CPU goes idle and then comes back..why?

During stress testing we ran 100 concurrent logons and then logoffs with the first 84 user completing this test run in 20 - 30 seconds. During this time both Portal ap1 and ap2 hit 100% utilization on the servers. After the 20 - 30 seconds the portal aps CPU goes idle and the
remaining 16 users out of the 100 hit a 120 second delay before there request returns processing the test and completes. During this 120 sec delay I see the aps CPU go idles until the 120 sec time expires.
What is causing this 120 sec delay?

Hello Vaibhav,
sorry I have no answer to your question. I want to know what tool you are using to do the stress test. We go live in one week with our EP for CRM and I really want to know if the performance is enough for 120 Users.
Regards
Gregor

Similar Messages

  • Strange red/purple/magenta "shadow" that goes away and then comes back

    I'm having some issues with a weird discoloration that happens inside of LR. 
    When the file is loaded, it looks like this:
    Once you touch ANY slider (or do anything really), this happens:
    Note the weird red/purple/magenta area around her mouth and cheek.
    Anyone have any ideas what this is and how to stop it from happening?   I've had some suggestions that it might be a moire caused by the texture of the veil but it seems odd that LR had it right to being with.
    Any and all suggestions are greatly appreciated. 
    Thanks. 

    Don’t worry about colors that happen with Fit or Fill, because, for speed, LR uses a fast, inaccurate resampling algorithm and what you’re seeing is likely moiré.   However, if you still see it at 1:1 then that is a problem.  Try reducing the Detail slider in Sharpening to 0 and see if that makes a difference to 1:1.
    If you want you can upload one of these images to www.dropbox.com <http://www.dropbox.com>  and post a public download link to it, here, then when the issue is answered, remove it from your dropbox so it doesn’t stay available forever.

  • HT1430 Why does my iPad shut off about every 1 minute and then comes back on?

    Why does my iPad shut down every minute and then come back on ?

    Try to reset your settings... Settings--general--reset (at bottom of list)--reset all settings
    Try an iOS software restore
    http://support.apple.com/kb/HT1414
    Otherwise you may need to have apple repair the device
    https://expresslane.apple.com/Issues.action

  • Machine randomly shuts off and then comes back on.

    Hello! Basically whats happening is my computer randomly shuts off (No blue screen just powers off) and then immediately comes back on.
    I am running three monitors and a single GPU.  This has happened in two different cities (I moved) I have the same surge protector - however, other things on the protector do not reset / go off (alarm clock no battery).
    Here are the crash dumps that microsoft said happened. (I uploaded three different ones) 
    http://www.mediafire.com/download/juwuzck8wpq6j0r/issues.rar
    I'm a pretty avid builder but I'm a bit stumped with this issue. The machine will, at random, shut off completely (including lights) and then come back on, during normal activities and gameplay.
    The temps do not appear to be reaching astronomic levels, maxing out at around 60-65c (cpu) and 45c for the GPU.
    Parts:
    cpu - i7 3960x (turbo enabled normal at 3.3, w/ turbo at 3.9ghz)
    mobo -  MSI X79A-GD45 /// Intel DX79SI (have tried both, it still happens with either, MSI is a new board.
    psu - 750 Antec Gold High Current Pro
    gpu - MSI Lightning 680 (no OC)
    sdd - samsung 840 pro 
    hdd - Black 1TB
    case - HAF 942-x
    cooler - x40 kraken
    ram - G.SKILL Ripjaws Z Series 32GB (DDR1600)
    Here's what I tried
    1. Bought a new motherboard (MSI $260) to see if the issue would go away. - Failed.
    2. Was able to reproduce the issue VERY quickly when using the OC Genie2 on the MSI board, with teh button pressed, I could boot up OCCT and have it reproduce the issue with the power-off in around 2 minutes of the test. - Failed
    3. Attempted PSU and GPU stress test with stock BIOS, tests ran 1 hr+ each with no issues.  Shut down my machine and restarted it this morning and the issue came back within 5 minutes of use just sitting at the Windows Desktop. - Failed.
    4. Turned the 32 GB of ram to 1600 and enabled XMP, crashed after 3-5 days.
    5. Attempting to test each DIMM individually.
    6. Issue happened again after about two weeks of not happening.
    I've run OCCT for an hour with the "stock" bios and it didn't crash for an entire hour.  I've also attempted to use the "OC genie2" overclock function and that triggered a crash within 2 minutes of the run.
    Can anyone give me some more things to try? I'm thinking its possible it could be the PSU, but after running OCCT PSU test for 30+ minutes it had no issues.

    * Bugcheck Analysis *
    BAD_POOL_HEADER (19)
    The pool is already corrupt at the time of the current request.
    This may or may not be due to the caller.
    The internal pool links must be walked to figure out a possible cause of
    the problem, and then special pool applied to the suspect tags or the driver
    verifier to a suspect driver.
    Arguments:
    Arg1: 0000000000000020, a pool block header size is corrupt.
    Arg2: fffffa802224f9e0, The pool entry we were looking for within the page.
    Arg3: fffffa802224fa50, The next pool entry.
    Arg4: 0000000004070006, (reserved)
    Debugging Details:
    TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
    BUGCHECK_STR: 0x19_20
    POOL_ADDRESS: GetPointerFromAddress: unable to read from fffff800036ca100
    GetUlongFromAddress: unable to read from fffff800036ca1c0
    fffffa802224f9e0 Nonpaged pool
    CUSTOMER_CRASH_COUNT: 1
    DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
    PROCESS_NAME: chrome.exe
    ++++++++++++++++++===============================++++++++++++++++++++++==========4
    * Bugcheck Analysis *
    VIDEO_TDR_TIMEOUT_DETECTED (117)
    The display driver failed to respond in timely fashion.
    (This code can never be used for real bugcheck).
    Arguments:
    Arg1: fffffa80262bc4e0, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
    Arg2: fffff8800fa2be20, The pointer into responsible device driver module (e.g owner tag).
    Arg3: 0000000000000000, The secondary driver specific bucketing key.
    Arg4: 0000000000000000, Optional internal context dependent data.
    Debugging Details:
    TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
    FAULTING_IP:
    nvlddmkm+153e20
    fffff880`0fa2be20 ?? ???

  • When I close Firefox and then come back to it layer a box comes up that says it's already running. It ays to close Firefox first but when I hit close nothing happens and the box comes up again. I have to shut down my computer and restart to get into Firef

    When I close Firefox and then come back to it later a box comes up that says it's already running. It says to close Firefox first but when I hit close nothing happens and the box comes up again. I have to shut down my computer and restart to get into Firefox again. If I can't get this fixed I will start using someone else. Someone told me a way to close Firefox but I forgot what they said.
    == This happened ==
    Every time Firefox opened
    == a couple of months ago

    Hello Brian.
    You don't need to restart your computer to open Firefox again: you just need to close it manually through your application manager (CTRL+SHIFT+ESC in Processes tab). Anyway, hopefully this support article is what you need:
    http://support.mozilla.com/en-US/kb/Firefox+hangs
    What's probably happening is that you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • Can't SMS people who have gone overseas and then come back - weird!!!!!!

    I have a problem with my texts when OTHER people go overseas. When they come back from overseas they can text me but I can't return their text. This has happened 3 times now with 3 different people. I have tried deleting and adding their number and entire contact again, added and deleted the +61 before their number.
    One of the people's text came to me from their @icoud name but they were actually sending it from their phone and the phone setting said they had sent it from their actual telephone number.
    When i tried to reply it bounced back but when I returned text to their @icloud address it went through as a normal text and ended up their conversation thread from me.
    As I mentioned its only happened to people who have been overseas and then come back to Australia.
    Very confusing - any ideas anyone.
    thanks Craig

    Sorry it took me so long to write back, But unfortunately this didn't help my issue.
    My uncle and I did a lot of tests on this computer and have narrowed down the location of the problem a little bit.
    We tried to first reset the SMC and the NVRAM as suggested, but the only thing that did was make the fans run on full tilt for the first session after restarting it for some reason. After that we tried re installing OSX over the OSX that was already on the system (not removing any of the files). This also didn't do anything but make refit stop working. Then we moved onto the next task at hand by removing the hard drive entirely and booting it as an external drive from one of the USB ports... as long as you booted it with the options key held down, it worked perfectly fine. Then we put an alternative hard drive into the computer and installed OSX on that. This time there was no trouble booting anything up. Everything seemed to work flawlessly. So we made a backup of my original drive (OSX, Windows, and all) onto an external hard drive and tested booting to it via USB. That again worked perfectly fine and booted right up with no problems. So after that we formatted the original hard drive and reinstated OSX. We then proceeded to transfer all the old files from the backup onto this new installation and LOW AND BEHOLD..... we were back to square one with it refusing to recognize the hard drive again.
    So this basically told us that there appears to be something either wrong with the hard drive, or something got really screwed up in the software along the lines and by me copying all my old files back over, I just ended up bringing the screwed up file back over with it! (despite not copying over any settings of any kind) So I am still extremely confused as to what is going wrong... did some boot sector possibly get screwed up may be?

  • HDMI output cuts out and then comes back, any ideas?

    Hi all.
    I have a two Dell U2412Ms connected to my MacBook Pro Retina. One is connected via a Displayport connection and the other via the HDMI. I used to have them both connected to the Displayport conenctors but have recently run a cable into my office and now have the ethernet dongle connected to one of the Thunderbolt ports.
    Since connecting a screen to the HDMI port, I've noticed that it does something odd from time to time. The screen connected to the HDMI port will go off for a couple of seconds, and then come back on again. It tends to only do this once per 'session' of me using the system. Most times when the screen comes back on, it is fine - but once it came back on the screen was going bananas. It appeared to be mostly grey, but looking closer revealed that all the pixels were going nuts, like a swarm of flies - and there was all sorts of colours going on! I had to unplug the HDMI connection (which caused my windows to move around) and then reconnect it, and then it was fine.
    This only happens when using the HDMI port, and is not the monitor at fault - I eliminated it by swapping the screens over so that the other one was using the HDMI .. and it still happened!

    As it turns out, the USB failed. The Apple people kept my PB and sent it for repair.
    I dropped by the genius bar and left it with them on Dec 14 being told it would take 10 business days or so to get it back.
    My trackpad button was very stiff, it stuck and had to press harder than normal to click. This was in effect since I took it out of the box when I bought it. Never bothered as I use a Bluetooth Apple mouse. Now that they kept it for repair for the USB port, they will also fix the trackpad.

  • Photoshop cs6 error "could not use the type tool because the target channel is hidden.  happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point

    photoshop cs6 error "could not use the type tool because the target channel is hidden.  happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point.  i really need to get thsi figured out. thank you.

    You may have answered my question. I AM using the 64bit version of Illustrator CS6. I had no idea there were bugs in it that affected paths copied and pasted from Illustrator to Photoshop.
    A bit more about what I'm trying to accomplish... I'm trying to follow Deke's tutorial (http://www.deke.com/content/dekes-techniques-018-creating-a-3d-pie-chart) which is already difficult since so much has changed between CS5.5 and 6, but then on top of that, I keep getting errors!
    So I created the pie chart exactly as he shows and copied and pasted into Photoshop exactly as he does. Before submitting this post, though, I tried drawing just two very simple triangle shapes, copying them both and pasting them into Photoshop as a shape layer. The shapes weren't overlapping, but they were a part of the same shape layer just like the pie chart tutorial.
    Thanks for your help. If there is anything else I should try before just giving up because of the 64bit bugs, please let me know.

  • The jpegs in my movie start in focus then quickly go out of focus, and then come back to focus just as the clip ends

    The jpegs in my movie start in focus then quickly go out of focus, and then come back to focus just as the clip ends

    Viewed in FCP or after export?
    Russ

  • Iphone 4 will not start up...the apple icon comes on and then goes off and then comes on and goes off again continuously....any ideas?

    Iphone 4 will not start up....the apple icon comes on and then goes off and then comes on and then goes off continuously....any ideas?

    1. Try doing a hard reset:
    Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
    2. If that doesn't solve it, use: http://support.apple.com/kb/HT1808
    Using this article will erase everything on the device, so make sure you have a backup!
    If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
    Good luck
    JW
    Message was edited by: jesterwylde

  • My Macbook pro 1,2 monitor and laptop screen goes black once in a while and then comes back on

    Hello all,
         Thank you very much for taking the time to view my issue. This issue just started about a month ago, I have a 22" LCD Monitor that I have been using, when this issue started the monitor would flicker and the screen would go black, but if I turned it off for a bit then turned it back on it would come back on. After a while it just started to go black and not come back on at all, so I decided to disconnect the monitor and use the notebook screen, I thought the monitor itself was broken. The notebook screen was working fine up until the last week, it is now doing the exact same thing, when my computer wakes up from being asleep it sometimes flickers then goes black, I can still faintly see the outline of the programs I have up but it is completely black. Sometimes it is a pain to get back on and I have to force shutdown and turn it back on to get it working. I am not sure what the problem is but I really want to get it fixed.
    My Macbook Pro 1,2 is the first model made, but it was the best model available at the time. It has a Intel Core Duo 2.16GHz chip with 2GB of ram and a 160GB hard drive, it also has an ATI Radeon X1600 video card with 256mb of Vram. If anyone has any suggestions or resources I can use, I would greatly appreciate you sharing them with me.
    Thank you very much in advance!
    Sincerely,
    Saggz.

    Hey Fleurdemimi,
    Thanks for the question. I understand you are experiencing issues with your iPhone 4s. Based on the information you have provided, restoring your iPhone in recovery mode may resolve your issue:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • My 27in LED monitor goes black, pops then comes back on

    Brand new 27in LED monitor goes black, popping sound comes from speakers (I think) then comes back on. Plugged into my brand new Macbook Pro 2.2 GHz i7. Unplugged every thing and it still does it. Has most recent firmware. Just started after five days of ownership. Do I need to take it back to the Apple Store?
    JBP

    Had a second-hand TV once (I am cheap -- sue me).  One day the screen went fritzy and the room smelled of ozone.
    Ozone is a big clue with regards to electronic equipment.

  • X-Fi Xtreme Audio - Volume goes low, static, then comes back.

    Hi all, I have a problem that just developed with my sound after 3 years of owning this PC. Is this the infamous static problem with the card or something else I can fix? Thanks.
    I was playing a game the other day when the sound 'cut out'. If I turn the volume on my speakers up louder I can sometimes hear what should be playing, it's very quiet and sometimes distorted. There is also a loud hiss and static when the volume is at standard levels whilst the sound is doing this. Sometimes I can't hear anything if I turn it right up even, it's just the static.
    There have been the odd pop, crackle and even strange noise coming from it on occasion over the last few days.
    After a while it just decides to go back to normal and will work for a while and then do the same thing again. Will happen when playing games or even just on the desktop (listening to music to test this)
    I have unplugged my speakers (2 desk speakers with subwoofer) and put headphones in, they are doing exactly the same thing so it is not the speakers.
    I have updated the drivers. No change.
    I'm baffled. Sometimes even restarted the computer doesn't fix it, it just decides to work again.
    It's almost like it's getting inteference or picking up a staticy radio, and then cuts out again, but obviously i know that's not what it's doing.
    Any solutions or am I looking at buying a new sound card here?
    I'm not using two gfx cards, and the mobo is ASUS p5n-e sli. I have an Nvidia Geforce 8800 GTS gfx card.
    Any other info you need let me know, thanks in advance.
    Oh and I believe it's in PCI. Not PCI-E.

    @Re: X-Fi Xtreme Audio - Volume goes low, static, then comes backu Hi
    Did anyone solve this - I have started getting exactly the same problem today. There is a fairly loud pop and then the sound that normally should be coming form the machine (game or music) is very quiet and distorted. After a short while (a few minutes), it pops again and starts working again. I built this machine a few months ago and this is the first time that I have had this issue. The specs are as follows:
    XFX ATI Radeon HD 5870
    Asus P6X58D Premium Intel X58 Motherboard,
    Intel Core i7 920 D0 Stepping 2.66Ghz (Nehalem)
    Corsair XMS3 6GB (3x2GB) DDR3 PC3-2800C9 (600MHz) Tri-Channel
    Hitachi Deskstar 7K2000 2TB HD
    Intel X25-M Mainstream 80GB SSHD
    X-Fi Fatalty FPS
    The X-Fi card is from my old machine and it worked perfectly in that one.
    Many thanks,
    Dave

  • TV Screen goes blank, pixilates, then comes back

    We have 2 sets out of 4 that will pixilate, go blank for 5-10 seconds then come back.  It is very intermittent, may work fine for hours then will do this for several hours.  All cable connections are tight, tv's are new.  Any other ideas?

    Fishermanwr wrote:
    We have 2 sets out of 4 that will pixilate, go blank for 5-10 seconds then come back.  It is very intermittent, may work fine for hours then will do this for several hours.  All cable connections are tight, tv's are new.  Any other ideas?
    Try swapping the connections at the splitter:  The 2 pixilating ones with the 2 that are OK.  See if the problem goes with the switch.  If it does then it's the splitter.  By the way this is strictly a guess.

  • My screen goes from large to small in safari. also disappears than comes back. goes to desktop and then comes back.

    I am having an issue when using safari. My screen goes from really large to normal. The screen also disappears and I get to the desktop with the small screens on top. Then I get the dock (I believe) with the calendar, time, weather, ect. Mouse goes crazy whether using the track thing or a regular mouse. Doesn't happen all the time but most of the time. Also the computer feels really hot to the touch.

    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

Maybe you are looking for