Cpu cooler control

Just finished assembling barton 2500 based system using another brand mobo which got me thinking Man, this is one very quiet system!
How can I mod a k7t266pro2 xp1700 based system with a variable speed CPU cooler fan?
Any ideas
Thanks in advance

... or you can hook up the existing cpu fan to one of such devices:
http://www.coolermaster.com/?LT=english&Language_s=2&url_place=product_list&p_class=21
http://www.coolermaster.com/?LT=english&Language_s=2&url_place=product_list&p_class=21

Similar Messages

How to enable cpu fan control and monitor

Just had this new budget PC build:
MSI FM2-A55M-E33 Bundkort micro-ATX Socket FM FM2-A55M-E33
AMD A serie A4-5300 3.4 GHz 2 cores 2 tråde 1 AD5300OKHJBOX
G.Skill ARES Hukommelse 8 GB : 2 x 4 GB DIMM F3-1600C9D-8GAO
Linkworld Mini LC727-10 Black Piano 550W 727-10-C2128 It
Windows 8 Licens og medie 1 PC OEM DVD 64-bit WN7-00401
ZALMAN CNPS 5X Performa Processor-køler CNPS5X PERFORMA
Samsung 840 Series MZ-7TD120 Solid state driv MZ-7TD120BW
Samsung SH-224BB Disk drev DVD±RW (±R DL) / D SH-224BB/BEBE
OS: win 8,64bit
Thing is i dont know how to enable CPU fan control/regulation ifd possible. Doesn't realy see anything anything in the mobo manual except mentioning AMD Cool’n’Quiet.
This fan i have installed is running fine but i thk it runs full speed all the time and that makes a lot of noise - not needed.
Thx for any advice/tip/hint

40 °C is fine. The minimum fan speed can be set is a % of the full capacity.
Start with 12.5% and if the fan needs to adjusts it's fan speed too often and it get's annoying you can raise it to 25% or more.

CPU Cooler Recommendation

Hi,
I'm looking for recommendations for a decent CPU cooler. Price isn't really an issue.
I recently bought the ASUS Star Ice CPU cooler, couldn't get my MB to work and then broke the fan while fumbling around with it. So don't recommend that one, it maybe good but I don't like it anymore. I also want a CPU cooler that I just can connect to the MB connector and have SpeedFan control its fan, not some external knob etc. It also shouldn't be too heavy. A little above intel specs is OK but not too much.
Looking forward for recommendations.
thanX
Uso

The zalman sink is really quite beyond belief. Get this: at idle and moderate load it keeps my Northwood cool enough with the fan turned off. I found this out quite by accident one day when I noticed my idle temps were about five degrees higher than they ought to be. I figured something was running in the background and spent ten minutes trying to figure out what spyware or virus was secretly using my CPU cycles before I noticed that the CPU fan read 0 RPM. I'd accidentally pulled the wire out while working inside the case. I'm sure this would have fallen short had I pulled up anything really demanding, but I was pretty impressed The downside, however, is that the fan, even at full power, doesn't seem to take full advantage of the sink. I've been obsessed with lowering my temps lately, so I dug out an old p4 stock cooler, cannibalized it, and mounted the fan such that it blows across the sink, i.e. perpendicular to the sink fan such that it's blowing directly toward my exhaust fans. I haven't stressed tested it yet, but my idle temps dropped by something ridiculous like six degrees. As in, my CPU now idles 2-3 degrees cooler than my case. Hence, it's pretty clear to me that the fan just isn't moving enough air to take advantage of the sink's thermal properties. And trust me when I say that the problem is not the amount of air moving through my case: the thing practically hovers. I'm not sure whether the zalman fan can be replaced (I intend to check the next time I have good reason to remove it); if so, mounting one of those 92 mm chop-your-finger-off thermalake (sp?) tornado fans on it would basically do the trick. I appreciate the quiet cooling concept, but I see every extra decibel as added time between me and the moment when something blows up

CPU Cooler for 870A-G54

Ok I need a CPU cooler that won't block a RAM slot. I have an Arctic Cooler 7 currently but it is so wide and short that it blocks my first RAM slot.
I am not oc'ing but I don't think the stock cooler that came with my Phenom II X2 is sufficient with the other 2 cores unlocked.
Anyone currently using something that won't block that slot?
Thanks in advance!

Quote from: Fredrik on 01-March-11, 09:59:18
A inch off: wlahdone, much dust gathered in front of the processor fan, on the graphics card, tells me you can improve on the air flow. Two ideas:
- A stronger exhaust fan.
- An air filter of some kind for the intake fan, or turn it off completely.
- A tower processor fan that directs dust towards the exhaust fan.
Yes there is some dust on the HAWK That has accumulated since i ve bought it, high quality ~1 year dust
I usually clean the video card on the other area Don t want to disturb something with static as it works.
For already 2 months i ve replaced the case with a Nexus Clodius and indeed i may put the front fan to the mobo and set it at a lower speed (as the included controler sets them both in same time) ,to create that required air pressure.
And the case alows me to put one on the top of the case as well.I usually use a Cooler Master TX2 for the CPU and that one does send the air to the exhaust one.
It s a little off topic and i m sorry ,but Fredrik provoked me

Green Power CPU Phase Control + C-STATE + Turbo Boost ?

Does anyone know if we can turn on MSI's Green Power CPU Phase Control + Intel C-STATE + Intel Turbo Boost in BIOS all at the same time? Any problems with doing this? Does MSI's Green Power CPU Phase Control override or conflict with Intel's C-STATE? And will Turbo Boost kick in if turned on when a core needs it even if Green Power CPU Phase Control and C-STATE are switched on?
I really like the idea of the PC running cool and quiet when doing lite work, but would like full power on demand as well.
Thanks.

I'm using Intel speedstep (EIST) but i disabled c-state because this brings a unstable PC for me.
I'm using also the greenpower genie and it works very well.
When i don't need the power my PC falls back to 50% 2154MHz (this you can choose in the energy configuration of windows), when i play games or decode movies it goes up to 100% 4130MHz. And it is stable as a rock tested 24/7 prime 95 and OCCT and Intel burn test.
My settings are=
Eist enabled
Turbo enabled
C-state disabled
Greenpower auto
My CPU temp in idle is 24° cores 38° and this on aire (room temp 21°-22°) Load 100%=CPU 60 and cores 70°-72° ( prime stressing), gaming CPU 42°-45°.
For more info on my sys. follow link and see my overclock and voltage settings.http://www.hardware.info/nl-NL/usersys/cm9xZ51mk2yd/view/
I also changed cpu skew and ioh skew to 200ps so i don't get BSOD that says :cpu did not receive clock on time , but this is only necessary when i go above 178 MHz BCKL.

CPU Cooling Fan not working

Hi,
CPU Cooling fan not spinning and showing error on startup saying fan not working properly.MY HP Pavilion G6 laptop's Product number: B0P25PA#ACJ and Serial number: [edited by Moderator]. I want to replace the same. Can anyone tell me which model of fan would be appropriate?
Thnks in advance.
Thanks,
PSantra

Hi @Psantra ,
Thank you for visiting the HP Support Forums. I'm sorry to inform you that your post has needed some editing to remove personal information such as the Serial Number in your Post. From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

[865PE/G Neo2 Series] Zalman CPU cooler doesn't fit, Northbridge Sink remove?

Hi,
I have a problem fitting a Zalman (CNPS7000B-Cu) cpu cooler - the MSI northbridge sink is too high and too close to the cpu.
Can I replace the NB sink with one with a lower profile?
( Incidently, I'm not overclocking, although I do use this machine as an audio machine and it does get quite hot.
- If I can replace - any recommendations?
- If not - any recommendations for a reasonably priced and quiet cooler that will fit (i.e with a narrow profile).

I had the same problem on my 865PE Neo2-PFS Platinum Edition mobo. Zalman's website indicated that the CNPS7000a-AlCu fits on this board, but it doesn't. The diagonally placed northbridge heatsink is in the way. I originally thought I'd bend a few of the Zalman's fins out of the way, but then I decided if I could do something with the northbridge heatsink. I removed the northbridge heatsink and removed the 2 fins that were in the the way of the Zalman. I wanted to repalce the modded northbridge heatsink using some AS5 but the stock thermal goo (some pink stuff) was impossible to get off, even with alcohol or acetone. So I smeared some AS5 on anyway and just mooshed the heatsink back on with the pink junk and AS5.
I noticed that the northbridge gets really hot at stock speeds (200 FSB). I'm planning on overclocking my 2.4C to 3GHz (250 FSB) today, so I hope the northbridge doesn't burn up. Gonna aim a fan at it and hope for the best.
Hope the "bend 2 fins off the northbridge heatsink mod" helps all you guys that want to put Zalman's on your CPU's.
-Coelacanth

Error with new CPU cooler

Hello, I just put a Vantec Aeroflow AMD into my MSI K7T 266 pro2-u mboard and upno startup I get an error relating to unabling to detect CPU spinning. However it is spinning and temp was 34C. I have noticed that the three colours of wires are "yello, black and red" whereas on defauly CPU cooler it was " Blue, Black red." Is it just a case of incompatibility as I now have disabled CPU fan detection. Thanks.

Had the same problem with same m/b and cooler. Long story short,purchased a seperate T.M.D fan rated at 5600rpm part no PD1270155B-2F and fitted to cooler and bios detected it at 5600rpm. The 5600 rpm fan was slightly noiser than the fan fitted to the vantec cooler I bought and it was gold coloured not silver. Whats also strange was cpu temp dropped from 41C to 37.5C. This raises a question that maybe the coolers are packaged with 4300rpm fans instead of 5600rpm ,the specs say 5600rpm fan but who knows. Have bought 3 vantec coolers and all three have no fan detection. Bought 3 5600rpm fans and all have fan detection. Hand held tacho rated the silver ones about 4250rpm and the gold ones at 5560rpm. Figure this one out ?(

Help me find a cpu cooler please.

Hi everyone,
Im having some difficulty finding a decent cpu cooler for my box,
atm im using the boxed cooler from AMD modded with a 80mm papst fan,
it runs pretty quite, but the temps aren't that good.
Ive tried adding some more fans in the kabinnet, but then it makes more noise, which is unpractical.
There are so many brands and types of cpu coolers, and since im really not following with the hardware developent anymore
im really at lost with this, so i hope some of you gurus can help me out.
It should be pretty simple
sys specs:
Motherboard: MSI K8N Neo2 Platinium
cpu: A64 3500+
Thanks a lot

I guess its a winchester 939 pin ( 2.2Gz with 512kb cache )
Code: [Select]
~ sensors
w83627thf-isa-0290
Adapter: ISA adapter
VCore: +1.41 V (min = +1.40 V, max = +1.55 V) ALARM
+12V: +12.71 V (min = +10.82 V, max = +13.19 V)
+3.3V: +3.20 V (min = +3.14 V, max = +3.47 V)
+5V: +5.04 V (min = +4.75 V, max = +5.25 V)
-12V: -14.91 V (min = -10.80 V, max = -13.18 V)
V5SB: +5.11 V (min = +4.76 V, max = +5.24 V)
VBat: +2.69 V (min = +2.40 V, max = +3.60 V)
fan1: 0 RPM (min = 675000 RPM, div = 2)
CPU Fan: 0 RPM (min = 21093 RPM, div = 2)
fan3: 0 RPM (min = 112500 RPM, div = 2)
M/B Temp: +29°C (high = +0°C, hyst = +0°C) sensor = thermistor
CPU Temp: +55.0°C (high = +80°C, hyst = +75°C) sensor = diode
temp3: +32.5°C (high = +80°C, hyst = +75°C) sensor = thermistor
vid: +1.475 V (VRM Version 9.0)
alarms:
beep_enable:
Sound alarm disabled

"I have an HP Pavillion computer & want 2 put in a quiet CPU cooler. Which one fits that's quietest?

I'm looking to do some home audio recording and need a quiet fan in the computer. The guys at Best Buy had me buy a Corsair A50, but the fitting wasn't correct for the Pavillion (not sure if 'fitting' is the correct word - I'm talking about where the CPU cooler sits). In addition, the A50 was too tall for the Pavillion's box. Any help would be appreciated.

Sorry, but this is a peer-to-peer user support forum. HP maintains no official presence on the forum. There is no way to trace your stolen computer. Please file a claim with your insurance agent or company for the loss. They will require a copy of the police report.
The reason your OS is invalid is because it is tied to the motherboard in your stolen computer. The HP OEM Windows OS requires information in HP motherboard to cause the OS to activate. This is the way the OEM licenses works. The only proper way to correct this issue is to purchase a new copy of Windows.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

What is CPU Phase control?

In my P67A-C45 green power menu the first option entry is CPU Phase Control and there are two option: what is difference from APS and Intel SVID Mode?
Thanks in advance!

CPU Phase Control refers to the load-dependent automatic CPU PWM Phase switching logic (the number of phases used varies with CPU load). APS is the board's control logic and Intel SVID is the CPU's own control logic for this kind of phase control. Use whatever works best for you.

CPU cooler that works with K8N Neo4 Platinum/SLI motherboard

I have read that some say the Zalman interferes on this board with the 1, and 2 ram slots, is this true? I'm using the 3500 Winchester CPU.
Does someone have a part number if the Zalman is; a) the best, and b) clears properly.
Also I see everyone talking about Artic Silver 5. What does the"5" mean? I have Artic Silver that I have been using for about 2 years, but there iis no designation "5". Do I need the new stuff?
Thanks

I don’t know muck about artic silver, but I have a comment on the cpu-cooler question.
I recently bought a K8N SLI Platinum, which has an almost identical layout as the Neo4 Platinum. I use a Termalright XP 120 cooler which according to there webpage does not fit on this board. But I didn’t had much problem at all! It is tight with the first ram slot thaw, and with a memory just a few millimetres higher than mine it wouldn’t fit (I use TwinMOS PC3200).
Unfortunately, I don’t know if it’s a similar situation with the Zalman coolers, but I really like to recommend the XP120 (or even XP80) anyway. It keeps my cpu (althorn 3000+) at almost the same temp as the sounding system, during normal use. And since you are free to put any fan you like, you have a very good start making your system really quiet.

CPU cooler

Hello,
In order to overclock more my system I'm searching a great CPU cooler.
In my other pc ( Athlon XP with nforce2) I have a thermaltake Volcano 7+ that goes very well.
So I'm am tempted to buy Thermaltake spark 6+ cooler ( with the plus of an easy integration with the hardcano front panel of my Xaser III lanfire case).
But I 'm opened at other solutions so I ask you an advice.
Which is the better cooler (non idraulic or TEC) for you?
I have seen also same ZALMAN interesting cooler in a shop but I can 't find a site in which are shown detailed specs. Do you know where I can find more infos?
Thanks

Quote
Originally posted by u4iia
I did allot of research on the Web before purchasing a air heatsink. I ended up getting the Thermalright SLK-947U. It was a little spendy, but the workmanship and performance is awsome not to mention you get to pick your own fan. I personaly run a 92MM on it. The only drawback is you will need to remove the MB to install the x-bracket and you have to go to the Web site for instructions as none come with it. You will not regret the Thermalright I promise.
how well does it fit on the motherboard? u havent/didnt have any problems with the hsf touching the psu or anything? im seriously thinkin of gettin a 947U but last i looked inside my case there didnt seem to be that much free space between the stock intel cooler and my psu.. i think theres about 2.5 - 2.75 cm there atm.
and after its iinstalled in which direction is the orientation of the fins? vertically or horizontally?
man i want to get this cooler

CPU phase control by default after wake up (Z97 Gaming 3)

Hello,
I've juste bought a MSI Z97 Gaming 3 to replace my MSI Z87-G45.
I want to inform you that when CPU phase control is set to "optimized", this setting is restored to default mode after waking up.
I made many tests to confirm this :
- with optimized before sleep and wake up, my IDLE consumption is 37W
- with optimized after sleep and wake up, my IDLE consumption is 42W
- with default setting, my IDLE consumption is always 42W
Changing Windows energy settings didn't fix this issue. Changing wake up settings in the BIOS didn't correct this issue.
Could you fix it in your next BIOS ?
Moreover, I didn't get what it exactly came from but my system crashed few times. It seems that it is a problem with fast RAM boot setting.
Thanks

MSI HQ Users-to-Users Forum
as the name suggests this is a USER to USER forum and there are no people from MSI here so please contact them Directly >>How to contact MSI.<<

CPU temp control

Hi guys,
I recently upgraded my K7T266 pro2 to a XP 2100+ processor.
And i am unable to keep this CPU cool, it presently has a GlacialTech
Igloo 2410 Pro (which is rated up to XP 2800+). When running just windows
its fine. But when i play high graphic games the system freezes. The HS/F is seated properly and have a thin coat of thermal grease on both CPU core and
HS. Has anyone ever had a problem keeping this CPU cool? Any suggestions that would help my situation?
Thanks
Nick

yes its a Palomino
Room temp is about 18 degress C
Case averages about 40 degress C
And CPU idle is about 40 degress also.
Its hard to say what temp it gets to when systems freezes.
If i play Max Payne 2....u can usually go for about 15 minutes of
game play before system freezes. I also have 4 80mm fans blowing air out the case (two back...one side and one on top)...and also one 80mm sucking air into front of case. Any suggestions?
Nick

Cpu cooler control

Similar Messages

Maybe you are looking for