Cprojects 3.1 and internal ITS

Dear Sirs,
we are usign cprojects 3.1 in conjunction with internal ITS on WAS 6.40. In accounting and other places where there are links to SAP transactions, when clicked, they open a new window with the following url.
host/scripts/wgate/webgui/!?Calling parameter
However on the internal ITS this has changed quite to:
host/sap/bc/gui/sap/its/webgui?Calling parameters
I need to change the calling URL of cprojects in order to get cprojects to work with internal ITS. I have not seen any way to do this in customizing. Any ideas?
In note 668808 cProjects: HTTP error 404 when calling R/3 transaction, there is reference to a error with the ITS calling URL (how to force it to lower case). The corrections is done to METH CL_DPR_OLR3_WORKCREATE_URL_TRANSACTION
My plan is to rewrite this meth to use the new its path, however is this the correct way to do it? Or are there any other way to do it?
Regards,
Jørgen

Hello,
if the SAP server which are running FI/CO (accounting integration) does not have a standalone ITS, and is running WebAS 6.40 or higher, you can activate the ITS. I will not go into how this is done, as a fast search on sdn will provide you a much better answer.
The internal ITS is not a pre-requiste for calling controlling cockpit (or other transactions) from cProjects; the pre-requiste is an ITS server. However, whether this is a standalone or internal one does not make much of a difference.
regards,
Jørgen.

Similar Messages

Internal ITS, IAC and PocketPC Browser

Dear all,
we have some self written IACs running on a PocketPC. After migration to WebAS 7.0 with internal ITS the IACs quit with "Browser version not supported". There is no problem running these IACs in the Browser, they are all classic IACs with just HTML code. No JS and so on. Anybody an idea how to tell WebAs not to throw the exception?
Kind regards
Roman Becker

Hi Roman,
SAP note 972116 deals with that issue.
Thanks and regards,
Dieter

When differences in parameters in SICF and SE80? (internal ITS)

Dear Sirs,
When using the internal ITS it is nessicary to maintain parameters in both SICF and SE80.
In a case where it is a difference between the two, eg. ~theme 99 (SICF) and ~theme 90 (SE80), which will be the controlling one? (which has presedence over the other?)
Is it needed to set all the parameteres in SICF, or is it possible to set a bare minimum (~transaction and ~theme) and then set the rest in SE80. (as SICF can be out of the developers reach).
Best regards,
Jørgen Ruud

Thank you Klaus,
as usual a very good answer. I was under the impression that the parameters had to be maintained both places, which I found a bit strange.
Thanks for clearing this up to me.
Best regards,
Jørgen.

Link between cProjects and Internal Order

Hi all,
i customized well the integration between my cProject 4.5 and CO of R3.
The assignment of an internal order to a project work well.
I need to find this link via abap with a bapi or a method.
Do someone know how it is possible?
Best regards,
Luca

Hello Luca,
Can you give more details, What link are you talking about?
If you are talking about Internal order Object Link:
1. If you have done the cProject - accounting integration well you will find the link in the accounting tab else you should get error messages and resolving them will give you link to the Controlling cockpit.
2. If you are trying to link existing IO's with existing projects you can achieve that by using "Create Object link" in the "Object Links tab".
Hope this helps.
regards
N K

External and internal mikes are not automatically switching over either recording or on voice calls

My laptop model name is HP Pavilion dv4-1100ea which is shipped with Vista Home premium 32 bits and has got service pack 1.
Restored the laptop to factory setting since then I am having the following problems; I had the same problem when my laptop was brand new and whenever I reset the laptop to factory setting I get the following problems:
1. External and internal mikes are not automatically switching over either in middle of the recording using sound recorder or while the call in progress on voice calls (skype):
   Using the sound recorder if I start recording the sound with external mike and in-between recording if I switchover from external mike to inbuilt mike and later on when I play back I can only hear the sound up till where I used the external mike during recording, after the switchover to inbuilt mike I cant hear any sound.
   But if I start the recording with inbuilt mike and in between recording if I plug in the external mike and later on when I play back I can only hear the sound up till where I used the inbuilt mike during recording , after the switchover to external mike I cant hear any sound.
   So in brief both my external and internal mikes are working fine, only problem is that if I start recording (using sound recorder) or voice call with one specific mike, I have to continue with it till the end. I can’t switchover to another mike in between the conversation (voice call) or recording, if I do so, I have to select the mike manually in chat software but while recording I cant even select manually because in laptop, it takes the mike whichever is in current use as default mike in recording tab(sound window). The green tick automatically (in recording device tab) switches over according to the use of mike. Though the green tick in the recording tab is switching over automatically according to use of mikes, its not picking up the sound after switch over during recording.
2. And also when I click on recording device tab in sound window and plug in external mike, though the green tick automatically switchovers from internal to external mike, while I speak both internal and external mikes volume meter respond to the sound inputs by rising and falling but if I take out external mike, green tick goes to internal mike and when I speak only internal mike volume meter respond to sound rising up and down not the external mike.
To resolve the issue I have tried following steps with no luck:
1.I have checked the mikes(internal and external) properties, the both mike shows to be enabled in general tab, in level tab the volume is set to 100 and in advanced tab , all options are selected.
2. In device manager I have got only one audio driver named as “IDT High definition Audio CODEC”. I have uninstalled the audio driver and reinstalled it using scan for hardware option
3. Uninstalled the audio driver in device manager and reinstalled the audio driver using recovery manager > advanced option> hardware driver re-installation.
3. I have updated the BIOS(Insyde F.65, 12/02/2010).
4. I tried to update the audio driver using below link but things went more worse so I did system restore (not factory setting though).
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67051-1&lc=en&dlc=en&cc=us&...

Sounds like you need to upgrade to the iPhone 5s
The 5s has Touch ID
You can unlock your phone with your finger instead of typing in a key code
No swiping to unlock either, just touch the home button
You can enrol multiple fingers as well
Here is a video of it in action
http://www.apple.com/iphone-5s/videos/#video-touch
Or wait and see what iPhone 6 has to offer
That being said, as desiel vdub posted if the phone is up to your face, the proximity sensor should turn the screen off
And when you lower the phone turn it back on again
Not sure about the phone locking when your on a call doesn't sound right

Application Server Session timed out (-11) (lack of debug in internal ITS)

Dear Sirs,
I get the error message below, when I try to run a IAC through internal ITS. The IAC worked for a while (<30 minutes), and then suddenly this error appeared.
I can see that this error message has been asked about previously, but then in connection with statefull/stateless BSP applications (e.g "Session timed out thread", on this forum May 31 2005).
In this thread the solution is apparently to alter the 'rdisp/plugin_auto_logout', is this the case for us as well?
I have read Error handling using the ICM , but not able to actually beeing able to pinpoint the problme.
All our other IAC are working it is only a problem with one of them. The problem is still valid even if I log on with different user, and the error is still there now even after two hours. The problem transaction is a altered version of the WSTA, and I am able to get the first screen where I enter the store number.
Any tips or suggestions to pinpoint the error?
+400 Session timed out - please log in again
Application Server Session timed out (-11)
Error: -11
Version: 6040
Component: ICM
Date/Time: Thu Apr 27 14:13:56 2006
Module: icxxthr_mt.c
Line: 1719
Server: xxXXXt_TXX_XX
Detail: Session does not exist+
In SM21 :
+Transaction Canceled ITS_P 025 ( 0x2103: Interpreter: The input contains errors. )
Documentation for system log message D01 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T200 message and the parameters.
Additional documentation for message ITS_P 025 Template interpretation terminated - internal error &1
No documentation exists for message IT025+
Best regards,
Jørgen

Dear Sirs,
The error has been solved. It was a matter of an illegal input sendt to the RetailHeaderFunction.
However, this makes way for another question.
On the standalone ITS, it was possible to get error messages which indicated where the code contained errors, when it was runned.
How is it possible to make the internal ITS gives better feedback (errors?), and show where the error is?
Jørgen

SAP QUERY LOOPS AND INTERNAL TABLE

Hi All, I have a query which i have made. It runs from Table EKPO which has PO details and what I want to do is now via ABAP Code pull through the total of goods receipt for the PO and Line Item into a field. Sounds Easy enough..Problem now,
The table which contains the GR data is EKBE which agains a PO and Line Item can have many 101 movements and 102 movements so what I want is an ABAP Statent to basically sum up the total of 101 for the PO & LINE ITEMS and then minus this from the total of 102 for the PO & LINE ITEMS and post the result in to this new field I have created.
I am pretty decent with ABAP Code in Querys I.e Select statements etc but from what I can see i need to create an internal table and do a loop and collect statement but I keep on failing due to not enough knowledge. Please can some one help me with this and provide me with the code and explanation as i would like to understand,
POINTS WILL BE REWARDED
Thanks
Kind Regards
Adeel Sarwar

Hi,
This is the full code i have entered but its not working. Any help would be appreciated. If you could rectify the code and internal tables that would be great.
Thanks
TABLES: EKBE.
DATA: PurO LIKE EKPO-EBELN,
      POLI LIKE EKPO-EBELP.
*New Table and Vars defined
DATA:   BEGIN OF IT_EKBE,
          IT_EKBE LIKE EKBE,
        END OF IT_EKBE.
DATA: BEGIN OF IT_SUM OCCURS 0,
          EBELN TYPE EBELN,
          EBELP TYPE EBELP,
          DMBTR TYPE DMBTR,
          MENGE TYPE MENGE,
      END OF IT_SUM.
CLEAR: QTYD.
MOVE: EKPO-EBELN TO PurO,
      EKPO-EBELP TO POLI.
SELECT * FROM EKBE INTO IT_EKBE
    WHERE EBELN = PurO
    AND   EBELP = POLI
    AND   BEWTP = 'E'
LOOP AT IT_EKBE.
MOVE CORRESPOING IT_EKBE TO IT_SUM.
IF IT_EKBE-BWART = '102'.
    IT_SUM-DMBTR = IT_SUM-DMBTR * -1.
    IT_SUM-MENGE = IT_SUM-MENGE * -1.
ENIDF.
COLLECT IT_SUM.
CLEAR IT_SUM.
ENDLOOP.
ENDSELECT.
If sy-subrc = 0.
QTYD = IT_SUM.
ELSE.
QTYD = 0.
ENDIF.

Trying to optimize eSATA and internal disk configurations

I'm trying to optimize the HD setup on my dual 2.5GHz G5 with 4.5GB RAM
major considerations.
- massive itunes library (260GB), and big iphoto lib (25GB) as well
- lots of video editing in Final Cut with large capture files and many video exports
- regular podcasting and other media creation with all my music and photos
- need for regular COMPLETE backups
- speed
Here's the current setup. I have six disks as part of the system
1. internal 160GB disk (maps simply to a MACHD volume)
2. internal 250GB disk (maps simply to a COMMONS volume for Democracy player files, torrent downloads etc)
then on my 4-port eSATA controller card
4x 500GB SATA drives from Western Digital for a total of 2TB eSATA disk space
they are in 2 eSATA enclosures from FirmTek
I'm managing the disks with SoftRAID
Before I get into the problem, how would YOU use this incredible amount of disk space, considering the goals I have? (video, media storage, backup).
Now, The problem
I've been disappointed with the speed of my system and suspect its my HD configuration. I have enough RAM right!?
I've got some raid stripes going on
2 of the 500GB disks (disk2 and disk3) support two "active" volumes
a) a striped ATLAS volume of 800GB (holds itunes, documents, iphoto, basically all media files)
b) a striped VIDEO SCRATCH volumn of 200GB (for working files in FCP, imovie, etc)
the other 2 of the 500GB disks (disk0 and disk1) support two "clone" volumes
a) a mirror MACHDCLONE volume on both disk0 and disk1 (to protect the system drive. I run Super Duper 3x per week)
b) a striped ATLAS_CLONE volume to backup the active ATLAS volume
the COMMONS volume is not backed up in any way. figure i can live without my Democracy files and torrents, etc.
My ideas:
based on my performance observations, my setup above is just wrong, and I don't know where to turn for the best advice. Google is very poor at dealing with such complexity in search results. There are some video advice sites, but they only cover part of my problems. I have a few theories of how I should be using these drives
1. use the eSATA drives strictly for performance benefits, not for backup. consider a USB2.0 drive for backups and use Mozy for offsite backup
2. simplify the disk allocation. No single disk should support more than one volume
3. the video scratch SHOULD be striped in order to benefit from speed. and should be on its own physical disk(s) separate from ANY other function
So I'm thinking
a) stripe two of the eSATAs into a single 1 TB array for my media or ATLAS volume
- this solves me running out of space on the volume (getting closer with the iTunes video downloads every day)
- it's also just physically easier to deal with. I can SEE what drives make up ATLAS alone
- will be easier for me to eventually replace the G5 with an MBP running its own eSATA pc card with easy access to the same ATLAS volume
this still leaves two 500GB eSATA disks around
b1) I could extend the ATLAS volume to an array including a 3rd eSATA disk for a 1.5TB volume. this would allow me to bring COMMONS files onto ATLAS
b2) the remaining 500GB eSATA disk can be video scratch
OR
c1) dedicate 1 500GB disk to VIDEO SCRATCH
and
c2) partition the other 500GB disk as a clone of both COMMONS and the internal System drive
see how CONFUSING THIS IS ?
there are too many permutations of things.
I know I like keeping the system drive simple and internal. Ideally, the second internal disk would mirror this volume, but they do not match in size or brand
part of me wants to stripe all FOUR eSATA drives into a blazing 2TB masterpiece, but it seems like a bad idea to put VIDEO SCRATCH on the same array as ATLAS
Other questions:
should the itunes library get it's own disk altogether? is striping of benefit here?
are there some sites that explain HD management well?
PowerMac G5 2.5GHz 4.5GB RAM Mac OS X (10.4.9) also own a blacbook

Thanks so much for that awesome feedback.
A few points.
I have the dual processor G5, not the quad core. Purchased in Jan 2005.
My RAM pageouts are fine (didn't know what that was until you mentioned it)
Love the idea of moving COMMONS "outside the box"
I used to have my system volume boot from an external RAID, but didn't notice a big improvement, and it meant my G5 would ONLY boot if the eSATAs were powered up. I just didn't like that feel. I want the tower to work in a self-contained fashion, even if I don't have access to all media. I want access to the OS and apps.
I'm unlikely to buy more SATA controllers and enclosers or too many new disks. I'm on a serious budget and want to work with as much of what I have as possible. That said, i just checked out the Drobo and am drooling. I'll wait to see how well it performs for data access (and video) and not just storage.
It sounds dreamy to stripe all four of the eSATAs into a 1.8TB storage megaplex. I imagine they would scream in an ATLAS_BADASS volume, but then I've got nothing left for VIDEO SCRATCH used to capture and render.
The VIDEO_SCRATCH doesn't need to be large, and I think that's where I'm having a conflict. My eSATA drives are way too big to use even ONE as a video scratch, much less striping two of those bad boys just for that purpose
Purchasing a 10K drive for video scratch (or system volume) is not really in the cards yet.
So here's where I sit now:
1. My Media Storage
++ the 4 eSATA drives (2.0TB raw)
I go with the badass steroid injected ATLAS volume striped across all four.
this is my media array and holds all the contents of ATLAS and COMMONS (iTunes, iPhoto, Documents, FCP training videos, ripped DVDs, the works)
2. My System Volume
++ the 250GB internal SATA
move COMMONS out
migrate system volume to this disk
better storage-to-free space ratio
3. My Scratch Disk
a) use the now-spare 160GB internal Maxtor (probably weak and slow)
b) get an external FW800 RAID disk from OWC
http://eshop.macsales.com/shop/firewire/hard-drives/EliteAL/StripedRAID
I'd go with the 160GB or 320GB
4. Backup Plan - level 1 - local
++ use my spare external Maxtor 250GB FW drive
clone the system volume regularly
++ get an external FW drive (like the 1TB My Book Premium II from WD)
clone ATLAS_BADASS regularly
the WD is just $400
i know it's capacity is lower than my super striped RAID, but i don't know of any cheap way to clone ATLAS_BADASS to a 1.5TB drive
5. Backup Plan - level 2 - remote
pay for a Mozy storage account which has unlimited capacity
upload system and ATLAS_BADASS every few weeks
any new thoughts? and thanks again!

ESS with Internal ITS

We are using ESS 50.4 on ECC6 with internal ITS. It is working well except for a mouseover message when the user places the mouse over a pushbutton in the applications for Address, Personal Information, Bank Information, and Family/Related persons.
The mouseover message says 'Pushbutton deactivated' even though the pushbutton has not been deactivated.
Can this be fixed via the portal or through ICF or in SE80?
Thanks for any suggestions,
D. Maupin

Donna,
Those parameters look about right for the WEBGUI service, but not so much for the ESS services you mentioned.
I just had a look at one of the few remaining ITS based ESS services we still use (PZ03 Bank) and the parameters we have set in SE80 and SICF look like this:
~AUTOSCROLL      0
~GENERATEDYNPRO      1
~LANGUAGE
~LISTSCROLLING      0
~LOGIN
~PASSWORD
~POPUPS      1
~STYLE      DHTML
~TRANSACTION     PZ03
~WEBTRANSACTIONTYPE EWT
The mouseover messages seem to work fine for us with those parameters, maybe try setting one of yours the same way and see if that helps.
regards,
John

Internal ITS, ITS_ERRMSG_EXCEPTION SAPMSYST

Dear Sirs,
I am currently facing an issue with an IAC based on the standard WSTA (some modification to the IAC) program by SAP. It runs quite well, but it looks like out of a 500 user sessions I have got three similar short dumps.
The error message is,
Es wurde eine Fehlermeldung von WebAS empfangen. Fur das Grundbild der Fehlermeldung (Program: "SAPMSYST" Dynpro-Nummer: 40) wurde kein Template gefunden, der ITS service musste deshalb abgebroten worden. Beseitingen Sie nach Möglichkeit die FEhlerursache. Erst wenn die Feherursache beseitigt ist und damit die Fehlermeldun von Web nich mer gesendet wird, ist dieser ITS Service wieder lauffähig.
I know the answer generally is to active ~webdynpro 1 (it is currently 0). However as I understand it this will only make the error appear more sensible. I can not understand why it only happens 1/100 times, could it be something to do with scarce resources?.
Does anyone have any input on where to start looking for the error, what is the normal errors concealed by the error.
I am aware of note 859213 Integrated ITS, error messg on transaction selection screen, however if does not give an answer. We are on the recommended stack/patch level.
best regards,
Jørgen

Hello Klaus,
first of all I would like to thank you for the very good answers which you always seem to give.
As for the ~webdynpro it was a typo :=).
The service is migrated from standalone ITS to Internal ITS, and the same a dynpros is covered (same templates, same parameters). Would you think that is probable that this error has been exsisting at the standalone ITS as well, and have just been discovered now. Or is this something which may have been caused by the internal ITS migration.
Our big problem is that since the error is rare, even though if we set ~generatedynpro 1, if the long error appear on the end user side. It is unlikely we will be able to get the long solution? (as the users probably will forget to send it to us).Or will the long solution be available in some central log which we can read.
And just to double check, there are no downsides on setting the ~generatedynpro 1?. If it not, I guess best practice should be to set it on every IAC.
Best regards,
Jørgen Ruud

Internal ITS - service CATW not running

Hello Experts,
I want to migrate from external ITS to the internal on ERP2005. The internal ITS seems to work, at least service webgui looks ok.
What I need most is the CATW (timesheet) service. I have published it in SE80, in SICF I have added several parameters in the Gui-Configuration, now the service starts but what I get is not the "IAC-look" of CATW, but I get the transaction CATW which opens in the webgui. (looks exactly like in the gui when opening transaction CATW.
Any hints and tips for me?
I just want the Cats regular (ITS version) of the timesheet which uses the CATW service templates.
best regards,
JOhannes

Johannes,
Thank you for your quick reply. At first I tried looking for Aliases in SICF, and couldn't see any for sap/public/bc/its/mimes (although I don't know how to find an internal alias sorry) so I created an external alias sap/public/bc/its/mimes to point to default_host/sap/public/bc/icons which in SE80 Mime Repository looks as though it's where s_b_copy.gif is, but that still didn't let CATW find s_b_copy.gif so I went back to SE80, Internet Services, CATW. There I created s_b_copy.gif under CATW > Topic 99 > Mime Objects > ICONS which is where I find other .gif files which work, e.g. DELETELINE.GIF. I then changed template 1000APPCORE so that teh code for s_b_copy.gif looked like the code for magnify.gif which is:
<a href="#" onclick="javascript:OkCode1000('COPYTARGET')"><img src="`mimeURL(~service="CATW", ~theme="99", ~language="", "icons/s_b_copy.gif")`" border=0 alt="`COPYTARGET-TIP`"></a>
I published CATW again, and when I start the service, s_b_copy.gif still doesn't show, but when I look at it's properties it's the same as for magnify.gif which is <server>/sap/public/bc/its/mimes/CATW/99/icons/magnify.gif
I'm obviously misunderstanding something as I thought this would get the icon displayed. Any thoughts what I'm missing please ?
Thanks again,
James.

DATA BASE TABLE AND INTERNAL TABLE

Dear Friends,
please help me out in getting complete information about database table and internal table.
you can email me at < Removed by moderator - please maintain e-mail iDs in Business Card>
Message was edited by:
Arun Varadarajan

Hi Hazi,
DATABASE Tables :
This are the tables which are stored in the database (eg Oracle , informix , DB2 etc..) Physically. u can view it from T-codes SE11 or SE16. here in SE11 u can create ur own Transparent table.
for more information...
http://www.sapbrainsonline.com/TUTORIALS/TECHNICAL/dictionary_tutorial.html
Internal Tables.
While generating reports or other objects we are not modifying the database tables directly first we are selecting the data of the database table into the internal tables... so that we can reduce the database access time and network traffic .. which is highly needed in R/3 system..
internal tables are not exist phyiscally in the system. its like a array. the existance of the internal tables is upto the program execution in which u r declaring nd using it...
for more information..
http://www.sapbrainsonline.com/TUTORIALS/TECHNICAL/internaltables_tutorial.html
Hope it will solve ur problem..
Reward points if useful..
Thanks & Regards
ilesh 24x7

Log file (access.log) of the internal ITS

Hello,
anybody know how to access the logfiles of the internal ITS. In particularly im looking for the log file access.log which you had for the external ITS accessable over the ITS admin page http://<servername>/scripts/wgate/admin/!
The log file loged all users and the transaction they accessed over the time in the format
2006/10/21 18:39:16.093, 0 #197349: IP ???.???.???.???, -its_ping
Thanks in advance,
Kai Mattern

hi
good
go through these links, i hope these ll help you to solve your problem.
http://www.hp.com/hpbooks/prentice/chapters/0130280844.pdf
http://help.sap.com/saphelp_46c/helpdata/en/5d/ca5237943a1e64e10000009b38f8cf/content.htm
thanks
mrutyun^

ESS 50.4 on Internal ITS 6.20 with ECC 6

We are using ESS 50.4 on ECC6 with internal ITS. It is working well except for a mouseover message when the user places the mouse over a pushbutton in the applications for Address, Personal Information, Bank Information, and Family/Related persons.
The mouseover message says 'Pushbutton deactivated' even though the pushbutton has not been deactivated.
Can this be fixed via the portal or through ICF or in SE80?
What development causes a message on a mouseover of a pushbutton when using SAPGUI for HTML?
Is it an ICF variable setting, an ITS CSS issue, a portal issue, or something else.
The ITS parameters are set to:
~singletransaction=1
~webgui=1
~webgui_simple_toolbar=128
~generateddynpro=1
~popups=1
Is there some other parameter that would prevent the mouseover message from appearing?
Also, the web status menu appears when the user right clicks in the screen. How to stop this from appearing?
Thanks for any suggestions,
D. Maupin
University of Kentucky

Hello Donna,
I would like to ask you to have a look at SAP note [1263586|https://service.sap.com/sap/support/notes/1263586] (Quick info on screen button contains text "deactivated"); it has been released a few days ago. It seems that this note is what you are looking for.
Thanks and regards,
Cris

How to use Web Filters methodology with Internal ITS with NW2004s

ITS 6.2 will no longer be supported going forward with the upcoming NW2004s. Only internal ITS will be supported with 2004s. However, since PAS APIs are not available with Internal ITS, Can any one give some clue on how we can use the Web Filters methodology for use with Internal ITS with 2004s.

A long time ago, but yesterday i have had time to try again to setup the MacMini server properly. But no luck.
sudo changeip -checkhostname
gives me:
Primary address          = 192.168.1.** (i don't know it's save enough to put this IP complete on the net)
Current HostName      = server.beeldenstorm.be
The DNS hostname is not available, please repair DNS and re-run this tool.
dirserv:success           = "success"
So their is something wrong. But how to repair the DNS?
MacMini server is working properly on our local network, but outside not. I have done the port forwarding.
Another problem is that i have read that for the server to work properly we have to use fix IP address.
So, that's what i am doing. But in that way their is no internet connection at all.
So, no updates and ... .
Lookup and Ping test, outside our local network:
http://beeldenstorm.be/doc/lookup-and-ping.pdf
Why is this so irritating and are there soo many problems on forums?
I know: because most of us are not network/server specialists.
But Apple sells this server app like a app for everybody, easy to install?
Thanks for help.

Cprojects 3.1 and internal ITS

Similar Messages

Maybe you are looking for