CPU Clocks and other MPB questions...

Is there a noticable difference in 2.0 to 2.16?
And is the 17" really that much heavier/bigger?
Can someone recommend a nice shoulder bag?
(I will only be taking it through the house, to cafes, and friends houses)
Thanks!

This is all a judgement call by the individual.
I do not think the 8% clock difference is something you will even notice unless you do very cpu intensive tasks most of the time.
1 lb heavier. It is hardly noticable to me.
Slightly larger. In my work environment the extra inch and a half is not even and issue. I would never notice it. Though it does afford substantially more screen real estate.
Hope this helps.
Kalel

Similar Messages

  • My alarm clock and other apps no longer play any sound. My ringer stills works, so what is causing that?

    My alarm clock and other apps no longer play any sound. Ringer is still working and i can not find any settings that are turning off the sound. What could cause this?

    I know for a fact apple doesn't want carriers fixing their phones. My carrier even warned me that they can't fix the phones only apple stores can fix them. Well guess what I just wasted my whole day by driving to an apple store they "fixed" my phone I got home and it started doing the same **** things they didn't fix **** now I have to waste even more time by finding a ups store to ship my phone to apple so that means I'm going to be out of a phone for over a week because they never fixed it or replaced it like they should have. I'm so upset with apple that if this new phone does the same things were dropping apple and are going to samsung. I wasted 4 hours driving and $40 in gas and 6 hours of my time for nothing. Apple needs to put in more store around the country if their not going to let the carriers fix the phones them selves.

  • Adding a RAID card to help speed up export (and other drive question) in Premiere Pro CC

    First of all, I have read Tweakers Page exporting section because that is where my primary concern is. First my questions, then background and my current and proposed configurations:
    Question 1: Will adding a hardware RAID controller, such as an LSI MegaRAID remove enough burden from the CPU managing parity on my software RAID 5 that the CPU will jump for joy and export faster?
    Question 2: If true to above, then compare thoughts on adding more smaller SSDs for either a one volume RAID 0 or smaller two volume RAID 0 to complement existing HDD RAID 5. That is, I'm thinking of buying four Samsung 850 Pro 128 GB SSDs to put in a four disk volume to handle everything (media/projects, media cache, previews, exports), or split it up into two volumes of two disks each and split the duties, or keep the four disk volume idea and put the previews & exports on my HDD RAID 5 array.
    The 850's are rated at SEQ read/write: 550/470 MB/s thus I could get around 2000/1500 MB/s read write in a four disk RAID 0 or 1/2 that if I split into two volumes to minimize volumes from reading/writing at the same time, if that really matters with these SSDs?
    The Tweaker's page made a few comments. One is splitting duties among different disks, rather than a large efficient RAID may actually slow things down. Since the SSDs are much faster than a single HDD, I'm thinking that is no longer accurate, thus I'm leaning toward the Four disk configuration putting OS & Programs on C drive, Media & Projects on D (HDD RAID 5), Pagefile & Media Cache on SSD (2-disk RAID 0) and Previews &Exports on 2nd SSD RAID 0 (or combine the two RAID 0's and their duties).
    Just trying to get a perspective here, since I haven't purchased anything yet. Any experience/stories, I would appreciate.
    My current drive configuration:
    My D drive is software RAID 5 consisting of four 1 TB Western Digital RE4 (RED) 7200 RPM HDDs with a CrystalDiskMark SEQ Read/Write of 339/252 MB/s.
    The C drive is SSD 500 GB (Samsung 840 (not Pro) and does 531/330 MB/s. My OS, Program Files and Page File are on C, and data/media files/project, etc all are on the RAID drive.
    Problem:
    Current setup allows for smooth editing, only the exporting seems slow, often taking between two and two and a half times the video length to export. Thus a 10 minute video takes 20-30 minutes to export. 15 minute video can take 30-40 minutes to export. The first 10% of the two-pass export takes under a minute (seems fast), but it gets slower where the final 10 or 20% can hang for many minutes like my system is running out of steam. So where is the waste?
    I have enabled hardware acceleration (did the GPU hack since my GPU isn't listed) and it may spike at 25% usage a few times and eat up 600 MB of VRAM (I have 2 GB of VRAM), otherwise it is idle the whole export. The CPU may spike at 50% but it doesn't seem overly busy either.
    Our timeline is simple with two video streams and two audio streams (a little music and mostly voice) with simple transitions (jump cuts or cross dissolves). We sometimes fast color correct, so that might use the GPU? Also, since we film in 1080 60P and export 1080 29.97 frames/sec, I think that is scaling and uses the GPU. I know without the GPU, it does take a lot longer. I have ruled out buying a faster GPU since it doesn't appear to be breaking a sweat. I just need to know if my system is bottlenecked at the hard drive level because I'm using software RAID and my disks are slow and will hardware RAID significantly reduce the CPU load so it can export faster.
    Our files are not huge in nature. Most our clips are several MBs each. Total project files are between 5 GBs and 10 GBs for each video with Windows Media File export being 500 MB to 1.2 GB on average. We shoot using Panasonic camcorders so the original files are AVCHD, I believe (.MTS files?).
    Considerations:
    1. I'm thinking of buying (and future proofing) an LSI Logic MegaRAID 9361-8i that is 12Gb/s SAS and SATA (because some current SSDs can exceed the 6Gb/s standard).
    2. I'm not replacing my current RAID 5 HDDs because not in my budget to upgrade to 6 or more large SSDs. These drives are more important to me for temporary storage because I remove the files once backed up. I don't mind a few inexpensive smaller SSDs if they can make a significant difference for editing and exporting.
    I can only guess my HDD RAID is slow but the CPU is burdened with parity. I would imagine running RAID 10 would not help much.
    My setup:
    my setup:
    CPU - i7-3930K CPU @4.5 GHz
    RAM - G.SKILL Ripjaws Z Series 32GB (4 x 8GB) DDR3 2133 @2000
    Motherboard - ASUS P9X79 WS LGA 2011
    GPU - Gigabyte GeForce GTX 660 OC 2GB (performed the compatibility list hack to enable hardware acceleration).
    C drive - 500 GB Samsung 840 SSD (Windows 7 Pro 64 bit and programs).
    D drive - four 1 TB WD RE4 Enterprise HDDs 7200 RPMs in software RAID 5
    Case - Cooler Master HAF X
    CPU Fan - Cooler Master Hyper 212 EVO with 120 mm fan
    Power Supply - Corsair Pro Series AX 850 Watt 80 Plus Gold
    Optical Drive - Pioneer BDR - 208DBK
    thanks in advance,
    Eric

    ........software RAID 5 off the motherboard ??????......NOT a good idea, from what I have read here on this forum from experts like Harm Millard and others. They have mentioned a LARGE overhead on the CPU doing this....causing sub-par performance. RAID 0 off the motherboard will NOT do this, however.....RAID 0 would provide optimum speed, but, with the risk of total data loss if ANY drive fails. You may wish to reconfigure your RAID to be RAID 0...BUT...you would need to DILIGENTLY back up its entire volume onto perhaps a quality 4TB drive very frequently.
         A lot depends on the nature of your current and FUTURE codecs you plan to edit. You may not want to sink a lot of money into an older setup that may have trouble with more demanding future codecs. For now, in the 1080p realm, your rig should be OK....the read/write performance on your CURRENT RAID 5 setup is not great, and a definite drag on the performance. The rest of your components appear to be fine.....the Samsung SSD, though not ideal, is OK.....it's write speed is WAY lower than the Pro model,but, the drive is used mainly for reading operations. Since you have Windows 7 Pro, and NOT Windows 8.......you CAN put the entire windows page file onto the RAID 0 you might create.....this will take that frequent read/write load OFF the SSD. Read the "tweakers Page" to see how to best TUNE your machine. To use your current setup most efficiently, without investing much money, you would :a. create the RAID 0 off the motherboard, ( putting all media and project files on it )  b. install a quality 7200rpm 4TB HDD to serve as a BACKUP of the RAID array. Then, install a Crucial M550 256GB or larger SSD, ( close in performance to Samsung 850 Pro...much cheaper), to put all previews, cache , and media cache files on....AND to use as " global performance cache" for After Effects...if you use that program. Exporting can be done to ANOTHER Crucial M550 for best speed...or, just to the either the FIRST Crucial or, the 4TB drive. Your current GPU will accelerate exports on any video containing scaling and any GPU accelerated effects. Your CPU is STILL important in SERVING the data to and from the GPU AND for decoding and encoding non-GPU handled video....your high CPU clock speed helps performance there ! You may want to check out possibly overclocking your video card, using MSI Afterburner.or, similar free program. Increasing the "memory clock speed" can RAISE performance and cut export times on GPU effects loaded timelines,or, scaling operations. On my laptop, I export 25% faster doing this. With my NEW  i7 4700 HQ laptop, I export in the range of your CURRENT machine....about 2 to 3 times the length of the original video. PROPERLY SET UP...your desktop machine should BLOW THIS AWAY !!
        Visit the PPBM7 website and test your current setup to possibly identify current bottlenecks,or, performance issues. THEN, RE-TEST it again, after making improvements to your machine to see how it does. Be aware that new codecs are coming (H.265 and HEVC,etc.) which may demand more computer horsepower to edit, as they are even MORE compressed and engineered for "streaming" high quality at a lower bandwidth on the internet. The new Haswell E...with its quad-channel memory, 8 core option, large number of PCI gen. 3 lanes, goes farther in being prepared for 4K and more. Testing by Eric Bowen has shown the newer PPro versions provide MUCH better processing of 4K than older versions.

  • Posible p4n diamond heat problem and other beep question

    Hi   was using my p4n diamond for about 2h 30min and it all of a sudden just cuts out with no warning.
    im unsure if its heat related thought the constant 55C is not as good temp as i should probably have but it stays stable there.
    Also when i recently installed msi core it said i was very close to the voltages it had in the display just to hope to rule out power problems.
    i have the cases 120mm exaust fan in the back an 80mm input fan in thefront and then the cpu fan that came with my pentium d 830 .
    if its heat related should i get another 80mm fan as an exaust or an 80 mm input fan. i have one more spot on the door of the case.
    ----other beep question--
    I was also wondering about the beeps on my computer. when i first was working with this pcc i had no beeps but then when working i had one beep  before os   then two after os and usb case plugs and floppy , 3 when i put on a printer and then back to one and then no  beeps.
    are these my beeps going down related to my heat or is this mother board short lived . one beeps soposed to mean that its loading properly
    thanks
     

    regarding your question about target temperature. my board isn't exactly the same as yours, but it's close.
    you are right that you can lower the target temp and it will tend to cool the cpu because the fan runs faster at a lower temperature. the way i set up mine was to DISABLE the target temp and that gives the fan full voltage at all temps. that way, the fan rpm will bottom out at 2250rpm (instead of 1100rpm up to the target temp) or so even at lower temps.
    also keep in mind that your cpu temp in the bios disply should be a few degrees HIGHER than the temp in "idle windows".
    the intel data sheet for the pentium D 8xx series says that the max temp is 69C. so your cpu shouldnt have a problem at 55C.
    i ran a prime95 primality test for about 17 hours at 60C to test stability (while using the computer for my normal foreground tasks) and didn't have a problem. i'm NOT recommending this. but i wanted you to know that this cpu doesn't have a problem with temps in the 60C range. and that msi motherboard will stand up to rough treatment.
    also, in my humble opinion, i would NEVER run those msi windows utilities. they may be causing you a problem with stability. i use speedfan from almico to monitor temps and i have it set up to generate sound and visual warnings at certain temps. the F1 docs are good. if it were my system, i would go so far as to reinstall windows and format the C: to get rid of core center. i wouldn't even trust the uninstall unless you're good enough to surgically remove it manually.
    also make sure you turn off EIST in the bios. it wont impact your temps significantly. that nvidia nforce sli intel edition has a problem with 14x multiplier and pentiumD. and EIST bumps you down to 14x occaisionally.

  • Leopard, gcc 3.3 and other bizarre questions...

    Hi all.
    I'm currently trying to install amarok music player onto Mac OS X 10.5.2,
    I've already done so on an identical hardware configuration, under Mac OS X 10.4.x, and after a few compiling errors, and unmet dependencies, managed pretty well I thought.
    This time my problem(s) is(are) different.
    I've user what the amarok wiki ( http://amarok.kde.org/wiki/OnOSX ) describes as the "Amarok via Fink in complete" method, which is to say install fink, hit fink install amarok, and hope for the best... Having pushed through a few bits and pieces here and there, amarok is now compiled and installed.
    But I get this strange error message when launching amarok, which then subsequently and very rapidly crashes :
    [start code]
    dyld: lazy symbol binding failed: Symbol not found: dscaler_greedyh_getmethod
    Referenced from: /sw/lib/xine/plugins/1.1.10/post/xineplugposttvtime.0.0.0.so
    Expected in: dynamic lookup
    dyld: Symbol not found: dscaler_greedyh_getmethod
    Referenced from: /sw/lib/xine/plugins/1.1.10/post/xineplugposttvtime.0.0.0.so
    Expected in: dynamic lookup
    [end code]
    (I don't think the entire amarok debug output is relevant, it's just version 1.4.8 and the rest seems pretty standard to me, do please ask if you want the full gdb output though)
    After looking up the dyld errors I found this :
    http://naranja.umh.es/~atg/blog/archives/2007/01/entry_0.html
    (quite old I know, but sound and the closest I found to my error)
    which lead me to believe I should have compiled amarok, and for that matter libxine1 (which I compiled myself with the --with-external-ffmpeg flag because fink wouldn't do so...), with gcc set to version 3.3 (should I?)
    I then discovered that gcc_select didn't exist in Mac OS X 10.5, nicked it of a 10.4, removed and tweaked it until everything worked fine on the 10.5 with gcc 3.3 (I compiled a test.c with no problem), and tried again... with no luck. I couldn't get xine, nor amarok to compile.
    So my questions are these (after that lengthly introduction, bear with me please :
    -firstly (or miraculously...) does anyone recognize or understand those errors amarok is giving out?
    -secondly can someone please explain the situation with Mac OS X 10.5 and gcc versions <=4.0 'cos I'm really out of the picture here ?!
    Thanks a lot in advance for any help, and sorry for the long post, I figure it's always best for folks to have an overall picture of things...
    Kind regards,
    Mark.
    Message was edited by: Marcool

    I quote :
    Re: Mac OS X 10.5 ? gcc 3.3 ? and other strange happenings
    From: Benjamin Reed ([email protected])
    Sent: Mon 24/03/08 15:51
    To: Mark COLLINS ([email protected])
    On Mon, Mar 24, 2008 at 6:01 AM, Mark COLLINS <[email protected]> wrote:
    start code
    dyld: lazy symbol binding failed: Symbol not found:
    dscaler_greedyh_getmethod
    Referenced from:
    /sw/lib/xine/plugins/1.1.10/post/xineplugposttvtime.0.0.0.so
    Expected in: dynamic lookup
    dyld: Symbol not found: dscaler_greedyh_getmethod
    Referenced from:
    /sw/lib/xine/plugins/1.1.10/post/xineplugposttvtime.0.0.0.so
    Expected in: dynamic lookup
    end code
    I'm sorry, I can't really help with xine issues, you'll have to
    contact the xine maintainer.
    As for getting amarok 1.4.x, if you want 1.4.8, I've already got
    amarok 1.4.8 in fink unstable, your best bet is to not try to build it
    by hand, and instead get it there...
    -firstly (or miraculously...) do you recognize or understand those errors
    amarok is giving out?
    I recognize them as an issue with xine, but I don't know where the
    errors come from.
    -secondly can you explain the situation with Mac OS X 10.5 and gcc versions
    <=4.0 'cos I'm really out of the picture here ?!</div>
    gcc 3.3 does not exist on any of the intel platforms, except for
    compiling backwards-compatible powerpc code. The first apple gcc that
    supports x86 Mac OS X is gcc 4.0. You can't gcc_select it, if there
    is something that supposedly requires 3.3, it won't work on 10.4 or
    10.5, on an intel box, except building a complete powerpc application
    and running it under rosetta.
    Benjamin Reed a.k.a. Ranger Rick
    Fink, KDE, and Mac OS X development
    http://www.racoonfink.com/
    So thanks a lot Benjamin, that solves that, no way to run gcc 3.3 on Intel Mac OS X 10.5, and the errors I'm encountering are from xine.
    I guess I'll be chasing up the xine maintainer now!
    Thanks all for you help guys, and see ya' !
    Regards,
    Mark.

  • How does Smartware handle backing up two drives to My Cloud...and other Smartware questions

    When you set up backup from two disk drives on one PC to My Cloud via Smartware, do they both backup simultaneously, or do I need to do one, then the other? I have a Windows 8.1 laptop with two hard drives, one is 500GB, the other 1 TB. After installing My Cloud (3TB) and Smartware, I went into Smartware and set up my backups. I selected various folders on each drive to back up, and I also set up two different folders on My Cloud to receive these files. Setup is like this: PC Drive ->                                 My Cloud FolderSeveral folders in G: drive ->    Pictures, Video folder on My CloudDesktop and User folder onmain drive                           ->     Users folder on My Cloud Every time I open my PC at home, I start Smartware, click the Backup tab and let the backup continue. I feel like I need to manually go into the Home and Backup tab for each backup plan (one per drive) and restart it. Regardless, my question is this: is Smartware able to handle these two drives on my laptop backing up onto My CLoud? Other Smartware questions:- Does my PC have to be on my home network (where My Cloud is installed) in order to run Smartware? Can I be on the internet outside of my home and run Smartware?- I run Outlook 2010. Will Smartware back up the latest Outlook file automatically as new files are created (basically, every time I run Outlook)? Much appreciated. - Paul M.

     
    Hello,
    When you set up backup from two disk drives on one PC to My Cloud via Smartware, do they both backup simultaneously, or do I need to do one, then the other?
    You will need to do one first and then the other and the last one that is selected will be done automatically.
    - Does my PC have to be on my home network (where My Cloud is installed) in order to run Smartware?
    Yes.
    Can I be on the internet outside of my home and run Smartware?
    WD Smartware does not perform remote backups. 
     

  • CS5: CUDA, CPU and other hardware questions

    CS5 can gain much speed with CUDA technology by Nvidia; I assume everybody who researched a bit knows this.
    However, I like very exact information to get the best decision for a new investment.
    I need to get two identical new CS5 systems, that are much faster and not as buggy as my last CS4 system.
    I have about 30.000 euro for 2 machines.
    Our studio demands SDI connections, so I got a Matrox Axio.
    Currently my system has lots of problems with Premiere and After Effects:
    - Field swaps
    - Inconsistent effect parameters
    - Very slow rendering
    - Very slow app startups
    - Multi task slowdowns
    - Crashes of apps
    - Very slow interface operations
    1. Does CS5 only use the CUDA of supported CUDA Cards?
    2. Does SLI or multi graphic card tech, help CS5 speed at all?
    3. Is it useful to get a Tesla next to a Quadro 5800 or is it not seen by CS5?
    4. What Intel processor is best suited for After Effects rendering: iX or Xeon architecture?
    5. Does Adobe really use only 3 Gb per core, meaning you should not buy more than 3Gb per CPU core? Or is it per THREAD and should I get more RAM?
    6. Speed or number: Is it better to focus on very high total core speed, or to optimal RAM distribution by getting as many cores as possible?
    7. Can a Matrox MXO2 Rack unit, cooperate with the Nvidia CUDA power or could both accelerations/technologies hinder eachother?
    8. Is it best to get Nvidia SDI connectivity or is there a save alternative?
    9. Can iX CPU's be dual or is that a Xeon option only?
    10. What is the fastest 6 core Xeon that can be dual?
    11. Does CS5 need a good scratch disk: is it wise to get a SSD just for scratch or is it overkill?
    12. Some say the Nvidia 5800 is not the fastest card around; it has 240 cuda cores and some gtx cards have far more than that. What is the story?
    I probably forgot about 324 other questions, but for now these will do.
    If any of you can give objective and confirmed information, please do!

    "I have about 30.000 euro for 2 machines."  That's about  $38,772.00 USD!!  Oh what I could build with that money!  I.M.O, I would seriously look for a way around using Matrox video products.  We began using the Matrox RT.X100 back in 2003 with Premiere 6.5.  On a good day, we could edit all day with only one crash.  The RT.X100 introduced serious problems to our workflow like corrupted project files and timelines that would export finished "show master" videos that contained errors like areas that freeze frame for 10 seconds.
    Here is a link in the Adobe Hardware Forum to the two systems I recently built for the company I work for.  Both systems cost roughly the equivalent of  2,725 EUR. That's not each, but for both systems:
    Our Two Rock-Solid Editing Systems
    The X-58 motherboards will accept the new 6 core intel i7 980x processors, you could go with 4GB sticks of RAM for a total per system of 24 and pop in a couple of Nvidia 285 GTX's for MPE acceleration.  You should go with Harm's recommendation for Raid setup.  For input and output connections, I'm thinking that someone makes a non-invasive solution.  Take a look at products like the DeckLink HD Extreme 3D.  I really don't know if this product is compatible with CS5 and the Mercury Playback Engine.  I would do a little research on that.

  • How does the Java card simulator work? and other misc questions

    First, I have a class inherited from Applet. Okay, I did that.
    How do I convert this class to a CAP file? I mean I have a class file which is compiled by javac, do I use this file to convert into a CAP file? What is an AID? Do I make up this AID?
    In this .scr file (APDU Script), I understand the first 4 bytes, it means to create an Applet, but what about the rest? I know there are some intermixes of lengths and AIDs, I just can't decipher this.
    // create wallet applet
    0x80 0xB8 0x00 0x00 0x14 0x0a 0xa0 0x0 0x0 0x0 0x62 0x3 0x1 0xc 0x6 0x1 0x08 0 0 0x05 0x01 0x02 0x03 0x04 0x05 0x7F;
    And here comes the main question?
    How does the simulator work? How do I generate the data that mimics what the card reader reads?
    Thanks
    Jack

    At first blush,
    I have these when executing the RMIPurse sample according to the user guide
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported type long of field interfaceHash.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type long of method dispatch.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.SkeletonMismatchException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported type long of field interfaceHash.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported type long of field serialVersionUID.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode pop in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode pop in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of method class$.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method forName(java.lang.String) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported return type String of invoked method getMessage() of class java.lang.Throwable.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.lang.NoClassDefFoundError.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.At the first command prompt, I typed cref -o demoee
    and at the next command prompt, I typed ant all, and I got those error messages.
    Thanks, you are so nice to help :)
    Jack

  • How do I add a Handwritten Signature to my form? And other Form Questions

    Hi there,
    I'm making a form for parents who's kids are going to drive a motorcycle for the first time.
    Now I want to use my laptop with touchscreen for people to fill it in.
    the normal boxes (name, adres etc) with keyboard.
    But the important part is the SIGNATURE which has to be handwritten.
    It's for insurance and legal autorisation from the parents that the kid is allowed to drive and they know the risks and rules.
    How do I add a box in which parents can sign.
    Or is there another solution to make it legal?
    Another question now I might have someones attention:
    After a parent is done filling the form and presses OK or DONE
    Is there a way a parent can choose to use a new blank form or the same form again without date of birth/name/sex
    so he/she can fill the forms faster for the rest of the kids?
    OR
    Is it possible to let a parents say I have 4 kids (with a choice menu)
    and the parent wil get 4 name/age/sex openings and the rest of the form will stay the same?
    And
    Is it possible to export the whole bunch into a excel for easy usage
    Thanks in advance
    and all tips are welcome!
    Love
    Kim

    Just to share some info for this:
    I used to do this sort of thing quite a bit.  What I used was a scanner to scan my hand written signature to an image file.  I would then paste the image file, which supported transparency, over the signature line.  More recently, I used Photoshop to draw a signature saving in a transparent image file.
    Just to warn you though:  you are asking for legal advice, and you are not going to get that here.  I would consult with an attorney to find out exactly what is legal.

  • Aperture with Scanner and other related questions

    One month ago I've purchased an iMac 24", and I'm planning to buy Aperture.
    If some one can help me, I have these Questions:
    1.- Can I scann from Aperture importing from my Scanner Epson Perfection 3170 and put the pics on the Aperture Gallery?
    2.- Which file format TIFF, DNG?
    3.- Why use VAULT if I have an external HD and I use Time Machine
    4.- It make sense use Photoshop Elements if I buy Aperture?
    5.- Can I import on Aperture the keywords I've created on BRIDGE?
    Thank you
    Best regards
    Luis

    Hi. Point three the vault backup is aperture just being safe, yes the time machine is great and will work trust me. If god forbid there is a small fire from a power pack etc you can loose the pc and backup drive this is the point of the vault make another backup keep the drive at work for safety simple. The vault is great for making incremental backup very fast. Point 4 elements works a treat with aperture you can set it as external editor if you need too, the pair complement each other and the best thing elements is cheep now.

  • Hpe540f and moving to a bigger case and other minor questions

    ok, so the thing is, is that since I've gotten my hpe540f (or VERY similar computer in the same line), I've been slowly improving the computer by adding a better graphics card and a better PSU (550ti and a 600 watt psu if you must know) and the case has started to get a bit cramped and the temperatures in the case are at a semi-alarming rate and I've tried different methods to lower the temperatures (cleaning/dusting and wire arranging), but I eventually deduced that it was the airflow of the case, so this is where my questions come in...
    I've never really messed with a pre-built computer before and I just need to know that if you really can move to another case and whatnot easily (sounds like a silly question, but I've never had to move entire components to another case before and previous computers I had were built my dad or the both of us)
    I've also had my eye on a certain case which seems to be bigger than my current case and is a bit on the cheap side, but has gotten good reviews and is made for gaming (which I intend to do a lot of or use most in my computer) I just would like to know if this computer case would work with the components I currently have and will last me...if not then by all means if you have any other suggestions on cases I could get, that would be great too
    Below I'm going to link the product pages for the case and another page that seems to list most everything about my current computer minus the upgrades I've made over the years (but I listed them above and they aren't too significant that I doubt it would matter)
    http://h10010.www1.hp.com/wwpc/ca/en/ho/WF06b/12454-12454-3329740-64546-64546-5035344-5068325.html?d...
    http://www.newegg.com/Product/Product.aspx?Item=N82E16811147153

    Hi,
    The issues that you will run into when transfering the existing "guts" of your PC to a new case are:
    Motherboard mounting --> many cases should be able to accomodate most of the mounting holes
    Rear I/O plate -- you need to remove this and transfer it to the new case as one is not included
    USB header connectors -- make sure that the new case can handle the USB motherboard connectors
    Front panel connections
    The case for the HPE-540f appears to have slotted air intake vents at the top so the PSU should be mounted fan up so it can draw cool air from the upper side vents.  Double check this as a possiblity on how to reduce heat.  Additional cooling ideas: PCI slot cooling fan and vented PCI slot covers.
    My HP e9280t appears to have the same case. I am running a much higher wattge video card, higher wattage power supply, higher wattage processor, more memory dimms and three hard drives.  The point here is that I am not experiencing heat issues. 
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • White balance presets and other random questions

    Hi,
    I'm new to aperture and I had a few questions:
    1) Is there a white balance preset, i.e. daylight, shade etc, or do you manually have to dial these numbers in each time?
    2) Is there another color meter aside from the loupe? Something that I can leave on the same spot in the image while I'm trying to correct color?
    3) I have roughly 5000 nef images on a second hard drive on my G5, is there a way to keep the library external (like Lightroom), or do I have to reimport all of these images in to aperture's library?
    4) Where does the image library like to live – where will it be fastest? Should it be on the startup drive, or is there a speed advantage to putting it on a secondary drive (like photoshop)?
    Cheers,
    G5 Dual 2.0g   Mac OS X (10.4.3)   macbook pro 2.0g

    Hi Ned(bot?),
    1) Unfortunately, no. You have to dial these in each time. If you dial it in for one image you can lift and stamp to others, but it's a bit hit or miss.
    2) The color meter is always active -- check near the histogram, it shows the RGB and L values for each pixel... this has been since 1.1.
    3) You must import the images into Aperture's library. Note Aperture can have multiple libraries... the only thing is to switch between them you need to make a preference change and re-launch Aperture. For the photos to be accessible from other applications, while inside Aperture's library, you can either make a smart folder which exposes them from the Finder, or you can use a tool like iView Media Pro which can peer inside Aperture's library (which is really just a folder).
    4) On a desktop machine, the library will be fastest on the internal drive. On a laptop -- it depends... A Firewire 800 connection to a 7200 RPM disk will be faster than an internal 4200 or 5400 RPM drive... a Firewire 400 connection may be slower. Does your MBP have a 5400 or 7200 RPM internal drive? The latter is better, but the difference won't be colossal.

  • GPU/CPU Temps and Graphics Performance Questions

    I am also experiencing some similar oddities with my 15in UMBP. As background on my setup I am running 10.5.7 (the problem began before the update) and I work in an air-conditioned office with a cooling pad for my frequently "toasty" MBP. I have noticed that my temps are significantly higher while running on the NVIDIA 9600M GT vs. the 9400M, and also I use iStat to monitor my system.
    Here's the problems. With only Mail, iChat, Safari 4, and iTunes running (87-93% idle) I frequently see temps hit 150-155 F for the GPU 145-150 F for the CPU. While running on the 9400 with the same applications (87-92% idle) I see temps from 90-95 F for both GPU and CPU. When I had first gotten my MBP I used it mostly with Aperture 2 and I thought it was strange that I couldn't tell the difference in performance between the 9600 and the 9400. Later I tried to use it from time to time in Win XP (bootcamp) for gaming, but it would get so hot that i could hardly touch the keyboard and the graphics performance wasn't nearly what i thought it should be. In fact I was only able to run games slightly better than on my company provided Dell Inspiron D620 (old POS). On the Mac side I tried to test out the performance of my GPU by setting the graphics in X-plane just to the point that with the 9600M GT enabled the program wouldn't tell me that I had too many graphics options turned on. After getting that dialed in I switched over to try it with the 9400 and the performance was nearly identical, and maybe even a little better... I'm not a genius when it comes to computers by any means. I don't know very much about what kind of performance I should be seeing from these two cards, but I would think that the 9600 would greatly out perform the 9400.
    Any feedback or advice would be greatly appreciated

    I used istat pro to get the temperatures and fan speeds. You can download it free here:
    http://www.apple.com/downloads/dashboard/status/istatpro.html
    I turned it on a few hours ago and the temperature of one of the cores reached 70 degrees C and the fan speeds all went up to around 3000 rpm. I'm just going to leave it off for now and take it in to get serviced. Only problem is I have to make an appointment and who knows how long it will take to get it in. Hope it works out for you.
    Kyle

  • Scratch disk and other setup questions

    Hello, I am a long time Premiere user but have never been involved with the setup. I have decided to start doing personal video editing on my gaming computer and have run into some questions.
    The biggest one I have is with the scratch disk setup. I've read the help doc about 10 times and googled every combination of terms I can think of but am still unsure how I should set these for my setup.
    I have Premiere Pro CS5 installed on my C:, which is a 128 GB SSD
    For storage I have 4 1TB drives in Raid 5, so 2.72 TB total storage.
    How do I want to set up my scratch disks for best possible performance?
    Question 2: This might be related to scratch disk setup, I'm not sure, but something I have always wondered. Which disk should I save my projects to in this configuration? Does it matter? Then, do I want to render my final video to that same folder or to another disk?
    Question 3: I currently have a GTX 460 graphics card and am enjoying the benefits of CUDA acceleration. I have been looking at adding a second in SLI for gaming purposes, but have read that the Mercury Playback Engine is not compatible with SLI. Does this mean that it will still just work with one card and I will see no benefit in premiere, or that all CUDA acceration will cease?
    Thanks guys, I really appreciate the help.

    Alright, so I have the hdd's in the case and am setting up where to place everything, but each of my drives is different, so I am hoping someone can suggest best practice on which drives should hold what. I can rearrange any drive to suit any purpose you guys would suggest, but here is what I currently have set up:
    C: - 128 GB SATA III SSD
    D: - 150 GB 10k VelociRaptor
    E: - 250 GB Caviar Black
    F: - 4x 1 TB Spinpoint F4 7200 RPM in RAID 5
    Here is how I am currently planning on using these drives:
    C: - OS, Programs
    D: - Media, Projects
    E: - Previews, Exports
    F: - Pagefile, Media Cache
    When I am finished with a project I move the exported file onto my media server, so that is why I set the export onto the smaller drive and media cache onto the RAID.
    Does this look good or would you guys suggest a different orientation for better performance?
    And one other question, this time regarding RAM. I currently have 6 GB of DDR3, 3 x 2 GB. I have been reading all about how moving up to 24 GB would be very beneficial, and since it really isn't all that expensive, I am planning on doing so. My question is that, I have watched the task manager while rendering and exporting my videos and I've only ever seen RAM usage hit 1.8 GB. I wondered why it didn't get close to using all 6, but didn't worry about it too much. But now that I am hearing 24 would be helpful, I am wondering if I have something set up wrong that is stopping Premiere from using all my RAM?
    Thank you guys so much for the help.

  • How can I transfer "notes" from one icloud account to another, and other account questions

    Hey,
    I currently have 2 icloud accounts. (In total I have 4 seperate apple ids somehow, 1 @me.com, 1 @icloud.com, 1 @gmail.com, and 1 apple id. But that's a problem I'll talk about later).
    Right now, all of my notes got deleted from my iphone, but they are on the icloud account A: (@me.com account's icloud.) When I reconnect this account to my iphone, the notes are there. However, when I turn off note syncing in my iphone's icloud settings, I'm not prompted to "keep data on iphone" (like I am prompted with contacts). Instead, they are just deleted from the iphone. So there's no way to connect the icloud account A, download the data, and reconnect icloud account B.
    How can I get these notes from icloud account A to icloud account B (or just getting it from icloud account A to my iphone.)
    And while I'm at it, how can I get the @icloud account that was linked with the @me.com account to get linked to the @gmail.com account.
    Sorry if this is confusing.

    Let me rephrase my comment...  I used Windows to sync my data without icloud, we decided to switch to mac and purchased a $2000 osx driven machine only to find out apple has "secretly" disabled mobile sync services and replaced it with icloud syncing.  There was NO documentation stating this fact before my purchase, it was only realized when users started running into syncing issues that apple disclosed mavericks no longers uses mobile syncing services and "requires you to use icloud to sync device information" on this forum.
    They removed a integral part of my privacy without telling me, or warning me, before i spent money on non-refundable merchandice.
    These are not mindless, I was forced into mavericks when i purchased a new mac... All other versions of OSX provide modile syncing services.
    And I was not threatening lawsuit, i was stating a thought that this leavs apple open to a lawsuit for people who want their data kept private, they are FORCING the use of icloud now.

Maybe you are looking for