CProjects: Error when check in a big document (100 and more MB )

Hello,
when I try to check in a big document (in my case I made my own document which is about 100 MB) in cProjects the current cProject webpage turns to "This page could not be displayed...".
The exact path where I tried to check in the document is:
Projects -> Structure -> Documents -> New Document
To see if its an abap coding error I set a breakpoint at Web Dynpro Comp. "DPR_Document" View: "VI_UPLOADDETAIL" Method: "ONACTIONUPLOAD". Further I tried it in the Method "new_doc_create( )" of the component-controller.
The point is:
The abap coding which is called if you click on the "Check in"-button is NOT called if the document is about 100 or more MB. (I don't tried it with smaller documents e.g. 60 MB, but never mind about this because document with a size of 100 or more MB should work too.)
Furthermore I had a look at the trace file which can be found at SMICM -> Goto -> Trace File -> Display All. Every time I tried to check in such a big document three error messages appear there with the following content:
[Thr 1396738992] *** ERROR => request too big {00047108} [http_plg_mt.c 1969]             
[Thr 1396738992] Address    Offset  REQUEST:                                              
[Thr 1396738992]                                                                          
[Thr 1396738992] 0x4d78895c  000000  504f5354 202f7361 702f6263 2f776562  POST /sap/bc/web
[Thr 1396738992] 0x4d78896c  000016  64796e70 726f2f73 61702f63 70726f6a  dynpro/sap/cproj
[Thr 1396738992] 0x4d78897c  000032  65637473 2f3f7361 702d636f 6e746578  ects/?sap-contex
[Thr 1396738992] 0x4d78898c  000048  7469643d 53494425 xxxxxxxx xxxx2533  tid=SID%xxxxxx%3
[Thr 1396738992] 0x4d78899c  000064  xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx  xxxxxxxxxxxxxx%3
[Thr 1396738992] 0x4d7889ac  000080  6130314f 4e6d6551 61724445 767a6978  a01ONmeQarDEvzix
[Thr 1396738992] 0x4d7889bc  000096  525a7a45 48536763 58637863 76325738  RZzEHSgcXcxcv2W8
[Thr 1396738992] 0x4d7889cc  000112  45786f73 302d5835 6a2d4e45 57204854  Exos0-X5j-NEW HT
[Thr 1396738992] 0x4d7889dc  000128  54502f31 2e310d0a 61636365 70743a20  TP/1.1..accept: 
[Thr 1396738992] 0x4d7889ec  000144  696d6167 652f6769 662c2069 6d616765  image/gif, image
[Thr 1396738992] 0x4d7889fc  000160  2f782d78 6269746d 61702c20 696d6167  /x-xbitmap, imag
[Thr 1396738992] 0x4d788a0c  000176  652f6a70 65672c20 696d6167 652f706a  e/jpeg, image/pj
[Thr 1396738992] 0x4d788a1c  000192  7065672c 20617070 6c696361 74696f6e  peg, application
[Thr 1396738992] 0x4d788a2c  000208  2f782d73 686f636b 77617665 2d666c61  /x-shockwave-fla
[Thr 1396738992] 0x4d788a3c  000224  73682c20 6170706c 69636174 696f6e2f  sh, application/
[Thr 1396738992] 0x4d788a4c  000240  766e642e 6d732d65 7863656c 2c206170  vnd.ms-excel, ap
[Thr 1396738992]                                                                          
[Thr 1398135728] Mon May 26 09:19:17 2008                                                 
[Thr 1398135728] *** ERROR => request too big {00087109} [http_plg_mt.c 1969]             
[Thr 1398135728] Address    Offset  REQUEST:                                              
[Thr 1398135728]                                                                          
[Thr 1398135728] 0x4d7688ec  000000  504f5354 202f7361 702f6263 2f776562  POST /sap/bc/web
[Thr 1398135728] 0x4d7688fc  000016  64796e70 726f2f73 61702f63 70726f6a  dynpro/sap/cproj
[Thr 1398135728] 0x4d76890c  000032  65637473 2f3f7361 702d636f 6e746578  ects/?sap-contex
[Thr 1398135728] 0x4d76891c  000048  7469643d 53494425 xxxxxxxx xxxx2533  tid=SID%xxxxxx%3
[Thr 1398135728] 0x4d76892c  000064  xxxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx  xxxxxxxxxxxxxx%3
[Thr 1398135728] 0x4d76893c  000080  6130314f 4e6d6551 61724445 767a6978  a01ONmeQarDEvzix
[Thr 1398135728] 0x4d76894c  000096  525a7a45 48536763 58637863 76325738  RZzEHSgcXcxcv2W8
[Thr 1398135728] 0x4d76895c  000112  45786f73 302d5835 6a2d4e45 57204854  Exos0-X5j-NEW HT
[Thr 1398135728] 0x4d76896c  000128  54502f31 2e310d0a 61636365 70743a20  TP/1.1..accept: 
[Thr 1398135728] 0x4d76897c  000144  2a2f2a0d 0a726566 65726572 3a206874  */*..referer: ht
[Thr 1398135728] 0x4d76898c  000160  74703a2f xxxxxxxx xxxxxxxx 7764662e  tp://xxxxxx.wdf.
[Thr 1398135728] 0x4d76899c  000176  7361702e 636f7270 3a353030 36362f73  sap.corp:50066/s
[Thr 1398135728] 0x4d7689ac  000192  61702f62 632f7765 6264796e 70726f2f  ap/bc/webdynpro/
[Thr 1398135728] 0x4d7689bc  000208  7361702f 6370726f 6a656374 732f3f73  sap/cprojects/?s
[Thr 1398135728] 0x4d7689cc  000224  61702d63 6f6e7465 78746964 3d534944  ap-contextid=SID
[Thr 1398135728] 0x4d7689dc  000240  xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx  %xxxxxx%xxxxxxxx
[Thr 1398135728]                                                                          
[Thr 1395682224] Mon May 26 09:19:18 2008                                                 
[Thr 1395682224] *** ERROR => request too big {0008710c} [http_plg_mt.c 1969]             
[Thr 1395682224] Address    Offset  REQUEST:                                              
[Thr 1395682224]                                                                          
[Thr 1395682224] 0x4d7688ec  000000  504f5354 202f7361 702f6263 2f776562  POST /sap/bc/web
[Thr 1395682224] 0x4d7688fc  000016  64796e70 726f2f73 61702f63 70726f6a  dynpro/sap/cproj
[Thr 1395682224] 0x4d76890c  000032  65637473 2f3f7361 702d636f 6e746578  ects/?sap-contex
[Thr 1395682224] 0x4d76891c  000048  7469643d 53494425 xxxxxxxx xxxx2533  tid=SID%xxxxxx%3
[Thr 1395682224] 0x4d76892c  000064  xxxxxxxx xxxxxxxx xxxxxxxx xxxx2533  xxxxxxxxxxxxxx%3
[Thr 1395682224] 0x4d76893c  000080  6130314f 4e6d6551 61724445 767a6978  a01ONmeQarDEvzix
[Thr 1395682224] 0x4d76894c  000096  525a7a45 48536763 58637863 76325738  RZzEHSgcXcxcv2W8
[Thr 1395682224] 0x4d76895c  000112  45786f73 302d5835 6a2d4e45 57204854  Exos0-X5j-NEW HT
[Thr 1395682224] 0x4d76896c  000128  54502f31 2e310d0a 61636365 70743a20  TP/1.1..accept: 
[Thr 1395682224] 0x4d76897c  000144  2a2f2a0d 0a726566 65726572 3a206874  */*..referer: ht
[Thr 1395682224] 0x4d76898c  000160  74703a2f 2fxxxxxx xxxxxxxx xxxx662e  tp://xxxxxx.wdf.
[Thr 1395682224] 0x4d76899c  000176  7361702e 636f7270 3a353030 36362f73  sap.corp:50066/s
[Thr 1395682224] 0x4d7689ac  000192  61702f62 632f7765 6264796e 70726f2f  ap/bc/webdynpro/
[Thr 1395682224] 0x4d7689bc  000208  7361702f 6370726f 6a656374 732f3f73  sap/cprojects/?s
[Thr 1395682224] 0x4d7689cc  000224  61702d63 6f6e7465 78746964 3d534944  ap-contextid=SID
[Thr 1395682224] 0x4d7689dc  000240  2533xxxx xxxxxxxx 33xxxxxx xxxxxxxx  %xxxxxx%3xxxxxxx
[Thr 1395682224]                                                                          
As you can see this error sais that the request is too big. A look into the coding of this cProjects webpage (where you can check in documents (look above)) the document is sent with the http method POST. Usually every webserver has an option where you can restrict the size for uploading files. But in that case the won't be an error out of a piece of c-coding (-> http_plg_mt.c).
Has anybody have an idea about a solution?
Edited by: Johannes Gilbert on May 26, 2008 12:25 PM

Hi,
this is handled by the profile parameters of the R/3 System. Look at
icm/HTTP/max_request_size_KB or something like this.
Best regards, Stefan

Similar Messages

  • Error when generating IDoc from MC document - workitem to all the SAP users

    A workflow item with the subject of “Error when generating IDoc from MC document” is sent to all the SAP users' inbox. Is it possible to stop the generation of this work item? If that is not possible, can we limit sending the work item to a specific user/agent instead of all the users in the system?
    It appears that these work item or error message are generated when one of the developers reopen the POs and add line items. Moreover, during that time the procurement team blocked the IDOCs from going out to the vendors when changing and resaving the POs. Therefore, we need stop the generation of error message/work item when the IDOCs generation blocked.

    Please check Rule 70000141which is the default rule for this task. Inside this rule a FM is attcahed which is reading table EDO13 and EDPP1 where agent is retrieved Probably this table entries are not maintained. This Workflow is getting triggered from Message cOntrol I think.
    Please check this link for
    http://help.sap.com/saphelp_47x200/helpdata/en/c5/e4aec8453d11d189430000e829fbbd/frameset.htm
    <b>Reward points if useful and close thread if resolved</b>

  • Error when select posting level in document type

    Hi,
    Did anyone have an experience to face the Abab run time error when select "posting level" in document type?
    The Error is : GETWA_NOT_ASSIGNED
    Short text
    Field symbol has not yet been assigned.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_UC_ITKEY_FACTORY===========CP" had to be
    terminated because it has
    come across a statement that unfortunately cannot be executed.

    If you searched the notes, as Dan proposed (and didn't find anything relevant), and the answer to the Greg's question is positive, then I would suggest regeneration data basis and ConsArea due to data model inconsistency.
    If it doesn't not help - open customer message to SAP.
    Edited by: Eugene Khusainov on Jan 26, 2010 10:26 AM

  • Error when generating IDoc from MC document

    Hi,
    Our Workflow administrator is getting the following error  in his inbox daily for a particular IDOC type.
    Error when generating IDoc from MC document
    Please let me know how to disable this message.
    Regards
    Elini.P

    Hi  experts,
                i got the error msg when generating idoc from mc document
    this error msg goes to all sap users inbox,how to resolve this problem
    pl give me solutions
    regards
    kumar

  • Error when checking package - SMLT

    Hi im trying to oimport new languanges into the system
    currently it only have en, de,
    i wan ti import addtional vi , zf, zh..
    rscpinst is done, and profile parameter is updated.
    Languange files are inside EPS/in folder, bot ecc languange  and ehp4 languange pack
    the problem is everytime i want to import, during searching the package it giving an error..
    my ecc system is wan ecc6 then upgraded to ehp4 , have anyone can advise, where to look detailed error..the message is too generic
    @0S@     Check Package Attributes
    @38@     Package component: WEBCUIF 700
    @01@     System component: WEBCUIF 700
    @1B@     Error when checking package
    Edited by: Muda Ikhsan on May 25, 2010 4:03 PM

    Hi
    For Language installation, please check SAP Note first specific to your language. Check for <language> install.
    1. You must know code page of your language, install that code page by executing RSCPINST report. Many times this report end with an error. So check following tables for your code page
    TCP0D This must contain your country code and empty language
    TCPDB This must contain your code page in both fields
    2. You are required to make changes in Instanse profile RZ10 for installed language, login language, check that sap note.
    3. First Create a language using SMLT. after you create, you will find an import icon in front of defined language.
    Click it, a new screen will appear,give the path as required and say import.keep on checking SMLT screen till the time it become green.
    Regarding Language CD, You have to order for specific language you want to install, latin american languages comes with standard kit, check Language CD of your Installation kit.
    PS.
    Never install language without reading notes specific to it. First finish all prerequisite then go for SMLT import. Keep one seperate session open and do not close it till the time u sucessfully log in into system after Lang Import.
    Cheers,
    Chaith

  • Java Script Errors when clicking on several opened documents

    All of a sudden I started having problems shutting down
    Dreamweaver MX 6.1
    Later , when I open two or more documents I get an error when
    I click on the document in the background.
    A series of dialog boxes come after eachother and say the
    following:
    1. While executing Browse_back enabled in toolbars.xml, a
    java script error occurred
    2. While executing Browse_back enabled in toolbars.xml, a
    java script error occurred
    3. While executing Browse_forwrad enabled in toolbars.xml, a
    java script error occurred
    4. While executing Browse_stop enabled in toolbars.xml, a
    java script error occurred
    5. While executing get current value in AddressURL.htm
    enabled in toolbars.xml, a java script error occurred
    I have uninstalled and reinstalled the program several times
    and it did not help. I have also installed Dreamweaver MX 6.1
    updaters with no change.

    You can try this simple fix -
    Quit DW.
    Find this folder -
    C:\Documents and Settings\<username>\Application
    Data\Macromedia\Dreamweaver
    8\Configuration\WinFileCache-*.dat
    (these folders are normally hidden - you may have to use
    Explorer > Tools >
    Folder Options to unhide them)
    or on Mac -
    Library/Application Support/Macromedia/Dreamweaver
    8/Configuration/MacFileCache-*.dat
    and delete it.
    Restart DW. Works better?
    Troubleshooting JavaScript errors in Dreamweaver
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19105#dat
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "anabelapinto" <[email protected]> wrote in
    message
    news:emh6hq$ke5$[email protected]..
    > All of a sudden I started having problems shutting down
    Dreamweaver MX 6.1
    > Later , when I open two or more documents I get an error
    when I click on
    > the
    > document in the background.
    >
    > A series of dialog boxes come after eachother and say
    the following:
    >
    > 1. While executing Browse_back enabled in toolbars.xml,
    a java script
    > error
    > occurred
    >
    > 2. While executing Browse_back enabled in toolbars.xml,
    a java script
    > error
    > occurred
    >
    > 3. While executing Browse_forwrad enabled in
    toolbars.xml, a java script
    > error
    > occurred
    >
    > 4. While executing Browse_stop enabled in toolbars.xml,
    a java script
    > error
    > occurred
    >
    > 5. While executing get current value in AddressURL.htm
    enabled in
    > toolbars.xml, a java script error occurred
    >
    > I have uninstalled and reinstalled the program several
    times and it did
    > not
    > help. I have also installed Dreamweaver MX 6.1 updaters
    with no change.
    >
    >

  • Error when determining a number from object BI_TSDTEL and number 01

    Hi BW Experts,
    After Transporting Infosources (Master & Transaction) to BW QA, the transfer rules were not getting activated in QA. The following error message was diaplyed.
    "Error when determining a number from object BI_TSDTEL and number 01
    Object name can only contain characters from syntactical character set
    Object name can only contain characters from syntactical character set
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Transfer structure 0IM_FA_IQ_2_SB activated under the name 0IM_FA_IQ_2_SA
    It is not necessary to copy dependent objects for transfer structure 0IM_FA_IQ_2_SA
    Transfer structure 0IM_FA_IQ_2_SA does not exist
    Error RSAR 440 when handling objects with type R3TR ISTS."
    I have gone through the Note: 674818.
    Could someone clear me about BI_TSDTEl, By using this do we need to maintain object intervals manually in all the systems like BW ( Dev & QA ), R/3 (Dev & QA).
    Because  I have not seen the Intervals in R/3 ( Dev & QA) systems.
    please could someone provide Inputs for this.
    Thanks in Advance
    Regards
    SK

    Hi,
    Try to see that transfer structure is existing in the sytem which is connecting in
    the BW quality.
    You need the same to be transported from the development server of R/3 to quality server of R/3.
    Just check if this helps.
    Regards
    Rahul Bindroo

  • I am trying to updat to 5.0 i have the latest version of itunes but it bring up the error 3194 and i have tried everything that it suggested includeing removing itues and reinstalling it i did get an error when it updated but dont know why and what for

    i am trying to updat to 5.0 i have the latest version of itunes but it bring up the error 3194 and i have tried everything that it suggested includeing removing itues and reinstalling it i did get an error when it updated but dont know why and what for

    sorry i was typing fast and didnt check spelling and stuff

  • I'm unable to open up Lightroom 5, I get this message in a pop up box: "Lightroom encountered an error when reading from it's preview cache and needs to quit" Underneath  that is "Lightroom will attempt to fix this problem the next time when it launches."

    I'm unable to open up Lightroom 5, I get this message in a pop up box: "Lightroom encountered an error when reading from it's preview cache and needs to quit" Underneath  that is "Lightroom will attempt to fix this problem the next time when it launches."  It hasn't, what should I do? Thanks Shawn (Irish Se7en) .

    Can you try to rename (not delete!) the folder named "YOUR_CATALOG_NAME Previews.lrdata" and restart Lightroom?

  • TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    Is that an error 2 message?
    If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • I get error when i try to install flash player and told to try again, but ir never works

    i get error when i try to install flash player and told to try again, but ir never works

    Hi,
    Please provide the following information so that we may be able to better assist you:
    Your operating system & version
    Your web browser(s) & version
    Your Flash Player version
    Explain your problem in step-by-step detail if possible
    A direct link to a page that demonstrates the problem
    If you get error messages, please quote them exactly, or provide a screenshot: http://forums.adobe.com/thread/1070933
    Maria

  • When I go to open lightroom a message pops up and says "lightroom encountered an error when reading from it's preview cache and needs to quit" I have already restarted my computer, that didn't do anything. I then uninstalled and then reinstalled and still

    When I go to open lightroom a message pops up and says "lightroom encountered an error when reading from it's preview cache and needs to quit" I have already restarted my computer, that didn't do anything. I then uninstalled and then reinstalled and still getting the same response.

    Open the folder containing your Lightroom catalog. Locate a folder with the extension .lrdata and delete that folder. Do not delete anything else. Then restart Lightroom. It will start building a new previews folder.

  • Recently i updated my software to 7.0.4 after that my mails automatically increased to more than 600 when actually i had not even 100. and i cant even see my mails there is no option to view them??

    recently i updated my software to 7.0.4 after that my mails automatically increased to more than 600 when actually i had not even 100. and i cant even see my mails there is no option to view them??

    Illaas,
    I tried the manual method.  I was able to set the music/video to manual and then restarted the entire system.  After restart, I re-attached the ipod touch to the computer.  The sync automatically ran for everything that wasn't set to manual and it completed without a problem.  I then reset the music/video to automatically sync and restarted the entire coputer/ipod set again.  This time when I re-attached the ipod, EVERYTHING synced and there were no problems reported.  I've never had to do this before, but I will keep it in mind if something like this happens again.  Thank you for pointing me to the manual sync.

  • Error message when checking WWI report template document in CG42.

    Hi Gurus.
    I'm facing troubles to check MSDS report template document  after upgrading the version 4.7 to ECC 6.0. When I try to Check the template I receive many msgs warnings like shown below:
    For Example One type of template warninfg from report document:
    Template Texts: (From the  UNDERLINED LINE i am getting the warnings)
    <01G1023001RP(C;1)>:<01G1023001RP(P;1)>:
    <13BNG034(+0101G1023001RP(C;2-),01G1023001RP(P;2-)>
    <11BRG023(D;2-*)>
    <01G1023001RP(C;2-)>:<01G1023001RP(P;2-)>:
    <11ERG023>
    WARNINGS from above template symbols:
    Symbol G1023001RP: Range to be overwritten by that of discrete repeating group
    Symbol G1023001RP: Range to be overwritten by that of discrete repeating group
    *Similar type of other warnings:*
    Symbol G1023001SY: Range to be overwritten by that of discrete repeating group
    Symbol G1023001SY: Range to be overwritten by that of discrete repeating group
    Symbol ZSUPNAM1: Range to be overwritten by that of discrete repeating group
    Symbol ZSUPNAM2: Range to be overwritten by that of discrete repeating group
    Symbol ZSUPSTR: Range to be overwritten by that of discrete repeating group
    Symbol ZSUPCTY: Range to be overwritten by that of discrete repeating group
    I realy don't know what is going on. Before in SAP 4.7 version When i check the template document i didnt receive any warnings like i listed above but i am receiving now. For your reference I am using the same WWI report template in ECC 6.0 also.
    Can anyone help me?
    Thanks in advance.
    Edited by: sunil29 on Aug 1, 2011 3:26 PM

    See note 920317.  That warning won't affect the result based on this example.  You are using (2-*) on both the Discrete repeating group and the symbol itself.  In your new system, the area you use discrete repeating group overrides the area on the symbol.  The note gives some examples.

  • Error 26253 : Error while  checking & storing in c:\\document & settings...

    Envir : ECC6.0 & DMS6.0
    We have successfully configured Dev box with content server. After we moved the transports , in the test box we are getting the following error when trying to upload document to repository. To be more precise this error pops up when we try to save doc to repository. On dev server we did not get this error.
    We have checked connection to content server using CSADMIN.
    also all config on Dev & Test are identical.
    Is there any settings that need to be changed in DMS? Any advice will be appreciated.
    Satish

    I have checked in Test Server & repository has been created.
    Are there any settings on the DMS server side which  BASIS ADMIN has to do or does only moving transport work?
    Is there anything else I can check.
    Regards
    Satish

Maybe you are looking for