CPU help MSI K7T Pro ms 6330

will a  AMD MOBILE ATHLON 4 1.2GHZ 200FSB AHM1200AQQ3B work on this board msi k7t pro ms 6330 ver 2.1

i dout it ,but to say no for sure you will have to try
its certainley not one msi ever tested in it

Similar Messages

  • Msi k7t pro MS 6330 - best graphic card

    hello gentlemen
    As announce subject I am k7t pro ver1 owner. Nowadays the MB is provided with riva tnt2 model 64 - yeah it is old one. I would like to change the graphic card, up to the good one. So is there any graphic card you know may be recommend? Some VGA x4, having best technical parameters to the mainboard?
    Kongo

    thanks for reply
    sure, I do not intend play newest games, anyway I wish to play hitmanII, or III and IGI-2 - some ! The MB I have is retired. Max CPU to the MB is 1.2G Athlon - and I fited out with it (1.2 Athlon). Power suply is powerful 350W of good make; also 448 sdr sdram is going to be. I just do not know if Geforce 4 will be suported by the MB. AGP port is 4x only.
    Man, did I  well anderstand you? You mean that if I plug in 8x graphic card the system wil be stable? Ex. MSI GForce 4 Titanium 4200 128DDR? And will work fine on the MB?
    Anyway I wish to plug in as good as possible (or something about) graphic card...  so are there any  suggestion ?
    Kongo

  • Problem with K7T Pro (MS-6330)

    I've been used MSI K7T Pro (MS-6330) for 2 years and it worked just fine. But recently the problem occurred. After I've upgraded CPU from Duron 600 to TB 1.2 GHz, when I run a heavy-loaded application such as 3DMark, 3D games (UT2003) my computer will stop working (IMO: my case just like the classic K7T Pro) but when I touched the SC1155 chip, it just warm (it won't burn my finger). So I'm confused that is my mobo defected or not?
    Oh, almost forgot .. my mobo was modified and can adjust multiplier.
    FYI:
    I've tried underclock CPU to 950 MHz and I've found that 950 work fine (or at least it use very long time to run full-loaded and then die). Once I forgot to plugged electric-cable for my heatsink fan and temp goes 66-68C and still working normally (not running 3D app.)
    So, can anyone suggest me what is the problem with my mobo?
    Thank you very much and apologize for my language  :P
    My Spec:
    AMD Athlon (TB) 1.2 GHz (but now run @950MHz) VCore 1.55 (tried 1.55-1.85 result is the same)
    MSI K7T Pro (MS-6330) modified to adjust multiplier
    250W Powersupply
    256 MB PC133
    Winfast GF2MX 32 MB
    SB Live! Value
    Lite-on DVD16x
    2 Harddisk (40GB and 4 GB)

    Hi,
    RMA the board, contact your nearest MSI office and ask for the RMA department.
    There is not much more you can do.

  • Req: K7T Pro MS-6330 and CPU

    Pls, I have MSI K7T Pro motherboard. In support page there is written that this MB supports Duron up to 1.1 GHz and Thunderbird Athlon up to 1.2 GHz (100 FSB) with a little older BIOS 314  . Is the info true and recent or are there any news on it and it supports at least Duron 1.2 GHz or higher CPU ?

    I have the MS-6330 v5.0 board Running an XP1900+ CPU (1.56GHz). The more recent BIOS images allow for higher CPU speeds, but it is important to check the version # of you board to verify the version of the BIOS falsh it can handle. With the v5.0 boards you can use BIOS v3.6 which allows 2200+ CPU's

  • MSI K7T turbo2 MS-6330 bios ver 3.6..NEED SERIOUS HELP!!

    Anybody plz help me.I own a mobo above running amd athlon xp 2000+. My system run well for one week. After dat, my system started to give me problem. It hangs one day and when i reboot my com, the message "Windows protection error. Please restart your computer" appears. I tried already many times to restarted my com..but still fails. So i think maybe RAM problem..so i try to remove and reinstall the RAM. Then my com succeed to boot into windows. Everything run ok..no problem for few days. Then suddenly my com hang again and I juz reboot my com. Then the same message appears again..May i know wat happened to my com.PLEASE HELP ME...:'(
    My spec:
    msi K7T turbo2 MS-6330 bios ver 3.6
    AMD athlon xp 2000+
    Asus v7100 Geforce 2 MX400
    2x256 kingston ram(pc133)
    2x20g maxtor hdd
    1xTV tuner card
    1XSb live soundcard

    Try uninstalling the sound card and any other nonessential components. Also, when you uninstall click on the "show hidden" items and remove duplicates. Don't remove anything that you do not know exactly what it is including any marked "unknown" but if you see multiple sound cards or cd-roms, etc. remove them. Then see if you boot ok and gradually reinstall items.

  • Were is the temp sensor on a k7t pro MS-6330

    i have a k7t pro MS-6330 and would like to know were to "system" or "case" temp sensor is as i wana make sure it is not reading falesly (hiden behind a ribon cable etc (may be the msi H/G coul help)
    cos i needed to know the anserw
    ( i've looked for it but dont even know what to look for ? )
    please help someone!

    An Athlon XP could run in your board but it would only run at about 75% of it's clock speed due to the fact your board doesn't support 266MHz FSB.
    Officially you should only use a Duron1300 or old Athlon 1400/200 if you could still find one.
    A 250w PSU could limit you depending on the rest of your hardware and the exact model/ratings of this PSU.

  • MSI K7T Pro 2-a

    Alright, I have an MSI K7T Pro 2-a (not 266) and I need to see if anyone has had this problem before. The board started giving me this crazy error about the floppy drive so I ordered a new bios for it. Now it will post video fine, but 10 - 15 seconds after post it will just crash. I have tried a number of CPU's (duron 700, duron 1.1, tbird 600, tbird 1.0) and they all do the same thing. My next step is to get an RMA and just send the board in, but I figured Id see if the forum could help before I went through all the trouble.
    Thanks,
    Dmcanally

    never really seen a trend with that board
    http://www.msi.com.tw/program/service/forum/search.php?boardid=13&searchid=1&showposts=
    will get you most posts re it to read

  • Msi k7t pro auto re(boot)

    hi , ive got a msi k7 t pro and sometimes when i am gaming then my pc shuts down , and while it is booting 4 dleds , then i have to wait sometime before i can boot again , or reset cmos , it is mostely when i play halflife for some time , or after 20 seconds of warcraft 3 ,
    specs :
    amd 1400
    geforce 2 pro
    msi k7t pro ms6330
    256 kingston , 128 samsung sdram
    creative soundblaster live
    cpu temp 45
    case temp 30
    in the summer the reboots are the most  :(

    See this topic:
    http://www.msi.com.tw/program/service/forum/index.php?threadid=75&boardid=13&page=1
    You probably have the same problem.. I have it too :(
    Good luck,
    Faachman

  • MSI k7T Pro 2A

    Anybody can tell me what is the maximum CPU speed can my MSI k7T Pro 2A motherboard poddibly support with the latest bios and drivers?

    socrates,
    Since you have a KT266 Motherboard and you posted in the nVidia/AMD/SiS Motherboard Forum, I moved the thread to Via Forum for you.
    Good Luck,
    Richard
    P.S. Here is the CPU Support Table for your Mobo:
    K7T266 Pro2-A CPU Support Status

  • Msi k7t pro and hdd crash

    Hi.
    I have a problem and i hope some of you can help me.
    I have msi k7t pro and maxtor diamond max plus 8. disk crashed before few days after using it 3 months. Before that i had maxtor 540 series and he crached after 18 months of use.
    Two disk had spin up and seek time problems. Whell at least siguardian "sad that".
    Could this hdd crash be from nonquality disks or the could be caused from some other part of pc.
    And now i have option to chance maxtor with seagate.
    What do you thing about seagate disks.
    thanks  

    a poor psu is all i can think

  • K7T Pro (MS-6330) BIOS freezes

    Hello world!!!
    my old PC (MSI K7T, AMD 650 MHz, 640 MB RAM) has worked fine until 4 days ago.
    I switched off and from now I cannot switch on anymore.
    Th 4 LED's stay always red, that means either CPU problm (???) or lithium battery problem.
    I changed the battery (was almost discharged) but I cannot boot.
    Any idea, tips, hint??
    I have tried 3x to reset CMOS, still no success
    Thanks a lot!!!

    "How about this one, married to a Phenom X3 processor:
    http://www.msi.com/index.php?func=prodcpu2&prod_no=1612&maincat_no=1
    My guess it is about 100 $. A Phenom X3 about 150 $. And some memory too: Corsair TWIN2X PC6400 DDR2 2GB KIT CL4, 40 $ maybe."
    Except for the processor there are chances you wont need a new PSU for the above. Suspect however you are in the upgrading mood, which points towards a new hard disk and DVD-burner (to house the videos you make) so allow for a Zalman PSU in your budget, too.   
    And a little off: Thank you, Svet Bosskov-killer for the back-up and information!
    Mid a dodification: Was supposed to be a link in there, but got lost in translation. And misspelt last name.

  • K7T Pro (MS-6330)

    I have a k7t pro and I want to get an athlon xp 1500+ in it. I know its not going to use the full potential of the processor but it is cheaper than an amd athlon 1.2 tbird.
    I was running an amd x 1800+ on it before because i got it in a pulled system for free. it worked fine but will a 1500+ work stabily?

    Dear Assaf !
    'Since the K7T Pro only supports 200MHz FSB an AXP 1500+ (1333MHz) will only run at 1000MHz.'
    This is true if you don't modify the processor.
    On the other hand if you unlock the processor (paint the L1-bridges), paint/cut the L10 bridges and change the multiplier, then you can run the CPU at it's full speed.
    I am currently running a XP1800+ (1533MHz) on a K7T Pro2 board with 102MHz FSB and a mult. of 16 (8 in BIOS +8 by CPU) at 1.63 GHz.
    Regards,
    /ErnyH

  • Help msi x58 pro e raid 0 my hardisk not detected

    msi x58 pro e
    intel i950 3.06g
    kingston memory 3x2gig
    video card xfx ati hd 5830
    2x 500gig wd hardisk
     my problem is when i set it up using raid o..my motherboard cant detect my hardisk...after i go to raid 0 set up then exit to install windows 7..my board woudnt detect the hardrive

    Did you use the instructions in the manual to set up the Raid?

  • K7T pro (MS 6330) what is the highest CPU I can use?

          I currently have a Duron 650 and the manual says that I can go up to ~1.3 Ghz. However, the CPU compatibility chart has an N/A beside anything higher than 1.2, even if it has a 100 FSB.
          So my questions are: what is my limit, am I limited by a 250 watt power supply, does Athlon Thunderbird have much over the Duron, and will I see much difference from my 650 Duron?
          I assume that the CPU has to be FSB 100 so Athlon XP or MP are out.
          Thanks for any help.

    An Athlon XP could run in your board but it would only run at about 75% of it's clock speed due to the fact your board doesn't support 266MHz FSB.
    Officially you should only use a Duron1300 or old Athlon 1400/200 if you could still find one.
    A 250w PSU could limit you depending on the rest of your hardware and the exact model/ratings of this PSU.

  • MSI K7T Pro MS6330 board

    Unable to determine what is the largest cpu it can support. have bios v2.9
     Also does any one know were can i find out what changes where done with my v2.9
    Any help much appreciated.
    Thanks ssilent11
    I should have tried search engine first, sorry.
    Found the answer there, thanks wonkanoby
    regards
    ssilent11

    1.2GHz Athlon (12X100) is the highest cpu you can go with this board. Also bios v.2.9 is good. No need to flash, as higher biosies for faster cpus are for different models (K7T Turbo).
    After my opinion, 2.9 is the best bios for this mobo. If you have low rpm cpu fan, then bios v.3.4 is for you.

Maybe you are looking for

  • How to stop syncing Contacts with mobileme

    I don't know why but I keep getting a 'Sync Alert' saying that Mobileme wants to change more than 25% of my contacts. When I look at the details it has all these people I barely know and it there is no other contact info attached to their name. For t

  • Okay so I broke my old laptop and I had PSE on it! I don't have the serial number anymore

    as it was thrown out with the case by my brothers I just have no clue what to do from here the product came with my Wacom Bamboo Capture tablet (I think it was 7)

  • JBO-27122: SQL error during statement preparation.

    Hi, I am trying to develop a VO for validating date. The Vo query is as follows: select count(*) startDateValid from dual where (trunc(sysdate)- to_date(:1)) < NVL(fnd_profile.value('SGX: IPP CONTRACT START DATE WINDOW (DAYS)'), 0) I initiate the VO

  • SRP547W dropping ADSL every minute

    We installed one of these devices as our gateway a couple of weeks ago, flashed the firmware to 1.2.4(003) and it worked perfectly until this morning where it keeps resetting the ADSL every minute and losing the web interface to the unit. The log end

  • MDX Formulas

    Are MDX formulas used only in ASO cubes or we can use it BSO as well. I looked into the Essbase DBAG, But could not find the right information. If anybody know about this, please clarify. Thanks for the Help in advance..........