CProjects integration with R/3 HR issue

Dear All,
We are replicating the HR details to cProjects (CRM) system.
The replication was happening fine and while the employees(resources) getting replicated to the cProjects system, a Business Partner (BP) number will get generated automatically for each and every employee.
All of a sudden, we have got an issue.
While the details are getting replicated to the cProjects system, but the BP number is not getting generated, the BP number is blank.
FYI: We have not done any changes to the cProjects system recently.
Will really appreciate your clues.
Thanks,
Vijay Anand

Hi,
We did all these settings. Just now we found out issue behind this.
In r/3 table PA0000 employees with the status 0-withdrawn are not downloaded to crm. In this table status of the employee should be active, then only it will download employees to crm.
Now the issue is client asking us to download employees who quit the organization. Please suggest if we need to add any filter to download employees who already quit the organization to crm.
Becuse there are some relationships existed for these employees earlier. When we try to download relationships from r/3 all bdocs are comming to crm and sitting in queues. Showing error. If we can download the employees who left the organization our issue with relationships also got solved.
Regards,
Madhu.

Similar Messages

Cproject Integration with BW ( Querys )

Hi gurus,
In Cproject i could get detailed information of a particular project by the status Report, but as i mentioned it´s only for a particular project.
I´m testing with BW integration but i´m dealing with some problems.
When i execute a standard querys eg. 0CPR_C01_Q0006, i get incomplete information because the phase and the task of every proyect are with '000000000000000000000' (empty), but the project name / description / responsible resource appears.
Can anybody help me with this?
Thanks for all.
Regards,
Diego

Hi Diego,
I am interested in BW integration with cProjects. But as of now i dont have much understanding on how it is working. Can you explain the way it is working. I am not able to find anything related to this. What is the transaction code to view/execute the queries available.
regards,
rajesh.

Portal integration with Exchange server 2003 issues.

Hello,
We are using NW04s EP 7.0 SP16 and Exchange server 2003. We are trying to perform OWA and Groupware integration. Both the servers are in the same domain.
I have followed all the steps in the notes and documents available there in SDN. There are few issues:
1) The latest KerbMap filter has been configured in Exchange backend server. SAP note 785343 says that the exchange frontend server needs to be configured for anonymous authentication to enable pass-through authentication. But doing this breaks the form based authentication in exchange server, and it also poses security risk when the backend exchange server is behind the firewall. How do we enable pass-through authentication so that the exchange frontend passes the mysapsso2 cookie to the exchange backend server?
2) When I try to create an appointment or try to view the appointments, it gives an error message saying " No logon data found for system Exchange". The Exchange system has been configured for SAP Logon Ticket, and the user mapping fields were left empty. Why should it prompt for user mapping when the logon method is "SAP Logon Ticket"?
There are many documents out there, but none is the latest with clear steps. Can anyone point me in the right direction please?
Thanks,
~Yasin

As far as I remember, when Exchange 2003 is installed on a Domain Controller, it uses the local DC as a GC. You need to set back the 2003 DC as GC and restart it.
I believe, you are aware that demoting/promoting a DC with Exchange server on it is not supported by MS. The best approach is to:
Introduce an Exchange 2010 member server
Move all resources from Exchange 2003 to Exchange 2010
Decommission Exchange 2003
Demote the 2003 DC
Step by Step Screencasts and Video Tutorials

CProject integration with MS Project

Hi,
Bascially can we upload MPP file directly to cProjects, if so what are the settings that we need to do.Do you have any documents which provide this information.
Normally i heard that MPP files gets converted into XML and this file is generally upload and direct upload from MPP file is not supported, is this correct.
Regards,
Srikanth ( [email protected])

Hi Rehman,
Thanks for your response, i will wait for your documents.
I have following questions and here is the business scenario.
customer download cProjects to MSProject.
now if he uploads same MSProject to cProject , it will result in simulation version
can we bypass this simulation version and update directly to operational version.
is it possible to provide your contact number to discuss this requirement.
Regards,
srikanth.([email protected]).

SSRS 2012 report integrated with SharePoint 2013 issue :Report refreshing after some idle time

we have SSRS 2012 report integrated with SharePoint 2013 , when we click on any toggle item after some idle time of 60 secs and try again to expand
another toggle item then complete report is getting refreshed and if we are in child report it is redirecting to parent report. . we didn’t set any refreshing property at report level. I hope there will be some idle time setting at sharepoint site
level.
what we observed.
1. there is no problem when we expand toggle items without any idle time.
2. when we open the report and expand few toggles and keep idle for 60 seconds and try
again to expand another toggle item then complete report is getting refreshed (all toggle items are collapsing).
3. If you keep idle for 60 minutes and if you didn’t do any action like expanding toggle
items it is not refreshing.
why it is happening and how to stop that complete refresh.
Surendra Thota

Hi Surendra,
I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
Please reference to the setting below to don't limit the timeout values if you got the report reloading:
Point to a report in the library.
Click the down arrow, and select Manage processing options.
In Processing Time-out, select Do not time out report processing or
Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
If you got the session timeout that refresh the page, please reference to the setting in below article:
http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
Details information in the article below about the timeout setting for your reference:
Set Processing Options (Reporting Services in SharePoint Integrated Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Issue in configure Information Steward 4.1 Metadata integrator with BO 4.1

Hi Experts,
Environment
Machine 1 :BO 4.1
Machine 2: IPS 4.1,DS 4.2,IS 4.2
We need to get the BO 4.1 metadata into information steward .As per IS install guide "If machine 1 has BI platform 4.1 SP1 and machine 2 has Information Steward installed on IPS 4.1, then you do not need to install the Remote Job Service utility. IPS 4.1 SP1 can collect metadata directly from a BI platform 4.1 system because the BI SDK is compatible between IPS 4.1 SP1 and BI platform 4.1 SP1.3"
what else we need to configure ?
Do we need to install 4.1 client in IS installed machine?
I'm getting below error when trying to add integrator
CMS Server name : BO 4.1 cms name , user name&PWD : BO 4.1 user and pwd
Infoview Integration user:BO 4.1 user&Pwd
Thanks in advance for help.

Hi Satish,
You must install the BI Client tools in IPS server (make sure that BI Platform in Machine 1 and BI Client Tools in Machine 2 must be of same version including support pack). Then before creating metadata integrator connection in IPS, try to connect BI server in Machine 1 from Client tools in Machine 2. For this you can use, UDT / IDT / WebI Rich Cleint to test whether Machine 2 is able to connect Machine 1 or not. If you failed at this level, then there problem with Firewall or port issue. We have to fix this before moving ahead.
If above test is passed, then go to IPS - CMC, check whether ISJobServer service is available, enabled and running. Disable this service and check what services are included under this. Check all the services related to IS is included or not. If not include all services, enable and restart the server.
Then you create the BOE Integrator source connection.
Thanks,
Ramakrishna Kamurthy

Issue with connection SSRS reportviewer control to SSRS 2012 integrated with SharePoint 2010...

Hi,
I have a .NET application that uses SSRS ReportViewer 2012 control to render reports deployed on SSRS 2012 integrated with SharePoint 2010. I am getting error "the report execution '' has expired or not found". The same code works when I connect
to SSRS 2008 R2 integrated with SharePoint 2007. I investigated the issue and it seems the JavaScript that pings the SSRS server before it expires is missing from rendered HTML.
Let me know if there is a way to fix this issue.
following is the code:
ASPX:
<formid="form1"runat="server">
<rsweb:ReportViewerAsyncRendering="true"
KeepSessionAlive="true"ID="test"runat="server"></rsweb:ReportViewer>
<asp:scriptmanagerrunat="server"></asp:scriptmanager>
</form>
Code Behind:
if(!IsPostBack)
this.Session.Clear();
        test.Reset();
        test.ProcessingMode =
ProcessingMode.Remote;
        test.KeepSessionAlive =
true;
        test.ServerReport.ReportServerUrl =
newSystem.Uri("https://webappname/_vti_bin/reportserver/");
        test.ServerReport.ReportPath =
https://webappname/RS_Reports/REportEngineTest.rdl;
ReportServerCredentialscred =
newReportServerCredentials();
            test.ServerReport.ReportServerCredentials = cred;
report server credentials:
publicICredentialsNetworkCredentials
get
// Use default identity.
returnnewNetworkCredential("user",
"pwd",
"domain");

What's the meaning of webappname, are you mean the sharepoint site?
I think this issue can be caused by the incorrect url. You can refer to the following link:
http://msdn.microsoft.com/en-us/library/ms154497(v=sql.110).aspx
Familyabc

MS Project Integration with cProjects

Dear All,
We are testing the MS Project Integration with cProjects 4.0. We have 1 query.
While importing the Project from MS Project to cProjects if changes are done then it creates the new project in cProject system.
Is it the standard MS Project Integration functionality ? We want the system to update the cProject only for the changes after Import is done. Can we get this ?
Thanks & Regards
Ashish Kulkarni

The system will create a new project only if you have cleared the Project ID field (in MS project).
Else (if you do not change the Project ID field), the system creates a simulation with the standard system provided simulation for the project.
Once you have the simulation ready (in cProjects), you are supposed to reconcile the operational project (main project in cProjects) with this simulated copy to bring the updates/changes into effect.
Hope this helps...

Integrating with Oracle EBS using XMLGateway issues

Hi all,
I'm trying to integrating with Oracle EBS using XMLGateway, and I meet some issues. Here are the steps I did.
1) Update DATA_MAP.xgm file and DATA_TEST.dtd file into XMLGateway repository
2) Define transactions in EBS client:
Party Type: Supplier
Transaction Type: Cat
Transaction Subtype: Dog
Transaction Description: test for cat and dog
Standard Code: OAG
External Transaction Direction: IN
External Transaction Type: Cat
External Transaction Subtype: Dog
Queue: APPLSYS.ECX_IN_OAG_Q
3) Define trading partners in EBS client
Operating Unit: Vision Operations
Trading Partener Type: Supplier
Trading Partener name: ****
Trading Partener site: ****
Company Admin email: [email protected]
... other transaction info defined in step 2)
4) Send inbound message using OTA send Inbound Page. It succeed.
a. The return page display status code 1000 with status discription OK.
b. From the transaction monitor, I can see the inbound message was processed successfully.
c. From the database, I can see that this inbound message first arrived in ecx_inqueue table, and then moved to ecx_in_oag_q_table. And last disappeared from the ecx_in_oag_q_table. That means XMLGateway process the inbound message in transaction queue successfully.
5) Send inbound message using SOAPUi. It failed.
a. The return page display status code 200. That means the inbound message has been sent to inbound message queue successfully.
b. From transaction monitor, I cannot see this request record.
c. From the database, I can saw that this inbound message first arrived in wf_ws_jms_in table, then disappeared. It didn't moved to transaction queue which I selected when defined transations, so I guess it wasn't processed by XMLGateway. Using the following SQL, but cannot find error reason.
select * from ecx_inbound_logs where process_id='******************'
select * from apps.ecx_error_msgs where error_id='*****'
I guess the reason is something happend to prevent inbound message to move from inbound message queue to transaction queue. So XMLGateway cannot process this inbound message.
From XMLGateway user guide, I understand that there are three kinds of inbound queues(ECX_INBOUND which OTA uses, WF_WS_JMS_IN which soap over https uses, WF_JMS_IN which JMS uses), does't mention what are the corresponding transaction queues? Can they share the same transaction queue? Also see from this user guide, ecx_in_oag_q (transaction queue) is only for ecx_inbound queue. But when I try to define a transaction in EBS client, it seems that only ecx_in_oag_q can be chosen. I wondered why my second senarios failed when I used the same transation and trading partner. The message already arrived at wf_ws_jms_in and then disappeared. Is that because I selected the wrong transaction queue when defining transactions? But it was really cannot select any other transaction queues there. Or I missed some steps when using SOAP over HTTP/S?
Appreciate you can give me some suggestions. Hope to hear your voice. Thanks in advance.

Hi,
Regarding the integration what type of integration you want.
Can you please elaborate?There are some integration tools releases by Oracle for the integration.
Regards
Pramod

Intel vPro AMT integration with SCCM 2012R2 - Issues with SCCM finding the "ConfigMgr AMT Web Server Certificate"

Good evening all,
I'm attempting to get Intel SCS integrated with SCCM 2012 R2 and I have both sides working, doing what they do best, however, I have issues when I try to mate the two. I started with a single server for the site and then tackled the Intel side with success,
then I added another site server to run the Out of Band service point and Enrollment point. Up until this point I've had no issues with certificate templates, or issuance of those certs.
I have re-read the TechNet documents a few times regarding the PKI setup, some Intel documentation and three step by step articles and non of them seem to differ so I can't understand why I'm unable to choose my "ConfigMgr AMT Web Server Certificate"
when configuring the Out of Band Management Component Properties page. The "AMT web server certificate template:" dialog shows my CA FQDN and CA name, but the certificate template list is always blank. I've tried this from both the remote
and local ConfigMgr consoles. The site servers have rights on the CA to manage and issue certs, is there something I'm missing that isn't in the documentation or buried somewhere that I missed? Is there a Application policy that should be on the
cert that isn't mentioned anywhere?
Thanks in advance!
Tesfaye

Hi Joyce,
Thanks for responding. I pretty much have this error repeating in the log file and not much else:
[28, PID:13388][05/21/2014 15:17:15] :System.DirectoryServices.DirectoryServicesCOMException\r\nThere is no such object on the server.
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_AdsObject()
   at System.DirectoryServices.DirectorySearcher.FindAll(Boolean findMoreThanOne)
   at System.DirectoryServices.DirectorySearcher.FindAll()
   at Microsoft.ConfigurationManagement.AdminConsole.Common.ADUtils.EnumEnterpriseCACertificateTemplates(String domainEntryName, String certAuthorityFqdn, Boolean isServerAuthen)\r\n
I will look into this, but another hint would be greatly appreciated!
Thanks,
Tesfaye

Facing issue when LDAPSync is enabled for OIM-AD integration with SSL enabled

Hi
We are performing LDAPSync for OIM AD real time sync.We have done all configuration as per oracle documentation on LDAPSync for OIM 11gR2 : http://docs.oracle.com/cd/E27559_01/integration.1112/e27123/oid_oim.htm The OIM environment we tested is the latest OIM version OIM 11gR2 PS1 (11.1.2.1.0).
WE have performed LDAPSync enablement on postinstallation of OIM .So we dont have OVD , we have configured libOVD as mentioned in this doc.
We have performed following steps mentioned in this document in our OIM environment.
3.1 Enabling Post installation LDAP Synchronization
3.3 Creating Identity Virtualization Library (libOVD) Adapters and Integrating With Oracle Identity Manager
As attribute like password might be not getting updated in AD from OIM , we have configured SSL enabled integration in LDAP sync as mentioned in above document.
We implemented this step 3.4.1 Enabling SSL Between Identity Virtualization Library (libOVD) and Microsoft Active Directory,
but here it is not properly mentioned that about how to import public key certificate of AD into OIM envirioment for SSL.
We are getting following error message in logs : Looking at logs it looks like the import of AD SSL certificate did not happen properly in OIM environment. But ,we have imported it using keytool and OVD keystore ...please let us know if we are missing any configuration in this process.Above oracle document is not pretty clear on this.
<Dec 7, 2013 12:22:53 AM IST> <Warning> <oracle.ods.virtualization.engine.backend.jndi.LDAP2.BackendJNDI> <OVD-40118> <Could not automatically detect binary attribute list: simple bind failed: 10.88.164.231:636.>
<Dec 7, 2013 12:22:53 AM IST> <Warning> <oracle.ods.virtualization.engine.backend.jndi.LDAP2.JNDIConnectionPool> <OVD-60024> <Connection error: simple bind failed: 10.88.164.231:636.>
<Dec 7, 2013 12:22:53 AM IST> <Error> <oracle.ods.virtualization.engine.backend.jndi.LDAP2.BackendJNDI> <OVD-60143> <[#LDAP2] Unable to create connection to ldap://[10.88.164.231]:636 as null.
javax.naming.CommunicationException: simple bind failed: 10.88.164.231:636 [Root exception is javax.net.ssl.SSLException: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty]
at com.sun.jndi.ldap.LdapClient.authenticate(LdapClient.java:195)
at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2720)
at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:296)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(LdapCtxFactory.java:175)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(LdapCtxFactory.java:193)
at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(LdapCtxFactory.java:136)
at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:66)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.ldap.InitialLdapContext.<init>(InitialLdapContext.java:134)
at oracle.ods.virtualization.engine.backend.jndi.JNDIConnectionPool.createCtx(JNDIConnectionPool.java:463)
at oracle.ods.virtualization.engine.backend.jndi.JNDIConnectionPool.create(JNDIConnectionPool.java:494)
at oracle.ods.virtualization.engine.backend.jndi.JNDIConnectionPool.<init>(JNDIConnectionPool.java:156)
at oracle.ods.virtualization.engine.backend.jndi.RemoteServer.getJNDIConnectionPool(RemoteServer.java:163)
at oracle.ods.virtualization.engine.backend.jndi.BackendJNDI.getLDAPContext(BackendJNDI.java:984)
at oracle.ods.virtualization.engine.backend.jndi.BackendJNDI.getConnection(BackendJNDI.java:927)
at oracle.ods.virtualization.engine.backend.jndi.ConnectionHandle.getHolder(ConnectionHandle.java:415)
at oracle.ods.virtualization.engine.backend.jndi.ConnectionHandle.search(ConnectionHandle.java:250)
at oracle.ods.virtualization.engine.backend.jndi.JNDIEntrySet.initialize(JNDIEntrySet.java:219)
at oracle.ods.virtualization.engine.backend.jndi.BackendJNDI.get(BackendJNDI.java:728)
at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:303)
at oracle.ods.virtualization.engine.chain.BasePlugin.get(BasePlugin.java:89)
at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:314)
at oracle.ods.virtualization.engine.chain.BasePlugin.get(BasePlugin.java:89)
at oracle.ods.virtualization.engine.chain.plugins.usermanagement.UserManagement.get(UserManagement.java:742)
at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:314)
at oracle.ods.virtualization.engine.chain.PluginChain.runGet(PluginChain.java:211)
at oracle.ods.virtualization.engine.chain.PluginManager.runGet(PluginManager.java:351)
at oracle.ods.virtualization.engine.chain.PluginManager.runGet(PluginManager.java:316)
...more
Caused By: javax.net.ssl.SSLException: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:190)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1731)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1692)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.handleException(SSLSocketImpl.java:1675)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.handleException(SSLSocketImpl.java:1601)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(AppOutputStream.java:94)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at com.sun.jndi.ldap.Connection.writeRequest(Connection.java:414)
at com.sun.jndi.ldap.Connection.writeRequest(Connection.java:387)
at com.sun.jndi.ldap.LdapClient.ldapBind(LdapClient.java:332)
at com.sun.jndi.ldap.LdapClient.authenticate(LdapClient.java:190)
at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2720)
at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:296)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(LdapCtxFactory.java:175)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(LdapCtxFactory.java:193)
at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(LdapCtxFactory.java:136)
at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:66)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.ldap.InitialLdapContext.<init>(InitialLdapContext.java:134)
at oracle.ods.virtualization.engine.backend.jndi.JNDIConnectionPool.createCtx(JNDIConnectionPool.java:463)
at oracle.ods.virtualization.engine.backend.jndi.JNDIConnectionPool.create(JNDIConnectionPool.java:494)
at oracle.ods.virtualization.engine.backend.jndi.JNDIConnectionPool.<init>(JNDIConnectionPool.java:156)
at oracle.ods.virtualization.engine.backend.jndi.RemoteServer.getJNDIConnectionPool(RemoteServer.java:163)
at oracle.ods.virtualization.engine.backend.jndi.BackendJNDI.getLDAPContext(BackendJNDI.java:984)
at oracle.ods.virtualization.engine.backend.jndi.BackendJNDI.getConnection(BackendJNDI.java:927)
...more
Caused By: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
at sun.security.validator.PKIXValidator.<init>(PKIXValidator.java:57)
at sun.security.validator.Validator.getInstance(Validator.java:161)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.getValidator(X509TrustManagerImpl.java:108)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:204)
at oracle.ods.virtualization.engine.util.OVDTrustManager.checkServerTrusted(OVDTrustManager.java:99)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:1198)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(ClientHandshaker.java:136)
at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Handshaker.java:593)
at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Handshaker.java:529)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:925)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1170)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.writeRecord(SSLSocketImpl.java:637)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(AppOutputStream.java:89)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
Let us know for any helpful pointers on this
Thanks in advance,
RPB25

Use the steps given below to perform import public key certificate of AD into OIM envirioment for SSL
Obtain the AD Certificates from the AD Administrator.
Copy the AD Certificates to the directory /jrockit-jdk1.6.0_20/jre/lib/security
Run the following command to import all the certificates
/jrockit-jdk1.6.0_20/bin/keytool -import -alias <provide_alias> -file <file-name> -keystorecacerts -storepasschangeit
4. The CA certificates are now present in the trust store.

Issues in BO integration with SAP EP

Hi All,
integration of SAP EP 7 and BOexi3.1.
My requirement is to show the BO WEBI reports in portal. My scenario is like directly connecting to BO from EP using SSO with out connecting to BI.
For Bo,Only data is comming from BI , Roles and user creation are saperately is done in BO only. Is it possible to connect do sso between SAP EP and BO with out connecting to BI.
BO is not using any Active Directory., users and roles are created in its own database and Portal users are stored in ume data base. how to achive sso between SAP EP and BO.
Thanks
Rajeev

Hi,
Go through the below link which gives great details on the BOXI integration with SAP EP.
http://wiki.sdn.sap.com/wiki/display/BOBJ/IntegrationofBOEXI3.1intotheSAPEnterprisePortal+7.x
You should be able to get the SSO details also here.
Regards,
Noor.

Session keep Alive when EBS is integrated with OIF acting as SP

We have an E-Business Suite R12(12.1.3) Application which is integrated with Oracle Access Manager 11.1.1.5. For authentication the Oracle Access Manager delegates the authentication request to Oracle Identity Federation acting as a Service Provider (SP). There is a home-grown SSO which acts as the Identity provider by Federating it with OIF using SAML 2.0 protocol.
The integration is successful and EBS is able to authenticate using this third party SSO.
Now there are multiple applications which are integrated with this third party SSO and the user can access any of these applications including EBS.
Considering a scenario where a user is using EBS Application say for more than 30 mins. Now when he tries to login to another application the challenge screen is thrown though he can continue to work on EBS without any issue. The reason being that the session timeout on the IDP side is set to 30 mins.
To overcome this issue the solution that has been thought of using a javascript for each page load on the application which will update the SSO token with the latest UTC time on the IDP server. This has been successfully done for all other applications except EBS.
So my question is how we can call this java script for each page load for EBS?
Thanks & Regards
Sarbashis

It appears that OAM is removing the url parameters for the p_done_url sent to it by OIF.
302 Redirect to -> Location: https://sso.mycompany.com/oam/server/logout?p_done_url=https%3A%2F%2Fsso.mycompany.com%2Ffed%2Fuser%2Fsloosso%3Fid%3Dosso%26type%3D3&invokeOSFSLogout=false
Result: 200. Set-Cookie OAM-ID to expired.
Form Submits: https://sso.mycompany.com/fed/user/sloosso
Result: 500 Error
Notice the p_done_url value in the redirect has extra parameters which when the Form is submitted are lost.
If I manually enter the url: https://sso.mycompany.com/fed/user/sloosso?id=osso&type=3&invokeOSFSLogout=false
Then I am successfully logged out.
This seems almost like a bug in OAM...

RE: Legacy Integration with PI/Open

Greg -
We are currently working on wrappering the APIs for UniVerse (aka Pick on
UNIX).
We received some help from the guys at RTD in Denver.
We tested out a C program that uses the Universe APIs and it works fine.
We will be building the Forte piece and compiling it this week.
Our first application is to inquire the UniVerse data, after that is
successful, we will move to inserting & updating.
Let us know how we can help.
Larry McCartney
[email protected]
(203)459-7959 - Trumbull
From:
[email protected][SMTP:[email protected]
om]
Sent: Monday, October 12, 1998 11:00 AM
To: [email protected]
Subject: forte-users-digest V1 #1111
forte-users-digest Monday, 12 October 1998 Volume 01 : Number
1111
In this issue:
Legacy Integration with PI/Open
is OBB32.dll available
Java Integration
Java Integration
Re: Legacy Integration with PI/Open
RE: Forms That Will Not Close
RE: Forms That Will Not Close
RE: Forms That Will Not Close
Re: AfterValueChange event trigged when it shouldn't be...
math library
From: [email protected]
Date: Mon, 12 Oct 1998 09:49:56 +1000
Subject: Legacy Integration with PI/Open
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.
Thanks in advance for any help.
Greg Barber.
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you
received
this in error, please contact the sender and delete the material from any
computer.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "sridhar t" <[email protected]>
Date: Sun, 11 Oct 1998 22:01:36 PDT
Subject: is OBB32.dll available
hi,
am working on forte3.0.G.2. when i tried to use objectbroker library i
am unable to find the runtime objectbroker library (OBB32.dll). is this
dll available with this version. if not is there any alternative.
thanks,
sridhar,
Goldstone Softech USA
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:12:22 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:26:26 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Tim Hagemann <[email protected]>
Date: Mon, 12 Oct 1998 09:21:06 +0200
Subject: Re: Legacy Integration with PI/Open
Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have arequirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experiencein
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue isthat
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering
the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 09:38:25 +0200
Subject: RE: Forms That Will Not Close
Exiting the event loop will not close the window! Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
Hi,
We seem to be having some type of deadlock problem when trying to
close
forms and am wondering if anyone else has experienced this problem.
The
phenomenon does not always occur and is not specific to any one client
machine.
I will explain the phenomenon:
1. We have an object that contains our main application startup
method.
This method then instantiates our main application window (Control)
and
invokes the Display() method using start task.
2. All other forms created by the application are created using a form
manager service object which exists on the client partition. The form
manager has a CreateForm() method which instantiates a form class of
the
specified type and invoked the form's Display() method using start
task.
3. Each form has a Close push button which when clicked invokes
Window.RequestFinalize().
Now, the problem we have is this:
The user starts the application and the main application window is
displayed. The user then selects an option from the main window and a
child form is created using the form manager service object and is
displayed. The user can continue to create more child forms by
selecting
options from the main window and all child forms are instantiated and
displayed correctly.
However, when the user attempts to close one of the forms the form
does
not close. The finalize event is triggered and the event loop is
exited,
but the form continues to be displayed and does not close. If the user
then moves the mouse pointer over the main application window, the
child
form immediately closes. Moving the mouse cursor over other child
windows (or even the desktop) does NOT do this - only when the mouse
cursor is moved over the main window does the child form close.
Does anyone have any ideas on this?
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>- -
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Jason de Cean <[email protected]>
Date: Mon, 12 Oct 1998 17:47:20 +1000
Subject: RE: Forms That Will Not Close
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as well
Regards,
Jace.
On Monday, 12 October 1998 17:36, Rottier, Pascal
[SMTP:[email protected]] wrote:
Exiting the event loop will not close the window!
Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits
the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 11:04:24 +0200
Subject: RE: Forms That Will Not Close
Jason,
No, self.Close() should close the window. This is the
method I referred to. You could place a traceline
behind self.Close() to see if it is executed. It is not
inconcievable some exception may exit the Display()
method before self.Close() is executed.
After that, maybe, some events from your main
window trigger something that causes a call like 'My-
Window.Close()', where 'MyWindow' is a subclass of
'UserWindow', so 'MyWindow' gets closed after all.
Maybe you've overridden 'Close()', so now it doesn't
work properly anymore.
Are you sure you exit the event loop after you press
the close button?? The display method is not regis-
terred for any <PushButton>.Click event, though maybe
you just didn't include the full Display method in your
mail.
Remember that an event loop will only respond to an
event if it is not currently handling an event. So, the
method behind <PushButton>.Click may call a self.
Window.RequestFinalize(), which will cause an After-
Finalize event to be posted, which will be placed in
the event queue. If this method however keeps waiting
for something, the event loop will not respond to the
AfterFinalize event, until this method is done waiting.
Pascal.
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as
well
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Thomas Kunst <[email protected]>
Date: Mon, 12 Oct 1998 14:28:55 +0200
Subject: Re: AfterValueChange event trigged when it shouldn't be...
Which version of Fort=E9 are you using? We had some strage problems with
GUI events in Fort=E9 3.0.F.2, which disappeared now that we use 3.0.J.1!=
Fouche, Jaco wrote:
=
Hi there,
=
I'm hoping that someone out there has experienced the following (and
knows why it is happening. ) :-)
=
I have a couple of windows on which the AfterValueChange event is
triggered on a field upon hitting the delete key.
We all know that this should only happen upon leaving the field, ie. th=e
field loosing focus. The problem is that I'm trying to recreate this in=
a simple test class, but now it won't happen. I still have the original=
windows on which it is happening, but I would like to construct
something small and simple to send to Forte.
=
Any ideas as to why this could be happening?
=- -- =
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Greg Gorham <[email protected]>
Date: Mon, 12 Oct 1998 09:51:07 -0400
Subject: math library
I need direction to the source of Forte libs that handle more scientific
math. Also included is the need for more scientific print formating. I
understand, second hand, that such material is available from third
party vendors/sources.
Thanks
Greg Gorham
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
End of forte-users-digest V1 #1111
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

CUCM 8.6.2.20000-2 integrated with Office 365?

Hi people,
VOICE MAIL APPLICATION:
Does anybody knows something like that? How to integrate with Cisco Unified Communication Manager 8.6? It is similar the integration with Exchange 2010?
Best regards,
Daniel

Unless you can create a SIP trunk on Office 365 and allow traffic to pass between CUCM and Office 365 across the SIP trunk it would not work. Cisco never supported any Exchange UM for voicemail, it works, but if you have issues Cisco is not going to help you there. No different here, if you can get it to work based on the above, then support is on you.
HTH,
Chris

CProjects integration with R/3 HR issue

Similar Messages

Maybe you are looking for