CPU hits 100% when I quit iTunes

Whenever I quit iTunes, the it pegs the CPU at 100% for 20 - 30 seconds. I've seen lots of people with CPU-hogging problems during podcast updates and ripping... anybody find an answer for this one?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Mac forums.
Regards.

Similar Messages

CPU hit 100% when installing Solution Manager

During the installation, it hang at phase 34 (Start JAVA Engine) of 43. The description at bottom written :
"Starting SOL/DVEBMGS00 [ABAP:ACTIVE, Java:UNKNOWN]. Elapsed time:9:00 minutes"
When i checked the task manager, the CPU usage was shot up to 100%.
Please advice what can i do?

Which process is using that CPU?
Markus

Oracle Database 11.2.0.1.0 CPU hit 100% on Windows 2008 R2 64 bit Hyper-V

Oracle Environment Detail:
Oracle Database Enterprise Edition :11.2.0.1.0 (NON RAC, No failsafe)
O/S:     Windows 2008 R2 64 bit (6.1)
Specifics: Virtual Server using Hyper-V
Memory: 9 GB RAM
Processor: E5540
Specific about the issue:
I have two database instance created on this server with ‘memory_target=3600M’ each.
I am getting into an issue where I find NO activity on database except regular schedule job running using DBMS_SCHEDULER –
•     Database FULL export DAILY schedule time 7 & 7:30 PM accordingly for both instance (takes about 15-20 mins each)
•     Database FULL RMAN DAILY schedule time 9 & 10 PM accordingly for both instance (takes about 35-40 mins each)
This was set up on Feb 25th 2011. Since then we have encounter CPU hit 100% TWICE in this system at around 8:30 PM (SAME TIME). Both database instance exports keep running and never finish. While RMAN schedule job has NO problem. Mostly everything runs every smoothly without any issue.
Replicate the issue:
I am unable to replicate this issue and do not know the cause of the issue.
Work Around:
Oracle services shutdown/Server reboot.
Would anyone know about this issue? Have any information could help? This system will become production soon and want to make sure we have solution for this.
Thanks in advance!

I am finding that CPU hit 100% is very specific to Oracle 11.2.0.1.0 Export Utility (exp) used to take FULL database export. I understand Original Export is desupported from general use as of 11g but available for specific need.
Have anyone faced this issue with 11.2.0.1.0 Export Utility (exp)? Please help.
I have a need to use export utility which gives us migration options.
Thanks!

When I quit itunes it restarts again with the dot under the itunes logo but the iTunes window doesn't open until I click the icon on the dock. Also in the middle of the size vale in the size column the value starts with a number then a ? then a number.

When I quit itunes it restarts again with the dot under the itunes logo but the iTunes window doesn't open until I click the icon on the dock. Also in the middle of the size vale in the size column the value starts with a number then a ? then a number.

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Mac forums.
Regards.

My CPU usage jumps to 100 % when I use iTunes 10.6.1 -using Windows XP Service Pack 3

When I open itunes 10.6.1 my CPU usage jumps to 100%. it started doing this about 6 months ago when I updated itunes.

This helped me. You should try it. Now I can run itunes or Safari and my CPU usage is around 22%.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Why My Cpu is getting at 100% when I open ITunes? (Memory problem)

Good day everyone,
Why is my CPU getting at 100% eating over 700 000k of ram as soon as I open Itunes?
Even if I'm closing the process it reopens automaticly and take all the memory...I am under Windows Vista (Family ed.) and I have the latest version of ITunes...
Thank you for your help!
Regards,
Dominique

It worked for me, for iTunes Store and Safari both!
amandav2 wrote:
I found a solution to my problem.
> start menu
> accessories,
> right click on the command prompt icon and choose "run as administrator".
Once it opens, type in the following command...
netsh winsock reset
hit enter
You should get a message that the winsock reset successful and you will need to reboot your computer.
Reboot and when I reloaded itunes the store loaded fine.

CPU Hitting 100% +Screen flickering/Flashing

Hi folks, i wanted some help with a problem i started having recently!
My processor seems to be hitting 100% for about 5secs or until that precise folder with .mp4 files fully loads up (when i access .mp4 files), but when i convert them, the screen just flashes/Flickers, until conversion finishes.
I installed Need for speed undercover on my laptop 2months back, ive played it, and now i try to play it the screen flickers once, twice, and it minimises soon as i start to play the game, when i click on the tab again it'll come up for about a minute of my gaming time, and then same problem again it loads up fine, only at times when it loads up this happens, but most the time it's when i start playing the game, due to that i cant exactly play that game no more, until i get this problem fixed.
The system remains quiet but the processor hits 100% and then the problem starts.
what could the problem be???
i would be grateful for any help given.
Thanks

I rang up Toshiba, and it turned out to be the graphics chip problem.
This model had this problem because the bios settings were not correctly set therefore causing the computer a lot of strain.
Laptops with this problem have an extra year of warranty.
Anyhow problem is now sorted; they had to change the motherboard to sort the whole problem out because the chip is soldered onto it.
Thanks

CPU runs 100% when logging with DAQmx using card 6229

Hi!
When I start a logging using DAQmx Analog Input the computer CPU runs 100%. This causes the problem that the computer locks and the subsequent steps in the program are left without computer CPU recourse. After the logging is compleet, 1750 samples/10 channels at 250Hz, the program runs on, but the loggfile is at that point useles.
I have instaled LV 7.1.1 and am using DAQ 7.4.
Anyone that recognizes this problem?
Regards,
Idriz
Idriz "Minnet" Zogaj, M.Sc. Engineering Physics
Memory Profesional
direct: +46 (0) - 734 32 00 10
http://www.zogaj.se

Hello Idriz!
I just wanted to respond here as well so you know that we have read your post on this very forum. Still waiting for an answer from the US and after that I will forward that information to you.
Regards,
Jimmie A.
Applications Engineer, National Instruments
Regards,
Jimmie Adolph
Systems Engineer Manager, National Instruments Northern Region
Bring Me The Horizon - Sempiternal

When I quit iTunes it opens itself again

Hi
I'm using iTunes Version 6.1.5 (8537.77.4) and when I quit it, it opens itself again.
Can this be fixed?
Thanks.

I can't quit iTunes anymore.
The only way is when I close iTunes Helper first via Activity Monitor, and then iTunes.
Any help appreciated.

Problem when I quit iTunes

Hi there,
I'm facing the following problem when I quit from iTunes:
A message appears telling me that iTunes quit unexpectedly and the problem may have been caused by the FX plug-in. Is there any idea how to fix this problem?
Thank you

Do you have iWOW or cover sutra installed?

JVM 1.4.x IE 6 CPU utilization 100% when issue window.print

I am using JVM 1.4.2_04, IE 6 and WinXP Pro.
When visiting internet application having applet initialized, and click the PRINT link (window.print()), suppose the print dialog box will be shown, however, the CPU utilization draw up to 100% and the dialog cannot be shown over 10 minutes.
I had tried with 1.4.1_x, the same result found.
If using 1.3.1_x on the same application, no problem found, can anyone help.

case solved, which is due to the bug_id 4942346

WebProcess at 50% and CPU at 100% when using Illustrator CS5...

Hello there !
First time at this so I hope I provide every detail needed...
I searched for a similar issue without finding the exact problem elsewhere.
I have a MBP mid-2009 running on OSX 10.7.4 and updated Safari recently to version 6. Everything works perfectly except when I use Illustrator CS5, the WebProcess gets up to 50% in average, my CPU gets owned to a 100% as my fans spins near 6500 rpm in less than 2 minutes...
Any ideas ?
Thanks for your concern !

Hello Idriz!
I just wanted to respond here as well so you know that we have read your post on this very forum. Still waiting for an answer from the US and after that I will forward that information to you.
Regards,
Jimmie A.
Applications Engineer, National Instruments
Regards,
Jimmie Adolph
Systems Engineer Manager, National Instruments Northern Region
Bring Me The Horizon - Sempiternal

CPU at 100% when starting Premiere Elements 10

Hi,
When I start Premiere Elements 10 the program runs at 100% CPU usage. Even when I haven´t opened a project yet. So it is not caching media or something. On the screenshot below you can see my problem. There is no project open but the task "Adobe Premiere Elements.exe" is running at 100%.
This makes my system very slow and instable.
I have a 2GB Pentium D 3.0 GHz and my harddrives have lots of free space (They are not working very hard when using Premiere).
Can anyone help me with this?
Dimitri

No, it doesn't barely meet the tech requirements (regardless of Adobe's suggested minimums). It is not adequate to work with this program.
With only 2 gigs of RAM, the program is not only idling but also doing a lot of paging. And, if you've got less than 30 gigs of clean, free, defragmented space, it's also struggling with defragmentation.
It's also possible the Organizer is auto-analyzing your drive and if you've got other programs running in the background (like a live defrag program or an intrusive antivirus program like Norton or McAfee) that could be contributing to the problem.

When I quit iTunes, it relaunches. Why?

If, after a while away from the Mac, maybe it was asleep, I launch iTunes, then quit it. It re launches all by itself.
If I quit it a second time it stays quit.
I think this only happens if iTunes is configured to launch when an iPod is connected.
However, it does this even if no iPod is connected.
I'm using v5 now, but this happened with v4 too.

lots of iTunes helper apps reopen iTunes. I sometimes use one called MyTunes, and it reopens iTunes.
I'd suggest that anyone who has the problem of iTunes reopening "itself", disable or quit any and I mean any apps that they use with itunes. More than likely that's the problem.

NIScope CPU usage 100% when waiting for trigger

Hello, I'm using a NI 5102 DAQ card and want to acquire single bursts. However when the Multi Fetch.vi is waiting for a trigger (and this can be up to a minute) the CPU usage goes up to 100 %. Is there any way to overcome this?
Attachments:
Current_ProjectSWEEP2withoutAgilentNEWScopeWrite_to_FilePOSTED.vi ‏98 KB
ScopeSUB.vi ‏108 KB

Yea, Ive noticed the same thing. The niSope dll in the Fetch.vi grabs 100% CPU if timeout is larger than 1 or 2 seconds.
Has anyone talked to NI about this? The problem is in that dll which is polling the PCI Scope Card. That dll is not giving back any CPU if it waits for more than a second or two.
John Dailing
[email protected]

CPU hits 100% when I quit iTunes

Similar Messages

Maybe you are looking for