CProjects 4.0 - CATS scenario: Details of confirmed hours in cProjects

Hi Experts,
Do you know how can I see the details of the confirmed hours in cProjects (I mean, depending on the cProjects task)? I would like to know for a certain amount of hours that appear as confirmed, who has posted them, when, and to which WBS element.
Thanks in advance.
Best regards,
Neil

Hi Neil,
It is very interesting question. The two tables mentioned by Vivek should be the right tables to get such information. But I still not 100 percent sure, if the link between two tables are the CATSDB~COUNTER <->
DPR_CONF_LI~CPR_CABA_BELNR.
The table CATSDB is in the ERP system, where you entry the hours via cats. And some inforamtion will be transfered to cProject system into DB table DPR_CONF_LI.
It may be sufficient to use the CATSDB solely.
Kind regards,
Zhenbo

Similar Messages

Where PI Configuration Scenario details are stored under ABAP stack Tables?

HI Experts,
I want to know ABAP table name where the PI Configuaration Scenario details are stored.
I want to display the list of all the Configuration Senarios created for different senarios under PI system.
please let me know the table name or any other process.
Thak you.
Regards ,
Nary

I am not sure why you need this.
If it is one time activity, log in to ID. Go to configuration scenario. Select All and paste in Excel.
You will get list of configuration scenarios.
But if you need in any program, I am not sure if there is any table which stores configuration scenario name. You will get many tables having BS, Comm Channel, Interface, Namespace, etc. but I doubt abt Scenario.
We will also see replies from other's if they know any table.
Regards,
Gouri

Table for viewing SHC details and Confirmation details

Hi All,
I would like to ask in which table can i get SHC details in SRM (SHC Num, Company Code, Business Area, Created By)
I would also like to get same details for Confirmations in SRM.
Thanks!

Hi,
Go to T.code: BBP_PD
Enter the object type : BUS 2121 for shopping cart
and execute and click on the shopping cart no
You can see all the tables for the shopping cart no.
For Confirmation check :BBP_PDCON this is also appearing in the above t.code
Please check and reply
Regards
Ganesh Kumar .G

CM01 - How to see actual confirmed hours?

Hi there,
This relates to capacity planning for normal Production Orders.
I am able to use CM01 transaction to see planned labour hours (calculated from routing). However the report doesn't seem to show confirmed hours, or remaining hours (planned minus confirmed). This seems strange since it's a capacity report shouldn't we be able to see actual capacity too?
I know I can use COOIS to see confirmed quantity, but then it doesn't show Planned Orders which we also want..
Thank you!

Hi sfsm97,
I think what you are looking for can be found in a report called "Capacity Evaluation"
Go to Transaction code CM50 and give work center details.
you will get details like Rem.cap.reqs Avail.capacity Rem. avail. capacity
and as fat as your second question is concerned regarding details of planned orders.
Planned orders do not generate capacity requirement. So you will not get any details of that sort regarding planned orders.
I hope this helps you. Let us know if you need additional details.
Regards,
Abhay Kapase

I received an email from "Apple Customer Care" to resubmit all my billing details within 24 hours. Is this a legitimate request?

I received an email from "Apple Customer Care" to resubmit all my billing details within 24 hours. Is this a legitimate request?

No. Definitely not. Report the mail to Apple ... [email protected]
... then delete it.

Scheduling scenarios for every half hour in ODI 11g

Hi,
I am using ODI 11g.
My requirement is to execute a scenario after every half hour.
I can just see that scenarios can be scheduled on hourly basis only.
Please guide me how can i schedule scenarios on half hourly basis also.
Thanks,
Divya

Hi Divya,
Open your scheduling and go to Execution Cycle tab and Under Repetition select "Many Times", then set "Interval Between Repetitions " as 30 minutes or so.
Thanks,
Guru

Multiple Resources for one role CATS scenario

Hi
We are on cPro 4.5 sp 006
the scenario is
One Role (say Consultant): Multiple Resources (say Niranjan, Amit) at a time (using Edit in parallel)
We have Time confirmation against Role
We have activated Confirmations against Project header as well
now when i try to enter time in CAT2 for Niranjan (who is staffed first) i get all attributes like Project, Project subobject, WBS element etc.
for Amit however I get project and WBS header and I get Subobject as Object does not have a de
It allows Amit to save data but when i try to transfer data to cProjects using Report the program throws error.
Thus for single resource staffing it works not for multiple staffed resources
Any inputs on this.
Niranjan

Raised to SAP
Note: 0001344595

IDoc - Segment details for Confirmation Code in ME22N

Hi Friends,
I am doing Purchase Order Acknowledgement(855) - Inbound Scenario. I need the ConfirmationCode and Confirmation ControlKey fields in the segement of basic type ORDERS05. We couldnt find these two fields in the segments, can any one help me to find out the solution.
Regards.
Selva

Hi Selva,
add these 2 fields and create a segment in WE31. Add this segment to extension idoc in WE30.
Link the Ext.idoc to msgtype in WE82.
Try to fill the data at userexit level for added fields.
Thanks
Eswar

IDoc - Segment Details for Confirmation Code

Hi Friends,
I am doing Purchase Order Acknowledgement(855) - Inbound Scenario. I need the ConfirmationCode and Confirmation ControlKey fields in the segement of basic type ORDERS05. We couldnt find these two fields in the segments, can any one help me to find out the solution.
Regards.
Selva.

Hi Selva,
add these 2 fields and create a segment in WE31. Add this segment to extension idoc in WE30.
Link the Ext.idoc to msgtype in WE82.
Try to fill the data at userexit level for added fields.
Thanks
Eswar

HTTP-JDBC sync scenario - detailed error message

Hi all,
We have a sync HTTP-JDBC (DB2) scenario.
The sender is expecting a meaningful error message.
HTTP is on ABAP and JDBC is on the Java engine.
So how can I get the error message on the JDBC adapter to be passed to the user.
Say I would like to pass the sql-codes that I find at the Communication Channel monitoring for the comm Channel.
reg

Hi,
One suggestion is to configure alerts at adapter engine level..
to get the error messages to concerned user.
Regards,
Sreenivas.

VMI scenario: purchase order confirmation send to vendor

Hello Dear Sappers,
I'm using message type ORDRSP (Idoc ORDERS05) for inbound idoc for Vendor Managed Inventory, and it works. Then, once the PO is created in our SAP, the system automatically send a PO confimattion message to our vendor through message variant VMI in the partner profile for the EDI message category ORDCHG.
The system, once the PO is created, send an automatically ORDCHG Idoc to the vendor. The problem is that the system send the PO confirmation before the PO is release/aproved. That is a problem. My requeriment is to send the PO confirmation Idoc to the vendor after the PO is release.
This is my configuration:
Partner profile:
When a message of the ORDRSP type is processed, a purchase order is created for the vendor who sent the purchase order confirmation.
When a message of the ORDRSP type is processed, a purchase order is created for the vendor who sent the purchase order confirmation.
Partner no.          VENDOR_AG
Description:          VENDOR AG
Partner Type:     LI
Message Type:     ORDRSP
Message Code:     VMI
Process Code:     ORDV
Processing:          Trigger immediately
Send Purchase Order confirmation number to VENDOR AG:
Partner no.          VENDOR_AG
Description:          VENDOR AG
Partner Type:     LI
Partner Function     VN
Message Type:     ORDCHG
Idoc Type:          ORDERS05
Message Code:     VMI
Receiver Port:     CI.SPARES
Pack Size:          1
Output Mode:     Transfer Idoc immediately
Message Control     Application: EF; Message type ZPOC; Process code ME11 and Change message indicator set.
I created the Output Type ZPOC but when I tried to added manually to the PO "Maintain outgoing EDI-connection data for partner VENDOR_AG.
However the strange thing is that the system send the PO confimation IDoc ORDCHG anyway (without any Output Type). But send the Idoc inmediatly the PO is created (not yet release).
My question here is: how can I only send to the vendor the IDoc ORDCHG only when the PO is release?
Thanks a lot to all
Fred

Hi,
This problem was solved. I had to remove the message variant VMI from the partner profile. Keep the message type ORDCHG but without VMI variant. And with that way, the system do not send the Idoc after the PO is created. SAP send the Idoc after the PO is release and do it by Output Type determination.
The key was to remove the message variant! Unbelievable!
Thanks to all.
Fred.-

Cats edit details in the weekly view

I have one dynamic ALV the context as well as Ui elements all are created dynamically
In one of the colum fields I have edit Icon .
that edit Icon appears only when the side by column contains any data.
Now I have several doubts on this .
1. Where its mentioned about the Icon
2. How to change the Icon depending upon certain conditions.

1. Is this icon appearing in separate column ? it could be Link to action UI element and it is image property is binded to it.
You can see thin in ALV_configuration. You might have a method like configure-alv or init-alv like that. Check that out.
2. You can change the image by supplying another image source to the property. My guess is that now image-source property of an ui element (image,Linktoaction..etc) is binded to a context attribute of type string.
Based on your condition supply set new values to the context attribute.

Creative Cloud won't recognise my updated payment details after 24 hours. DESPERATELY NEED HELP

I try to open Premiere although it closes and opens the application manager instead, insisting me to update payment details to reactivate my expired plan. SO i did this , and have now done it four times. Every time it charges $1 to my credit card, although after 24 hours from each time it still does not work. Can anyone help me?

You can try with below steps
If you still face same issue , you need to contact Adobe Support and confirm whether the subscription is active or not .
1) Right click on the Finder icon on dock and select "Go-To Folder" option.
2) You will get a text box, type-in below mentioned command and then hit 'Return' key.
/etc
3) It will open the etc folder, please look for file named "hosts" and copy the same to Desktop screen.it
4)Double click on Hosts file , it will open it with TextEdit, If present Delete Adobe entries present inside Hosts file like 127.0.0.1 activate.adobe.com.......etc
5)Copy and paste the Hosts file back to "Etc" folder.
When asked to Authenticate , enter your Mac Password.
Make sure to select "Replace" option when prompted.
Then launch Premiere pro cc and check.
Note: If the hosts file does not have Adobe entries , you can try below steps:
1) Right click on Finder icon and select "Go-To" Folder option.
2) You will get a text box, type-in below command and then hit 'Return' key.( Do not miss ~ symbol)
~/library
3)Then navigate to Application Support>Adobe>OOBE. Open OOBE folder and delete opm.db file.
Once you had deleted opm.db file , launch Creative Cloud desktop application and sign in with valid email ID.
Then launch Premiere pro cc and check.

Billing confirmed hours by Vendor. Without MIRO

Hi Gurus,
I've been reading a lot about the DIP profile and Third-party Order processing but I'm not able to find a solution for my customer's requirement:
My Customer sells maintenance services but it does not produce them. So, it needs to bill the customer taking into consideration the hours confirmed by the Vendor.
My requirements are:
- Bill the customer based on hours confirmed by the vendor with IW41.
- Generate invoice to customer without MIRO
Can I transfer hours confirmed with IW41 to my Sales order and finally to my customer's invoice?
Please throw some light upon this issue.
Thank you,
Héctor

hi madhu,
please check whether NEGATIVE STOCK is activated for that PLANT.
hope this clears your issue
balajia

Info required on Time details like Regular Hours, Overtime

Hi Guys,
Can anyone give me the details about how to identify the number of regular hours worked,overtime details of an employee over a period of time?
Regards,
Nithya.

Hi,
You need to get regular working hours from IT0007.
For overtime, goto IT2005.
Absences are there in IT2001 which should be deducted from regular working hours.
Regards,
Dilek

CProjects 4.0 - CATS scenario: Details of confirmed hours in cProjects

Similar Messages

Maybe you are looking for