CProjects Phase Approval : Approval Document does not exist

Hello,
I am trying to approve a phase in cProjects 4.0 (WD ABAP Based).
When I goto Approval Tab --> Approval Document, it displays:
Approval Document does not exist
I have checked the configuration and everything looks correct.
For Project Type I have activated the Form DPR_APPROVAL_HIER
The ADS is configured properly.
I also checked Note 874054 - You cannot start approval w/o approval document, and the config is as per this note.
What else can be likely reasons for this problem.
Any help is appreciated.
Regards,
Shubham

Hi Shubham,
As per SAP, ADS is supported by the following servers only:
Windows server 2003 on IA32 32 bit
Linux Suse SLES 9 on x86_64 64 bit
Linux Red Hat EL 4 on x86_64 64 bit
AIX 5.2, 5.3 64 bit
HP-UX 11.11 on PA-RISC 64 bit
HP-UX 11.23 on PA-RISC 64 bit
Solaris 9 on SPARC 64 bit
Solaris 10 on SPARC 64 bit
Refer http://service.sap.com/pam - Netweaver 2004s - Additional Components.
Check the Server on which your cProjects has been installed.
Regards,
Reema.

Similar Messages

  • Excise Invoice creation error -Billing document does not exists

    Dear Experts,
    I have created supplementary sales order, billing with refernece through sales order by VF01.
    Now I want to create Excise Invoice but system gives error Billing Document does not exists
    I have checked billing document in VBRK table & it is showing in table.
    My item categroy is L2N -and set it to C
    I have assigned Billing type under Outgoing excise invoice ->Assign billing type to delivery type still my excise invoice is not generating.
    Pl. guide me.
    Thanks
    Trupti

    Resolved my problem.
    Actually in Billing item categroy if you put SD Doc. Catg. as M you can do excise invoice even if you have not created the
    outbound delivery.
    So cycle will be Supplementary Sales Order->VF01 with ref. to SO->J1IIN -Excise invoice creation.
    Thanks to all.
    Trupti.

  • "Document  does not exist" exception when updating a Purchase Order, Agentry

    Hello Gurus,
    I updated a PO in SAP by calling the Bapi. It displays the error:
    com.syclo.sap.mm.steplet.POUpdateSteplet::throwExceptionToClient::1513::POUpdateSteplet - Document  does not exist |
    I checked on SAP and found the PO there. And in the log file, the PONumber, Company code are sent to the server. Then  why It throws the above exception.
    I spent a day but cannot find out what happen to the PO. Please help me. Thank you very much.
    Edit: Even though I hard coded the PO Number, it still display the error.
    JCO.Structure header = _imports.getStructure("IS_POHEADER");
      String poNumber = user.getString("transaction.PONumber");
      setValue(header, log, "PO_NUMBER", poNumber);
      String companyCode = user.getString("transaction.CompanyCode");
      setValue(header, log, "COMP_CODE", companyCode);
      String purchaseOrg = user.getString("transaction.PurchaseOrganization");
    JCO.Structure headerX = _imports.getStructure("IS_POHEADERX");
    setValue(headerX, log, "PO_NUMBER", poNumber);
    setValue(headerX, log, "COMP_CODE", "X");

    Jason,
    I checked the SAP error log and found the issue in the log. I am not sure if it is the cause of "Document doesnt exists. Please help me figure it out. Thank you very much.

  • Error "Account assignment 00 for  purchase document does not exist " when u

    Hai,
    I am encountering the following problem when posting a PO based Invoice using BAPI_INCOMINGINVOICE_CREATE.
    The error says " account assignment 00 for purchasing document does not exist".
    The scenario is very simple.  I need to raise an Invoice against a PO. the PO has a single line item of quantity 10 net price 10.  Tax code is U2 ( 7% tax).
    I am passing the following at header level.
    Invoice_indicator ( as 'X'),company code,doc date , posting date, gross amount (107, currency USD, calc tax indicator as 'X'.
    At line item i am passing Invoice document item 000001, po number , po item number, tax code(U2) item amount (100),
    Does this error has got any thing to relate configuration matters?
    Regards,
    Upender

    Hi Upender,
    In some cases, depending on the type of PO / Posting,
    you might have to populate the accounting data itab and pass in the BAPI parameter.
    you can select the accounting data from EKKN for the PO.
    Again it depends on the PO category, wether you need to populate Qty & Unit in accounting data.
    Further, the accounting data should be exactly the same as there in EKKN ( all the fields except Qty & Unit ).
    Thanks,
    Ram

  • Document does not exist (Message 06 619) in creation of PO

    Hi All
    Can any one help on this below issue:
    The error is 'Document does not exist' on each item that was on that RFQ to wrong vendor.
    That is because I sent them out on an RFQ with different vendor.
    Now I wish to process and save the PO to correct vendor.
    How do I get rid of those errors that do not allow me to save PO?
    Thanks
    Sada

    issue resolved

  • PO Print Preview  Error 06019 "Document  does not exist"

    Hi people , i`ve the following issue. I`ve noticed that when creating a PO if the user clicks con the "Print Preview" BEFORE Holding or Saving the document , the system will give the following error msg :
    Document  does not exist
    Message no. 06019
    And then the system will hang , you won`t be able to go back and the whole PO is lost . Does anyone knows how to solve this ? thanks a lot for any help .

    Issue already discussed in this link Re: Unable to Save RFQ and PO.

  • Shopping cart Document does not exist error while PO creation

    Hi Friends,
      We are in SRM 5.0 Extended Classic and ECC6.0. I am experiening a issue while sourcing. After shopping cart is created and ends up in sourcing cockpit, I try to create PO, I get the error 'Shopping cart Document does not exist'. I verified Number ranges, org structure, and config settings but unable to find a solution.
    This is at a critical stage where I am not able to create PO and hence process is not complete. I am not able to proceed further and need advise on how or where to look for possible issues. I did look at the other SDN postings but was not pertaining to mine.
    Thanks
    Rao

    hI
    Did you get below error message  **** pit.
    Data not found
    Document does not exist
    i believe the error message will not stop you to do sourcing.
    select and assigned to work area and assign source of supply and create a Purchase order.
    i also faced this error long back.
    br
    Muhtu

  • Error at the time of J1IFQ(Sub Contracting) "The Document does not exist."

    Dear All
    At time of Quantity Reconciliation for Sub-Contracting Challan (J1IFQ) i am getting the error " The Document does not exist."
    But 103 & 105 already made without any error.
    Please help me out.
    Chandrashekhar

    Hi,
    Could you please let us know process which you are following for it ?
    I hope it goes like this.
    - Create PO
    - Transfer posting goods to subcontractor
    - Create sub contracting challan
    - Receipt of goods
    - Quantity re concilliation
    - Closing the challan
    If it is with the above process..it should work..
    Thanks and Regards
    Deepak Gupta

  • 'Purchasing document does not exist' error while testing Inbound PO Idoc

    Hi experts,
    i am working on Inbound PO Idoc scenario. I am testing Idoc in WE19 with ORDRSP mesage type.
    Idoc type:ORDERS05
    Process code:ORDR
    FM:IDOC_INPUT_ORDRSP
    while trying to create PO it is giving an error 'Purchasing document does not exist' in we05.
    please suggest me how to resolve this???
    Regards,
    Bhuvan.

    Hi,
    first time i am testing this IDoc and i don't find any field in Idoc structure to provide purchase order value.
    any more inputs plz??
    regards,
    bhuvan.

  • BAPI_PO_CREATE1 document does not exist

    Hi All,
    I'm creating P/O using BAPI_PO_CREATE1.
    But, below messgae returned and not created P/O.
    Type    Message
    E     Document   does not exist
    E     No instance of object type PurchaseOrder has been created. External reference:
    W     "Latest acceptable GR" date exceeded by a schedule line
    W     Effective price is XXXXXX USD, material price is XXXXXXX USD
    W     Can delivery date be met?
    W     Can delivery date be met? (Realistic delivery date: 2010.08.02)
    W     "Latest acceptable GR" date exceeded by a schedule line

    Hi SUNGJIN LEE
    Kindly check the dates provided form ur side and the functional config for the scheduled line and for creating the PO form it .
    Error would come if u have not provided the data as per your configuration ..
    Regards
    Swapnil

  • Billing document does not exist in VF22

    Dear Experts,
       We are working on Invoice list it gives output with LR00.
    but we have created a new output type ZPGR and assigned in
        SD>Billing>Billing document>Invoice List>Maintain Output for Invoice list
         Prgram-RLB_INVOICE and smart form ZS_INVOICE_PACK_2_GRP
    and VF21 i was able club billing documents. but in VF22 while issuing output it give error 'Billing document does not exist'
    checked and found because VBTYP in VBRK for invoice list document(LR) it is 3. but RLB_INVOICE program checking values MNOPSU56.
    any idea how to deal with, is there any other program instead of RLB_INVOICE to assign smart form
    Please suggest
    Regards
    Siva

    Hi Sunkesula,
    below is the sample Z print program.
    i copy some of the code from RLB_INVOICE and change the sapscript calling method to smartform calling method.
    REPORT Z_TEST.
    INCLUDE XXXX. "you may define any include you want
    INCLUDE XXXX. ""you may define any include you want
    *       FORM ENTRY
    FORM entry USING return_code us_screen.
      DATA: lf_retcode TYPE sy-subrc.
      CLEAR retcode.
      xscreen = us_screen.
      PERFORM processing USING us_screen
                         CHANGING lf_retcode.
      IF lf_retcode NE 0.
        return_code = 1.
      ELSE.
        return_code = 0.
      ENDIF.
    ENDFORM.                    "ENTRY
    *       FORM PROCESSING                                               *
    FORM processing USING proc_screen
                    CHANGING cf_retcode.
      DATA: lf_formname           TYPE tdsfname,
                lf_fm_name            TYPE rs38l_fnam.
    * SmartForm from customizing table TNAPR
      lf_formname = tnapr-sform.
    * determine smartform function module for invoice
        CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
          EXPORTING
            formname           = lf_formname
    *       variant            = ' '
    *       direct_call        = ' '
          IMPORTING
            fm_name            = lf_fm_name
          EXCEPTIONS
            no_form            = 1
            no_function_module = 2
            OTHERS             = 3.
        IF sy-subrc <> 0.
    *   error handling
          cf_retcode = sy-subrc.
          PERFORM protocol_update.
        ENDIF.
      ENDIF.
    "call the fm of the smartform. You may pass in any data you would like to display here
    CALL FUNCTION lf_fm_name
    ENDFORM. " processing

  • Document does not exist in the calender year 2006

    Hi,
    I am getting an error message while posting MIGO stating that "Document "XXXXXXXXX" does not exist in the calender year 2006" Please help to resolve this issue...
    Thanks in advance....
    Senthil Kumar

    Hi Senthil
    Try these steps
    Go to TCode SU01 ==> In that go to the change tab with your loging Name
    ==> go to Parameters tab ==> give Parameters MMPI_READ_NOTE with
    date
    format as YYYYMMDD (say today 20060612) and SAVE.
    Go to MMPI T-code and open the old periods which you want to post into,
    But one thing the period opening will be valid for only for the
    particular day only. After you complete the posting you have to close
    the periods through MMPV accordingly,
    Regards,
    Sachendra Singh

  • Handling Unit Change Document does not exist

    I have created a Handling Unit and made changes to the Handling Unit. When I go into HUMO > GOTO > Chnge docs, the screen is blank. Further to this if I display the status of the Handling Unit, the change documents is not ticked. Basically, I would like to see all change documents relating to a Handling Unit. Your assistance is appreciated. Txs Poobie

    Hi,
    You've checking the @ correct place to see Change Documents but why you're not able to see those ?
    Are you sure that you've changed HU?
    Check if any 'Data Changed' exists in Tab-General Info of HU. If any Changed  Date & By exists, then it should display in Change Docs.
    Revert back.
    Regards,
    Anup

  • Reset Processing Status function for Custom Document does not exist?

    Expert,
    I have a need to reset Process Status of Custom Document from
    "Blocked - Awaiting Reply from Authorities" to previous status. Many times we will receive error messages from US AES and require further processing and resent.
    According to help.sap.com documentation, i should be able to find this function through
    System Administration. Choose System Monitoring ® Status of Customs Declarations/Shipments.
    I don't seem to be able to find this in our GTS 7.20 system. I have SP 009.
    Please help.
    Thank you,
    Wen

    ok. I received the answer from SAP. The transaction to reset processing status of custom declaration is
    /n/SAPSLL/CDOC_STARES accessible through role Menu /SAPSLL/LEG_SYS_COMM.
    Wen

  • Approver does not exist

    Hi,
    I have an issue with Leave Request for Edit/Cancel options:
       - if employee cancels/edit leave request (that has been previously created in portal), the application works fine.
       - if employee has an absence created directly in backend, when he tries to edit/cancel the leave request (the absence has been registered directly in backend, so no leave request exists), the employee gets the error "Approver does not exist"
    Issue seems to happen in function PT_ARQ_REQUEST_CHECK when calling
    perform find_and_set_nextprocessor                                                   
         changing
           im_request-next_processor
           no_more_approver_check.
    this variable   "im_request-next_processor" is empty and once in the form, we only change processor if the name is not initial....
                 if ch_next_processor-objid is initial and not ch_next_processor-name is initial.
    Do you have any hints for this?
    Thank you
    Carla Sousa

    Hi Siddarth,
    I really appretiate your help. I am currently trying to enhance the PT_ABS_REQ
    method IF_EX_PT_GEN_REQ~FIND_RESP_AND_DEFAULT_NEXT_PRC and also try to implement a post-exit method on CL_HRESS_PTARQ_LEAVREQ_GUIBBL on method get_data.
    So far, I still get the error message. Do you have any hint about which mehtod i have to re-implement to overcome this issue?
    Something tells me the solution could be easily solved in PT_ARQ_REQUEST_CHECK inside
    perform find_and_set_nextprocessor                                                   
         changing
           im_request-next_processor
           no_more_approver_check.
    the check  "if ch_next_processor-objid is initial and not ch_next_processor-name is initial." was replaced by " if ch_next_processor-objid is initial . "
    I have created the following incident   778514 / 2014
    thank you in advance.
    Best regards,
    Carla Sousa

Maybe you are looking for

  • Adobe Application Manager does not work

    I am afraid this is not the appropriate forum, but it is the closest I could find, sorry about that. I experience a problem where I can't update my Adobe products, the application manager gives two different erros. I've come across the issue when I t

  • Valiable file name in JSP include

    Hi, I am trying to include a html file in a JSP page. The filename comes from the properties file and hence is a variable. The JSP file that has this include does not cache the JSP page plus it "refreshes" (reloads) ever 30 seconds. When I include th

  • AP Rogues 'On Network'

    We see several Rogue APs in our network which are, according to WCS, not 'On Network'. However, most of them do turn out to be 'On Network': their MAC address appears as connected&active in a switch port. I wonder if this is because the 'On Network'

  • Printing Problem in Adobe Forms

    Hi, We have created Adobe Form and it is working fine but the problem is with printout. when we issued output and click on print, the output comes with larger font size. Is there any settings in output parameters for printing same as print preview? I

  • Purchased lightroom digitally and is no longer available to redownload

    I had purchased Lightroom a couple months back digitally with the student discount price. I since have had computer problems and had to uninstall some programs. Now that everything is fixed I can no longer find proof of purchase or re install lightro