CPS-Job - Reply on Console doesn't execute the chosen action

Dear Developers
We have a job chain in which we have as default postcondition "On Error
Action CONSOLE RESTART". Now we have a step on status CONSOLE but a
reply doesn't execute the chosen action. This is not the first time we
experience this behaviour.
Any ideas to solve that problem or any workaround?
Regards,
Stephan Gross, RAIcps
Here our system info:
DB-Version Info:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Productio
NLSRTL Version 10.2.0.4.0 - Production
Redwood-Repository Info:
JCS Object Database,7.0.3.33
JCS Modules,7.0.3
JCS PM4W,7.0.3
JCS Redwood &module Module,7.0.2

Hello Stephan,
7.0.3.33 has a known issue where the reply of console is not always carried out.
If this is the same issue as you are experiencing, then the issue is solved in patch 7.0.3.38.
I would advise you to create an OSS message to have checked if this is indeed the same issue.
Kind regards,
Miek

Similar Messages

Dynamic actions user execute the Hiring action, IT 0105 dynamically adjust

Hello Any body can guid me for the below requirement..
Whenever the user execute the Hiring action (action type: Z1-Hiring cPA) the system should adjust the infotype 0105 dynamically during executing the hiring process, in the same way the subtype (0010 : E-mail )for the userid in SAP HR should be adjusted. The HR Services should not have to do this manually.
The e-mail account can be composed from the fields first name, name prefix and birth name. The fields have to be separated by dots. When the name prefix contains more words they have to be separated by a dot.
When company code is 003 the value email atthe rate xx.comhas to be adjusted at the end.
When company code is 004 the value email atthe rate yy.com has to be adjusted at the end.

Hello Donnie Freako
Thanks for the the information, As i am a HR-ABAP consultent. I am not much femiler on this dynamic actions..
for this case: the DESCRIPTION: In the dynamic module pool ZXXXM000 has to be changed. - so for this where exactly i need to check the transcation, i think its in SE51..
please provide me the steps for the same... and if possible please provide the breaf detaild explination for the below code where exactly i need to place the below, i think we need to place this in T588Z table against fields and values and whatis the meaing of P and I and F and W .. as a technical person i dont know much about this please help me on the same..
P PSPAR-MASSN=u2019Z1u2019
P P0001-BUKRS=u2019003u2019
I INS,0105,0010/D
F Z_003_EMAIL (ZEMAIL)
W P0105-USRID_LONG=RP50D-FIELD1
P P0001-BUKRS=u2019004u2019
I INS,0105,0010/D
F Z_004_EMAIL (ZEMAIL)
W P0105-USRID_LONG=RP50D-FIELD1
clear explination would be appreciated

Any reason why my code isn't executing the "stop" action?

Any reason why my code isn't executing the "stop" action?
sym.getComposition().getStage().getSymbol("_001").$("_002").$("_003").bind('mouseenter',fu nction(e){
e.preventDefault();
$(this).unbind('mouseenter');
sym.getComposition().getStage().getSymbol("_001").$("_002").$("_003").stop("over");
See my file here http://twistedpancreas.com/edge/misc/dropDownNotWorking.zip
The dropdown should change to orange when rolled over, but it's not
Any help is appreciated.

Thanks rhemanthkumar,
so .$ should only be referenced in the last mention of a symbol, all others should be .getSymbol ?

How can I execute the hyperlink action method when I click on the hyperlink

Hi,
I have created a hyperlink (hpPopupXML).
1. I set the Target property to New Window.
2. I set the URL to displayXML.jsp
I ran the application and I click on the hyperLink to execute the hpPopupXML_action() method and it does not.
Is there a way to force execution the hpPopupXML_action() when I click on my hyperLink (hpPopupXML);
Please let me know.
Thanks.

The following excerpt is from http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/about_components.html#action
Simple Page Navigation
If you want the user to click a component to move to a specific page, and you do not want the browser to submit any user input, you can use the Hyperlink, Image Hyperlink, Tab, or Tree Node component and type the path to the destination page in the component's url property, such as /faces/Page1.jsp.
Dynamic Page Navigation
The Page Navigation editor enables you to specify navigation rules that map user actions and decision logic outcome to destination pages. You specify the mapping by dragging a named connector from the link or action component to the destination page. You must also create an action handler for the component that returns the outcome, which is a String value equal to the connector's name. You can use the component's action property to create the action handler.
When a page visitor clicks the component, the browser submits the input, if any, and the action handler returns an outcome. The server looks up the outcome in the navigation rule mapping to determine what page to respond with. If there is no navigation rule for that outcome, the server redisplays the current page. You can write the action handler to return different outcomes based on business logic.
NOTE: When you set both the url and the action property, the action handler takes precedence.
IT LOOKS LIKE IN YOUR CASE THE URL PROPERTY IS TAKING PRECEDENCE OVER THE ACTION PROPERTY. IS THAT TRUE?

BPM console doesn't shows the deployed application in BPM console

Hi Friends,
i developed a BPM process in Jdeveloper and deployed in the weblogic server. Enterprise manager shows that application but in BPM workspace doesn't shows that application to initiate the process form BPM console. any one can you please let me know why the weblogic server shows this peculiar behavior?
Thanks
Hari Mandadapu

Did you create an initiator task with corresponding Task Flow within the BPM Project?
Only when you add an initiator task it will show up in the BPM Workspace.
An initiator task differs from a regular human workflow task.
Otherwise you can only start the process from Enterprise Manager or Webservice Call. Check out if the process show up in Enterprise Manager.
Regards,
Martien

Enterprise Manager Console doesn' t show the correct data

Hi everyone,
we use a oracle 10gR1 rac with two nodes.
we use the oracle enterprise manager console but it does not work all parts of.
And the console is wrong with some parts of the data shows.
for example ;
in the home page, Performans Analysis section shows the date two months earlier. Why ?
(Period Start Time 25.Ara.2010 21:00:59 Period Duration (minutes) 60,02)
other example ;
in the performans tab, host section does not show any data.
why doesn't work this section?
what can i do?
oracle version = 10.1.0.5
OS platform = AIX node1 3 5 00C5116E4C00
thanks.

Hm... could be that your machine is low on RAM for java apps (yours and OEM Console). (You can check resource consumption via perfmon)

Program Doesn't Execute The Code After PrinterJob Is Exectued?

hi all
i have two textfields textfield1,textfield2
and i overrided focuslost for textfield1 to execute a for loop
when i press the button printable_window it shows a frame to be printed
when i press the Print This Window button the PrinterJob is executed,press cancel
and back to the textfield1 and press tab,so the focuslost must be invoked right? but it's not and the for loop won't be executed???
any ideas why this happens?
here's my code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.awt.print.*;
class PrintUIWindow implements Printable, ActionListener {
    JFrame frameToPrint;
    static JFrame f;
    static JButton printable_window;
    public int print(Graphics g, PageFormat pf, int page) throws
                                                        PrinterException {
        if (page > 0) {
            return NO_SUCH_PAGE;
        Graphics2D g2d = (Graphics2D)g;
        g2d.translate(pf.getImageableX(), pf.getImageableY());
        frameToPrint.printAll(g);
        return PAGE_EXISTS;
    public void actionPerformed(ActionEvent e) {
         f.dispose();
         printable_window.setEnabled(true);
         PrinterJob job = PrinterJob.getPrinterJob();
         job.setPrintable(this);
         boolean ok = job.printDialog();
         if (ok) {
             try {
                  job.print();
             } catch (PrinterException ex) {
              /* The job did not successfully complete */
    public PrintUIWindow(JFrame f) {
        frameToPrint = f;
    public static void main(String args[]) {
        UIManager.put("swing.boldMetal", Boolean.FALSE);
        f = new JFrame("Print UI Example");
        f.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
        JFrame f2=new JFrame("Test Frame");
        printable_window=new JButton("printable_window");
        final JTextField textfield1=new JTextField("ID");
        final JTextField textfield2=new JTextField("Password");
        f2.getRootPane().setDefaultButton(printable_window);
        f2.setSize(250,100);
        f2.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f2.setLayout(new FlowLayout());
        f2.add(textfield1);f2.add(textfield2);f2.add(printable_window);
        f2.setLocationRelativeTo(null);
        f2.setVisible(true);
        f.addWindowListener(new WindowAdapter() {
           public void windowClosing(WindowEvent e) {printable_window.setEnabled(true);}
        JTextArea text = new JTextArea(50, 20);
        for (int i=1;i<=50;i++) {
            text.append("Line " + i + "\n");
        JScrollPane pane = new JScrollPane(text);
        pane.setPreferredSize(new Dimension(250,200));
        f.add("Center", pane);
        JButton printButton = new JButton("Print This Window");
        printButton.addActionListener(new PrintUIWindow(f));
        f.add("South", printButton);
        f.pack();
        f.setLocationRelativeTo(null);
        printable_window.addActionListener(new ActionListener(){
        public void actionPerformed(ActionEvent e){
        textfield2.setText("");
        printable_window.setEnabled(false);
        f.setVisible(true);
        textfield1.addFocusListener(new FocusAdapter(){
        public void focusLost(FocusEvent e){
        for(int i=1;i<6;i++)
            System.out.println("Loop"+i);
}

iam_new2 wrote:
any help here?Swing questions should be asked in the [Swing forum|http://forums.sun.com/forum.jspa?forumID=57]
Kaj

HiQ doesn't execute scripts and command line commands

I am running HiQ pro 4.5 on Windows 2000 SP 2. Whenever I enter a command line command, e.g. "1+1", HiQ reports "no error reported" and doesn't execute the command. When I enter the same command again, HiQ tells me that a semicolon is missing.
When I try to execute a script, HiQ reports "Fatal Script error on line -1".
Anybody knows this behaviour and how to get HiQ running normally?

I do have the same problem.

With per-message S/MIME enabled, the default action when replying to an encrypted message is to send that reply unencrypted. Causes users to accidentally send originally encrypted content, back unencrypted.

This seems counter-intuitive, are we doing something wrong or is this working as expected?
When we have per-message S/MIME enabled on an iOS 8 device. Everything works as expected and we have the ability to select when you are sending an email whether that email should be encrypted or not, but i've noticed that, when you receive an email encrypted with your S/MIME cert, read that email on your iOS8 device with per-message S/MIME enabled, and reply to, or forward, that message, the default action is to send that reply, or forward, unencrypted UNLESS you manually re-tap the little padlock button to re-encrypt the message.
This seems broken. I would imagine we would want the default action when replying or forwarding that encrypted message to be an encrypted reply or forward so as to keep the encryption intact. I can't think of a time when you would actually want to send an unencrypted reply to an encrypted message, as doing so would send the originally encrypted content back, as unencrypted text therefore negating the point of ever encrypting it in the first place.
I know we can set the iOS device to by default send ALL email as encrypted, but that's overkill. Our users probably only get 1 or 2 encrypted emails a week, but when they do get those encrypted email we would want their replies and forwards to those email to also remain encrypted, and not open up the chance of one of these users forgetting to re-check the padlock button thus accidentally sending the originally encrypted content, out as an unencrypted message.
Is this working as expected or are we doing something wrong?

Hi,
Thank you for your clarification.
Yes, it seems you have installed all the updates for the Outlook.
“Testing on a good computer” is a method to narrow down whether the cause is related a specific computer.
For debugging tool, I think we can take a look at:
1. RPCTrace log
2. Process Monitor
For RPCTrace log, it’s not that easy to capture. You must firstly replace some Outlook dll files before you can capture the log. Even more, the dll files can vary if the Outlook
SP versions are different. So, It’s recommend to contact a Microsoft Support to capture and analyze the trace log.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Error while executing the Job:Cannot assign NULL to host variable 1

Hello!
I have the following issue:
Error while executing the Job:Cannot assign NULL to host variable 1. setNull() can only be used if the corresponding column is nullable. The statement is "INSERT INTO "VIRSA_... (see log for details)
Note 1362138 - Rule generation - null pointer exception virsa_cc_rtmap doesn't me. After uploading files of ZCC_DOWNLOAD_SAPOBJ and ZCC_DOWNLOAD_DESC I got the same problem during job running...
How can I find out where is the problem?

Hi
That looks like your fields are disabled but they could still be causing the problem edited ( nah - talking rubbish as you've put dummy " " in there) edited - the 'null' error caused many background jobs to fail but, once we had the evidence to show the space (somebody had pressed enter instead of delete/backspace to clear the entry) it stopped the problem - just a bit of learning on the job which we all go through for the GRC chaps in KL.
A " " would be valid but a (I know you can't see it but it's there wouldn't be )
edited.When you did an edit/replace did it say it had replaced anything please?edited
The word doc option does sound good!
Cheers
David
Edited by: David Berry on Nov 4, 2010 7:33 PM

Cannot start job with Management Console

Hi,
The Management Console displays the status of batch jobs started with DI Designer, but when attempting to run a batch job via the Management Console nothing happens.
The execute command displays "Job started successfully", but does nothing.
Any ideas would be appreciated.
Thanks in advance.
Regards,
Meet

Hi Meet,
Do execute the job again from Central Management Console and go to following path
C:\ProgramData\SAP BusinessObjects\Data Services\log
Here in the log folder you will find those many number of folders with job server names as there are job servers in your server.
Go to the respective job server folder(which is used to run your particular job).
In this folder you can find, all the repository folders associated with that job server.
Go to the respective repository in which you have the job.
Here comes the best part.In this repository folder Data services created 6 files for every job execution, which are
ERROR_DATE_NUMBER(.txt,and .idx)
MONITOR_DATE_NUMBER(.txt and .idx)
TRACE_DATE_NUMBER(.txt and .idx)
Open the trace.txt file which has been created recently.(check date and time after running your job).
Now this file will tell you whether the job has been executed, started and stopped due to some error or never executed.
Case1:
If there's a trace.txt file then job had started
Case2:
If it executed successfully then you will find the start and end time stamps in the trace.txt file.
Case3:
If there's an error, open the recent error.txt file, you'll find the error log!!
Hope this will help you. Do update the status of your issue!!
Regards,
Mubashir Hussain

Redwood CPS job goes to status ERROR but job works completes ok in SAP

Hi
When I schedule a particular ABAP job to run in SAP from Redwood CPS it always completes with the Error status in CPS, but the job runs okay and ends in the Finished status in SAP.
I tried a different ABAP job and this ran okay, with the CPS status going to Completed.
I had a look at the CPS log files for the Erroring job and there were no errors in the 'log' file but in the 'step1/spool1' file there is the line 'Processing completed with errors'. Is CPS doing a little more than SAP as regards checking job statuses and looking in the spool file for errors?
Checked the operator messages and all it says is:
Job 1501323 (submitted from ZGB_FI_KO8G_SETTLEMENT copy from 2009/08/24 15:34:54,250 Europe/London)) has aborted due to at least one error while running the jobs in step: Job 1501324 (submitted from ZGB_FI_KO8G_SETTLEMENT copy from 2009/08/24 15:34:54,250 Europe/London))
- doesn't elaborate why the job has status Error.
Is this saying the CPS part had an error or the ABAP part??
Ross

Hi Anton
I checked the Return Code Mapping for this system and it is empty. No post running action or a trigger has been configured.
The first time I was having the error was after setting up a 2 step job chain. When I got the error (and the second step didn't run) I then submitted this first simple step from the job definition SAP_AbapRun in case there was an issue with the way I'd configured the chain; it still errorred though. All I am specifying is the ABAP program name, SAP job name, variant and queue to run on, and it does run okay in SAP.
When you say "The actual error should be available in the logfile of the SAP job itself" do you mean the joblog as viewing in SM37? There are no errors in there.
I'll have a play with the Return Code Mapping part as if CPS does search the spool for errors (perhaps by default?) and sets the status to error in CPS, I don't want it to stop the chain - although I guess I can always set the post action of step 1 to 'on error' 'continue'...
Cheers
Ross

Sound rule doesn't execute properly

I have a rule that announces the arrival of a particular sender's message with three steps: move the message to a folder, play a sound, bounce the Mail icon. In recent weeks, the message arrives, gets moved, and the icon bounces. Sometime later, when I'm doing something with another message (e.g, replying or sending a new one), the sound kicks in. I've tried reordering the rule steps and had added and removed the "Stop evaluating rules" step, but it doesn't make a difference. Another poster thought it might be related to the fact that I'm using custom sounds vs. system sounds (which do execute immediately).
Any thoughts?

"volume: can't open /dev/mixer " is for the users who use OSS so there; you should find out what uses OSS and change it if it is possible and not solely on oss.
and the error I am having is because I defined the specific software to hwd:0,0. so what i should do is to check my softwares and set the audio output to "default"
So in another word use you sound card and in output option of your sound card choose "default over hwd:0,0"

"error executing the process" rebooted there after it doesn't turn on

Hi.
I have an important problem with my Lenovo k900 brought in september 2013. It gave an error like this "error executing the process..." I reboot the phone, but since that moment the phone doesn't turn on.
I have tried a hard reset (power + volume(+)) but it doesn´t work.
When I press the power button, the lights below switch on for a few seconds, but the phone doesn't turn on.

This is a tough problem to solve if your not experienced with fixing Mac's, you can opt to take it to a local PC/Mac tech to solve it or you can attempt things on your own.
If you opt for the local help make sure talk to them if you have backups of your data or not, thus may require data recovery efforts performed first before wiping and installing everything fresh.
Gray, Blue or White screen at boot, w/spinner/progress bar

Error while executing the Job for Objects :null Batch Risk Analysis

Hi All,
We've recently upgraded Virsa to version 5.3_14 . I'm encountering a problem when executing the Batch Risk Analysis job for users, roles and profiles. The job does not complete for some objects and it seems to be sporadic and shows this error: -
Background Job History: job id=395, status=2, message=Error while executing the Job for Object(s) :ABROWN:null
I've attached the log for your review.
Thanks in advance for your help.
Linda Lewis
Feb 9, 2011 1:47:53 PM com.virsa.cc.xsys.meng.ObjAuthMatcher <init>
FINEST: ObjAuthMatcher constructed: 4ms, #singles=2141, #ranges=0, #super=0
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.riskanalysis.AnalysisEngine riskAnalysis
WARNING: Job ID:395 : Failed to run Risk Analysis
java.lang.StringIndexOutOfBoundsException at java.lang.String.substring(String.java:1019)
at com.virsa.cc.xsys.util.RuleLoader.getPermRule(RuleLoader.java:573)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1609)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:321)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchRiskAnalysis(BatchRiskAnalysis.java:1166)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1464)
at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:560)
at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:363)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:375)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:92)
at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:444)
at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1236)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:207)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
FINEST: Lock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock unlock
FINEST: Unlock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchRiskAnalysis
WARNING: Error: while executing BatchRiskAnalysis for JobId=395 and object(s):ABROWN: Skipping error to continue with next object: null Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
2@@Msg is Error while executing the Job for Object(s) :ABROWN:null
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=395, status=2, message=Error while executing the Job for Object(s) :ABROWN:null
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
FINEST: Lock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock unlock
FINEST: Unlock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchRiskAnalysis
INFO: --- BKG User Permission Analysis (System: P20:020) completed --- elapsed time: 4522 ms
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
Edited by: Linda Lewis on Feb 9, 2011 9:08 PM

Hi,
Was a solution found for this error?
Thanks,
Glen

CPS-Job - Reply on Console doesn't execute the chosen action

Similar Messages

Maybe you are looking for