CProjects 3.1: Project phase can be approved without individual approval

Hi Guys,
My requirement is to prevent cProjects phase from being approved if all of the individual approvers have not given their decisions.
I've tried using the customising for phase types to achieve this. Under the setting "Granting of App. with Rejected Individual Approval Allowed" I have specified "Granting not allowed". With this setting, the system will prevent approval if one of the approvers have rejected which is fine. However, if the approvers have not provided their decisions yet, the project manager can still approve the phase.
The following extract from the IMG help says that this setting should prevent approval if individuals have not given their aproval yet, in addition to checking for rejected.
"Under Grant with Rejected Individual Approval whether the approval of a phase can be granted even if all of the approval decision makers have not yet approved the approval. However, even in this case it is necessary that each decision maker has reached a decision."
Appreciate any help on this.
Cheers,
Lashan

I've logged an OSS for this. Will update this thread on the outcome.

Similar Messages

  • Integration of cproject with microsoft project 2003

    dear all,
    i want to integrate cproject with microsoft project 2003.
    can u send me documents related this. what are settings required for this.
    my email id: <b>[email protected]</b>
    thanks
    amit

    Hi Amit,
    Can you share  DOCUMENT  with me
    my mail id [email protected]
    thanks
    sunil

  • Message Column in Individual Approval View of Manager- What data is shown??

    Hello Guru's,
    We have implemented Time Management, and in that Manager can approve the record working times.
    In that we have Individual Approval views and in that table we have Message Column.
    My question is :
    What for we use the Message Column, since in our landscape we don't see any data.
    Please help me what data is showed and why is it not populating in our case.
    Thanks,
    Pramod

    Hi,
    Thanks for the reply.
    But what we observed is that message column in both collective approval and individual approval screen are not working the same way.
    As you said the message column is used for showing the status or warning message.
    But the problem is as said before the message column is in addition.
    To be more clear In record working time when an employee records the time in the Day view in the details he/she have option to give some notes. That notes is shown in Individual view but the message column in Manager individual approval screen is blank
    In the collective approval screen the message column we are using to show the manager whether he/she entered entered more hours than planned hours.
    Any Other inputs are appreciated.
    Thanks,
    Pramod

  • Cprojects and object links to other project phases

    Hi experts,
    Have anyone of you some ideas how to creating a object link to another phase in another project? Are there possibilites for enhancing the the type of objects link via a BAPI or something in cProjects 4.0?
    Thanks, Camilla

    Hi Camella,
    You can try this in IMG activity
    "Make Settings for the Linked SAP Objects". But you need to try copy an existing entry and change relevant tables parameters
    I have done this for R/3 Transaction in cProjects 4.0 + ECC 6.0 and Iam sure it will work for Project Phase also
    Pls,let me know the version you are trying this feature
    regards,
    Ramakrishna

  • DFM Setup - Project Phase to Item Decision Point

    Hi Folks,
    I am trying to setup a one way status sync from Project Phase to Item DP (i.e. status is only managed in cProjects and should sync to Item DP).
    I have done the following config.
    1. Defined Portfolio Item Types and mapped Item DP to Template Phases
    2. Maintained Phase to DFM business transaction in IMG Map Project / Initiative Business Transaction to DFM Business Transaction
    3. Maintained DFM to Item DP mapping in IMG Map DFM Business Transaction to Portfolio Management Status
    4. Under IMG Map Business Transactions for Synchronization I added a couple additional business transactions that I needed for Source PPCP and Target PPODP.
    Examples entries of the above config for are as follows. This is to change the mapped DP status to 'For Approval' when clicking "Begin Approval" in cProjects phase
    Map Project / Initiative Business Transaction to DFM Business Transaction
    Source Grouping - PPCP Project Phase
    Target Grouping - PPODP Portfolio Item Decision Point
    Source Bus Transacction - DX11 Begin Approval of Phase
    DFM Bus Transaction - IX05 Set 'To Be Approved'
    Map DFM Business Transaction to Portfolio Management Status
    Target Grouping - PPODP Portfolio Item Decision Point
    Source Grouping - PPCP  Phase (Project Management)
    DFM Bus Transaction - IX05 Set 'To Be Approved'
    Portf Mgmt Status - Z0006 For Approval (custom status that I created for Item DP)
    With the above config when I begin the approval in cProjects, the mapped item DP is not updated. I have ensure that the next status of the DP is configured accordingly.
    Appreciate any ideas on how to get this working.
    Thanks,
    Lashan

    It looks like the issue is because when "beginning approval" cProjects status is "For Approval - Released",which means 2 status are active and the DFM business transaction does not trigger.
    Wondering if anybody has the issue where cProjects has 2 active status and the subsequent statuses does not trigger DFM transaction.
    Appreciate any help.
    Thanks

  • Tools for UCCE/CVP Project phase?

    Hi, there are plenty of customer phasing/ post project wallboards, reporting tools, admin tools out there.
    My compnay is looking into some UCCE/CVP Project phase tools which can help the engineers in deisgn, deploy, call flow dev, testing etc phase of a project.
    Any ideas/ suggestions please?
    Thanks & Regards,
    Kartik Bhatia

    For detail on Studio query and response times, you can enable performance metrics/logging.  See Monitoring the Performance of Queries : Configuring the amount of metrics data to record [1] for details.
    [1] http://docs.oracle.com/cd/E37502_01/studio.300/studio_admin/toc.htm#Configuring%20the%20amount%20of%20metrics%20data%20to%20record

  • HI Gurus ..regrding the Architecture & Project phases of Oracle Application

    Hi Gurus
    iam new to the oracle application............
    pls can give the brief explanation about the Architecture & Project Phases-- Methodolgy
    regds
    Pandu Ranga

    You can put up query in "EBS General Discussion Forum":
    General EBS Discussion
    --Mukul                                                                                                                                                                                                                                                   

  • Transferring the data from cProject to PS Project

    Hi,
         When we create a PS project from cProject some of the field values are not flowing.
    1. PS Project is not taking any  cProject Project type.  Is there any BAdI or Configuration Option available to change this behaviour?
    2. Person Responsible of the Project is not replicated in PS Project from cProject. Can We flow this detail from cProject to PS project?
    pls help me to solve these behaviours.
                             Thanking you
    regards,
    Ramesh Nachimuthu

    HI Ramesh,
    Both are unfortuenately not possible.
    1. PS Project is not taking any cProject Project type. Is there any BAdI or Configuration Option available to change this behaviour?
    >> the PS project type is determined by project profile. And PS Project profiel is determined by customizing, tocde  IAOM0, Business Scenario 'CPROJECTS'. In other words, only a PS project type is available.
    2. Person Responsible of the Project is not replicated in PS Project from cProject. Can We flow this detail from cProject to PS project?
    >> The reponsible of cProject is a BP, and the PS Project responsible is a person maintained in HR. They can have no relationship between them, though the name is the same. The corresponding information is not tranfered to the PS and there is no mapping logic applied so far.
    Kind regards,
    Zhenbo

  • CProjects 4.0 - Project ID Generation

    Hi All,
    The number ranges could be used in cprojects 3.1 to automate the project/ object ids using IF_EX_DPR_ATTRIBUTES~SET_DEFAULTS_UPON_CREATION.
    Does anyone know how the project id can be generated using number ranges in 4.0 ?
    Also, how this field can be set to display only.
    best regds
    V

    Hi,
    In order to change the behaviour of a particular field on cProjects screen, use <b>Field Control</b> cncept of cProject 4.0
    Make sure you donot make any changes in the standard SAP settings that are given. Copy the standard setting to make modifications to it.
    Refer SAP Note:<b> 947936</b>
    You will find it at http://service.sap.com/notes
    Regards,
    Reema.
    <i>
    Pl award appropriate points if useful.</i>

  • Bw project phase for certification

    Hi guys,
    I had previously found links on the following topic for certificatoin but couldnt find it today.
    Can somebody just send me the link for
    Unit 6: Experience from implementation
    :Procedure for project
    :Project organization
    :Project phases
    :Requirement analysis
    The thread where each phases has been explained in detail
    It's urgent
    Message was edited by:
            zsl05

    hello ,
              Kindly check this thread,
    BW Certification
    BW 3.5 Certification
    hope this helps,

  • I have few muse projects how can I  integrate them in an another muse website which I have just created?

    i have few muse projects how can I  integrate them in an another muse website which I have just created? How can I make link between  HTML document inside muse. The Html document   (saved on my desktop )is another web project  done with css3 and Html but for my portfolio I need to create an HTML link  so the project can be viewed by others.

    Perhaps with iFrame Builder Lite | Exchange | Adobe Muse CC ?

  • How can i get option to approve or reject an emial in outlook in mac such that once i click on approve, the email is sent and if i click on reject it goes to sender (within our workgroup), i used to have it in windows

    how can i get option to approve or reject an emial in outlook in mac such that once i click on approve, the email is sent and if i click on reject it goes to sender (within our workgroup), i used to have it in windows

    Better ask on the Microsoft forums where the Office experts hang out as it's Microsofts product you're have questions about
    http://answers.microsoft.com/en-us/mac

  • Project Manager can´t see my .lso files

    Hello logicusers, I am new at the forum and this is my first trouble: Project Manager can´t see my .lso files. I would like to start using PM but it seems to be difficult without seeing .lso files in the navigator window.
    I´ve read the books, I´ve checked here for this tip and got a lot of useful information, but no solution found. I hope somebody could help me please:
    - Macbook white with LP 7.2.3
    - Reinstalled and cleaned all
    - Installed OSX upgrade 0.4.9 manually
    - Installed pro application support 3.1
    - PM Data and logic preferences deleted
    - permissions applied to "all enclosed folders"
    - Performed a complete scan in PM
    If I create a new song from logic, PM can´t see this .lso file.
    If I scan a external hard drive (lacie f.a.porsche) through PM, it only recognizes one .lso file from a lot of old songs, and I don´t imagine why.
    Yesterday I tried this: opened PM, copied a Template song from the Templates folder to the Desktop; renamed it as "Sidload" (my particular "Autoload" term); until here, everything correct, PM seems to be able to manage "Sidload". But when I open Sidload and save the first change, and .bak folder comes, I can´t make more "visible copies for PM" of this file. Finder can see the new copies, but PM not (files that has created "itself"); so I can´t manage a song that has been copied, renamed and saved for first time -through PM, from a Template; invisible, dissapears. No saving PM data, no checking folder, no advanced search helps.
    I wish to have a way to talk to logic support via mail, but I don´t know how. So I came here to beg you friends for your help. Thank you very much for being here.

    yep, I have scanned at every level, from everything to just a single folder that contains song files. After scanning a folder that conatins songs on my SATA B drive (the one that PM can't find songs), still the songs will not appear.
    I have copied over my songs to the drive that PM seems to see songs on and guess what? It doesn't see those songs copied over.
    This is driving me so nuts I have forgotten that I engaged in this thread...
    http://discussions.apple.com/thread.jspa?threadID=1046126&tstart=0
    Does anyone know what the option in the PM's file menu "import file maps" and delete all exported file maps" does? Or what its for?
    It feels to me that some sort of database or referrence list etc etc has gone very wrong, but I have already tried deleting (manually) the PM data file in somewhere in the library folder etc etc.
    Using file buddy I see that PM stores the a PM database as an invisable file on each drive you have connected. Presumably info for what is on that drive. Perhaps these invisable files need to be manually deleted???
    Message was edited by Thomas O'Carroll because this forum doesn't work properly

  • Before Mountain Lion and Aperture 3.4 Iphoto libraries would show up as a project.  Can I still have this feature?

    Before Mountain Lion and Aperture 3.4 Iphoto libraries would show up as a project.  Can I still have this feature?  I want to keep my iphoto libraries on another drive but now it appears the only way I can have Aperture search all libraries for a photo is to merge the aperture library with all the iphoto libraries. In the past the photos were referenced photos in their orginal libraries but now we are creating one big aperture library.  Does this make sense?  I liked the old way were the iphoto libraries showed up in the left window as a project.  Does anyone know of a work around?

    Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
    (On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
    (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    What's the plist file?
    For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

  • How can i customize portal's Approval Detail Page?

    Hi there,
    I wonder how can i customize the portal Approval Detail Page? I got to know tat the package script is wrapped and cannot be unwrapped. So I am thinking to add smth like a link in the page for the mailto function. I was asked to send an email notification to the top management whenever there's smth new added approved.
    where can i locate the page? or... where's the script to generate the page? Can someone suggest me?
    thank you for your patient wit my question..

    In SP3 you can get a DesktopBackingContext, from which you can get the desktop's definitionLabel or title. Perhaps that will work for you?

Maybe you are looking for