CPMBPC and POASBC Software Components on NWD

Hi were doing a patch upgrade for 2 software components CPMBPC and POASBC to 004. Does anyone know if they have any system dependencies?
Thanks for the help.
Gary

Best way to avoid the dependency issues is to use Maintenance Optimizer to download the stack.

Similar Messages

  • Error in Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

    Hello Everyone,
    I am a regular user of I-tunes but recently i dont know why but I got some error in Launching I-tunes. So as recomonded by "Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7" section. I started removing the products. But after removing Quick time, I tried to remove Apple Software Update but while uninstalling it gave error that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." and the uninstall rollbacks.
    Please send me a feasible solution to this problem.
    Thank You.

    Uninstalling the iCloud control panel should allow you to do that folder deletion.

  • (Windows 8.1) My iTunes takes a while to open, freezes and doesn't recognize any apple device plugged into it.  I've uninstalled iTunes and other software components in the order I was told but still end up with the same result.Why is that?

    Why is iTunes for Windows 8 (8.1) taking so long to boot up, not recognizing an apple device and freezing after a proper uninstall and reinstall?

    Hmm....I just had another thought.  All the machines are running Win7 SP1, BUT the 2 that can sync with MSE installed are 32bit versions, however the one that can't is 64bit.  Not sure if that makes any difference though.  All are clean installs with Win7SP1 media, not SP1 installed later.

  • Trying to Remove iTunes software components because of 11.1.4 update error and using Windows 7 uninstall Apple Mobile Device Support does not work. Any suggestions?

    Had error while updating Itunes to ver 11.1.4.  I had 11.1.3.8 previously. Following instructions for Removing and Reinstalluing iTunes and other software components. Was able to uninstall iTunes and Apple Software Update, but attempts to do the same under Control Panel failed for Apple Mobile Device Support (ver 7.0.0.117). Directioons say to uninstall components in order given so I cannot continue until Apple Mobile Device Support is removed. Any suggestions?

    Try reparing and then remove again if the repair is successful, otherwise move on to the next step. See  Troubleshooting issues with iTunes for Windows updates for more information.
    tt2

  • Duplicate Software Components Showing Up in XI

    Hello,
    While trying to do some maintenance, I deleted our main product from the SLD.  I then recreated the product and the software components that belonged in that product.  I then re-imported these software components into the Integration Builder.  Now I have two of each software component showing up in the system.  Does anyone know how I can correct this?
    Thank You.

    Refer the following help for
    SLD preperation very good:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
    Working with System Landscape Directory (SLD) :
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
    Configuring SLD in Sneak Preview SAP NetWeaver '04 Sneak:
    /people/sugree.phatanapherom/blog/2005/08/14/configuring-sld-in-sneak-preview-sap-netweaver-04-sneak
    XI Software Logistics 1: SLD Preparation:
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    Thanks,
    Kalenthirababu.p

  • CM Services stand alone (Unknown session NWDI and grey components in NWDS)

    Hello.
    We are trying to configure NWDI in portal 7.3  using the following document http://scn.sap.com/docs/DOC-14706 however when Im trying the syncrhonize step (page 22)  it shows me an error HTTP 400 Unknown session wherever I click in the sync page.
    I dont know if it's because of this missing step but when I import this in NWDS the dependencies are empty and when I try to create a develpment it shows me greyed components with the mistake ( Software component does not support this development component type. Required DCs are located in an SC that is not visible from the selected one.). If any more information needed please ask me.
    Thanks in advance.
    Alex.

    Thank you !!! it seems that is solved now, it shows me some components good to go, eventhe less When I try to create a Wevdynpro it says "Support component (ACH) for vendor ''sap_com'' is required" Could it be because of some missing DC ?
    Great answer thank you !!https://service.sap.com/sap/support/notes/1536755
    BTW that note lead me to this other one where I found this part that made the trick
    Note 1536755 - DC type is grayed out.
    What can be done?
    Check in SLD if references from the developed SC to the found required SCs
    exist. Create them if they are missing. . Update the corresponding track in CMS
    by first syncing current dependencies from SLD to CMS  ("Update CMS" in CMS UI
    Landscape Configurator - Domain Data) and then adapting the track in "Track
    Data" by  using "Synchronize SC Dependencies" - "Show Software Components out of
    sync with SLD", select all SCs shown as out of sync and press "Accept SLD
    Definition" and then save the track.  Switch to Transport Studio in CMS WebUI
    and check in and import the corresponding SCA files. After that update the
    development configuration in NWDS.

  • Summary report to show all the software components and version installed

    We are using 64bit Windows 2003 and Hyperion Planning and Essbase in 2 separate servers. I am not sure whether Windows can have a summary report to show all the software components and version installed and show it is 32bit or 64bit version installed?
    Thanks!

    Refer steps here to delete SC file.:
    http://support.apple.com/kb/TS2363
    Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

  • Products and software components not found in SLD?

    Hello All,
    I am trying to configure SLD for Retail (POS -XI Integration )Scenario using "SAP Business Package for Store Connectivity POS Integration
    I am trying a create a third party system for POS in SLD and  i am trying to assign products and software components (GM STORE CONNECTIVITY and STORE CONNECTIVITY)for this system.
    But i amot able to find the products and software components in the SLD.
    SAP (GM) POS system:
    Product (one of the following)
    SAP TRANSACTIONWARE GM 9.5
    SAP POS 1.0
    SAP POS 2.0
    Software Component Version (all of the following)
    XI CONTENT STORE CONNECT 2.0
    XI CONTENT GM STORECONNECT 1.0.
    what may be the reason?
    Thanks and best regards,
    Anil

    Hello All,
    I am trying to configure SLD for Retail (POS -XI Integration )Scenario using "SAP Business Package for Store Connectivity POS Integration
    I am trying a create a third party system for POS in SLD and i am trying to assign products and software components (GM STORE CONNECTIVITY and STORE CONNECTIVITY)for this system.
    But i am not able to find the products and software components in the SLD.
    SAP (GM) POS system:
    Product (one of the following)
    SAP TRANSACTIONWARE GM 9.5
    SAP POS 1.0
    SAP POS 2.0
    Software Component Version (all of the following)
    XI CONTENT STORE CONNECT 2.0
    XI CONTENT GM STORECONNECT 1.0.
    what may be the reason?
    Thanks and best regards,
    Anil

  • Packages and software components

    Hi everyone:
    I'am having problem with an interface going to my XI-system. This interface works OK in another XI-system, because of that I think the problem are the packages or the software components installed in my XI-system.
    Can somebody tell me if this two configuration are compatible?the levels(010,009...) are importants????
    My XI-system patches:
    __________________My XI______________________________
    SAP_BASIS     640          0010     SAPKB64010     SAP Basis Component
    SAP_ABA          640          0009     SAPKA64009     Cross-Application Component
    PI_BASIS     2004_1_640     0006     SAPKIPYI66     Basis Plug-In (PI_BASIS) 2004_1_640
    SAP_BW          350          0009     SAPKW35009     Business Information Warehouse
    ______________The another one XI________________________
    SAP_ABA          640          0015     SAPKA64015     Anwendungsübergreifende Komponent
    SAP_BASIS     640          0015     SAPKB64015     SAP Basiskomponente
    PI_BASIS     2004_1_640     0010     SAPKIPYI66     Basis Plug-In (PI_BASIS) 2004_1_640
    SAP_BW          350          0000         -         Business Information Warehouse
    Thanks

    Hi:
    The error in the sm21 is the following:
    <b>Transaction cancelled IDOC_ADAPTER 601 (SAPGET 100)</b>
          in details I can see this:
    <b>No sevice for system SAPGET, client 100 in Integration directory. No documentation exist for message ID601.</b>
        In The sld and in the integration diretory is created this bussiness system.

  • Blogs,Forums Relating to SLD and Software Components

    Hi People,
    I have recently joined the integration space in SAP XI, I want to understand XI from the basics, I am very much unclear on the SLD, software components, software component versions, technical and business system concepts. Request you to please share me with forums and blogs relating to the same.
    Thanks
    Varun.

    HI,
    Refer
    SAP Network Blog: SLD: General recommendation how to set up the system landscape directory
    SLD: General recommendation how to set up the system landscape directory
    SAP Network Blog: An overview of the documentation required to set up the system landscape directory (SLD) of SAP NetWeaver
    An overview of the documentation required to set up the system landscape directory (SLD) of SAP NetWeaver
    System Landscape Directory of SAP NetWeaver 7.1 User Manual
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b09fe69e-46be-2a10-9fb0-9c11aeaa3557
    System Landscape Directory of SAP NetWeaver 7.1 - Post-Installation Guide
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/500519bb-75bd-2a10-c9b7-878798ae52bc
    System Landscape Directory: Planning Guide
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0a1a8fb-0527-2a10-f781-8b67eab16582
    Architecture Overview of the SLD Data Suppliers
    http://help.sap.com/saphelp_nw04s/helpdata/en/8a/361fb70681234fb7d3af841ec2383e/frameset.htm
    System Landscape Directory
    http://help.sap.com/saphelp_nw04s/helpdata/en/31/f0ff69551e4f259fdad799a229363e/content.htm
    Thanks
    swarup
    Edited by: Swarup Sawant on Aug 12, 2008 8:34 PM

  • Software Components for BW-IP and PAK

    Hello Experts,
    I would like to know what all would be different Software Components which we need to install to work with BW-IP and PAK.
    I believe that SAP BW7.4 SP5 is the one to work on BW-IP. Is that the latest version ?
    If I'm not wrong, we need BPC license for PAK. Does that mean we need to install BPC 10.1 ?
    Let me know, if I'm missing any software components.
    Thanks,
    Jomy

    Hi Jomy,
    for BW-IP with PAK you only need BW on HANA, most recent version is 7.40, SP06. For PAK you need a BPC license but this does not mean that you have to install the BPC Add-On.
    With BPC 10.1 BW-IP with PAK objects can also be used in BPC Environments of type 'unified'. Thus you get BW-IP, PAK engine with BPC features like work status, BPFs. For more details cf.
    Unifying BPC NW and BW-IP
    Regards,
    Gregor

  • Software Components and Products

    Hi,
    I am new to XI.
    There are many software components and products available in SLD. I wanted to know which site should I visit to determine the functions or get details of each products and software components.
    Edward

    Hi,
    about Software Product and component go thru this part of SAP help-
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a2/2999ef97ea2b4790165f9ca5c05c41/frameset.htm
    All standard SAP products and software components are shipped by SAP (SRM etc)
    If you are planning to create a customer speicific components for the SAP SWCV, then create your own thridparty product based on SAP product, and then work on it. Now you can use dependency if you want make use of standard SAP delivered content.
    Generally , thirdparty product is created based on the vendor and all the swcvs are created under that. Then all IR objects follow the same.
    Have a look into this blog to get some hints-
    /people/thorsten.nordholmsbirk/blog/2006/07/25/structuring-integration-repository-content--part-1-software-component-versions
    regards
    manoj kumar

  • Naming conventions/hierarchies for products and software components

    Hi,
    Can someone please advise what they have found works well for naming products and software components and recommended hierarchies?
    Following the SAP model it seems to make sense to have a custom product for each SAP product when we are developing custom interfaces for the related system, e.g. ZPRODMYCOMPDEVS_R3, ZMYCOMPDEVS_CRM etc.
    Beneath this level as similar convention could be used for the software component, e.g. ZSWCMYCOMPDEVS_CRM or if it is a modular SAP system like R/3 perhaps a grouping per key application area? (e.g. HR, Finance, Logistics etc)
    I know it's not compulsory to start these with 'Z' but it would help group custom developments.
    Any advice greatly appreciated.
    Alan

    Hi,
    Please refer to this blog...
    /people/michal.krawczyk2/blog/2005/04/09/xi--saps-document-templates
    that is mentioned in the thread
    Name space
    Regards,
    Bhanu

  • Transporting Products and Software components

    Hi ALL,
    I have two new products for which I have created the export file to be imported into the target system. The target system already contains few other products and Software components. Is it true that the new export file from source system will over write all entries in the target system?? or will it be an append ??
    The " How to handle SLD for XI" doc tells that it will overwrite..I am a little concerned as there has been no SLD transports done in these boxes and all products currently  in the target box have been manually created.
    -Ken

    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation

  • Java API's supported in the Jdeveloper, IAS, and RDBMS product components

    If there are any technical errors or "mistatement of the facts" in this posting, please let me know about them ..
    This article is being delivered in Draft form and may contain
    errors. Please use the MetaLink "Feedback" button to advise
    Oracle of any issues related to this article.
    PURPOSE
    This article describes the "Enterprise Java Beans" (EJB), "Java Server Pages"
    (JSP) and servlets Application Programming Interfaces (API) supported by the
    Oracle products, Jdeveloper, Internet Application Server (IAS) and the Oracle
    RDBMS release 2 and release 3, also known as Version 8.1.6 and 8.1.7,
    respectively.
    SCOPE & APPLICATION
    All parties interested in the Java API's supported by these products.
    Java API's supported in the Jdeveloper, IAS, and RDBMS product components
    JDEVELOPER
    JDEVELOPER is Oracle's Java development tool designed for coding / development,
    testing / debugging, and deployment of Java Applications to the IAS and
    RDBMS platforms.
    With the java software api's being in a constant state of evolution, each new
    release of Jdeveloper adds support for the "then current" version of the java
    software api's, if it does not already have it implemented.
    JDEVELOPER SERVLET API JSP API EJB API
    VERSION VERSION VERSION VERSION
    3.2.X.X 2.2 1.1 1.1
    3.1.X.X 2.1 1.0 1.0
    NOTE :
    Sun Microsystems and their advisory teams (Oracle is on it) is working on
    "draft" specifications for the next version of all of these API's
    EJB -------> http://java.sun.com/products/ejb/index.html
    JSP -------> http://java.sun.com/products/jsp/index.html
    Servlets --> http://java.sun.com/products/servlet/?frontpage-javaplatform
    It is anticipated that future releases of Jdeveloper will continue to be
    upgraded to include support for the next version of each api.
    To obtain the latest information on Oracle's Internet Development Suite (IDS)
    of tools, please review the "Internet Developer Suite" information located
    on Oracle's technet web site at :
    http://technet.oracle.com/products/index.htm
    IAS
    IAS is Oracle's next evolution of the web server and application server
    product technology superceeding the Web Application Server (WAS) and Oracle
    Application Server (OAS) product lines.
    IAS SERVLET API JSP API EJB API EJE VERSION
    VERSION VERSION VERSION VERSION SUPPORTED
    9I(1.0.2) 2.2 1.1 1.1 817
    8i(1.0.1-NT) 2.0 1.0 1.0 816
    8i(1.0.0-UNIX) 2.0 1.0 1.0 816
    The IAS product contains two Java Virtual Machines (JVM) within it's
    architecture.
    They are called :
    1) APACHE JSERV servlet engine
    2) ORACLE ENTERPRISE JAVA ENGINE (EJE)
    APACHE JSERV servlet engine
    The APACHE JSERV servlet engine is an EXISTING product licensed from the
    apache group which supports the servlet api 2.0.ONLY.
    The APACHE JSERV product does not support ANY JSP's unless the customer
    installs a third party jsp engine.
    The IAS 8i/9i which has the APACHE JSERV product embedded in it, comes with
    Oracle's JSP engine (OJSP) already integrated into it. OJSP supports JSP's up
    to the specific JSP engine version documented in the Oracle Universal
    Installer (OUI) for the 8.1.7 RDBMS or the IAS products. It is also documented
    in the product's release notes.
    Oracle ENTERPRISE JAVA ENGINE (EJE)
    The EJE formerly known as :
    1) Oracle 8i Java Virtual Machine (JVM)
    2) JSERVER component,
    3) Aurora JVM
    was originally releas ed in the RDBMS 8.1.5 database with jdk 1.1.6 based java
    support.
    The currently supported versions of the Oracle 8i RDBMS, versions 2 and 3,
    also known as Version 8.1.6 and 8.1.7, respectively, provides a jdk 1.2.1
    based java virtual machine support.
    "EJE" Version 816
    This EJE, found in rdbms 8.1.6 and IAS 8i, contains support for the ejb
    api 1.0, corba, and java stored procedures.
    "EJE" Version 817
    This EJE, found in rdbms 8.1.7 and IAS 9i, contains support for the ejb,
    corba, and java stored procedures as well as the Oracle Servlet Engine (OSE)
    which provides support for the servlets 2.2 api and JSP 1.1 api.
    Note :
    EJB support in the "EJE" Version 817 has been upgraded to comply with the EJB
    1.1 api specification which includes "entity beans" support.
    What is the bottom line ??
    1) Servlets deployed to the APACHE JSERV must comply with servlet api 2.0.
    2) Servlets 2.1 or higher are only supported in EJE's OSE component found in
    the rdbms 817 or ias 9i products. Servlets api 2.0 can also run in the OSE.
    References
    1) "Oracle9i Application Server Technical White Paper" located at :
    http://technet.oracle.com/products/ias/pdf/9ias_102.pdf
    2) "Whats New? Oracle8i JVM Accelerator, Oracle Servlet Engine, OracleJSP ..."
    located at :
    http://technet.oracle.com/products/oracle8i/pdf/504.pdf
    3) "Oracle8i Release 3 New Features Summary" located at :
    http://technet.oracle.com/products/oracle8i/pdf/8iR3_nfs.pdf
    null

    which jvm is used by jserv ?? EJE or a separate jdk ?
    The Jserv servlet engine is running in a separate jdk JVM external to the EJE jvm which is embedded within the "database" component of ias and the RDBMS.
    See the reference below for more details ...
    if jserv only support old apis, why it is in oracle's products ?
    i would assume that the oracle servlet engine was under development when ias 8i was released and became available in time for the ias 9i and rdbms 817 products.
    looking back in history leads me to believe ias 8i was a migration path to get to ias 9i or rdbms 817.
    Based upon the long history of new releases of every oracle product being upgraded with new features, it's reasonable to assume that these products will continue to evolve.
    when I deploy a jsp how to deploy in the right servlet container ("EJE") ?
    as documented in the reference below, you can deploy JSP's to either the apache jserv jvm or the EJE since the ORACLE JSP engine functionality is in both jvm's.
    there are many posts where you can see that people have deploy in jserv and they have problems because they don't use the right container (servlet 2.0 instead of
    servlet 2.2) http://technet.oracle.com:89/ubb/Forum2/HTML/006349.html
    when ias 8i came out this was clearly an issue since servlet support was at api 2.0, and the current servlet api was probably at 2.1.
    oracle clearly made every effort to get ias 9i released quickly to supply a servlet 2.1 and 2.2 capable engine to resolve this issue.
    since ias 9i and rdbms 8.1.7 are available this is no longer an issue.
    The reference below explains the architecture and understanding it would eliminate a lot of "deploy to the wrong ias 9i component" issues.
    so why jserv is bundled with oracle 8i/9ias since EJE support the right api version ?
    if in ias 9i release , oracle had removed the jserv component without any advance warning, many customers would have been very upset since oracle makes every attempt to give advance notice before removal of functionality.
    References
    1) "Oracle9i Application Server Technical White Paper" located at :
    http://technet.oracle.com/products/ias/pdf/9ias_102.pdf

Maybe you are looking for