CPU and operating temps when rendering in FInal Cut

I had some issues in Final Cut today, and had to start a project over. I noticed render times seem to have gotten slower. I don't think it's just me, I remember my computer rendering clips much faster than it did after the crash. I also noticed the fans constantly blowing at full bore when rendering. I decided to monitor temperatures during the rendering process. The CPU temperature immediately starts to climb. It averages between 85-89 degrees Celsius during the rendering process. Is this normal for it to get this hot during rendering? I have read many different things.

I'm using FCP 7. It seems like my CPU has been running warm overall at times. I hope things are alright with it.

Similar Messages

  • AE CC 2014 Corrupted and Glitched frames when rendering to Quicktime

    Ever since upgrading to the newest version of After Effects, I've been getting corrupted and glitched frames when rendering videos with a Quicktime holder.  My normal workflow is rendering the video straight out of AE, but it also happens when rendering with Adobe Media Encoder, or even while using the "BG Renderer" script for AE that renders from the terminal.  It happens whether I have multiprocessing enabled or not.
    The corruption differs depending on what codec I'm using, but in the Cineform Codec it shows up as green frames:
    On DNxHD they show up as Red frames (don't have a screencap of this one but you get the idea).
    Using the QT Animation Codec they show up as static or distortion:
    I have not found a codec that does not become corrupted when encased in the QT holder.  Image sequences render out fine, and Cineform with an AVI holder renders out fine.
    Even more strangely, I can fix the problem if I link the AE composition to Premiere, then render the QT file out through Premiere itself.  The fact that Premiere calls and renders the Comp fine but AE does not, makes me think this is a bug in AE's treatment of Quicktime rather then a driver/system incompatibility on my end.  But I'm certainly willing to try any suggestions the community might have for me =]
    Specs:
    Windows 7 64-bit
    AMD Firepro V7800
    AMD Phenom II X6 1090T
    16 GB RAM
    Rendering to a local drive
    Fully Updated AE
    Latest version of Quicktime

    solutions for problems with QuickTime files in After Effects CC (12.0) because of conflict with DVCPROHDVideoOutput Quic…

  • When i opened final cut pro x, EVERYTHING WAS COMPLETELY GONE, i had about 4 years worth of footage and editing what do i do please help!?!?!?!?!?!?!?!

    when i opened final cut pro x, everything was gone.

    so this means that all my work isn't completely gone?
    Your work will still be there, you just have to go through Updating your older pre 10.1. stuff to the new Library model way of doing things.
    Follow Tom's suggestions to the letter and things should go smoothly.
    Al

  • In the past when I have imported my dslr video/audio files and then my zoom audio files Final Cut Pro has organized them in pairs in my library. For some reason my video/audio and my audio are being organized seperately. How do I fix this? Thanks!

    In the past when I have imported my dslr video/audio files and then my zoom audio files Final Cut Pro has organized them in pairs in my library. For some reason my video/audio and my audio are being organized seperately. How do I fix this? Thanks!

    Thank you Russ! Seems as though the timestamp on my audio files was completely incorrect so it placed the files far away from the corresponding video. I've modified the timestamp information and this has helped. The hour/minute information is incorrect but at least now I'm in the ballpark. Thank you!

  • Why do I keep getting a Video rendering error: 10008 when exporting in Final Cut Pro X?

    Why do I keep getting a Video rendering error: 10008 when exporting in Final Cut Pro X?
    I'm using FCPX 10.2
    Yosemite 10.10.3
    MacBook Pro (13-inch, Early 2011)
    2.7 GHz Intel Core i7
    8 GB 1333 MHz DDR3
    500GB with 308GB free

    It appears Apple's latest update has solved the issue. Whew!
    MacBook Pro (13-inch, Early 2011)
    2.7 GHz Intel Core i7
    8 GB 1333 MHz DDR3
    500GB with 308GB free
    Yosemite 10.10.3
    FCPX 10.2

  • When i open final cut pro x  when it starts loding the projects it shows the spining beach ball and is stuck wat can i do?

    when i open final cut pro x  when it starts loding the projects it shows the spining beach ball and is stuck wat can i do?

    Possible  corrupted project or media fies. Here's what I'd suggest.
    First trash preferences. If that doesn't work…
    Move your Final Cut Projects folder into a folder named Hidden Folder. See if FCP then launches. If it doesn't hide your Final Cut Events folder. Once FCP launches successfuly, create a test event and project.
    To track down the problem, successively move load events and projects from hideen to their proper location and open FCP. When and if you get the crash you have hopefully located the problem.
    The easiest way to do this is to purchace Event Manager X ($5).
    Good luck.
    Russ

  • "media server application expectly quit" when submitting from final cut pro

    browsing through the list, it seems the problem couldn´t be solved so far.
    doing some systematic testing, the following riddle shows up:
    ... when adding a QT ref movie (or movie) directly to the compressor batch list and submit to the cluster, everything runs fine.
    ... when exporting from final cut pro:
    menu -> export -> using compressor ...
    submitting in compressor using:
    1) Cluster: this computer: everything keeps running fine.
    2) Cluster: MylovelyCluster ....
    the job fails with the message "Failed: HOST [clusternode_name.local] media server application unexpectedly quit"
    since there is 5TB + of data to be compressed, copying files to the render nodes is not an option. all data is on a shared xraid, connected via giganet.
    Any ideas, any hints appreciated !
    regards,
    p.s. Anybody running an XSAN having the same issues?
    G5s, G4s, G3s, macminis, powerbooks   Mac OS X (10.4.7)   xraid

    ... well, the answer is in other topics.
    showstopper explains it patently again and again ...
    thanks from here.
    shortly: when submitting from FCP, every node HAS to have FCP installed and MUST have access to the same relative file path (mounted shared volume). If the volume is not present, the render node will open the reconnect media dialogue and waits for user input.

  • Audio And Video out of sync in Final Cut, but not in quicktime

    I heave searched the forums to no end to find the solution to this issue, unfortunatley, I have not solved the problem.
    I am using Final Cut 4.5 on a G4 running OSX 10.3.4. This system has worked perfectly for years with no problems. Neither the system, hardware, or software has ever been changed on this machine. Suddenly last week, despite perfect sync while previewing the capture, the Audio and Video were of sync in Final Cut, but when checked in quicktime, there were no problems. That is how I eventually figured out this was a final cut problem.
    By out of sync, I don't mean it is by a specific number of frames that can be adjusted and then everything is fine, the sync seems to drift so that if you edit the audio to be in sync in one part of the video, it won't be at the end. Also, it is out of sync from the first frame played, not a gradual drift.
    This is definitely not an issue of frame rates or final cut settings as will be evident by the steps I took below to find the source of this problem.
    This is what I did to attempt to fix the problem:
    - Check drives using disc utility and repair permissions
    - Remove Final Cut Preferences using Apple guidelines
    - Switch hard drives
    - Delete Final Cut and reinstall newer version of final cut (since the capture files played fine on Final Cut 5.1 on another machine)
    - reinstall entire OSX 10.3.9, wiping the hard drive and reinstalling Final Cut 5.1
    - switch ram slots, and even replace ram with different sticks from another G4 machine
    None of these solutions worked. Is there some hardware problem with my G4 that is suddenly causing Final Cut to play audio and video out of sync?
    Hope you can help, otherwise this otherwise great G4 is going in the dumpster!
    Thanks

    For what it's worth, I'm having what looks to be the same problem. Driving me insane. Here's what's going on-
    Editing in FCP 6.0.2
    QT was just updated to 7.3.1 the other day (hmm)
    On an MacBookPro machine, OS 10.5.1
    Software updater says everything's up to date of course.
    DV-NTSC 24p (23.98) Advanced Pulldown Removal (footage was shot at 24PA on a DVX100b)
    In Quicktime, the file previews fine, everything's in sync, everyone's happy. In FCP, the video and audio are wildly out of sync. I did a test inside of quicktime and sliced out a small portion of the media clip and did a "save as" and this small slice played in sync in FCP. However, this did not work for the entire clip. Clip is weighing in at 5.58GB for a 32 minute run.
    I'm trying to multicam 2 tapes together and manually syncing these up is proving to be difficult at best. When anyone gets any ideas/leads/patches, let us know.
    Grr,
    Nicole
    Editor, RHED Pixel

  • Do I need Final Cut Pro HD when I have Final Cut Studio?

    I will be starting my second project on my new mac and using final cut pro. It will be an instructional DVD. This is my first posting and I guess my first attempt at reaching out (baby steps).
    I will be borrowing an HD camera (some consumer grade). My Question is do I need Final Cut HD when I have Final Cut Studio installed. I notice Final Cut Pro 5.1.4 has HD import and export settings.
    Also, since I have mentioned my project is there any quick reference ideas for a learn to play an instrument DVD, CD or anything.
    And lastly as I wonder off my thread a little. Is this Discussion forum my quickest way of getting an answer, I mean is there anyone who will let me bug them from time to time?
    Thanks
    Mac Pro 1,1 Mac OS X (10.4.9) 2X2 GHz Dual-Core Intel Xeon 1 GB Ram
    Mac Pro 1,1 Mac OS X (10.4.9) 2X2 GHz Dual-Core Intel Xeon 1 GB Ram
    Mac Pro 1,1   Mac OS X (10.4.9)   2X2 GHz Dual-Core Intel Xeon 1 GB Ram

    I will be borrowing an HD camera (some consumer grade).
    Forgot to welcome you to the forum... Welcome.
    Before you jump into this project you may want to do some research. The format you are talking about is HDV, highly compressed and some would say difficult to edit with. A search here on HDV will give you plenty to read and probably point you to some interesting articles.
    Might also consider why you want to shoot HD at all right now since you will most likely be going to Standard Def for distribution.
    You'll find that if you just check in and browse the topics every day or so you'll pick up lots of good information (and probably a few laughs)
    If you're looking for examples for this type of project, just hop down to your local music store. Most have "How To" DVD's for sale.
    Good Luck
    rh

  • Color differences when exporting from Final Cut

    I have a big problem when exporting from Final cut to any file format. The colors and contrast looks fine in Final cut and on my external monitor but when exporting to, for example, H.264 I get a file that is "washed out". Colors are bleak and the over all feel is not what I expect. The funny thing is that if I import the exported file into Final cut it looks fine. What am I doing wrong? Can anyone help me out with this?

    QT brightens the image. Dunno why...perhaps so that it ensures that every monitor can see it?
    Here is an example:
    But I don't know why that is.
    Shane

  • Graphics Card Crashes When I Open Final Cut X

    Never happend before, i started a project for a timelapse video and loaded about 3000 photos into final cut, loaded them to the timeline and 10 seconds later my whole computer restarted. I tryed opening again, right when my project opens, my computer restarts again.
    I have the imac 27" mid 2011, everything updated, i have 16gb ram with about 600gb free harddrive space.
    I know its my graphics card causing the problem for sure knowing by using Pro Maintenance tools. Im using Final Cut X (10.0.6).
    What do i do, im stressting out!!!!!

    If you're certain it is the graphic card then you're only recourse is to have it repaired by Apple or an Authorized shop.
    If you're near an Apple Store then that wil be the quickest solution.

  • When you uninstall final cut pro does your projects delete too

    When you uninstall final cut pro does your projects delete too

    No, only the app is removed.
    The Events and Projects are completely untouched and ready to use when you reinstall or update FCP X.
    To uninstall simply drag the FCP X application icon to the trash and delete it.

  • Electrical clicking noise through speakers when I open Final Cut ???

    Hi,
    When I open Final Cut, as its opening I hear electrical clicking noises coming through my speakers.
    Also when I open Log and Capture I hear several electrical clicking noises.
    This just started within the past few months, I don't know if Leopard had anything to do with it?
    Does anybody have any suggestions?
    Thanks

    When FCP launches, it checks out the pathways for the audio and video... like if you've set it to be connected to a DV camera, it looks for it during boot up. If it doesn't find it, it opens a window warning you it's not there.
    Just open the apple menu's preferences, and change the setting somehow in the audio control panel there. that will reset it.
    The other thing you might try is resetting the PMU or SMU on your machine. These guys reset the power management system wide. Might help, and won't hurt. You need to search the Support area's front page here on "PMU" or SMU to find out how to do this for your particular machine. It's different from one mac to the next... but it's easy to do.
    Jerry

  • I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

    I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

    Hi Shane,
    Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
    I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
    Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
    Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
    Best Rgds.

  • If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?

    If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?

    If you purchase Final Cut Pro X at the Mac App Store, you can install it in all your Macs free of charge as many times as you want. The same applies for all the applications you purchase at the Mac App Store

Maybe you are looking for