note from SAP Help: To be able to communicate using RFC, you need to define the target systems as RFC destinations in the sending system(R/3)
Target system u2013 XI Server
Sending system u2013 R/3 System
Are my details provided are good enough as per my explanation? Please guide me in this regard.
QUESTION : Where exactly do I need to create the RFC Destination(SM59)? on R/3 side or on XI side?

Refer the following link-
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414700)ID1636235450DB01012070359836134304End?blog=/pub/wlg/1438
what are the inputs should be given to Gateway Host and Gateway Service while creating RFC Destination??
Open transaction SMGW on the R/3 system and choose
Goto -> Parameters -> Display. Beneath Attributes there will be the
entries 'gateway hostname' and 'gateway service'.#

Error in Creating RFC Destination

Hi,
I am Going for RFC to File Scenario.
For Sender RFC it < I am trying to create RFC Destination in SAP r/3
I have Given
RFC Dest : XI_CONNID
Conn type : Tcp/IP
Activation Type : Register Server Program
Program ID :sap
gateway host : sap-server( Sap server)
gateway service : sapgw00.
I saved and I tested but it is showing errors.
Error : Error in Opening RFC Connection
Whe i Click on this error message it i showing
Error Program sap not registered.
Points will be awarded.
regards,
Jayasimha

Dear Jaya,
create a RFC SENDER communication channel first and then activate the channel.
now go to sm59 there use the same program-id as u did at RFC SENDER COMMUNICATION CHANNEL.
note:program-id is registered by XI at R/3 level with details related to it's profile(XI profile).
step 1) create RFC COMMUNICATION CHANNEL with program-id as "any name" at XI first .
2)create TCP/IP connection with registered program-id created by XI at first step
so when you execute steps 2 then 1 you will get error ,coz by that time program-id is not yet registere by XI in R/3 domain.
after executing step 1 i.e creating porgram id at R/3 through XI.
got to ST22 at R/3 and check whether any dump is found against "XI creating porgram-id at R/3 level".
we failed at creating PROGRAM-ID itself at R/3 level because of missing authorizations against my R/3 user id,which we will be using at XI RFC channel.
generally problem will be at PROGRAM-ID creation itself,so just go to ST22 and check any authorizations missing for your userid which is being used at RFC channel configuring at XI.
Thanks & Regards,
Rama Krishna

Creat RFC destination for portal

Hello,
when i am doing RSPOR_SETUP , i am getting java and abap support package versions are different error message for step 2, i.e creating RFC destination for portal.
Please send me suggestion regarding this issue.
regards
Sreesudha

is ur BI and Portal SP versions different ?? ....if true ?? make sure they have the same SP
use this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00bed70a-7501-2a10-ec9e-9a04485ab477
for guidance......

Time Machine Error: An error occurred while creating the backup directory

Time Machine Error: Unable to complete backup. An error occured while creating the backup directory.
I back up to wirelessly to a Time Capsule. I get these errors often. I'll go for a few days with everything working and then encounter these errors. I've even completely erased the Time Capsule drive and started over. It'll work fine for a few days and then start the errors over again. Interestingly, when the errors occur, the Time Capsule drive can not be unmounted even if clicking the eject button. I am on 10.5.8 but it happened in 10.5.7 as well. I have another Mac that doesn't seem to have any issues with the same Time Capsule.
Here's a log - they all seem to fail with similar errors:
Starting standard backup
Backup destination alias resolved to path: /Volumes/AirPort Disk
Disk image /Volumes/AirPort Disk/Brittney’s Computer_0019e33d4fde.sparsebundle mounted at: /Volumes/Backup of Brittney’s Computer
Backing up to: /Volumes/Backup of Brittney’s Computer/Backups.backupdb
2009-08-27 13:52:48.465 FindSystemFiles[2955:713] Querying receipt database for system packages
2009-08-27 13:52:48.693 FindSystemFiles[2955:713] Using system path cache.
Failed to create progress log file at path:/Volumes/Backup of Brittney’s Computer/Backups.backupdb/Brittney’s Computer/2009-08-26-212437.inProgress/.Backup.273091970.250248.log.
Error: (-50) Creating directory 7CCE60DD-ADCC-4004-A0D9-3EC83D892372
Failed to make snapshot.
Backup failed with error: 2
Failed to eject volume /Volumes/Backup of Brittney’s Computer (FSVolumeRefNum: -114; status: -47; dissenting pid: 0)

Nancy H wrote:
I used it as it came, supposedly formatted for a mac.
It may or may not be right.
I'd be inclined to start over, per #5 in the Frequently Asked Questions *User Tip* at the top of this forum.
If that doesn't help, go on to #C10, etc., in the Troubleshooting Tip, as in the previous post.

Backup Fail with Volume Shadow Copy Service error: Error calling a routine on the Shadow Copy Provider, Event ID 12293, error returned while creating the volume shadow copy 0x8004230f,

We are using TINA backup solution and windows 2003 backup is failling with VSS error.
For testing purpose we initiate a system state backup (or any file backup) with the help of windows 2003 ntbackup.exe and found it is failing with below error.
Backup error report.
Backup Status
Operation: Backup
Active backup destination: File
Media name: "Backup.bkf created 28/05/2014 at 06:34"
Volume shadow copy creation: Attempt 1.
Error returned while creating the volume shadow copy:0x8004230f.
Error returned while creating the volume shadow copy:8004230f
Aborting Backup.
The operation did not successfully complete.
We check event viewer and found below error event.
Event Type:
Error
Event Source:
VSS
Event Category:
None
Event ID:
12293
Date:
28/05/2014
Time:
05:48:10
User:
N/A
Computer:
CQ329TOS
Description:
Volume Shadow Copy Service error: Error calling a routine on the Shadow Copy Provider {b5946137-7b9f-4925-af80-51abd60b20d5}. Routine details Cannot ask provider {b5946137-7b9f-4925-af80-51abd60b20d5} if
volume is supported. [0x8000ffff] [hr = 0x8000ffff].

Resolution:
After getting this error we check Shadow Copy provider and writer health and fond it is fine.
To get shadow copy providers details use below command.
Command: vssadmin list providers
Command output
C:\>vssadmin list providers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001 Microsoft Corp.
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
   Provider type: System
   Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
   Version: 1.0.0.7
To get shadow copy writers health
Command: vssadmin list writers
Command Output.
C:\>vssadmin list writers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001 Microsoft Corp.
Writer name: 'System Writer'
   Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
   Writer Instance Id: {333e02cd-d9ec-43c8-9b45-39691ad1b351}
   State: [1] Stable
   Last error: No error
Writer name: 'Registry Writer'
   Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
   Writer Instance Id: {800877a5-e13d-47a3-8f99-ebd4d3b3fd12}
   State: [1] Stable
   Last error: No error
Writer name: 'MSDEWriter'
   Writer Id: {f8544ac1-0611-4fa5-b04b-f7ee00b03277}
   Writer Instance Id: {63400aa0-a17f-4121-9483-1cd226f03238}
   State: [1] Stable
   Last error: No error
Writer name: 'COM+ REGDB Writer'
   Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
   Writer Instance Id: {e13cb72b-84fa-4c86-86d8-48f523aafc9a}
   State: [1] Stable
   Last error: No error
Writer name: 'Event Log Writer'
   Writer Id: {eee8c692-67ed-4250-8d86-390603070d00}
   Writer Instance Id: {ce63b3a0-e038-4e56-9d07-929f256639de}
   State: [1] Stable
   Last error: No error
Writer name: 'WMI Writer'
   Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
   Writer Instance Id: {008e8714-ed6d-4288-81ce-4b0b1ec41294}
   State: [1] Stable
   Last error: No error
Writer name: 'BITS Writer'
   Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
   Writer Instance Id: {e22a8953-a52c-4a76-bec0-8773122cbff8}
   State: [1] Stable
   Last error: No error
Next I check Shadow Copies details from volume properties (right click on C or other drive then select properties then click on Shadow Copies Tab) and found it is showing the same error code..
From this error it is clear that the issue is inside the registry hive and due to junk hive shadow copies services not able to working properly.
For me the server have two disk we check disk signature at MBR and found the disk signature was.
Signature disk 0 : 9351912b
Signature disk 0 : FDFBE035
But at registry we found lot of nonexistance signature. Which indicate lot of junk valu inside registry.
Now how can we resolve this issue?
It is very simple just delete the registry key “volume” (registry key “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\STORAGE\Volume”) and reboot the server it will “Volume” registry hive automatically.
Note:
When you remove registry key it is showing error unable to delete, then please right click on it select permission then take ownership and assign full permission to your login account.
Please be careful when you delete registry key because system can fully crashed if you delete or modify wrong registry key.
Your can take a backup of the registry key by exporting.

UnExpected error occured while creating ejb container

Hey, I am trying to deploy a new bean that I just wrote with a bean that has already been written. My bean is the News bean, the existing bean is the PPSO bean.
when I deploy, I get the following exception:
[26/Feb/2004:11:22:42] SEVERE ( 2104): LDR5004: UnExpected error occured while creating ejb container
java.lang.ClassNotFoundException: com.pragmatics.ppcig.model.ejb.NewsBean_LocalHomeImpl
 at com.iplanet.ias.loader.EJBClassLoader.findClass(EJBClassLoader.java:457)
 at com.iplanet.ias.loader.EJBClassLoader.loadClass(EJBClassLoader.java:585)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
 at com.sun.ejb.containers.BaseContainer.initializeHome(BaseContainer.java:426)
 at com.sun.ejb.containers.EntityContainer.initializeHome(EntityContainer.java:355)
 at com.sun.ejb.containers.ContainerFactoryImpl.createContainer(ContainerFactoryImpl.java:230)
 at com.iplanet.ias.server.AbstractLoader.loadEjbs(AbstractLoader.java:345)
 at com.iplanet.ias.server.ApplicationLoader.load(ApplicationLoader.java:81)
 at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:134)
 at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:110)
 at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:294)
 at com.iplanet.ias.admin.event.AdminEventMulticaster.invokeApplicationDeployEventListener(AdminEventMulticaster.java:424)
 at com.iplanet.ias.admin.event.AdminEventMulticaster.handleApplicationDeployEvent(AdminEventMulticaster.java:408)
 at com.iplanet.ias.admin.event.AdminEventMulticaster.processEvent(AdminEventMulticaster.java:291)
 at com.iplanet.ias.admin.event.AdminEventMulticaster.multicastEvent(AdminEventMulticaster.java:99)
 at com.iplanet.ias.admin.server.core.channel.AdminChannelServer.sendNotification(AdminChannelServer.java:84)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:261)
 at sun.rmi.transport.Transport$1.run(Transport.java:148)
 at java.security.AccessController.doPrivileged(Native Method)
 at sun.rmi.transport.Transport.serviceCall(Transport.java:144)
 at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:460)
 at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:701)
 at java.lang.Thread.run(Thread.java:534)
here are pieces of my deployment descriptor:
<entity>
 <description>PPSO EJB</description>
 <display-name>PPSO EJB</display-name>
 <ejb-name>PPSO</ejb-name>
 <local-home>com.pragmatics.ppcig.model.ejb.PPSOLocalHome</local-home>
 <local>com.pragmatics.ppcig.model.ejb.PPSOLocal</local>
 <ejb-class>com.pragmatics.ppcig.model.ejb.PPSOBean</ejb-class>
 <persistence-type>Bean</persistence-type>
 <prim-key-class>java.lang.String</prim-key-class>
 <reentrant>False</reentrant>
 <env-entry>
// - select statements here that don't apply - //
</entity>
 <entity>
 <description>News EJB</description>
 <display-name>News EJB</display-name>
 <ejb-name>News</ejb-name>
 <local-home>com.pragmatics.ppcig.model.ejb.NewsLocalHome</local-home>
 <local>com.pragmatics.ppcig.model.ejb.NewsLocal</local>
 <ejb-class>com.pragmatics.ppcig.model.ejb.NewsBean</ejb-class>
 <persistence-type>Bean</persistence-type>
 <prim-key-class>java.lang.String</prim-key-class>
 <reentrant>False</reentrant>
 <resource-ref>
 <res-ref-name>jdbc/ppcigDS</res-ref-name>
 <res-type>javax.sql.DataSource</res-type>
 <res-auth>Container</res-auth>
 <res-sharing-scope>Shareable</res-sharing-scope>
 </resource-ref>
 </entity>
Any ideas what is causing this error?
Thanks!

Hi shanu, thanks for your reply,
Yes I configured the JMS Objects in my AS before deploying the MDB.
I set
- a Queue: RFIDLocatorQueue
- a connection Factory: RFIDLocatorConnectionFactory
- and a Physical destination for my logical queue called: RFIDLocatorPhysicalQueue
The latter was linked to the RFIDLocatorQueue by putting RFIDLocatorPhysicalQueue in the name parameter of the RFIDLocatorQueue.
Is there maybe something else I forgot to configure ?
thanks a lot

Create RFC destination

HI,
I want to build RFC destination between 2 ABAP system ,
i need step by step solution ?
Regards

Hi,
1)Log on to ABAP system.
2) Goto T-code SM59.(For Creating RFc destination)
3)Different connection types will appear select for ABAP CONNECTION
4)Click on Create button from top.
5)Give the name of RFC destination------ex:ZR/3TOBW
6)Connection type -
3
7)Short Description
8)Click on Technical Settings Tab and maintain the Host name and system number of another ABAP System.
9)Click on Logon&Security Tab Provide the log on Credentials of another ABAP system
10)click on save.
11)Click on Connection Test Button.
12)Click on Remote logon.
after that you will be connecting to the another ABAP system Remotely.(If and only if the Technical Settings which you provide are correct We can connect to other ABAP system)
If any error occur's please check your Technical settings and also Logon&Secirity which you provide.
Thanks.

Unable to capture error message while creating an SO using bapi

Hi,
Can anybody suggest how to capture the error message while creating a SO using BAPI.
I have developed a customeized BAPI and using the BDC format to create the SO.
Note: i am using a call transaction method for the BDC.
I am sending the message into message1.
but i am unable to send the same into an internal table
shyam.

Hi Shyam
If my understanding is correct, you are performing BDC process within the customized BAPI...
And you want to collect the messages from BDC to an internal table and pass to the output.
Proceed as below:
1. While calling BDC, use CALL TRANSACTION .... with addition: MESSAGES INTO itab. The structure of itab should be like BDCMSGCOLL.
2. Now the messages will be collected in ita.
3. Prepare the messages using FM: FORMAT_MESSAGE
4. Collect to the returning table.
Hope this helps...
Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
Kind Regards
Eswar

Error determining posting period(infostructure S008,Variant Z2,RC3) while creating Sales orders from Inbound IDOCS

Hello,
I am getting this Error message"error determining posting period(infostructure S008,Variant Z2,RC3)" while creating Sales order from Inbound Idocs in the IDOC,which is affecting sales order creation.
While viewing this Info structure S008, I could see no records have been maintained. Wanted to know the reasons behind this Hard error?
Is it something related to Date Field used in the Update Rules for this Infostructure which is causing this posting period error?
Appreciate your inputs on this.
Thanks and Regards
Mohammed Roshan

Thank you Jelena,I checked the Ship. Delivery dates in the IDOC which are for Current Fiscal Year- 20140703 and 20140711,Could there be any other reason for this error?
Could it be an issue with e Update rule in this Infostructire S008
Secondly when we try change the update rule thru MC25 for this Infostructure S008,It gives a message"
"Maintenance of SAP standard updates not allowed"
Kindly advice
Thanks and Regards
Mohammed Roshan

Time capsule won't back up - Unable to complete backup. An error occurred while creating the backup folder. Any ideas?

I have tried all the resets, the firmware is the latest version, the green light is on.
But I get this message "Unable to complete backup. An error occurred while creating the backup folder."
Any ideas?

Do setup again.. but make sure both your wireless and your ethernet have ipv6 turned on to local link.
Done this OK, but no idea about IPv6 - something new to me and rather Appley I think?
Unplug the WAN for the moment.. Just LAN port TC to the MBPr ethernet via thunderbolt.. (thunderbird was the kids puppet series.. Thunderbirds are go!!). Done - New real people Thunderbirds movie coming out soon I believe!!!
Reset the TC again.. sorry.. !! You're welcome ... done.
Make sure the ethernet now has an IP address.. 10.0.1.2 - Yep - done that - on ethernet anyway ...
You need to open the network preferences to find out. Yep - that's good ...
****** I then reconnect the TC WAN to the router - is this right?
And then I think I start going round in circles ... boot, reboot, restart, reboot again ...
The final result is green light on TC, but error message when trying TM is "Backup disk is not available".
Then open the airport utility and you should be able to setup the TC.
Do as little setup as possible and then run the TM backup and see how it goes.
I have managed to get Thunderbird to LAN on TC to create a folder on TC and copy a file onto it.
So I guess the drive is working - it must be the software, settings or perhaps even the operator that isn't quite so clever ...
I named network RFG, named device RFGTC. RFG network shown as IP 192.168.0.72
Wireless router is BT Homehub 3 with IP of 192.168.0.254 - is this issuing new IP addresses when rebooting TC?
I have three wireless networks here - the BT Homehub3 wireless, the TC wireless, and also a D-link power socket ethernet thingy for an ethernet connection to the telly - DHP-W310AV which is also wireless link. All are effectively connected to the BT Homehub - is there a conflict there?
Have several times achieved in Airport Utility schematic with internet shown as green, RFGTC shown as green, light on TC green, but no TM backup run ... "backup disc not available."
And there are no tall building around here to hurl myself off ... at least you can go to Sydney Harbour bridge - not too far away ... it was my son in Sydney that persuaded me to scrap Windows and go Apple ... it's all his fault ...

An error occured while creating the new dataset Could not get type informat

Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
My Path variable list the following:
C:\app\Administrator\product\11.1.0\client_1;
C:\app\Administrator\product\11.1.0\client_1\bin;
C:\oraclexe\app\oracle\product\10.2.0\server\bin;
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
C:\Program Files\Borland\BDS\4.0\Bin;
C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
C:\PROGRA~1\Borland\vbroker\jre\Bin;
C:\PROGRA~1\Borland\vbroker\Bin;
C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
C:\WINDOWS\system32;C:\WINDOWS;
C:\WINDOWS\System32\Wbem;
c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
C:\Program Files\java\jdk1.6.0_07\bin.
Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
Also noted that while deploying at client site I started gett'n this error:
"Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
Is it due to change in the production machine? Any help in this regard is greatly appreciated.

Hi Pushpa,
Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
Further,suggest you explore if the below resolutions can be adopted in your case.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
Regards,
Pradeepkumar haragoldavar

An error occurred while creating a Page Server subprocess.

I am using XI R2 SP5 on solaris.
When we try to view any report on demand or schedule any report that has a parameter, the following error comes back:
An error occurred while creating a Page Server subprocess.
I have tried restarting the services. I have tried creating a new page server. It behaves the same way. In other online forms, I've seen with this error message, people have talked about fixing it by installing SP2 or by uninstalling and reinstalling everything. We're at SP5, so we should have anything that was fixed at SP2. An uninstall and then reinstall would be a nightmare given the amount of use on this system.
Can anyone recommend anything at all? I'm about to have our unix admins reboot the server, but that is really nothing more than a stab in the dark. I saw someone else in an online posting claim that a reboot fixed the problem, but I've only seen that once.

checked this SAP Note?
1204013 - Error: "The Page Server is unable to create a child process" when viewing a Crystal report in InfoView on Solaris
Symptom
When trying to view a Crystal report in BusinessObjects XI Release 2 InfoView on Solaris, the following error message appears:
"The Page Server is unable to create a child process"
In the syslogs, you see the following error messages:
"An error occurred while creating a Page Server subprocess."
"The function PEOpenEngineEx failed. Reason: Report engine not opened."
"Internal error for dll procreport."
"Unable to load dll procreport."
"Internal Job Server error."
Cause
The following file in the MainWin registry has become corrupt:
bobje/enterprise115/solaris_sparc/crpe/mw/registry/core_data/servername/.mw/hklm_sunos.bin
This has become corrupt due to the web application server running under a different account than the BusinessObjects Enterprise applications.
Resolution
Restore the hklm_sunos.bin file using a backup of that file. The backup file must be from before the corruption occurred. Also ensure that your web application server and BusinessObjects Applications are running under the same user account.

A fatal error occurred while creating an SSL client credential. The internal error state is 10011.

Need help. I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client. It just prompts for password but will not
take it. I'm sseeing this on my front end server multiple times:
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
All my certs are good coming from internal CA. My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers. Issue only occurs when trying to connect using a lync 2013 client.
1 Login: FAIL (hr = 0x1)
this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
1.1 Get-NewWebTicket: FAIL (hr = 0x1)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
Rich

Hi,
Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
For the detailed IIS configuration, please check:
http://technet.microsoft.com/en-us/library/gg412871.aspx
As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
lyncdiscoverinternal.<sipdomain> Host (A) record and then
lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
More details:
http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Heap space error while creating XML document from Resultset

I am getting Heap space error while creating XML document from Resultset.
It was working fine from small result set object but when the size of resultset was more than 25,000, heap space error
I am already using -Xms32m -Xmx1024m
Is there a way to directly write to xml file from resultset instead of creating the whole document first and then writing it to file? Code examples please?
here is my code:
stmt = conn.prepareStatement(sql);
result = stmt.executeQuery();
result.setFetchSize(999);
Document doc = JDBCUtil.toDocument(result, Application.BANK_ID, interfaceType, Application.VERSION);
JDBCUtil.write(doc, fileName);
public static Document toDocument(ResultSet rs, String bankId, String interfaceFileType, String version)
 throws ParserConfigurationException, SQLException {
 DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
 DocumentBuilder builder = factory.newDocumentBuilder();
 Document doc = builder.newDocument();
 Element results = doc.createElement("sims");
 results.setAttribute("bank", bankId);
 results.setAttribute("record_type", "HEADER");
 results.setAttribute("file_type", interfaceFileType);
 results.setAttribute("version", version);
 doc.appendChild(results);
 ResultSetMetaData rsmd = rs.getMetaData();
 int colCount = rsmd.getColumnCount();
 String columnName="";
 Object value;
 while (rs.next()) {
 Element row = doc.createElement("rec");
 results.appendChild(row);
 for (int i = 1; i <= colCount; i++) {
 columnName = rsmd.getColumnLabel(i);
 value = rs.getObject(i);
 Element node = doc.createElement(columnName);
 if(value != null)
 node.appendChild(doc.createTextNode(value.toString()));
 else
 node.appendChild(doc.createTextNode(""));
 row.appendChild(node);
 return doc;
public static void write(Document document, String filename) {
 //long start = System.currentTimeMillis();
 // lets write to a file
 OutputFormat format = new OutputFormat(document); // Serialize DOM
 format.setIndent(2);
 format.setLineSeparator(System.getProperty("line.separator"));
 format.setLineWidth(80);
 try {
 FileWriter writer = new FileWriter(filename);
 BufferedWriter buf = new BufferedWriter(writer);
 XMLSerializer FileSerial = new XMLSerializer(writer, format);
 FileSerial.asDOMSerializer(); // As a DOM Serializer
 FileSerial.serialize(document);
 writer.close();
 } catch (IOException ioe) {
 ioe.printStackTrace();
 //long end = System.currentTimeMillis();
 //System.err.println("W3C File write time :" + (end - start) + " " + filename);
 }

you can increase your heap size..... try setting this as your environment variable.....
variable: JAVA_OPTS
value: -Xms512m -Xmx1024m -XX:PermSize=256m -XX:MaxPermSize=512m

CPI-C ERROR CM_PRODU while creating RFC destination from BW to R/3

Similar Messages

Maybe you are looking for