CProjects tab in ECC 6.0

Hello,
My client is asking to remove the cProjects tab which appears in WBS level.Since this is standard SAP functionality i know that this tab cannot be removed.Atleast can someone tell me how to make this tab invisible by some configuration change.I know that it can be done in "User Interface Settings".I dont know how to go about it.Please guide.

remove using layout detail config - user interface config
copy standard, enter profile, act *

Similar Messages

PO Account Assignment Tab in ECC - with Split Accounting

Hello,
We currently are using Funds and WBS Elements within our SAP system. When both a fund and a WBS Element are used on one line item within the shopping cart, I am able to see all of the information (fund, wbs element, fund center, cost center, commitment item, etc). However, after the purchase order is created and transmitted to ECC the "Account Assignment Category" is marked as "X - All aux.acct.assgts." and the account assignment tab only has the following column headers:
- Sequential Number of Account Assignment
- Quantity
- Distribution Percentage in Case of Multiple Account Assgt
- Cost Center
- G/L Account Number
- Order Number
- Asset Subnumber
- WBS Element
- Sales and Distribution Document Number
- Sales Document Number
- Delivery Schedule Line Number
- Unloading Point
- Goods Recipient/Ship-to Party
- Deletion Indicator: Purchasing Document Account Assignment
I can see that the fund is within the EKKN table (Field: BP_GEBER) but for some reason ME23N does not have this field in the Account Assignment tab when the category is "X". How do I add "Fund" into the Account Assignment tab so that it will be visible within ME23N?
Thanks,
Katie

IMG \ MM \ Purchasing \ Account Assignment \ Maintain Account Assignment Categories
Select details for AAC 'X' and view field settings below. Set Funds \ Funds Center to required setting e.g. Display.

Regarding cProject - Tab - Hide

Hi,
I am new to cProject. Plz help me how to hide tabs in cProject.
Regards,
Janani.

Hi Janani,
The Main tabs in cProjects (Projects, Templates, Evaluations..etc) are controlled by customizing "define initial view" which is defined for each cProjects PFCG role.
As mentioned by Matthias the detailed tabs at Project level (resources, accounting, etc) are controlled in customizing "Project Types" & the Badi can be used to control the sub tabs.
Let me know if it helps!
Regards
Sejo

Windows 8.1 IE don't sync tabs, pinned site, password, ecc

I have 4 Windows 8.1 pro where pinned site, tabs, password, ecc don't sync across device.
3 machine are SMB 2011 Essentials domain joined, the other one, a virtual machine, is not a domain joined.
Sometimes the tabs sync but there are old one mixed with a new one.
The first time I joined the domain account with the Microsoft Account the pinned site sync worked but then stopped.
The favorites sometimes sync, sometimes don't.
I'm quite sure the password don't sync.
All the other Windows 8 setting sync.
I have tried to disable/enable all the sync option, reset the personal setting on this site
https://onedrive.live.com/win8personalsettingsprivacy/
delete all the favorites and pinned site.
running the microsoftaccountdiagnostic I found this error on one machine: Live Provider is not initialized properly with the cloud services and Rootcauses found and created logs
I have to say it's the first time I see this error, the last time I run the microsoftaccountdiagnostic there were no issue (only no root causes found and created logs like on the othe Other machine right now).
Hope someone could help me
Thanks

In the last 2 days I did some intensive test.
I found that the desktop don't sync very well.
Looks like the Other machines sync (maybe very slowly but they sync).
On the desktop this morning I found all the favorites, pinned site, tabs, ecc but then stopped.
I found this error in the event viewer
Impossibile creare la notifica del canale WNS di notifica WLRoamingSetting_CollectionInterest (risultato: 0x80070102)
Cannot create channel
WNS notification
alerts WLRoamingSetting_CollectionInterest
As I said before running the MicrosoftAccountDiagnostic I found this error Live Provider is not initialized properly with the cloud services and Rootcauses found and created logs.
Maybe I need to fix those error

Sales data not replicated for materials from ECC

Hello Experts,
When creating a meterial in ECC, the same gets replicated to CRM 7, but the data maintained in the sales tabs of ECC is not getting replicated to the CRM material master Sales & Distribution tab.
I have already maintained the corresponding ECC sales org in CRM sales org, in Tx PPOMA_CRM, and also other attributes.
Thanks in advance,
Vicky

Hi Vicky,
Before trying to download Material from ECC, one has to transfer customizing objects (e.g., Basis Components, Organizational Management (for example, transferred the sales offices), Sales and Distribution (for example, transferred the product groups))
Then one has to map the ECC sales office data with CRM org structure.
Please recheck if you have done all the prerequisite steps to download material in the following help link:
http://help.sap.com/saphelp_crm50/helpdata/en/91/d8fc377cb5be5ae10000009b38f842/frameset.htm
Hope this helps!
Regards,
Chethan

Purchase order creation triggered from APO diferent from one created in ECC

Hi All:
When you check the 'Conv. Ind' against a purchase requisition in /SAPAPO/RRP3 it triggers conversion of PR to a PO in ECC. The problem is, the PO created this way does not have a tax code in the PO item> Invoice tab in ECC. But if I try to convert the same PR to PO using transaction ME21 or ME21N in ECC this field becomes mandatory. Question is , is APO trying to use a different transaction. If so, how do I find out what it is?
Pl help.
Thanks
Ryan

Thanks for your reply Sreeni:
I understand the process of PO creation triggered from APO is automatic. But what is the setup needed to automate it? Is the setup in ECC or APO or both? Where do you setup which PO creation transaction to trigger in ECC to create a PO triggered by APO? Pl. let me know.
Thanks
Ryan

Screen exit for VL01 in ECC 6.0 using badi's

Hi All,
I got a requirement to create a new tab in VL01 transaction where i need to create one field in ECC 6.0.
Can anyone tell me the complete procedure to create a new sub screen and adding it to the existing standard sap screen as a new tab in ECC 6.0 version.
kindly suggest me how to do this using badi's.

Dear Nicole,
a)SE18:
Definition name               ME_PROCESS_PO_CUST
b)SMOD:
Enhancement     MM06E005
EXIT_SAPMM06E_013
-> If you want to use it, use transaction CMOD to create a
project with Enhancement     MM06E005
Best Regards,
Ian Wong

Synchronizing Business Partners for cProjects

Hi all,
We are on cProjects 4.0, ECC 6. We are trying to create Business Partners of the employees via report HR_SYNC_PERSON. The required settings are made for HR Integration in transaction OO_CENTRAL_PERSON.
On running the report, we are getting the following error:
Internal error in IGS1, GB. RFC: Connection error 00000000CP
Message no. GEOCODING004
Diagnosis:
An internal error occurred during geocoding or in a related geocoding program.
Any suggestions on how to rectify this error?
Thanks,
Vivek Pandey

Hi Vivek,
It may be not the best forum to post this issue, even the cProject is involved.
After my brief investigation, the notes 454042 & 934412.should give you some helps at this issue.
If the problem remains, please the component BC-SRV-GEO (geographic function) is the right one, I donot know, which forum it belongs to.
Kind regards,
Zhenbo

Key Differences in ECC 6.0 and 4.6C with respect to SAP SD Module

Dear All,
I would like to know the know the Key Differences in ECC 6.0 and 4.6C with respect to SAP SD Module. I have already gone throught the release notes and
upgrade erp in service.sap.com. I have also checked solution browser.
Its Urgent.
Regards,
Rakesh

Hi Rakesh,
Some of the differences are:
1. Document Flow
In ECC 6.0, The flow of sales documents is seen much better and improved as compared to 4.6C. Once You look at the screen, You will clearly figure out the difference.
2. Sales Order Look and Feel
There are more tabs in ECC 6.0 for Item Level Details.
The Sales Doc. appears as supremely perfect.
3. ECC 6.0 is built on NetWeaver Technology (that possess SOA i.e. service oriented architecture) , Hence more reliable and Improved as compared to previous one.
Hope this will help you. Reward if found useful
Regards,
Gaurav Raghav

CRM BP relationship not visible in tcode BP in ECC

I replicated the Sold to party and created Relationship HAS scn with another partner . The Partner is visible as Partner function in sales area data as partner function but cannot see it in BP tcode in relations tab in ECC.
What we need to do to get this in the BP tcode in Relationships tab for the sold to?

Hi All,
I got teh solution for this.
If you do not have mobile scenario, kindly do the following
customizing settings:
SAP Implementation Guide -> Customer Relationship Management ->
CRM Middleware and Related Components -> Mobile Scenario Setup ->
Activate Mapping Functions.
Here, please uncheck the 'Active' flag for all BUPA_REL and
BUPA_MAIN entries, which are mapped to function module
BP_REL_CRM_TO_CDB.

ECC and GTS integration

Gurus
If using ECC and GTS, what is ususally done with the "Foreign Trade" fields in the ECC? Apparenlty these do not transfer to GTS. This may be confusing to the user to present fields that do nothing. What is the best practice for addressing the Foreign Trade tab in ECC?
Thank you!

Hello,
I am assuming you are talking about the fields that are found in the Delivery documents in the Foreign Trade / Customs Tab.
Actually, these fields are still used. Some of them are transferred to GTS and some do not need to, but are used for Intrastat Reporting. The fields taht are transferred to GTS are the following
In headder its the ones under Handling & Geography. At item Level its the ones in Origin/Destination/Business.
Regards,
Marc

Cprojects and object links to other project phases

Hi experts,
Have anyone of you some ideas how to creating a object link to another phase in another project? Are there possibilites for enhancing the the type of objects link via a BAPI or something in cProjects 4.0?
Thanks, Camilla

Hi Camella,
You can try this in IMG activity
"Make Settings for the Linked SAP Objects". But you need to try copy an existing entry and change relevant tables parameters
I have done this for R/3 Transaction in cProjects 4.0 + ECC 6.0 and Iam sure it will work for Project Phase also
Pls,let me know the version you are trying this feature
regards,
Ramakrishna

Incorrect cost/revenue value show in cProjects

Hi all,
I'm working with cProjects and PS.
The problem is: costing value showed in cProjects is incorrect(its 10 times bigger than that value in PS), however the value showed in PS is correct.
For example:
1 engineer has cost/revenue rate : 10usd/15usd /Hour
He work 10hours for a Task
in PS (ECP, CJ40,..)we will see the cost/revenue is: 100usd/150usd
however in cProjects (Tab: Accounting) we will see the cost/revenue is: 1000/1500
Please help me to solve that problem, it's very urgent.
Thank you very much
Duc Nguyen

HI Duc,
It sounds like a curreny problem with the decimal place, would you please check the customizing item :
SAP NetWeaver -> General Settings -> Currencies -> Set Decimal Places for Currencies
Please check in BOTH systems (cProject & ERP), if there is any difference for the USD?
Kind regards,
Zhenbo

Data transfer form cProject 3.1 to cProject 4.5

Hello Gurus,
I would know how transfer the data from cproject 3.1 to cproject 4.5.
I try to explain better:
I have an ECC 6.0 where I upgrade R3 ( from 4.7 to ECC6.0),
on another server 4.7 there is a cProject , the client would have the cProject ( also 3.1) on
only machine 6.0 ( where there is already R3..).
So
I should install the add on for cproject Suite on ECC 6.0 (tcode saint ) = The client has a new release (4.5) without add charge..
so I should:
1. move customizing ( Delivery Customizing is imported into client 000 and may need to be
copied to other clients. For more information, see Note 337623) ok,
2. BSP ? ( I think to update manually... is there another way?)
finally
3. I should transfer the data : How Can I do ? Is There any way to do this? ( with Saint, the system
allows me transfer the data? )
Thanks in advance
Ciaoo

done

Field Controls in cProjects

Hi,
I am trying to hide or display some fields in cProjects tab of RESOURCES. We want that the Role Type, Role function field and the STAFFING field in the RESOURCE tab to be in DISPLAY status only. Can sombody let me know that which parameter (Object) and Sub object do I need to select and set the status as Display only.
Waiting for your reply @ earliest.
Thanks & Regards,
Gaurav

Hi Gaurav,
0. go to filed control SPRO node in cProjects,
1. select filed control (you can create your custom)
2. select obj category as MTG
3. in "Assign Fields to Field Groups"
For DPR_TS_API_PARTICIPANT Select Role type Select G003
4. Similarly check fro other fields
Niranjan
let me know if it helps
Award if useful

CProjects tab in ECC 6.0

Similar Messages

Maybe you are looking for