CProjects 4.5: Show old versions of approvals

Hello Experts,
is it possible to display the old versions of an approval document from cProjects. We use the standard implementation of the approval process and form DPR_APPROVAL_HIER.
The problem is, in cProjects i can only see the actual version of the approval document. We want have the possibility to compare the actual version with the last version of the approval document.
I didn't find any note or forum thred to this problem.
Thanks in advance.
Regards
Christian

Thank you for the link to the old versions! It's great!
The version link did show me how the program was updated but does not tell me at what point system 10.1.5 is no longer supported. Is there another way to find this out before I start downloading (I'm on dial-up you see... yep, one day I will get modern technology, but only once i can afford it!)
Thanks again!

Similar Messages

Content presenter to show old version of a document.

We are using content presenter to show content from UCM. In one case we want to show old version of document. We want to pass document-name and rev-label to content presenter and would like to show that particular version only.
Content presenter take datasource as parameter but I believe I can only pass doc-name to it and it will always show latest document. Is it correct?
I am fine if someone can provide cmis query to retrieve one particular version.
Thanks
Sanjeev.

I was also thinking on similar line but problem is ora:t:IDC:GlobalProfile returns only latest versions.
Let say my doc-name is HC_AP_HELP_DOC, I put following query
SELECT * FROM ora:t:IDC:GlobalProfile WHERE ora:p:dDocName = 'HC_AP_HELP_DOC' ;
It correctly show the latest version. If I put additional condition of revision-no as 'SELECT * FROM ora:t:IDC:GlobalProfile WHERE ora:p:dDocName = 'HC_AP_HELP_DOC' and ora:p:dRevLabel = '3'', it workds only for revision 3, because that is the latest one. If I change version no to 1 or 2, it does not show anything. I believe its all because version 1 and 2 are not selected by ora:t:IDC:GlobalProfile so additional filter can not do anything.
Do we have any select query which can return all versions of document?
Thanks
Sanjeev

Downloaded latest VLC Web Plugin ver but Firefox still show old version

Downloaded VLC Web Plugin Version 2.0.5.0 and rebooted and restarted Firefox.
Firefox Plug Ins still shows old version 2.0.2.0.
When I check Firefox for latest version is says 2.0.2.0 is the latest and I'm up to date.
When I open VLC as a standalone it comes up as version 2.0.5.0.
Why is Firefox not incorporating the correct version?

Try to delete the pluginreg.dat file in the Firefox Profile Folder and maybe addons.sqlite as well to reset the plugin registry databases.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder

Dreamweaver 2014.1 Live view is showing old version of file

I'm running Window 7 (64-bit) and upgraded from Dreamweaver CC 2014 to 2014.1 a couple days ago. Since I'm using fluid grid design view is not available, so when I view my files in Live view Dreamweaver (DW) is showing very old versions when I edit some files (not all). When I use split view the code is correct, but it doesn't correspond at all to what I'm seeing in Live View. The code window shows the current version of the file and the live view window shows an old version. Any idea? Also, live view in this new version seems to be extremely slow.
Another question is, how can I re-install the old version (CC 2014)? I tried to uninstall and re-install, but the install automatically installs 2014.1 and doesn't give an option. Thus far, I am very unhappy with what I've seen so far in 2014.1 and would really like to back off 2014 to speed things up.
Thanks much

Hi Preran.
I seam to have the same problem on a Mac. Also Live view keeps crashing and linked to Adobe BC.
If the live view crashes then the live view is showing an older version on the CSS file until I do a refresh. Its been driving me Nuts!
Also the CSS file is no longer automatically uploading to Adobe CC...
So I really could do with a solution for me to run on CC 2014.0 Please.
I am a subscriber to CC.
Cheers Jake

CF7 showing old versions of pages

I have seen a strange problem several times over the last
year or so - the page being shown on the site is suddenly not the
correct version, but an old version from more than a year ago.
The home page
http://www.stavangertravel.com/index.cfm
changes at least 40 times a year, with new events and news items.
Today it is showing a version of the page from early September
2006, even though the files on the server are from 24 October 2007.
This has happened several times, and I noticed last time that
the Recycle bin contained a number of old files - from September
2006 - including 2 ofthe pages I knew I was having problems with. I
emptied the recycle bin, restarted the CF Application service and
everything was fine - until now.
The problem can be cleared by either uploading the files
again, or just by restarting the CF App service.
The big problem is that I have over 1000 pages on this site,
and only by luck will I know when I have a problem.
Any ideas?
Anyone else seen such strange behavior?
I will upload a new version of the page soon.
This last happened at halloween, which seemed appropriate,
but now the joke is wearing thin
John

Well, it happened again - the home page and one of the other
problem pages were back to September 2006 just now.
I have now uploaded the correct versions again.
Perhaps I should make clear - the version I upload is exactly
the same as the one already on the server (i.e. the correct one).
It is a way to make the system start showing the correct page
again.
The other way to do this is to restart the CF App service,
which I don't want to do, if possible.
The problem is not that the files are being overwritten, it
is that the pages being shown by the coldfusion application server
are (sometimes) the wrong ones.
I think the answer to this problem lies in understanding exactly
how Coldfusion MX7 takes pre-compiled files in the web folders and
uses them to display pages. How are they cached? Maybe someone from
Adobe might like to comment?
One other thing I will try is uploading a file that is not
precompiled, just in case that will help narrow it down.
This is not an unimportant abstract issue - the home page now
has prominent links to a ski guide that were not there in September
2006 - it is hurting the business

Updated agent show old version

Hi,
I have just updated DPM from 2012 to 2012 R2. everything went well and i have patched it it the latest rollup 4.2.1235.
I updated the agents ok, but I have a few workgroup machines. I updated the agent on the workgroup server and they are showing the correct version from the protected server, but DPM still says it is the old version 4.1. have refreshed the console and restarted
the DPM and protected server but it did not help.
any ideas?
sg

Try to rejoin the Agents to DPM
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Download complete binery file executed but still showing old version of start page

I have been having this problem for a while, I update with the newer version of Mozilla firefox, 9.0.1 executable file, download the file, execute the binery file, run the update, when all is complete firefox asks to open the start page and the old firefox start page is still showing telling me that my version is no longer supported by google

If you have install 9.0.1 version, you have useragent problem, because your useragent tell us that you have 3.5.5 version (Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.1.5) Gecko/20091102 Firefox/'''3.5.5''' ).
check the version in '''Help''' then '''About firefox''', if you have 9.0.1 see how to fix user agent: in [https://support.mozilla.org/en-US/kb/Websites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser Websites or add-ons incorrectly report incompatible browser ] find '''Reset your user agent''' and follow the steps.
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Still shows old version after installation of new one

HI
I upgraded jdk 1.4 to jdk 1.6.But whenever i used cmd like java - version it is showing same old one as jdk 1.4 can anyone is help me out in this case.
thanks
sachin

I think this is wrong forum for this question, because this forum is N1SM related !!!
anyways ... JAVA_HOME and PATH variables can help ;)
do:
$ echo $PATH
$ echo $JAVA_HOME
they should point out to which java version shall be used
for N1SM ... I recommend to stick to JDK installed with N1SM, unless you know what you're doing ...
also latest JDK patches BREAK N1SM, since they remove symlink to old JDK, so cacao loaders become broken ... simply creating the symlink again workarounds this problem

WSUS Server has hotfixes installed to upgrade Update Services and it's still showing old version

I have a Windows 2008 R2 WSUS server and when I go to help and About Update Service it is showing Version 3.2.7600.226. I have installed KB2720211 Version 3.2.7600.251 and KB2734608 Version 3.2.7600.256, they both show up under Installed Updates.
Is there somewhere else that would show a different Version number or am I missing something?
Thanks

Am 27.03.2015 schrieb ingy0309:
I have a Windows 2008 R2 WSUS server and when I go to help and About Update Service it is showing Version 3.2.7600.226. I have installed KB2720211 Version 3.2.7600.251 and KB2734608 Version 3.2.7600.256, they both show up under Installed Updates.
Is there somewhere else that would show a different Version number or am I missing something?
In Help Menu you have the wrong informations. Pls look at this Image:
http://www.wsus.de/images/wsus-version.png
Maybe you have to install more Updates for coming up to Version .274:
WSUS 3.0 (SP2):    Build 3.2.7600.226
WSUS 3.0 (SP2) + KB2720211:    Build 3.2.7600.251
WSUS 3.0 (SP2) + KB2734608:    Build 3.2.7600.256
WSUS 3.0 (SP2) + KB2828185:    Build 3.2.7600.262
WSUS 3.0 (SP2) + KB2938066:    Build 3.2.7600.274
Servus
Winfried
Gruppenrichtlinien
HowTos zum WSUS Package Publisher
WSUS Package Publisher
HowTos zum Local Update Publisher
NNTP-Bridge für MS-Foren

Lockdown CF10 says update JVM, but admin info still shows old version: how do I sync it?

The lockdown guide for CF10 says to update JVM. After doing that on the machine, the CF administrator information still shows the older CF10 installation version. How do I sync the machine installation with CF10? Do I need a second installation in the ColdFusion10/jre folder?

First, you will need to get ColdFusion pointing back to the original JVM. Open the jvm.config file found at C:\ColdFusion10\cfusion\bin using a text editor. Near the top of the file, look for the line that starts with "java.home=". Change the path to "C:\\ColdFusion10\\jre" (don't use quotation marks around the path). Save and close the file. Now try starting ColdFusion.
Second, you can't use the Java JRE that comes in the standard Java consumer download. You need to download the Java SE Development Kit (JDK), which contains the JRE and some server components that ColdFusion needs. You can get the JDK here: http://www.oracle.com/technetwork/java/javase/downloads/jdk7-downloads-1880260.html. Download and install the appropriate JDK for your operating system. You should now have both a "jre7" and a "jdk1.7.0_XX" folder inside of "C:\Program Files (x86)\Java". Now follow Peter's suggestion on updating the JVM setting in CF Administrator.
-Carl V.

I updated my printer driver but System Profiler still shows old version.

How can I force os x to use newest driver? My Brother hl2220 came with a driver version 3.1.3, but they showed an upgrade to 3.1.3b. I downloaded it and installed it, but System Profiler still shows 3.1.3 in use.

So you are saying the original DIMMs are there plus the ones you added, all were recognized before the repair but only the Apple-supplied after the repair.
Just trying to keep all of this straight in my mind.
In that case, you might try removing the DIMMs you installed and reinstalling, one at a time and see if they are recognized. If they are not, then they may have gone bad for some reason, who knows why, and it is time to look at the warranty you have from the people from whom you purchased the DIMMs.
If it was someone like Crucial or OWC (macsales) they are really good about their lifetime warranty.
If the warranty is lifetime, contact the supplier and see what the process is for replacement.
It is strange that both would work, and then fail. But stranger things have happened with computers.

Update doesn't work. Tried several times but still shows old version of Mozilla and of adobe Acrobat..

I have version 3.6.7 and History shows it has not been updated in two years. (I was using IE for a while but switched back to Mozilla a couple of weeks ago, but I can't get it to Update. It shows that the update has downloaded but it doesn't get activated. I also downloaded Adobe Acrobat update from the Mozilla plug-in page and that also did not seem to "take". What can I do?

Try the following:
Update Firefox by going to [http://www.getfirefox.com www.getfirefox.com]. Download the newer version of Firefox, and install it over your current Firefox install.
Then, read [[Websites say that Firefox is outdated or incompatible even though it's the latest version]], follow all directions there.
after doing that, download Flash 11.4 from [http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe] and install it (close firefox first)

TS3276 I have an old version, 10.5. A few days ago, my Inbox stopped showing new messages received, although they are coming in and show under Messages on Server. How can I get the messages on the server to go to my Inbox so I can access them?

I have an old version, 10.5. A few days ago, my Inbox stopped showing new messages received, although they are coming in and show under Messages on Server. How can I get the messages on the server to go to my Inbox so I can access them?

Make sure Mail is selected in System Preferences > iCloud

When i bought the owner unlock icloud id already, and than i signed in my account in icloud, but whne i updated new version, it still show old icloud id.

when i bought the owner unlock icloud id already, and than i signed in my account in icloud, but whne i updated new version, it still show old icloud id.

Welcome to the Apple community.
Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.

My website is showing an old version - not so on friends computer

Hi,
My website (www.flickchicks.com.au) is showing an old version (22 Feb) and my friend said it is showing up onhis computer as the latest version of 19th April.
I've tried emptying the Cache, cleared the history and did the reset of Safari and it is still the same. There are two networked computers and I did the same to both of them.
I also run the content management system and it is also showing the old version without some vital Title and Description editing boxes which were added recently. So, I can't update anything at the moment.
Hope someone can help. Cheers!

The problem was it was pinting to my previous DNS server (I changed hosting companies a month ago)
I can see how that could happen.
To clarify the terms, though: From what I understand from your post, you were uploading the updated web site pages to your new hosting server (not DNS server - that's a different animal). The DNS servers that your ISP (or router or computer settings) specify were pointing to your old web hosting server and so you were seeing the old site.
Hosting servers contain web site files and serve them to the web.
DNS servers point your web browser to those web sites by resolving their domain names with the physical addresses of the hosting servers.
That can certainly happen. What a pain from your point of view! I'm glad it got sorted out.

CProjects 4.5: Show old versions of approvals

Similar Messages

Maybe you are looking for