CProjects Status Report Printing

Good Morning,
Is it possible to restrict for certain users not have view/print the cProjects status report,  but they should able to access all project types for other part of the cProjects elements, if any one done this before = please share with me?
Regards
Goli.

Hi Goli,
You can do this by hiding the "Status tab" for those users. Take help of basis team.
Regards,
Yaghag

Similar Messages

  • CProjects Status report not visible

    Hi
    I am trying to disply the project status report but unable to do so.
    When I click on Preview butttonto display status report, new screen opens with Save, Save and Send and cancel button but could not see report there.
    Is there anything missing with JAVA applate setting?
    Working on ECC6 server.
    Thanks and Regards,
    Niraj Sikligar

    Hi Niraj,
    Run the following reports in Transaction SE38
    1. FP_PDF_TEST_00
    specify connection as ADS
    This should return certain version information. If this is succesfull go for the next one.
    2. FP_TEST_IA_01
    Keep everything on the selection screen as it is and execute.
    Note: If you get an error that says: "Cannot find PDL type for output device LOCL",
    Open the report in SE38 in display mode.
    Navigate to the source code:
    * Set output parameters and open spool job
    fp_outputparams-preview  = 'X'.    " do not launch print preview
    fp_outputparams-nodialog = 'X'.      " suppress print dialog
    fp_outputparams-connection = p_conn.
    Place a session break-point on
    fp_outputparams-connection = p_conn.
    and then execute the report (F8).
    When it stops at the break-point, double click on fp_outputparams-nodialog  and remove the X on it.
    (you may take help from a technical guy here)
    Continue by pressing F8.
    A print pop-up will appear, change output device from LOCL to PDF1 and continue (F8).
    Check wether a form is displyed or not.
    Regards,
    Reema.

  • Cannot save status report in cProjects

    Hi,
    I cannot save project status report in cProjects. When I click the save button, it just shows the timer showing saving icon but never comes out of it.
    Could anyone please help and guide me where the problem lies?

    Hi ,
    There may be mainly two reasons
    1) As neil say  check your ADS Installation
    2) Check the  IMG setting as follow
    Collaboration Project -->  Basic Settings --> Form for printing and project Status Report
    in that use Activate forms per Project type .
    Select your project and click on right hand side PDF print form
    you will find the list of status report , check there status report print form is active or not.
    if you standard
    then DPR_STATUS_REPORT_AIF   Is activated or not.
    3) Collaboration Project -->  Basic Settings --> Form for printing and project Status Report
    in that check the BADI
    DPR_STATUSREPORT_PDF AND
    DPR_STATUSREPORT_AIF
    Is ACTIVATE OR NOT
    if you create your own status report form you need to create BADI .
    thanks
    sunil

  • Sample status report cProjects 4.0

    Would someone have an example cProjects status report that contains data?  We are having trouble getting this to work in our system.  I'm working on the ADS configuration now to address the problem. 
    It would help if we could see what the report would look like with some example data.  We don't know if we should be focusing a lot of energy on fixing this while we don't know what it looks like.  I checked what the PDF layout looks like, but I would still like to see an example with some populated data.
    Thank you,
    Wendy

    We were able to see this in our system following a fix to the ADS configuration.

  • Task status  report in cProject 3.1

    Hi,
    I want to extract task status report from cProject 3.1.
    Report should contain task name, status, start date,end date , effort etc.
    Thanks in advance
    Shiv

    Hi,
    Activate the form DPR_TASK_HIER for a particular Project type in SPRO screen. Now keep the cursor on any task in cProjects & click on Print pushbutton, this will generate a PDF Report which will contain Task name, Constraint dates, actual dates, administration details etc. In order to add more data to the Report, goto transaction SAMRTFORMS & edit the form DPR_TASK_HIER.
    Hope this will help you.
    Regards,
    Sujay G

  • Status Report Preview Error in cProjects

    Hi Experts,
    I have created one Project Type in cProjects, with reference to Project Type i have created Project with all the elements. Next step is i want to see the Status Report of my Project. When i press Preview button i am getting the following error message:
    "Error occurred when generating the print preview (function module: /1BCDWB/SM00000010)
    ADS: SOAP Runtime Exception: CSoapExceptionTransport :(100101)  "
    Kindly help me in resolving the above issue. Thanks in Advance.
    regards,
    Sridhar.
    Edited by: SridarReddy on Dec 1, 2009 9:33 AM

    Hi Daniel,
    I have the same problem.
    When i press Preview button i am getting the following error message:
    "Error occurred when generating the print preview (function module: /1BCDWB/SM00000010)"
    Could you please tell me what configuration changes you have done on ADS server?
    Regards
    Ramesh

  • Project Status Report - cProjects 4.0 - Run time error

    Under Basic Settings, I go to 'Forms for Printing and for Project Status Reports'. Here, under 'Create PDF-Based Forms', I select the form 'DPR_STATUS_REPORT_AIF' and Activate it. I then get to 'Activate Forms per project type'.I get to 'New Entries' and add 'DPR_STATUS_REPORT_AIF' and also set the 'Active' and 'Status Rpt' checked.
    When I get to cProjects front end, I see the 'Project Status Report' template under the 'Status Report' tab. However, when I click on the 'Preview' button, I get to see a dump.
    "The following error text was processed in the system SRP : WebDynpro Exception: SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code(100.101)"
    Can someone please suggest how to get something useful at the click of the preview button?
    Thanks.

    Hi,
    Yes your basis team should tell you more about this. ADS Credential needs to be installed on the java stack of your cProjects Server. For this you will have to send a message to SAP requesting for the ADS Credential. You will then receive a credential file with its password.
    However not all servers support ADS. There is a list of server names that support ADS. You can get the server name on which cProjects is installed from your basis team and I shall let you know if it is supported or not. You can also have a look at in the PAM (Product availability Matrix) for SAP NetWeaver 2004s - Additional Components at http://service.sap.com/pam
    Regards,
    Reema.
    <i>Pl award all useful answers.</i>

  • Project Status Report - cProjects 4.0

    Hi all,
    I am using cProjects 4.0.
    After selecting the PDF Print form DPR_STATUS_REPORT_AIF for the project type and marking 'Active' and 'Status' report checkboxes, when I go to create Status reports, I can see the template "Project Status Report". However, when I click on the "Preview" button, I get a runtime error saying
    "The following error text was processed in the system DRP : WebDynpro Exception: SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP server replied with status code 500(100.101). "
    Can someone suggest please?

    Hi,
    Are you able to open any other pdf forms in cProjects. for eg. approval document?
    I guess you need to get the exact location of error.
    After the system gives a dump, run transaction ST22 and  get the program/function name where the error is actaully occuring.
    Regards,
    Reema.
    PS. pl. award points to all useful answers.

  • CProjects 4.0 - Status Report  Problem

    Hi all,
    I am using cProjects 4.0.
    I have selected the PDF Print form DPR_STATUS_REPORT_AIF for the project type. I have also marked the Active and Status report checkboxes.
    Now, when I go to create Status reports, I can see the template "Project Status Report". However, when I click on the "Preview" button, I get a runtime error saying <i>"OBJECTS_OBJREF_NOT_ASSIGNED_NO"</i> in the ABAP program "CL_WD_ADOBE_SERVICES" in the method "CREATE_PDF".
    Pl help provide a solution to this.
    Regards,
    Reema.

    Hi all,
    I am using cProjects 4.0.
    After selecting the PDF Print form DPR_STATUS_REPORT_AIF for the project type and marking 'Active' and 'Status' report checkboxes, when I go to create Status reports. I can see the template "Project Status Report". However, when I click on the "Preview" button, I get a runtime error saying
    "The following error text was processed in the system DRP : WebDynpro Exception: SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP server replied with status code 500(100.101). "
    Can someone suggest please?

  • CProjects 4.0 - Project Status Report

    Hi All,
    I am using cProjects 4.0
    Under SPRO, I get to "cProjects > Basic Settings > Forms for Printing and Project Status Report".
    Please list out the sequence of activities to enable me get and use Project Status Report from the front end. A detailed response would be highly appreciated.
    I tried a few things which aren't quite working
    Thanks very much.

    Hi Bittu,
    Go to SPRO
    -> cProjects->Basic settings->Templates for Printing and for Project Status->Create Temples and then Activate Templates per Project type
    After the above settings are done, the Project status report from the front end is enabled and you can view them in cProjects.
    Wish you much success.
    Bye Dudle

  • Printer Status Report

    Printer: HP Photosmart 5515 on the label (but HP Photosmart 5510d B111h on the Printer Status Report).
    Operating system: Win 7
    Why does item 25 in my Printer Status Report show incorrect "Ink Install" dates? Depending on the colour, the date of installation of each ink cartridge is given as four or five days earlier than the actual date of replacement.  I would have thought that the date would be exactly as per my desktop computer to which the printer is connected via a USB cable.
    The printer is less than one year old and has given the incorrect dates from the moment the original set-up cartridges were replaced.

    HI LincsP,
    You are correct that the dates should in fact change and show the exact dates. This will not affect your ability to print or print quality at all. It may have something to do with you needing a product update. You can click here to find out how to check for a product update on your printer. 
    When it's time to change a cartridge next time print the Status report before you replace it and then again right after you replace it. If the same thing happens please scan the sheets and attach them to this thread for me to look at. 
    Let us know what happens.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • How to configure a new status report in cProjects?

    First of all, the standard status report PDF is not rendering at all when we generate the status report - we CAN send it with the appropriate data, though, so we know that the program is gathering the data. All of our other custom interactive PDFs are working fine.
    Our issue is that we'd like to create a new custom status report but can't figure out how to do it.
    We've done the following:
    1) create a read only form (zstat_rpt)
    2) in SPRO, for our capital and expense project types, we've entered
    ZSTAT_RPT in the PDF Print Form sub-folder. Marked it as ACTIVE and
    checked the Status Rpt checkbox.
    3) Unchecked the DPR_STATUS_REPORT_AIF Status Rpt and Active checkboxes
    4) Under Badi: PDF-Based Forms in SPRO, we created a new Enhancement
    Implementation (zrp_eimp_stat). It uses BAdi Implementation DPR_STATUSREPORT_AIF
    and the description shows as Izrp_eimp_statmplementation: BAdI: PDF-Based Forms
    5) In SE19, I go to the badi implementation, into method GET_FORM_NAME and changed
    the Returning parameter RV_FORM_NAME to ZSTAT_RPT (my pdf form).
    Now, when i go to generate the status report, I get a message "No templates for status reports have been entered for the project type" - I know my project type is capital.
    any help on this? any steps I'm missing?

    Hi,
       I dont think that we can insert new records in WE47, but we can develop the logic in the idoc population program to add status to the idoc.
       Please let me know if you need the program code.
    Regards,
    donepudi

  • 'Project Status Report' activation in cProjects

    Hi,
    I was trying to configure the ‘Status Reports’ in cProjects. I have completed creation of the form (chose DPR_PROJECT), activated the templates for the relevant Project type and also implemented the Badi with the correct form name. I am still unable to see any template dropdown in the application (cProjects). The DPR_Project template should appear in the same for me to create the Status Report. Please advice.
    Thanks,
    Sachin

    Hi Sachin ,
    I think, it may be a ADS installation issue.
    The configuration of ADS server is somehow not very easy, as I saw so many installations problems with status report in cProj. 4.0.
    Would you please check the following notes:
    900310 & 992492      .
    And the following reports may be helpful to check the setting:
    FP_PDF_TEST_00 (returns version number of ADS)
    FP_TEST_00 (creates a test PDF)
    FP_EXAMPLE_01 (creates a test PDF using SFLIGHT data)
    FP_TEST_IA_01 (creates an interactive PDF that can be signed via certificate)
    FP_PDF_TEST_12 (returns signatures of a signed PDF &#61664; requires secure (SSL) ADS connection &#61664; ADS_HTTPS)
    Kind regards,
    Zhenbo

  • Cannot load project status report in cprojects on portal

    Hi,
    I have checked all the FP_* adobe test programs and my ADS is working fine. I did test my form in ECC transaction code sfp and the form loads properly.
    But, when I try to load the project status report(same form) through portal (cprojects)it is giving me connection timeout error.
    Could somebody guide me?
    Thanks.

    Hello,
    there can be several reasons why the Statusreport does not come up
    a) ACF component is not installed correctly
    Check as described in note [766191|https://service.sap.com/sap/support/notes/766191] if the  ACF is installed correctly
    b) ADS is not set up correctly
    Check as described in note [944221|https://service.sap.com/sap/support/notes/944221] if the ADS is installed correctly
    c) cProjects config for the status reports is not set up correctly
    Check as described in note [978997|https://service.sap.com/sap/support/notes/978997] if your system is set up according to the configuration guide
    Best Regards, Andrea
    Edited by: Andrea Langlotz on Jun 11, 2008 8:55 AM

  • Cannot see project status report pdf inside cprojects using Firefox

    Hi,
    I am using firefox software to view project status report in cprojects. It shows me blank.
    But if I view Approval document, the pdf shows correct in the browser.
    As you might be aware,Please note these pdf reports display inside the webpage area,so please donot reply with solutions of opening pdf in separate browser window etc.
    Please help

    Hi,
    Are you able to open any other pdf forms in cProjects. for eg. approval document?
    I guess you need to get the exact location of error.
    After the system gives a dump, run transaction ST22 and  get the program/function name where the error is actaully occuring.
    Regards,
    Reema.
    PS. pl. award points to all useful answers.

Maybe you are looking for