CPU for M57P

I have a M57p Lenovo Think Centre 6395 and I wanted to update the CPU, a friend gavce me an E8500 Dual Core and I added it in. The machine goes through the Boot setup but stops and says error with CPU code but, if I hit the F2 button for resume, the computer continues to boot and goes into Windows 7. I have since found out that only the E8400 will be accepted straight off by this machine, a shame.
I would like to know if it is possible to somehow use the 2RKT64A Bios File listed also for the M57p so I could update the CPU code as that is what is listed as the first fix for this Bios. I know I am clutching at straws but I would not like to have to go out and by a E8400 when I have a pertfectly good E8500 here.
Any help would be appreciated.
Solved!
Go to Solution.

Hi Pendaws,
Installing a bios update not made for your machine is risky. in the best case scenario it won't install, in the worst it will brick your bios and destroy your motherboard.
There is no official way of bypassing the whitelist that I know of unless using unoficial bios wich can't be discussed here.
Vince.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Similar Messages

3750 stack - high cpu for "hulc running con" every one or two minutes

I have a stack of 4 x 3750 :
Switch Ports Model SW Version SW Image
* 1 28 WS-C3750G-24PS 12.2(53)SE C3750-IPSERVICES-M
2 12 WS-C3750G-12S 12.2(53)SE C3750-IPSERVICES-M
3 12 WS-C3750G-12S 12.2(53)SE C3750-IPSERVICES-M
4 28 WS-C3750G-24PS 12.2(53)SE C3750-IPSERVICES-M
And every minutes or two minutes (approximately), I have high cpu for "hulc running con" without doing anything.
coeur#sh proc cpu sort
CPU utilization for five seconds: 86%/28%; one minute: 49%; five minutes: 49%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
312 670849714 3362057 199535 44.22% 5.00% 4.96% 0 hulc running con
82 234351581 353049778 663 3.76% 5.99% 5.95% 0 HLFM address lea
277 11138 8537 1304 1.05% 1.70% 1.12% 1 Virtual Exec
142 10589757 353659360 29 0.90% 0.33% 0.22% 0 Hulc LED Process
coeur#sh proc cpu sort
CPU utilization for five seconds: 95%/27%; one minute: 52%; five minutes: 49%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
312 670832227 3361981 199545 55.59% 8.95% 5.76% 0 hulc running con
82 234334259 353043921 663 3.99% 5.78% 6.02% 0 HLFM address lea
277 6286 7531 834 0.63% 1.06% 0.61% 1 Virtual Exec
106 15342490 19948859 769 0.47% 0.20% 0.15% 0 hpm counter proc
119 2034091 13865800 146 0.31% 0.04% 0.03% 0 LLDP Protocol
142 10588906 353653113 29 0.31% 0.21% 0.16% 0 Hulc LED Process
How can I find which is doing a "show run" ? Which debug can I do ?
Thanks

We solved our problem it was caused because we were routing in and out the same L3 interface.
Fixed this issue and our CPU dropped dramatically.

After installing 10.5.6, finder and quicklook server hog cpu for 10 minutes

I installed 10.5.6. Now upon every restart the Finder and Quick Look Server use 60-80% of my cpu for 5-10 minutes. This means that I can't really do anything until these processes are done because they cause constant delays. This did not happen in the previous version of Leopard, and if it's intentional on the part of Apple, it's a mistake. Very very annoying. Any ideas how to get this to stop?

stuartwgibson,
How did you install 10.5.6?
If you used "Software Update," you might want to try installing the Mac OS X 10.5.6 Combo Update.
;~)

Doc2text process using 100% cpu for way too long

I've run into this issue before, and have never received a satisfactory resolution.
When we publish certain PDF documents via collab to the KD, the doc2text process on our portal servers (also our API servers) spin up to 100% CPU for about 90 seconds. This causes the publish from collab to fail, so we resort to directly uploading the file to the KD via content upload.
1) Why is doc2text running on our portal servers in the first place? Is this a result of the portal server or api service? If i move the API service off to another machine, will that remove this CPU hog from our front end servers?
2) Has anyone seen this before, or found a way around it? Is there a newer version of doc2text in 10gR3 that isn't so terrible?
I'm preparing to move to 1-cpu virtuals in our new environment so any process that takes up 100% of the CPU is going to kill performance.

Doc2text is native search client functionality used by portal, automation, ws, collab, publisher, etc. The portal components use it when indexing content to search server. It is installed seperately with each portal component. If you have multiple portal components installed on the same box, the ones that use Doc2text will share it from the common folder where it is located. Doc2text uses different libraries for the purpose of raw text extraction and processing, the processed information being sent in a proprietary format to the search server.
Doc2text is a processor heavy component as it needs to execute intensives tasks necessary to parse and extract raw data from such file formats as Microsoft Office and Adobe Acrobat. Some files may be more complex to extract data from and take longer for this task to complete.
The best way to increase performance would be to install the various portal components onto their own machines. For example not installing portal and automation on seperate servers. This way when you run a crawler job that imports files, the running of doc2text will not use cpu cycles on the portal web server.

Should I trade 2,6 Ghz CPU for a 3,0Ghz?

Hi all.
I currently have a 2,6 Ghz, that i'm very happy with.
I do run a sllight OC on it (FSB 218) to get the most out of my RAM
However, I've been offered to trade a 3,0 Ghz 800FSB Nortwood C CPU for my 2,6 800FSB Northwood C Cpu.
i know, that the 3 gig's don't OC very well (because of the heat i guess), but I'm not into heavy OC'ing. But i DO want to run my FSB at at least 216 ratio 1:1.
Do you guys think that the 3 gig will run at FSB 216 with air cooling.
The batch no. for the 3gig CPU i've been offered is sl6wk
Should i trade, or will i be better off with my current 2,6C CPU?
-Any comments would be much appreciated
thanks in advance

Thanks a lot for your replys - i appreciate it.
Approx USD $10 are to be paid by me (keep in mind the prizes in Denmark are very high compared to US prices. A 2,6 GHZ CPU like mine is USD $200+). However, the CPU is still within warranty (it's just one month old -my 2,6 is 3 months old). But, I also know, that if a CPU has been OC'ed, it's no longer under warranty...
Quote
bilnv
I would be asking why would someone want to trade you a 3Gh for a 2.6 ? That would make me specious from the start. Are you sure their 3.0 CPU is fully functional or have they been doing some serious overclocking on it?
Is there any money changing hands?
That's a very good point, and that's exactly what came to my mind as the first thing as well.
I think the reason why he wants to trade is, that a decent 2,6 GHz CPU will reach approximately the same speed as a 3.0 GHz only with a higher FSB (which will be faster)
He had a 2,6 Ghz CPU before, and he had it running @ 3,4 Ghz -which I think is pretty good.
I'm not interested in this high OC's -i just want to use the full potential of my RAM (at least FSB 216)
I don't know how hard his CPU has been clocked, so, in your opinion, would that be enough reason not to trade? (My CPU has been OC'ed as well, but I've only been running it @ 220 FSB -which isn't a lot
I really need second opinions on this matter as I'm actually pretty happy with my current CPU, but i wouldn't mind a bit of extra speed at all. As of right now, I'm leaning towards trding, but your comments has made me unsure (which is good)
He's dropping by on saturday unless i decide not to trade -so any further thoughts on this would be greatly appreciated

Oracle February 2013 CPU for Java SE on e-business

Hi,
I am a bit confused about these java updates again!
Is this new & accelerated CPU for desktops and application as well? We are on R12.1.3 and I am not sure where this CPU needs to go.
When I did java -version on the apps tier, I got:
java version "1.6.0_10"
Java(TM) SE Runtime Environment (build 1.6.0_10-b33)
Java HotSpot(TM) Server VM (build 11.0-b15, mixed mode)
A quick response will be appreciated please. Thanks
Edited by: gbite on Feb 8, 2013 12:18 PM

gbite wrote:
Thanks as always Hussein and others.
As I stated above, on the apps-tier when I do:
java -version , I got:
java version "1.6.0_10"
Java(TM) SE Runtime Environment (build 1.6.0_10-b33)
Java HotSpot(TM) Server VM (build 11.0-b15, mixed mode)
For this CPU and others like that, does that mean i should update the apps tier java version to say e,g java version "1.7.0_13" (the latest). And the client desktop (Windows 7) to be running 1.7.0_13 as well?Correct.
Any notes that talks about the desktop and apps -tier java version?It is all in one doc which is referenced above -- Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite Release 12 [ID 393931.1]
Once you configure the JRE plug-in on the server, the clients will be prompted to download and install it once they access the application for the first time.
Please make sure you meet the minimum requirements in (Recommended Browsers for Oracle E-Business Suite Release 12 [ID 389422.1]).
Thanks,
Hussein

When does Oracle stop providing CPU for 11gR1?

Oracle will stopping provide CPU for 10.2 in July 2011. We are debating whether we should upgrade 10.2 to 11gR1 or 11gR2.
11gR2 requires a Kernal Version released in 2008, but the current server OS only has the 2006 version. SA wants to wait for the OS patch. Then, the only option for us DBA would be to upgrade to 11gr1 which is supported by the current OS. It makes sense if Oracle provides CPU for 11gR1 for a while. I have been trying to find out the de-supporting time, but to no avail. If this information is available, please help me out.
Thanks,
Jasmine

user12062825 wrote:
I am sorry I did not file a SR for this question.SO you turn to the community rather than the source for the CPU to get an answer about the CPU?
Not a problem, but perhaps not optimal to my way of thinking.
If you have a service contract, you normally can open any number of service requests without additional fees. And questions like you have are legitimate. (Although the Oracle Support community does respond to these questions a LOT faster than to SRs.)

Audio Bin - Select unused - Delete - Hangs on 100% CPU for long time

Hi
I am running Logic Studio 9.0.2 on OS X 10.5.8 on a Mac Pro. Logic was upgraded from version 7.
In Audio Bin and "Select Unused" and then "Delete", the application might hang on 100% CPU for hours on large projects.
Anyone with an idea of what the problem might be? This was not a problem i Logic Pro 7.
Thanks!
GD

I have this same problem, though I'm on 10.5.7. I was hoping maybe updating the OS would help but apparently not. I also get very slow file-selection windows sometimes, like when I go to bounce a file. Navigating to a specific folder is painfully slow. Would like to hear if any Snow Leopard users are experiencing this.
Bull

Finder using 90% cpu for no reason?

Not sure why. Not using quicklook, Not using cover flow. Just staring at my files.

Figured it out. Turns out if "Show item info" is enabled for the desktop it will cause Finder to bug out at 100% CPU for some reason. I removed everything on my desktop except a few things (Macintosh HD, No Name volume for FAT32, 2 folders, and an application shortcut)...
This was found when I was googling the issue and a guy had a similar issue in os x 10.3 ... due to an inability for it to query the file.
at least it's fixed.. though not sure which folder caused the issues.
Thanks guys.

High cpu for apple id in my windows why?

40% cpu for apple IE DAV (32bit), is this normal?

What happens when you try? Error message?
Just what are you doing?

Maximum Cpu For K9n Ultra

Hi guys,
I have a K9N Ultra Mainborad(about 2.5 years)
I need increase my computer calculations now and my cpu is 4000+ !!!
What is the best cpu for this mainboard?(in last amd cpu)
I change my vga about 1 month ago(older vga was DEAD) and my newer vga is MSI GT430 OC dual fan.
Installed ram is 3Gb(2*512Mb + 2Gb bus800).
spec of this motherborad:
http://www.motherboards.org/mobot/motherboards_d/MSI/K9N%2BUltra%2B%2528MS-7250%2529/
thanks a lot.

An Athlon X2 6400+ would be the best CPU your motherboard supports. (CPU code ADX6400IAA6CZ)
Here's the list of supported CPUs for your board: http://eu.msi.com/index.php?func=prodcpu2&prod_no=253&maincat_no=1

Help with July CPU for OAS

Hi,
I have OAS forms and reports installed. I am trying to install the July CPU. I read in the doc that we need to have 10.1.0.5 Patchset installed. The version I have is
cat $ORACLE_HOME/config/ias.properties
[InstallData]
Version=10.1.2.0.2
$ORACLE_HOME/OPatch/opatch lsinventory
1) Patch 5488476 applied on Wed Mar 07 13:32:53 EST 2007
[ Base Bug(s): 5488476 ]
2) Patch 5700154 applied on Wed Mar 07 12:52:17 EST 2007
[ Base Bug(s): 5406923 4359124 5467758 5483321 5648102 5228114 5057964 4439359 5512094 5347751 5483362 4691191 4754900 4331689 4640704 5458543 5700202 5029950 5230186 5464895 5029952 4554352 5477636 5029954 5472440 5225797 5474223 4047969 4402808 4863773 4554284 4874628 4871035 5091108 5401921 5059573 4458415 5012138 5078730 4605877 5226235 4900129 5095648 4751932 5250000 5493640 5239126 5249970 4606463 5092277 4393143 4925103 5161794 4863817 5091837 4939157 5094098 5012141 4587572 4741671 5222931 5666774 5227879 5055442 5483346 4661844 4152843 5637094 5222032 5242647 4614705 4614707 5441823 5417371 4671216 4966417 4616743 5700154 5023945 5092688 4449900 5101276 5598641 5078757 4768040 5049074 4348230 5070696 5049077 5644862 5348040 ]
3) Patch 4697797 applied on Thu Feb 15 16:12:05 EST 2007
[ Base Bug(s): 4589885 ]
Now, I know I have installed patch p4505133. I go to
$ ORACLE_HOME/oui/bin/runInstall and can see Oracle Database 10g patchset 3 10.1.5.0
Does that mean I can just download Patch 4960210 and install it ???? Can you please advise. thanks
Has anyone not installed the JULY CPU for OAS/forms & reports ????

I have installed patch 6083645. $ opatch lsinventory
Installed Patch List:
=====================
1) Patch 6083645 applied on Tue Aug 28 12:31:05 EST 2007
[ Base Bug(s): 5483321 5521413 4439359 5512094 5347751 4691191 4754900 5861360 4640704 5458543 4329444 5029950 5464895 5029952 5477636 5029954 5738539 5474223 4402808 4871035 5091108 5584790 4605877 5012138 4751932 5362789 5490845 5092277 4606463 5933477 4393143 5673808 4863817 5091837 5094098 5012141 5675556 4679094 4741671 5894511 5222931 5910829 5227879 4152843 4661844 5483346 5637094 4905112 4614705 4614707 5922120 5441823 6059797 5408664 4616743 5023945 5598641 4768040 5049074 5490935 5049077 5406923 5258410 5689908 4359124 4969005 3962946 5467758 6083645 5922139 5648102 5868226 5563264 5228114 5057964 5483362 4331689 5504472 4597251 5700202 4903532 5230186 6055387 4554352 5650178 5472440 5225797 4863773 4047969 6083653 4874628 4554284 5401921 5151518 5059573 4458415 5078730 5509707 5226235 4900129 5722496 5095648 5250000 4561867 5493640 5239126 5249970 4712638 5161794 5354517 4925103 4939157 5501362 5635164 4587572 5666774 5055442 5222032 5242647 5728609 5605370 4335559 5417371 4671216 4575854 5488328 5243019 4966417 5884075 5700154 4899479 4610820 5092688 3837600 5101276 4449900 5078757 4348230 5233111 5070696 5644862 5348040 4197970 6017954 ]
Is there any post install script that I need to ru ????

Is there a quad core cpu for my macbook 13in pro early 2011 with the socket P8400

Is there a quad core cpu for my macbook 13in pro early 2011 with the socket P8400?
The duel core is not doing the work i need done....

You cannot upgrade the CPU on a notebook. They are integrated onto the motherboard. Sell the one you have then purchase a new one with the quad-core CPU.

CPU for a DX 2250

CPU for a DX 2250 computer?

JMckee80, welcome to the forum.
Here are the processors that are supported by the motherboard:
AMD Sempron64 processor with 800 MHz HyperTransport
* 3000+, 1.6 GHz, 256K cache, 1.6 GHz FSB 441230-001
* 3200+, 1.8 GHz, 128K cache, 1.6 GHz FSB 441229-001
* 3400+, 1.8 GHz, 256K cache, 1.6 GHz FSB 433506-001
* 3600+, 2.0 GHz, 256K cache, 1.6 GHz FSB 435919-001
AMD Athlon64 processor with 1.0 GHz HyperTransport,
* 3500+, 2.2 GHz, 512 KB cache, 2.0 GHz FSB 435911-001
* 3800+, 2.4 GHz, 512 KB cache, 2.0 GHz FSB 435912-001
AMD Athlon 64 Dual Core processor with 1.0 GHz HyperTransport
* 3800+, 2.0 GHz, 1.0 MB cache, 2.0 GHz FSB 435913-001
* 4200+, 2.2 GHz, 1.0 MB cache, 2.0 GHz FSB 435914-001
* 4600+, 2.4 GHz, 1.0 MB cache, 2.0 GHz FSB 435915-001
Here is the "Illustrated Parts & Service Map" for the computer. You will find the processors on P.2 of the guide.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

XOrg is maxxing out my CPU for several minutes after start [UNSOLVED]

Since the last update, XOrg has been using 99% of my CPU power for about three minutes after it is started. This happens whether I am using Slim, console login, whatever; I checked with top and it is definitely X that is using up the CPU power. This happens on Debian as well as Arch.
Here is my Xorg.0.log:
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/skylark:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-ARCH x86_64
Current Operating System: Linux skylark 2.6.27-ARCH #1 SMP PREEMPT Fri Nov 14 08:56:10 UTC 2008 x86_64
Build Date: 17 August 2008 10:36:51PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 28 10:54:27 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Touchpad0"
(**) |-->Input Device "Mouse0"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x7c06c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,27a0 card 1025,0110 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,27a2 card 1025,0110 rev 03 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,27a6 card 1025,0110 rev 03 class 03,80,00 hdr 80
(II) PCI: 00:1b:0: chip 8086,27d8 card 1025,0110 rev 02 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,27d4 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 1025,0110 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 1025,0110 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 1025,0110 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 1025,0110 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 1025,0110 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e2 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b9 card 1025,0110 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,27c4 card 1025,0110 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 1025,0110 rev 02 class 0c,05,00 hdr 00
(II) PCI: 02:00:0: chip 11ab,4352 card 1025,0110 rev 14 class 02,00,00 hdr 00
(II) PCI: 03:00:0: chip 168c,001c card 1468,0428 rev 01 class 02,00,00 hdr 00
(II) PCI: 0a:09:0: chip 104c,8039 card 3000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 0a:09:2: chip 104c,803b card 1025,0110 rev 00 class 01,80,00 hdr 80
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,11), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[b]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x34000000 - 0x340fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:28:1), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0x34100000 - 0x341fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:28:2), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 10: bridge is at (0:30:0), (0,10,14), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 10 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
(II) Bus 10 non-prefetchable memory range:
[0] -1 0 0xd0200000 - 0xd02fffff (0x100000) MX[b]
(II) Bus 10 prefetchable memory range:
[0] -1 0 0x30000000 - 0x33ffffff (0x4000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 11: bridge is at (10:9:0), (10,11,14), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 11 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
(II) Bus 11 prefetchable memory range:
[0] -1 0 0x30000000 - 0x33ffffff (0x4000000) MX[b]
(--) PCI:*(0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0300000/19, 0xc0000000/28, 0xd0400000/18, I/O @ 0x1800/3
(--) PCI: (0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0380000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xd0205000 - 0xd0205fff (0x1000) MX[b]
[1] -1 0 0x34100000 - 0x3410ffff (0x10000) MX[b]
[2] -1 0 0x34000000 - 0x34003fff (0x4000) MX[b]
[3] -1 0 0xd0644000 - 0xd06443ff (0x400) MX[b]
[4] -1 0 0xd0440000 - 0xd0443fff (0x4000) MX[b]
[5] -1 0 0xd0380000 - 0xd03fffff (0x80000) MX[b](B)
[6] -1 0 0xd0400000 - 0xd043ffff (0x40000) MX[b](B)
[7] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[8] -1 0 0xd0300000 - 0xd037ffff (0x80000) MX[b](B)
[9] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[10] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[11] -1 0 0x000018b0 - 0x000018bf (0x10) IX[b]
[12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[14] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[15] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[16] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[17] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[18] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[19] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[20] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd0205000 - 0xd0205fff (0x1000) MX[b]
[1] -1 0 0x34100000 - 0x3410ffff (0x10000) MX[b]
[2] -1 0 0x34000000 - 0x34003fff (0x4000) MX[b]
[3] -1 0 0xd0644000 - 0xd06443ff (0x400) MX[b]
[4] -1 0 0xd0440000 - 0xd0443fff (0x4000) MX[b]
[5] -1 0 0xd0380000 - 0xd03fffff (0x80000) MX[b](B)
[6] -1 0 0xd0400000 - 0xd043ffff (0x40000) MX[b](B)
[7] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[8] -1 0 0xd0300000 - 0xd037ffff (0x80000) MX[b](B)
[9] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[10] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[11] -1 0 0x000018b0 - 0x000018bf (0x10) IX[b]
[12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[14] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[15] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[16] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[17] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[18] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[19] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[20] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x33ffffff (0x33f00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x33ffffff (0x33f00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0205000 - 0xd0205fff (0x1000) MX[b]
[5] -1 0 0x34100000 - 0x3410ffff (0x10000) MX[b]
[6] -1 0 0x34000000 - 0x34003fff (0x4000) MX[b]
[7] -1 0 0xd0644000 - 0xd06443ff (0x400) MX[b]
[8] -1 0 0xd0440000 - 0xd0443fff (0x4000) MX[b]
[9] -1 0 0xd0380000 - 0xd03fffff (0x80000) MX[b](B)
[10] -1 0 0xd0400000 - 0xd043ffff (0x40000) MX[b](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[12] -1 0 0xd0300000 - 0xd037ffff (0x80000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[16] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[17] -1 0 0x000018b0 - 0x000018bf (0x10) IX[b]
[18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[23] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[24] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[25] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[26] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 945GM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x33ffffff (0x33f00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0205000 - 0xd0205fff (0x1000) MX[b]
[5] -1 0 0x34100000 - 0x3410ffff (0x10000) MX[b]
[6] -1 0 0x34000000 - 0x34003fff (0x4000) MX[b]
[7] -1 0 0xd0644000 - 0xd06443ff (0x400) MX[b]
[8] -1 0 0xd0440000 - 0xd0443fff (0x4000) MX[b]
[9] -1 0 0xd0380000 - 0xd03fffff (0x80000) MX[b](B)
[10] -1 0 0xd0400000 - 0xd043ffff (0x40000) MX[b](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[12] -1 0 0xd0300000 - 0xd037ffff (0x80000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[16] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[17] -1 0 0x000018b0 - 0x000018bf (0x10) IX[b]
[18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[23] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[24] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[25] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[26] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x33ffffff (0x33f00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0205000 - 0xd0205fff (0x1000) MX[b]
[5] -1 0 0x34100000 - 0x3410ffff (0x10000) MX[b]
[6] -1 0 0x34000000 - 0x34003fff (0x4000) MX[b]
[7] -1 0 0xd0644000 - 0xd06443ff (0x400) MX[b]
[8] -1 0 0xd0440000 - 0xd0443fff (0x4000) MX[b]
[9] -1 0 0xd0380000 - 0xd03fffff (0x80000) MX[b](B)
[10] -1 0 0xd0400000 - 0xd043ffff (0x40000) MX[b](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[12] -1 0 0xd0300000 - 0xd037ffff (0x80000) MX[b](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[19] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[20] -1 0 0x000018b0 - 0x000018bf (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[26] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[27] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[28] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[29] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
[30] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[31] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xD0300000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 2.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x80000202 to 0x80000242
(WW) intel(0): PIPEBSTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS LBLC_EVENT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0000
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd0400000 - 0xd043ffff (0x40000) MS[b]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MS[b]
[2] 0 0 0xd0300000 - 0xd037ffff (0x80000) MS[b]
[3] -1 0 0x00100000 - 0x33ffffff (0x33f00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xd0205000 - 0xd0205fff (0x1000) MX[b]
[8] -1 0 0x34100000 - 0x3410ffff (0x10000) MX[b]
[9] -1 0 0x34000000 - 0x34003fff (0x4000) MX[b]
[10] -1 0 0xd0644000 - 0xd06443ff (0x400) MX[b]
[11] -1 0 0xd0440000 - 0xd0443fff (0x4000) MX[b]
[12] -1 0 0xd0380000 - 0xd03fffff (0x80000) MX[b](B)
[13] -1 0 0xd0400000 - 0xd043ffff (0x40000) MX[b](B)
[14] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[15] -1 0 0xd0300000 - 0xd037ffff (0x80000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[19] 0 0 0x00001800 - 0x00001807 (0x8) IS[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[23] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[24] -1 0 0x000018b0 - 0x000018bf (0x10) IX[b]
[25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[30] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[31] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[32] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[33] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 110080 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 440316 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xd0300000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] mapped front buffer at 0xc1000000, handle = 0xc1000000
(II) intel(0): [drm] mapped back buffer at 0xc4000000, handle = 0xc4000000
(II) intel(0): [drm] mapped depth buffer at 0xc5000000, handle = 0xc5000000
(II) intel(0): [drm] mapped classic textures at 0xc6000000, handle = 0xc6000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xc0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) intel(0): Option "MigrationHeuristic" "greedy"
(II) EXA(0): Offscreen pixmap area of 31457280 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x06000000 (pgoffset 24576)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000001f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000001fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000001fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000001fe33000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x01000000-0x01ffffff: front buffer (10240 kB) X tiled
(II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB)
(II) intel(0): 0x04000000-0x04ffffff: back buffer (10240 kB) X tiled
(II) intel(0): 0x05000000-0x05ffffff: depth buffer (10240 kB) X tiled
(II) intel(0): 0x06000000-0x07ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 304 x 190
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "acer_laptop"
(**) Keyboard0: XkbModel: "acer_laptop"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) Touchpad0 auto-dev sets device to /dev/input/event8
(**) Option "Device" "/dev/input/event8"
(**) Option "SHMConfig"
(--) Touchpad0 touchpad found
(**) Option "CorePointer"
(**) Touchpad0: always reports core events
(**) Option "Protocol" "ImPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "ImPS/2"
(**) Option "SendCoreEvents"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ChordMiddle"
(**) Mouse0: ChordMiddle
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Option "EmulateWheel"
(**) Option "EmulateWheelButton" "2"
(==) Mouse0: YAxisMapping: buttons 4 and 5
(**) Mouse0: EmulateWheel, EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) evaluating device (Touchpad0)
(II) XINPUT: Adding extended input device "Touchpad0" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) Mouse0: ps2EnableDataReporting: succeeded
(--) Touchpad0 auto-dev sets device to /dev/input/event8
(**) Option "Device" "/dev/input/event8"
(--) Touchpad0 touchpad found
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "LPL", prod id 42240
And my xorg.conf:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Touchpad0" "CorePointer"
InputDevice "Mouse0" "SendCoreEvents"
Option "AutoAddDevices" "False"
EndSection
Section "Module"
Load "freetype"
Load "extmod"
Load "glx"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/input/mice"
Option "ChordMiddle"
Option "EmulateWheel"
Option "EmulateWheelButton" "2"
EndSection
Section "InputDevice"
Identifier "Touchpad0"
Driver "synaptics"
Option "Protocol" "auto-dev"
Option "Device" "/dev/input/mice"
Option "SHMConfig"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "acer_laptop"
Option "XkbLayout" "us"
EndSection
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
Option "Migrationheuristic" "greedy"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
EndSection
Section "Extensions"
Option "Composite"
EndSection
Does anyone have a clue what's going on here?
Last edited by Gullible Jones (2008-12-03 20:46:38)

So I reenabled "glx" and "DRI" and everything seems just fine. I believe the culprit in my case was simply the "NoAccel" flag being false by default.
This is now what my xorg.conf looks like:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
#RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
#Load "record"
Load "GLcore"
Load "extmod"
Load "dbe"
Load "xtrap"
Load "dri"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "QDS"
ModelName "27"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
Option "NoAccel" "true"
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
Option "DRI" "true"
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
Endsection
Section "Extensions"
Option "Composite" "Enable"
Endsection
Section "DRI"
Group 0
Mode 0666
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
And everything is A.O.K.!

CPU for M57P

Similar Messages

Maybe you are looking for