CProjects - PS - elements on the first level in reversed order

Hello,
I am using the hierarchical Accounting with PS and facing a problem with the order of the created elements.
The project definition and the second level are in the correct order. Somehow the first level (-> the level with the phases in cProjects) are in reversed order.
Can someone tell possible reasons for this?
Thx, Max

Hi Max,
It is a known problem, but there is no solution so far . The purpose of the replication is for the controlling, and from the controlling point of view. It does not care, which wbs is on the left or on the right. There is even a note to indicate this system behaviour.
Kind regards,
Zhenbo

Similar Messages

The screen on my macbook has malfunction. When I change the brightness to zero and return to the first level of brightness it works briefly but then the screen starts to flicker brightness and quickly extinguished.

The screen on my macbook has malfunction. When I change the brightness to zero and return to the first level of brightness it works briefly but then the screen starts to flicker brightness and quickly extinguished. It seems to be a bad contact, it would not be normal for a quality product that should have, he has less than two years of use. Not because of the bad use or crash. Someone with the same problem or can help me? It's really a contact problem? I've done all the procedures recommended by the online support. Thanks.

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

Regarding the first level navigation par file customization

Hi
i require the help on the first level navigation par file customization.
i downloaded the rthe required par file from the server for changes.
the name of the par file is <b>com.sap.portal.navigation.toplevelsingle.</b>.
my requirement on this par file is i want to add an image file (.gif) to the first level navigaton at the end of the header.
can u guide me how to do the chages to add an image in the top level navigation
header file for this in the par file.
reply ASAP
Regards
sunil

Hi Sunil,
Do you really want to place the image at the right side of the TLN - or at the header (which is different)?
In the first case, there is a mixture of JavaScript and JSPs (containing JS) which build up the TLN, and this is quite complicated to understand (at least too complicate for a SDN thread). You would have to work through the code and try to modify it carefully.
In the secondd case, you are touching the wrong PAR, but you would know the right one (as you opened a different thread about such a modification).
Alternatively, you could try to use the light framework page, using the navigation tag library. This way, it is more easy to design your own UI, including the nav functionality.
Hope it helps
Detlev

How to burn data CD/DVD that opens to the first level of folders?

I want to burn a data disc (with Toast if possible) that automatically opens up to the first level of folders with no toolbar when inserted.

Neither.
This what the Audio CD option is for.

Remove anchor from the first level in Breadcrumb

Hi All,
I am trying to display the selected navigation path in the breadcrumb.
The requirement is to disable hyperlink in the first level of the breadcrumb.
For ex: Home > News> Local News, here Home should be displayed without hyperlink
I used the below code.
      <nav:iterateNavNodesInSelectedPath>
     <nav:navNodeAnchor navigationMethod="byURL" />
     </nav:iterateNavNodesInSelectedPath>
Please suggest me on this
Thanks
Muthu

Hi, Barry. I don't know why this solution didn't work for me :-\ Does it matter that my page numbers are in the footer and not the header? When I follow your direction, the pages do get numbered differently. My problem occurs with the last step.
1. Open the Inspector. (Check!)
2. Click the Layout button (second from left). (Check!)
3. Click Section. (Check!)
4. Make the two settings shown: (Check!)
5. Go to Page 1 and delete the contents of the Header. (When I do this, the content for all footers is deleted...)
I really appreciate your insight.

Determine Order of the First-Level-Navigation

Hello,
im currious, as the First-Level-Navigation is determined by the assigned roles of a user, how can you set the overall order of the menu entries, considering a user got more roles assigned?
regards,
Markus

Hi Markus,
that is done via the property Priority, which can be between 0.0 (outmost left) and 100.0 (outmost right)
If several roles have the same Priority, they will be ordered by Role ID or Role Name.
Kai

How to get only the first level of nodes for a subform?

How can we get only the first level of nodes of a subform?
For ex:
Form1
     SubForm1
          Text1
          Text2
          RadioButton1
     SubForm2
          Text1
          Text2
          RadioButton1
     SubForm3
          Text1
          Text2
               SubForm31
                    RadioButton1
In this heirarchy if we give Form1.nodes will refer to all nodes under the Form1 (SubForm1,Test1,Text2,RadioButton1,SubForm2,...SubForm31, RadioButton1 etc..)
But is there any way that we can access only the first level of nodes of Form1 ie can we get only (SubForm1,SubForm2,SubForm3) for Form1 in any Way..?
Thanks.

Two ways .....
1. Use Javascript E4X instead ...there are nice functions for getting children of parents.
2. Cycle through all of the form1.nodes and look for objects that have a className of "subform". For loops are useful for this task.
Make sense?
Paul

Put Purchase Orders checkbox in the first Tab in sales order window

How do I use UI SDK to put the Purchase Orders checkbox in the first tab in sales order window?

I want to enable the checkbox during form load, therefore I include the following codes:
Case SAPbouiCOM.BoEventTypes.et_FORM_LOAD
                    '// Specifies that SAP Business One application opened a form.
                    Try
                        SBO_Application.Forms.Item(FormUID).Items.Item("104").Click(SAPbouiCOM.BoCellClickType.ct_Regular)
                    Catch ex As Exception
                        SBO_Application.MessageBox(ex.Message)
                    End Try
But it doesn't work.

Lock the first row in an ordered table

Hi,
I have a table (TD_EVENTOS). I want to lock the row with te minimun value of a column (a timestamp called hora_evento) and some requirements of other columns. Then i build a cursor like this:
CURSOR c is select * from td_eventos where (...) order by hora_evento for update skip locked;
And then I make a fetch into this cursor and I get the row (locked) that I want. But i need the speedest way, and making that cursor it orders all rown in the table (when I only want the first row without lock) and when that table has 6000 or 7000 rows it wastes around 130 ms. My solution is to add to the WHERE a AND rownum < 50, and it only orders 50 rows (in 10 ms), but it orders 50 aleatory rows, and that`s not what I want.
Any solution faster?
Thanks!

Sorry that wasn't clear of me and could be misleading. I didn't mean Oracle would have to do a full table scan, another access path such as an appropriate index scan would do. I was trying to get across that to do any kind of order or min or max, all records have to be investigated. Since the fact that you don't know a row is locked until you try to lock it, you clearly can't filter on it (it's not a data attribute).
Apologies for any confusion my earlier post might have caused.
The suggestion about using a sorted hash cluster still stands though, they are designed for FIFO queues.
Which reminds me - SKIP LOCKED is in fact undocumented but everybody knows that Oracle use it internally for doing AQ. Since it's undocumented, you don't know how it works, when it will work, when it won't and of course Oracle can turn around and say "we don't support this".

Trying to print the date arrays in reverse order....

Hi,
I'm trying to print the dates in the arrays in reverse order using the for loop, but its not working and i think ive got something in the wrong order perhaps the constructor or method. Or do i need to define 'a', because i tried it and i couldn't unless, probably because i was putting the wrong code for it.
Thanks for your help
public class Array
public static void main(String[] args)
          a[0] = new Date(2, " January ", 2005)
          a[1] = new Date(3, " February ", 2005)
          a[2] = new Date(21, " March ", 2005)
          a[3] = new Date(28, " April ", 2005)
                               printDate();
class Date
public int day;
public String month;
public int year;
public Date(int d, String m, int y)
    day = d;
    month = m;
    year = y;
public void printDate()
for (int i = a.length - 1; i >= 0; i--)
              System.out.println(a);

I don't see where this 'a' variable is declared anywhere, so what did you expect it to do? Also, you can't just call Date's printDate method from your Array class like that. You really need to start with the java tutorials or take a course. The forums aren't going to effectively teach you the very basics.

Attempting to run Elements for the first time and the Adobe Application Manager was stopped. What to try next?

What to try if attempt to run Elements for first time and Adobe App Manager was stopped?

has the program you want to run been successfully installed?
if not, install it.
if yes, restart your computer and run the program.

How long the first level certificartion is valid

Hello,
I have passed the exam 1Z0007 (Step 1- Oracle 9i-SQL) in 2009. But I did not take the 1Z0-144 - PLSQL to get the Associate certificate then.
I am willing to get it now. So can I just take the step 2 exam (1Z0-144) or should I have to take both the exams (1Z0-007 and 1Z0-144) now as it has been a while since I completed 1Z0-007?
Thanks,
Siva

Test results do not expire. All that the retirement of 1Z0-007 means is that the exam will not be offered to new candidates after July 31st. I wrote an article that says this in more detail here:
http://ezinearticles.com/?Oracle-Exam-1Z0-007-Is-Being-Retired:-What-Does-That-Mean-to-Me?&id=7547576

How to limit the rows in the item level in sales order

hi
i have created a sales order here my requirement is in item level there are so many line items i want to limit the line items to 5 num is it possible

Dear chandra
In billing it is possible. But if you want in sale order, apply user exit in program MV45AFZB - USEREXIT_CHECK_VBAP.
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
thanks
G. Lakshmipathi

If you create a 3 level deep site heirarchy (with the first two levels based on the document centre template) the sharepoint OOTB breadcrumbs break

if you create a site collection with document center as the template, then create another document center site (as a subsite) underneath it. Then create a team site (as a subsite) in this document center site. So now you have a 3 level deep site heiarchy
with 2 levels of doc center followed by a teamsite.
Note that the breadcrumb (when I say breadcrumb I mean the drop down folder button which shows the heirachy) shown on the teamsite skips the middle level doc center.
I have replicated this bug in production and in my test server. Has anyone run into this before? This must be something peculiar with the Doc Center template. If I do the same thing but I make the middle level a team site I do NOT have
this problem
krd

Hi,
Per my test, it seems that if the second level uses a different category template except the Collaboration templates, the site will not show on the breadcrumb.
No matter if the first level uses any template, when we view the subsite which uses the Collaboration templates, all the subsites which uses a different category template above will not show in the breadcrumb.
You can create your own breadcrumb using code.
http://blog.mastykarz.nl/building-breadcrumbs-sharepoint-2010/
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Show a menu of roles in the Top Level Navigation

Hello,
Imagine a scenario where a user has many roles assigned to him (say 40 roles). In that case the user will have 40 tabs in the first level of the top level navigation and by default a horizontal scroller appears on the right part of the screen clicking on which the roles will scroll horizontally. If the user has to go to the 40th role he has to click quite a lot.
Is it possible to have a menu option clciking on which we get the all the list of roles in the top level navigation in a vertical list and we can directly jump to any role clicking on the entry in the list ?
Something like what we get in a tab strip in Web Dynpro.
Thanks in advance for your valuable inputs.
Sundeep
Edited by: Sundeep Sethi on May 3, 2011 3:00 PM

Hi,
Yes it is possible to have menus as you wish .
Look at the following links
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/6066b302-09c8-2a10-a894-eb9fef30df85
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0a1aea5-a2d1-2a10-c6bc-953bdadfdcb8?QuickLink=index&overridelayout=true
You need to work on navigation tag libraries to extend number of levels .
The above inks helps you only for single level of navigation.
Regards
Karthiheyan M

CProjects - PS - elements on the first level in reversed order

Similar Messages

Maybe you are looking for