CProjects and PS Integration

Hi,
I want to integrate cProjects with PS and transfer the data at the time of "Release" of cProjects. May I know what steps I need to take to replicate the cProjects data in PS. I have already chosen transfer during "Release" in cProjects in the project type. But I am not able to link the project type with the project profile
Thanks

HI
Project profile for autoreplication is always CPR0001 in Standard
Also make sure you are using same project Id as needed for Mask Id in SAP PS
Niranjan
Let me know if it helps

Similar Messages

  • CProjects and xRPM integration

    Hello Friends,
    I am working on portfolio management(xRPM ABAP), i want to integrate capacity management & cost with cProjects.
    Could you tell me the settings i needed to do for my reqirement.
    Thanks.
    Regards,
    Senthil.

    Hi,
    yes, the integration is permanent.
    For Example....
    During transfer of work centers from Project System to xRPM, teams are created in xRPM for each of the work centre being transferred to xRPM. One can do this from SAP PLM PS by running the report RPM_WRKCNTR_UPLOAD,
    which transfers work centers to SAP xRPM and uses them to create team master data. The team name in xRPM is generated using a combination of plant and work center, because the work center ID is only unique within a plant and can be used again in a different plant.
    The resources assigned to the work center are used to create the resources assigned to teams in SAP xRPM. The employee IDs of resources in SAP PLM PS are used to search for business partners in SAP xRPM with identicalemployee IDs.
    If a match is found, the business partner is added to theteam.
    If the SAP PLM PS work center is created using organization units, the employees in the organization unit are derived during the transfer of the work center and used as the basis for creating teams. If new employees are added to the organization after you have run the report, these employees are not included in SAP xRPM system unless you run the program again. For
    this reason, you should run the program regularly (for example, weekly) or schedule it for background.
    Hope it helps you.
    Thanks
    Arbind

  • CProject, xRPM and PS integration

    I have some question about integration between SAP PS and cProjects/xRPM.
    I know that I can upload structure of project from SAP PS to cProjects and then to get some
    data to xRPM.
    Is this integration permament and in both directions?
    What I mean.
    When I change some data in PS eg. dates, structure or responsible persons will this be send
    automatically to cProjects and xRPM?
    The same in the opposite direction. When I plan some resources eg personnel will this be send
    to PS at the same time?

    Hi,
    yes, the integration is permanent.
    For Example....
    During transfer of work centers from Project System to xRPM, teams are created in xRPM for each of the work centre being transferred to xRPM. One can do this from SAP PLM PS by running the report RPM_WRKCNTR_UPLOAD,
    which transfers work centers to SAP xRPM and uses them to create team master data. The team name in xRPM is generated using a combination of plant and work center, because the work center ID is only unique within a plant and can be used again in a different plant.
    The resources assigned to the work center are used to create the resources assigned to teams in SAP xRPM. The employee IDs of resources in SAP PLM PS are used to search for business partners in SAP xRPM with identicalemployee IDs.
    If a match is found, the business partner is added to theteam.
    If the SAP PLM PS work center is created using organization units, the employees in the organization unit are derived during the transfer of the work center and used as the basis for creating teams. If new employees are added to the organization after you have run the report, these employees are not included in SAP xRPM system unless you run the program again. For
    this reason, you should run the program regularly (for example, weekly) or schedule it for background.
    Hope it helps you.
    Thanks
    Arbind

  • CProjects and xRPM Testing

    Hi All,
       What do we do test in cProjects and xRPM? Is it just the navigation and creating the roles, authorizations etc? or do we need to go into the backened (ECC) and validate? can someone throw some idea of testing cProjects. Also if we need to go into the backend, what are the tcodes we need to know? Someone please help me. I am a newbie.
    Regards,
    Vin

    Hi Vinu,
    From an end-user perspective, cProjects/xRPM is a pure web-based application. Everything is done in the browser.
    Backend transactions are mainly used by:
      - system administrators: authorizations, user accounts, monitoring (SU01, PFCG, SM37...)
      - technical experts / ABAP developers: SE80, SE11...
      - system configuration depending on your architecture and integration: HR module (PPOSE, PP01...), PS (CJ20N, OPSN, OPSI...), CRM... Actually all transactions linked to the corresponding module
    Regards,
    Matthias

  • CProjects -  SAP PS integration

    HI,
    I am facing a problem trying to link both systems (cProjects and SAP PS) when creating an Object link (PSP element) inked to a WBS element in SAP PS. Could someone tell me the steps to be followed in order to link a WBS element in PS with a WBS element in cProjects?
    Thank you in advance
    Héctor

    Hector;
    You need to configure the follow step's (I'm using SAP PPM 5.0):
    1) SPRO -> SAP Portfolio and Project Management -> Project Management -> Structure -> "Define Project Types"
    Here you have to make the integration of Project Type to the Financial integration mySAP ERP.
    2) SPRO -> SAP Portfolio and Project Management -> Project Management -> Connection to External Systems ->
    Integration with Other Project Management Systems
    Accounting Integration
       - Activate Integration
       - Define Object Links for Accounting Integration
       - Make General Settings
       - Define Cost/Revenue Rates
       - Replicate Cost/Revenue Rates
       - Replicate Accounting-Relevant Characteristics
       - Make Settings in ERP System
       - Make Project-Type-Specific Settings for Accounting Integration
          -> Make Project-Type-Specific Settings for Accounting Integration
    It's very important that you had configured cProject in SAP ERP system.
    You can download the Configuration Content of cProject.
    http://www.sapprojectsystem.com/2007/08/09/cprojects-overview/
    Also you need to configured the RFC conection (trx. SM59) with Basis.
    Hope this help you.
    Best regards,
    Mariano

  • Setting up ALE to integrate cProjects and HR CATS

    Hi Gurus,
    We're wondering if it is mandatory to set up ALE to integrate cProjects and HR CATS.  We found SAP note 954860 and we were trying to understand it, on a functional point of view, before to send it to our Basis team.
    We would like to get some advice on this.
    Could you please give us any hint?
    Thanks in advance for your response,
    Best regards,
    TP

    Hi TP,
    it is not mandatory. Basically you have two options for resources:
    - you can create resources (business partners) manually in cProjects. then you do not need the ALE integration to HR
    - or you can replicate the employee master data to cProjects. then you don't need the manual maintenance, but you have to setup the HR integration
    for CATS:
    - if you like to do time recording through CATS, you need the corresponding integration
    - alternatively you have some easy-to-use task dashboard for the resources involved in the projects inside the cProjects appliation. Users can access the tasks they are responsible for through there. but you do not have full CATS functionality then
    best regards
    Thorsten

  • CProjects PS/CATS integration with Rel 4.7

    Hi,
    we will install cprojects 4.5. on a stand alone system. The ERP-system is still on Rel 4.7. in the next few months. Is it possible to use the accounting integration (creating automatically WBS-elements out of cprojects) and to use the CATS-integration? I have read the installation master guide for cproject, on one page it says Rel >4.6 is required and on another if you want to use CATS integration you need ECC 6.0.
    Can anyone help me? What release do we need for PS and CATs integration?
    Thank's for your help!
    bestr egards
    Christine

    Hi Christine,
    Use this note 1088160  and 1088467 for support package .
    you can find all document for plm by using following link
    https://websmp108.sap-ag.de/plm-inst
    thanks
    sunil
    Edited by: sunil jawalkar on Apr 25, 2008 11:13 AM

  • CProjects Accounting / CATS integration

    Hi
    I am working on cProjects Accounting Integration and CATS integration.
    During same I am getting following messages:
      1. Acct Int.: Single-Obj. Contr. in SAP R/3  DCE458547A88A6F1B3640002A5CD3FB0 does not exist
    2.  Inconsistency between currency type 30 and currency EUR  
    Also, Internal Order is not getting generated.
    It is on ECC6 and cProjects 4.0
    Can anyone help me on the same?????
    If someone has any document to share please send it on [email protected]
    Niraj Sikliogar

    Hi Niraj
    To create the internal order , check the following things
         do the following things,
    .1)     Define company Name
    2)     Define company code, Credit control area, business area, Functional area, FM area.
    )3)     Maintain Controlling area.
    Prerequisite:  Need to define to Company following four things
    a)     Currency type: Defined in Company code
    b)     Currency: Defined in Company code
    c)     charts of account:
    d) Maintain Fiscal variant and assign it to company code.
    4)     Create Cost center
    Prerequisite for cost center:  Need to define 1) Standard Hierarchy 
    5)     Create cost element
    6)     Do the following assignment
    a)     Company code to company
    b)     Company code to credit control area
    c)     Company code to FM area
    d)     Profit center to Company code
    7)     Assignment company code to controlling area
    8)     Create model order: put $$  sign as order type.
    9)     Create the order type
    do the following things ,it will help you.
    any problem put the query
    Reward point if useful
    Regards,.
    nitin

  • CProjects to PS integration

    Hi
    I have been working on cProjects to PS integration for client server which runs on ECC6. Both cProjects and SAP objects are on the same server.
    I have done required configuration settings for the scenario, also for CO scenario maintenance view determination for my project type I have selected Multilevel controlling (Structure Element, Automatic), but still PS project from cProjects is not getting created.
    Is there anything am I missing ????
    Regards,
    Niraj Sikligar

    Hi Niraj,
    I checked your documet all config will correct just use following path
    It important to define a project number which fits the customizing seetings of project edition mask in project
    Step : Spro --> project system -->Structure -->oprative structures --> work break down structure --> @ Define project coding mask
    In that check the aviaable project Number
    The following characters are available for editing:
    X for alphanumeric characters
    0 for numeric characters
    special characters to organize the project numbers
    e.g Project coding key : SUN
           Coding Mask :-000-00-00
    Then you define the project defination as : SUN-100-01-00
    When you define project number in c project use this mask code ( check which mask code are define in your system and use that)
    and same will be created in your PS with same as project defination
    Thanks
    sunil

  • RPM-cProjects-PS Complete Integration...

    We are on cProjects-RPM 4.5. We have the accounting system/PS along with CPR-RPM in the same system.
    This is how we have set the integration:
    - create RPM item. This creates the cProjects Project automatically
    - setting the cProjects Project to "Flag for transfer" creates the PS Project
    From here on, we need to carry fruther with the following:
    - We intend to post costs and revenues (both planned and actual to the WBS elements in PS)
    - We intend to bring these costs (and revenues) under appropriate financial views in RPM, under Financial Planning
    Please advise.

    Hi,
    is there any link for  RPM-cProjects-PS Complete Integration?
    Thanks & regards
    Ravindra

  • Difference between SAP cProjects and SAP Project System

    Hi,
    SAP already has a solution PS ( Project System ) for managing the projects in an Organization.
    When there is a solution already existing then why did SAP come up with a new solution cProjects ?
    Can any help me in understanding the main differences and advantages between cProjects and PS ?
    Thanks and Best Regards,
    Priyatham

    Hi.
    I have copied an SAP text below which sets PS, cProjects, (x)RPM and PPM into context.
    In the ninties, the Project System was developed within SAP R/3 to provide a powerful application with full integration into logistics and financials.
    Target groups were industries such as engineering and construction, automotive, high tech or utilities with focus on project manufacturing or large maintenance projects.
    Later on, the need for more flexible and easy-to-use tools supporting the new process methodologies, phased-based approaches, quality gates, and so on, emerged. SAP developed Collaboration Projects and Collaboration Folders (cProjects Suite), which takes these new requirements into account and provides extensive features to collaborate with internal and external partners using a HTML-like interface and Web Application Server technology.
    Thus, cProjects was able to address to a broader range of industries, such as service providers, offering a high degree of visibility and flexibility to support various scenarios from product development to consulting projects. Nevertheless, cProjects is seen as a complementary product to Project System, not as ist successor!
    It always depends on the scenario that a customer wants to cover, which application is the best choice.
    As another matter of fact, combinations of both are also possible.
    In addition to this, the new generation of composite applications was born and SAP xApp for Resource and Portfolio Management provides excellent capabilities to align operational project management with strategic portfolio management.
    The latest developments bring all these three applications tighter together and offers a comprehensive solution for project and portfolio management by covering logistical, financial and human resource aspects and addressing the needs of all stakeholders throughout the entire organisation.
    However, xRPM capabilities are not only restricted to project portfolios but can be leveraged to control all kind of portfolio items.
    Regards / Anders

  • Oracle Portal and Discoverer Integration

    Portal Version: 9.0.2.0.1
    RDBMS Versjion: 9.0.1.3
    OS/Vers. Where Portal is Installed:: Suse 7 SLES
    Error Number(s)::
    Oracle Portal and Discoverer Integration
    We're trying to integrate Discoverer with Portal unsuccessfully.
    We made many things in accordance with oracle's documentation until add discoverer portlets (worksheet and list of workbooks) in a test page.
    In view mode, the worksheet portlet shows the error:
    "The portlet has not been defined. The publisher must define the portlet by clicking on Edit Defaults for the portlet on the edit mode of this page. Please contact the publisher of this page."
    We think we have to edit properties before. Is this? Anyway edit worksheet portlet crashes between step 1 and 2. The error is: "The listener returned the following Message: 500 Internal Server Error".
    We have a public conection created in EM and a discoverer application which can be viewed using plus or viewer.
    Furthermore, it's not possible delete the added portlets neither the page that contain it. The error at delete is:
    Error: An unexpected error occurred: User-Defined Exception (WWC-44082)
    (WWC-00000)
    An unexpected error has occurred in portlet instances: User-Defined Exception (WWC-
    44846)
    An unexpected error occurred: User-Defined Exception (WWC-43000)
    The following error occurred during the call to Web provider:
    oracle.portal.provider.v2.PortletNotFoundException
    at oracle.portal.utils.v2.ContainerException.fillInStackTrace(Unknown Source)
    at java.lang.Throwable.<init>(Throwable.java:78)
    at java.lang.Exception.<init>(Exception.java:29)
    at oracle.portal.utils.v2.ContainerException.<init>(Unknown Source)
    at oracle.portal.provider.v2.PortletException.<init>(Unknown Source)
    at oracle.portal.provider.v2.PortletNotFoundException.<init>(Unknown Source)
    at oracle.disco.portlet.provider.DiscoPortletPersonalizationMgr.destroy
    (DiscoPortletPersonalizationMgr.java:65)
    at oracle.portal.provider.v2.DefaultPortletInstance.deregister(Unknown Source)
    at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.deregisterPortlet
    (Unknown Source)
    at java.lang.reflect.Method.invoke(Native Method)
    at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.doMethodCall(Unknown Source)
    at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.processInternal(Unknown Source)
    at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.process(Unknown Source)
    at oracle.webdb.provider.v2.adapter.SOAPServlet.doSOAPCall(Unknown Source)
    at oracle.webdb.provider.v2.adapter.SOAPServlet.service(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
    at com.evermind.server.http.ResourceFilterChain.doFilter
    (ResourceFilterChain.java:59)
    at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
    at com.evermind.server.http.ServletRequestDispatcher.invoke
    (ServletRequestDispatcher.java:523)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal
    (ServletRequestDispatcher.java:269)
    at com.evermind.server.http.HttpRequestHandler.processRequest
    (HttpRequestHandler.java:735)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
    at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
    (WWC-43147)
    Edit properties for portlet List of Workbook works but in view mode we have the error in the portlet area:
    "Failed to refresh portlet. Please verify that the information used to create the
    portlet instance or customization is still valid. Otherwise, please contact your
    iAS administrator. oracle.discoiv.controller.FatalControllerException:
    DiscoNetworkException - Nested exception: org.omg.CORBA.OBJECT_NOT_EXIST: minor
    code: 0 completed: No null"
    Any ideas?
    Thanks

    Hi there,
    Have you applied any patches to 9ias since it was first installed? We had the same problem and had to apply a couple of patches to get the portlets working.
    1. Apply the 9.0.2.53.16 one-off patch for Oracle 9iAS Discoverer which takes Discoverer up to 9.0.2.53.16. This patch appears to be password protected and you need to get someone at Oracle support to give you a password.
    2. Apply the Discoverer Portlet Provider: 9.0.2.53.00c patch (patch no. 2595444) which gives you a new discportal.xsl file that actually works. It's this second step that solves your problem but you need to do step 1 before this. This is password protected as well.
    3. As you've upgraded Disco on the server to 9.0.2.53, you'll need to upgrade Disco Admin & Desktop within your 9iDS installation using patch no. 2555265. This is because Disco 9.0.2.53 uses an upgraded EUL that Disco Admin & Desktop need to be patched to use.
    This was the course of action Oracle support advised us about nine months ago. Of course they may have released a further patch to Disco that does 1 & 2 in one go, but we regularly carry out steps 1 and 2 on servers we use and we can use the Disco portlets successfully.
    Hope this helps
    Mark Rittman
    [email protected]

  • Unit testing and system integration testing for crystal report

    Hi gurus,
           I am creating crystal report by oracle procedure, will you please tell me how to do unit testing and system integration testing? appreciate very much.

    The focus of this forum is report design. The actual testing of reports would be subject to your own internal policies and procedures.
    Jason

  • Question regarding MM and FI integration

    Hi Experts
    I have a question regarding MM and FI integration
    Is the transaction Key in OMJJ is same as OBYC transaction key?
    If yes, then why canu2019t I see transaction Key BSX in Movement type 101?
    Thanks

    No, they are not the same.  The movement type transaction (OMJJ) links the account key and account modifier to a specific movement types.  Transaction code (OBYC) contains the account assignments for all material document postings, whether they are movement type dependent or not.  Account key BSX is not movement type dependent.  Instead, BSX is dependent on the valuation class of the material, so it won't show in OMJJ.
    thanks,

  • Jabber and O365 integration

    Hello,
    Do we need any additional licenses from Cisco or Microsoft to make a full possible integration between O365 and Jabber ?
    For example features like :
    Single Inbox Unified Messaging with SpeechView transcriptions,  Microsoft Word Click to Call, SharePoint Presence & Click to Call,  Jabber video calling and desktop sharing, and WebEx on desktop and iPad,
    Thank you for your help
    Best Regards,
    Tomasz

    Tomek,
    There is no direct integration between Jabber and Office 365, except for Exchange Gateway integration on IMP server side which is not supported with Office 365. All other Jabber integrations do not go to Office 365, calendar client integrations are done with Outlook, and UM integration is between Office 365 and Unity Connection, which does not affect Jabber.
    HTH,
    Chris (Krzysiek) :-)

Maybe you are looking for