Cproject Integration with BW ( Querys )

Hi gurus,
In Cproject i could get detailed information of a particular project by the status Report, but as i mentioned it´s only for a particular project.
I´m testing with  BW integration but i´m dealing with some problems.
When i execute a standard querys eg. 0CPR_C01_Q0006, i get incomplete information because the phase and the task of every proyect are with '000000000000000000000' (empty), but the project name / description / responsible resource appears.
Can anybody help me with this?
Thanks for all.
Regards,
Diego

Hi Diego,
              I am interested in BW integration with cProjects. But as of now i dont have much understanding on how it is working. Can you explain the way it is working. I am not able to find anything related to this. What is the transaction code to view/execute the queries available.
regards,
rajesh.

Similar Messages

  • CProjects integration with R/3 HR issue

    Dear All,
    We are replicating the HR details to cProjects (CRM) system.
    The replication was happening fine and while the employees(resources) getting replicated to the cProjects system, a Business Partner (BP) number will get generated automatically for each and every employee.
    All of a sudden, we have got an issue.
    While the details are getting replicated to the cProjects system, but the BP number is not getting generated, the BP number is blank.
    FYI: We have not done any changes to the cProjects system recently.
    Will really appreciate your clues.
    Thanks,
    Vijay Anand

    Hi,
    We did all these settings. Just now we found out issue behind this.
    In r/3 table PA0000 employees with the status 0-withdrawn are not downloaded to crm. In this table status of the employee should be active, then only it will download employees to crm.
    Now the issue is client asking us to download employees who quit the organization.  Please suggest if we need to add any filter to download employees who already quit the organization to crm.
    Becuse there are some relationships existed for these employees earlier. When we try to download relationships from r/3 all bdocs are comming to crm and sitting in queues. Showing error. If we can download the employees who left the organization our issue with relationships also got solved.
    Regards,
    Madhu.

  • CProject integration with MS Project

    Hi,
    Bascially can we upload MPP file directly to cProjects, if so what are the settings that we need to do.Do you have any documents which provide this information.
    Normally i heard that MPP files gets converted into XML and this file is generally upload and direct upload from MPP file is not supported, is this correct.
    Regards,
    Srikanth ( [email protected])

    Hi Rehman,
    Thanks for your response, i will wait for your documents.
    I have following questions and here is the business scenario.
    customer download cProjects to MSProject.
    now if he uploads same MSProject to cProject , it will result in simulation version
    can we bypass this simulation version and update directly to operational version.
    is it possible to provide your contact number to discuss this requirement.
    Regards,
    srikanth.([email protected]).

  • MS Project Integration with cProjects

    Dear All,
    We are testing the MS Project Integration with cProjects 4.0. We have 1 query.
    While importing the Project from MS Project to cProjects if changes are done then it creates the new project in cProject system.
    Is it the standard MS Project Integration functionality ? We want the system to update the cProject only for the changes after Import is done. Can we get this ?
    Thanks & Regards
    Ashish Kulkarni

    The system will create a new project only if you have cleared the Project ID field (in MS project).
    Else (if you do not change the Project ID field), the system creates a simulation with the standard system provided simulation for the project.
    Once you have the simulation ready (in cProjects), you are supposed to reconcile the operational project (main project in cProjects) with this simulated copy to bring the updates/changes into effect.
    Hope this helps...

  • FI/CO integration with PM, PS, MM modules

    Hello,
    Any body have information about ' FI/CO integration with PM, PS, MM modules
    Could you please some explore above topic
    Thanks,
    Alex

    HI Luciano,
    It works as designed because of the following reasons:
    1. The WBS ID in ERP system must be unique.
    2. The phase-id in the cProject is NOT unique, you have e.g. same phase-id for two phases.
    That is why the replication does not use the phase-id to create the WBS ID.  The internal ID of phase is (default ID during creation of a phase) is used for replication
    Though there is a Badi method let you change the the WBS ID, but I would not recommend you to do it because of above reasons.
    Kind regards,

  • BEx Integration with different source systems

    Hi All
    I know we can create BEx querys on top of an infoprovider. But instead of storing data into BW and creating reports using BEx tools can we integrate BEx with the other source systems.  Like Business Objects tool which can be integrated with different sources. My client wants to know whether we can integrate with BEx for the following
    Support data source -- SAP BW
    Support data source -- Oracle
    Support data source -- MS SQL Server
    Support data source -- MS Access
    Support data source -- MS Excel
    Support data source -- ASCII Text files
    Support data source -- XML/XSD
    Support data source -- Web Services
    Support data source -- SAP R/3
    Support data source -- BO Universe
    Thanks for letting me know your opinions

    Hi,
    in theory you can. You will still have a virtual provider on top of your Infosource which will be connected to your datasource; thus you'll have to create the structures; you'll have to load master data as well... so not so nice solution if you think that at this stage, the storage will be the less of your costs....
    How are you going to deal with R/3 data?? I mean a great advantage of BW is really when you have an R/3 behind...
    I'd rather consolidate all these disparate datasources using the Visual compsoer which can get this data out of nearly an datasource and merge them in one single report; in theory again you could implement all BEx functionalities but at which cost and effort??
    Weird that a customer is asking such a question because it is usually the other way around: use SAP BW data in another front-end... by the way SAP is going to acquire BO soon....
    hope this helps...
    Olivier.

  • Integration with cFolders

    Hi all,
    How to integrate cFolder with Microsoft Windows File Explorer Practically.
    I used transactions CFI01 , CFE01  for Back-end Integration since i don't know how to create a cProject and cFolder i cant proceed can anyone help me to come out of this problem.
    Thanks in advance.

    Hi Shounak
    As I have a problem regarding the integration with windows explorer and C folders, I have taken this chance to enter this conversation.
    First of all I have done the acticities that you have stated:
    1. Activate the SOAP handler in the SAP Web Application Server, by activating the
    /sap/bc/soap/rfc node in transaction SICF.
    2. Execute the Specify URLs for Windows File Explorer Integration activity in Customizing
    for Collaboration Projects.
    The activity is also relevant to cFolders.
    3. Assign the users who are to work with the Windows File Explorer the appropriate RFC
    authorization in the user profile.
    Function group CPRO_API
    Authorization object S_RFC
    4. Activate the function in your personal settings as the user and execute the installation
    file:
    The only thing, that I haven't been able to do os to assign the function group CPRO_API. I have asked my authorization contacts, but they couldn't help me.
    Can you tell me how to do this?
    Furthermore I have a problem when trying to upload a document from my windows explorer. Even though it says that the upload has been succesfull, no update is happening when I look in the C folders application.
    Thanks for your help in advance
    Maria

  • XRPM and cProjects Integration

    Hi!
    Has anybody got any docs on how cProjects can be integrated with xRPM..how cProjects project can be tranfered in xRPM?
    My email address is [email protected]
    Thanks in advance!
    Alex

    Hi,
    yes, the integration is permanent.
    For Example....
    During transfer of work centers from Project System to xRPM, teams are created in xRPM for each of the work centre being transferred to xRPM. One can do this from SAP PLM PS by running the report RPM_WRKCNTR_UPLOAD,
    which transfers work centers to SAP xRPM and uses them to create team master data. The team name in xRPM is generated using a combination of plant and work center, because the work center ID is only unique within a plant and can be used again in a different plant.
    The resources assigned to the work center are used to create the resources assigned to teams in SAP xRPM. The employee IDs of resources in SAP PLM PS are used to search for business partners in SAP xRPM with identicalemployee IDs.
    If a match is found, the business partner is added to theteam.
    If the SAP PLM PS work center is created using organization units, the employees in the organization unit are derived during the transfer of the work center and used as the basis for creating teams. If new employees are added to the organization after you have run the report, these employees are not included in SAP xRPM system unless you run the program again. For
    this reason, you should run the program regularly (for example, weekly) or schedule it for background.
    Hope it helps you.
    Thanks
    Arbind

  • XRPM-cProjects Integration

    Hi..
    Has anybody got any docs on how cProjects can be integrated with xRPM..how cProjects project can be tranfered in xRPM?
    Thanks,
    Mateen

    My mail ID is [email protected]

  • OIM 9.1.0 Integration with Active Directory 2008 R2

    Hi,
    My customer is running Root/Child AD structure based on windows 2003 w/SP2, OIM 9.1.0 deployed under one of the child domains, and integrated with child domains controllers which runs windows server 2003 as well.
    My customer has decided to upgrade his AD to Windows Server 2008 R2 domain controllers across the entire AD Forest and still wants to integrate the current OIM v9.1.0 with AD for all of his Users provisioning and password synchronizations.
    Am not sure if current OIM version of OIM 9.1.0 is compatible and supported by OIM v9.1.0 under active directory version 2008 / R2, and not sure if it can be integrated with such AD version.
    Any guidance is really appreciated.
    Also I was thinking of such scenario but also not sure of its support ability and if OIM will keep working on such scenario, the scenario is to upgrade only the AD root domain to Windows 2008 R2 while keeping the child domain holding the OIM 9.1.0 at Windows 2003 version.
    Is this a working and supported scenario by OIM v9.1.0 ?

    I believe you question should be if the connector supports this architecture. Check out the versions supported for the connector you are using and you should be good.
    -Bikash

  • Service desk integration with 3rd party tool

    Hi all,
    I've problems understanding the setup of connecting a 3rd party service desk tool with solman itsm.
    So far it's clear that I need to activate and configure the service provider and consumer in soamanager.
    The webservice then will be called by the 3rd party tool with corresponding data.
    However, according to spro I need to define a value mapping for incoming/outgoing calls.
    I do not understand this mapping... the WSDL of webservice ICT_SERVICE_DESK_API contains lots of fields, but in spro -> value mapping I can only define the following fields (which are hard coded in type pool AIICT):
    SAPCategory
    SAPComponent
    SAPDatabase
    SAPFrontend
    SAPIncidentID
    SAPIncidentStatus
    SAPInstNo
    SAPOperatingSystem
    SAPSoftwareComponent
    SAPSoftwareComponentPatch
    SAPSoftwareComponentRelease
    SAPSubject
    SAPSystemClient
    SAPSystemID
    SAPSystemType
    SAPUserStatus
    What about attachments, priority etc.?
    Will the interface parameters mapped to these ones?
    For what purpose do I need to maintain the value mapping?
    Can you give me a hint?
    Regards, Richard Pietsch

    can you please check the WIKI Solution manager Service Desk Integration with third party service desk - SAP Solution Manager - Security and Authorizat…

  • Java Stack mandatory for a SAP BI system integrated with EP?

    Hi Guru's,
    Currently we are using SAP NetWeaver 2004 s version 7.0 system for our BI.
    This is integrated with the EP. But our BI system does not contain the Java Stack installed.
    When we work on WAD templates and execute  the template, it is automatically directed to EP portal where we can see our reports.
    Here my question is do we need Java Stack for this system to use ADOBE DOCUMENT services or can it work with EP only for the web functionalities.
    Any info on this is of great help.
    Best Regards
    Kumar

    HI Reddy,
    We came to know from our basis team that we do not have the Java Stack installed in our BI 7.x system yet.
    As it is integrated with EP which has Java, our web reports are working.
    1) But my question is still do we ned to install the Java Stack in our BI system as i do not find any Export to PDF option in EP for the reports (eventhough AS Java supports this).
    2) Or can we use the existing configuration without Java STack integrated to EP for the new tools like Report Designer and Integrated Planning?
    Regards
    Kumar

  • Session keep Alive when EBS is integrated with OIF acting as SP

    We have an E-Business Suite R12(12.1.3) Application which is integrated with Oracle Access Manager 11.1.1.5. For authentication the Oracle Access Manager delegates the authentication request to Oracle Identity Federation acting as a Service Provider (SP). There is a home-grown SSO which acts as the Identity provider by Federating it with OIF using SAML 2.0 protocol.
    The integration is successful and EBS is able to authenticate using this third party SSO.
    Now there are multiple applications which are integrated with this third party SSO and the user can access any of these applications including EBS.
    Considering a scenario where a user is using EBS Application say for more than 30 mins. Now when he tries to login to another application the challenge screen is thrown though he can continue to work on EBS without any issue. The reason being that the session timeout on the IDP side is set to 30 mins.
    To overcome this issue the solution that has been thought of using a javascript for each page load on the application which will update the SSO token with the latest UTC time on the IDP server. This has been successfully done for all other applications except EBS.
    So my question is how we can call this java script for each page load for EBS?
    Thanks & Regards
    Sarbashis

    It appears that OAM is removing the url parameters for the p_done_url sent to it by OIF.
         302 Redirect to -> Location: https://sso.mycompany.com/oam/server/logout?p_done_url=https%3A%2F%2Fsso.mycompany.com%2Ffed%2Fuser%2Fsloosso%3Fid%3Dosso%26type%3D3&invokeOSFSLogout=false
         Result: 200. Set-Cookie OAM-ID to expired.
    Form Submits: https://sso.mycompany.com/fed/user/sloosso
    Result: 500 Error
    Notice the p_done_url value in the redirect has extra parameters which when the Form is submitted are lost.
    If I manually enter the url: https://sso.mycompany.com/fed/user/sloosso?id=osso&type=3&invokeOSFSLogout=false
    Then I am successfully logged out.
    This seems almost like a bug in OAM...

  • RE: Legacy Integration with PI/Open

    Greg -
    We are currently working on wrappering the APIs for UniVerse (aka Pick on
    UNIX).
    We received some help from the guys at RTD in Denver.
    We tested out a C program that uses the Universe APIs and it works fine.
    We will be building the Forte piece and compiling it this week.
    Our first application is to inquire the UniVerse data, after that is
    successful, we will move to inserting & updating.
    Let us know how we can help.
    Larry McCartney
    [email protected]
    (203)459-7959 - Trumbull
    From:
    [email protected][SMTP:[email protected]
    om]
    Sent: Monday, October 12, 1998 11:00 AM
    To: [email protected]
    Subject: forte-users-digest V1 #1111
    forte-users-digest Monday, 12 October 1998 Volume 01 : Number
    1111
    In this issue:
    Legacy Integration with PI/Open
    is OBB32.dll available
    Java Integration
    Java Integration
    Re: Legacy Integration with PI/Open
    RE: Forms That Will Not Close
    RE: Forms That Will Not Close
    RE: Forms That Will Not Close
    Re: AfterValueChange event trigged when it shouldn't be...
    math library
    From: [email protected]
    Date: Mon, 12 Oct 1998 09:49:56 +1000
    Subject: Legacy Integration with PI/Open
    This is a bit of a long shot, but has anyone experience with integrating
    Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
    to read and update a PI/Open database from within our Forte application,
    and we would be most interested to hear from anyone who has experience in
    doing this.
    We are aware of a set of APIs provided with PI/Open that are written in
    "C". We could wrapper these from within Forte, however the issue is that
    the APIs provided are non-shared, and Forte requires shared libraries.
    Thanks in advance for any help.
    Greg Barber.
    The information transmitted is intended only for the person or entity to
    which it is addressed and may contain confidential and/or privileged
    material. Any review, retransmission, dissemination or other use of, or
    taking of any action in reliance upon, this information by persons or
    entities other than the intended recipient is prohibited. If you
    received
    this in error, please contact the sender and delete the material from any
    computer.
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: "sridhar t" <[email protected]>
    Date: Sun, 11 Oct 1998 22:01:36 PDT
    Subject: is OBB32.dll available
    hi,
    am working on forte3.0.G.2. when i tried to use objectbroker library i
    am unable to find the runtime objectbroker library (OBB32.dll). is this
    dll available with this version. if not is there any alternative.
    thanks,
    sridhar,
    Goldstone Softech USA
    Get Your Private, Free Email at http://www.hotmail.com
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: srinivasa gopi <[email protected]>
    Date: Sun, 11 Oct 1998 23:12:22 -0700 (PDT)
    Subject: Java Integration
    Hello,
    I'm trying to integrate Forti with Java in Java mode using IIOP.I
    followed the steps as explained in the Forti Web enterprise manual.I
    compiled the Java files that are generated by Forti along with the
    client Java file.The Java applet is getting downloaded on the client
    browser(IE 4.0), but the problem is browser is giving an exception
    ** Java.lang.RuntimeException can't connect to service object with
    the ior file name **.
    My question is on every client is it necessary for ORB(Visigenic for
    Java 3.2) and also the Forti Java interoperability package that is
    provided by the Forti for compatability with Java or it is not
    required on the clients ?
    Is there any other alternative to achieve the goal as this will give
    wide access to the Forti service objects through Web Browser clients.
    Please mail me the solution to this problem as early as possible it is
    very urgent.
    Thanks in advance,
    Srinivasa Gopi,
    Goldstone Softech USA
    DO YOU YAHOO!?
    Get your free @yahoo.com address at http://mail.yahoo.com
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: srinivasa gopi <[email protected]>
    Date: Sun, 11 Oct 1998 23:26:26 -0700 (PDT)
    Subject: Java Integration
    Hello,
    I'm trying to integrate Forti with Java in Java mode using IIOP.I
    followed the steps as explained in the Forti Web enterprise manual.I
    compiled the Java files that are generated by Forti along with the
    client Java file.The Java applet is getting downloaded on the client
    browser(IE 4.0), but the problem is browser is giving an exception
    ** Java.lang.RuntimeException can't connect to service object with
    the ior file name **.
    My question is on every client is it necessary for ORB(Visigenic for
    Java 3.2) and also the Forti Java interoperability package that is
    provided by the Forti for compatability with Java or it is not
    required on the clients ?
    Is there any other alternative to achieve the goal as this will give
    wide access to the Forti service objects through Web Browser clients.
    Please mail me the solution to this problem as early as possible it is
    very urgent.
    Thanks in advance,
    Srinivasa Gopi,
    Goldstone Softech USA
    DO YOU YAHOO!?
    Get your free @yahoo.com address at http://mail.yahoo.com
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: Tim Hagemann <[email protected]>
    Date: Mon, 12 Oct 1998 09:21:06 +0200
    Subject: Re: Legacy Integration with PI/Open
    Greg,
    This is a bit of a long shot, but has anyone experience with integrating
    Forte with PI/Open. PI/Open is a variant of PICK. We have arequirement
    to read and update a PI/Open database from within our Forte application,
    and we would be most interested to hear from anyone who has experiencein
    doing this.
    We are aware of a set of APIs provided with PI/Open that are written in
    "C". We could wrapper these from within Forte, however the issue isthat
    the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
    You could write a dll (on windows) or shared library (on unix) wrappering
    the
    original,statically linked "C"-Libs. This lib could be used by Forte.
    Tim Hagemann
    Tim Hagemann
    Ascom GmbH Email: [email protected]
    Charlottenburger Allee 61 Phone: +49 241 96806 273
    D-52068 Aachen Fax: +49 241 96806 225
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: "Rottier, Pascal" <[email protected]>
    Date: Mon, 12 Oct 1998 09:38:25 +0200
    Subject: RE: Forms That Will Not Close
    Exiting the event loop will not close the window! Invoking
    'Close' method on the window will. Check if this method
    is executed. It appears, the AfterFinalize event exits the
    event loop and nothing more. Then, your applications
    waits for some event from your main window, like 'Mouse-
    Enter', before invoking Window.Close().
    Pascal
    Hi,
    We seem to be having some type of deadlock problem when trying to
    close
    forms and am wondering if anyone else has experienced this problem.
    The
    phenomenon does not always occur and is not specific to any one client
    machine.
    I will explain the phenomenon:
    1. We have an object that contains our main application startup
    method.
    This method then instantiates our main application window (Control)
    and
    invokes the Display() method using start task.
    2. All other forms created by the application are created using a form
    manager service object which exists on the client partition. The form
    manager has a CreateForm() method which instantiates a form class of
    the
    specified type and invoked the form's Display() method using start
    task.
    3. Each form has a Close push button which when clicked invokes
    Window.RequestFinalize().
    Now, the problem we have is this:
    The user starts the application and the main application window is
    displayed. The user then selects an option from the main window and a
    child form is created using the form manager service object and is
    displayed. The user can continue to create more child forms by
    selecting
    options from the main window and all child forms are instantiated and
    displayed correctly.
    However, when the user attempts to close one of the forms the form
    does
    not close. The finalize event is triggered and the event loop is
    exited,
    but the form continues to be displayed and does not close. If the user
    then moves the mouse pointer over the main application window, the
    child
    form immediately closes. Moving the mouse cursor over other child
    windows (or even the desktop) does NOT do this - only when the mouse
    cursor is moved over the main window does the child form close.
    Does anyone have any ideas on this?
    Regards,
    Jace.
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive
    <URL:http://pinehurst.sageit.com/listarchive/>- -
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: Jason de Cean <[email protected]>
    Date: Mon, 12 Oct 1998 17:47:20 +1000
    Subject: RE: Forms That Will Not Close
    Hi Pascal,
    The Display() method is as follows:
    self.Open();
    event loop
    when Window.AfterFinalize do
    exit;
    when task.Shutdown do
    exit;
    end event;
    self.Close();
    <end>
    Are you saying we should do a Window.Close() in there somewhere as well
    Regards,
    Jace.
    On Monday, 12 October 1998 17:36, Rottier, Pascal
    [SMTP:[email protected]] wrote:
    Exiting the event loop will not close the window!
    Invoking
    'Close' method on the window will. Check if this method
    is executed. It appears, the AfterFinalize event exits
    the
    event loop and nothing more. Then, your applications
    waits for some event from your main window, like 'Mouse-
    Enter', before invoking Window.Close().
    Pascal
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: "Rottier, Pascal" <[email protected]>
    Date: Mon, 12 Oct 1998 11:04:24 +0200
    Subject: RE: Forms That Will Not Close
    Jason,
    No, self.Close() should close the window. This is the
    method I referred to. You could place a traceline
    behind self.Close() to see if it is executed. It is not
    inconcievable some exception may exit the Display()
    method before self.Close() is executed.
    After that, maybe, some events from your main
    window trigger something that causes a call like 'My-
    Window.Close()', where 'MyWindow' is a subclass of
    'UserWindow', so 'MyWindow' gets closed after all.
    Maybe you've overridden 'Close()', so now it doesn't
    work properly anymore.
    Are you sure you exit the event loop after you press
    the close button?? The display method is not regis-
    terred for any <PushButton>.Click event, though maybe
    you just didn't include the full Display method in your
    mail.
    Remember that an event loop will only respond to an
    event if it is not currently handling an event. So, the
    method behind <PushButton>.Click may call a self.
    Window.RequestFinalize(), which will cause an After-
    Finalize event to be posted, which will be placed in
    the event queue. If this method however keeps waiting
    for something, the event loop will not respond to the
    AfterFinalize event, until this method is done waiting.
    Pascal.
    Hi Pascal,
    The Display() method is as follows:
    self.Open();
    event loop
    when Window.AfterFinalize do
    exit;
    when task.Shutdown do
    exit;
    end event;
    self.Close();
    <end>
    Are you saying we should do a Window.Close() in there somewhere as
    well
    Regards,
    Jace.
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: Thomas Kunst <[email protected]>
    Date: Mon, 12 Oct 1998 14:28:55 +0200
    Subject: Re: AfterValueChange event trigged when it shouldn't be...
    Which version of Fort=E9 are you using? We had some strage problems with
    GUI events in Fort=E9 3.0.F.2, which disappeared now that we use 3.0.J.1!=
    Fouche, Jaco wrote:
    =
    Hi there,
    =
    I'm hoping that someone out there has experienced the following (and
    knows why it is happening. ) :-)
    =
    I have a couple of windows on which the AfterValueChange event is
    triggered on a field upon hitting the delete key.
    We all know that this should only happen upon leaving the field, ie. th=e
    field loosing focus. The problem is that I'm trying to recreate this in=
    a simple test class, but now it won't happen. I still have the original=
    windows on which it is happening, but I would like to construct
    something small and simple to send to Forte.
    =
    Any ideas as to why this could be happening?
    =- -- =
    Dr. Thomas Kunst mailto:[email protected]
    sd&m GmbH & Co. KG http://www.sdm.de
    software design & management
    Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
    Tel +49 89 63812-221 Fax -444
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: Greg Gorham <[email protected]>
    Date: Mon, 12 Oct 1998 09:51:07 -0400
    Subject: math library
    I need direction to the source of Forte libs that handle more scientific
    math. Also included is the need for more scientific print formating. I
    understand, second hand, that such material is available from third
    party vendors/sources.
    Thanks
    Greg Gorham
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    End of forte-users-digest V1 #1111
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Greg,
    This is a bit of a long shot, but has anyone experience with integrating
    Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
    to read and update a PI/Open database from within our Forte application,
    and we would be most interested to hear from anyone who has experience in
    doing this.
    We are aware of a set of APIs provided with PI/Open that are written in
    "C". We could wrapper these from within Forte, however the issue is that
    the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
    You could write a dll (on windows) or shared library (on unix) wrappering the
    original,statically linked "C"-Libs. This lib could be used by Forte.
    Tim Hagemann
    Tim Hagemann
    Ascom GmbH Email: [email protected]
    Charlottenburger Allee 61 Phone: +49 241 96806 273
    D-52068 Aachen Fax: +49 241 96806 225
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

  • Excel integration with Entry and Approval for SSM not working

    Iu2019m having trouble getting excel integrated with E&A for being able to enter large number of historic data points into a cube-built model u2013 Iu2019ve gone through all the docs several times and there is no good concrete explanation on how to do this. I keep getting the following error message:
    Error opening Excel Automation server can't create object. This can be caused by:
    1. - The application is not installed on your machine
    2. - The browser security does not support ActiveX scripts.
    3. - Your were prompted to run ActiveX and you said No, if that is the cause close all browser instances and reopen.
    However, I've done the following:
    -          Iu2019ve installed the excel add-in on both the server and my local machine, and Iu2019ve enabled the add-in part in Excel on my local machine.
    -          The browser security is definitely set to accept all active X scripts
    -          I am never prompted to run activeX when I select u201CHistorical Datau201D within entry/approval. I just get the above error message.
    -          Iu2019ve flushed cache and restarted listener several times.
    What am I missing? I donu2019t see it in any of the docs.
    Thanks!

    Robb,
    Looking at what you've done, there doesn't seem to be an obvious answer. The best suggestion I can make is to fill out a support ticket on this. There must be other factors at work here that will require a deeper look.
    Regards,
    Bob

Maybe you are looking for