Cpu idle percentage

Can someone help me out in finding the System's Idle Process time or System's Idle Process's memory usage for windows.
(Which we can see in Task Manager)
Even after installing service pack 2 there in no 'pstat' installed. Any Idea??
I dont think any ready methods available and i am also new to JNI programmining.
Kindly help me out,
Thanks,
Muthu

Is there any other way to do.
I found that pstat was like tasklist which provides the list of processes running.
I need a method to find the cpu usage of the processes.
I could find the RAM sapace each process is occcupying but not the CPU usage time. Any idea..?

Similar Messages

CPU Idle Percentage Near 90 -- Beachball City.

{Sigh}
Slow, slow, slow.
Approximately one month ago I upgraded from Tiger to Snow Leopard. My iMac has been sluggish to slow since. The context/problems/actions
There are three accounts on the computer. A root, a system administrator, and a guest account. The problems are much more pronounced in the System Administrator account than in the Guest account. (In hopes of resolving a Snow Leopard install Filevault issue I deleted a System Administrator account and shortly thereafter recreated it, using its original name.)
Put short, the beachball is a frequent visitor whether using Safari, Text Edit, Finder et al. Additionally, logging out of an account takes much more time than it once did: approximately three minutes to log out.
As to Safari -- slow to launch, slow to load pages. Two-five minutes to visit one page.
What I have tried
1) Checked Activity Monitor --- Percentage CPU of Safari and others is often at less than one percent. The CPU idle percentage is often in 90% range.
2) Compared the DNS of the guest account and sys adm account --- Identical.
3) Uninstalled Flash Player.
4) Checked Disk Utility --- Verified disk. Errors found. Then through Snow Leopard Install Disk, repaired the Disk. Rechecked. No errors found.
Additional info if helpful --
1) The HD is size is 150 GB, only 30 GB in use.
2) Two GB of Ram; one GB is listed as Free.
Day to day tasks are almost impossible in the sys adm account. Please help.
Yours,
Lxloco

Thank you Lyssa, Pondini, and The hatter for taking an interest.
I took some time away from rooting against the Steelers to do some of the homework mentioned above.
1) File Vault file -- Isn't on this HD; hasn't been on this HD for a couple of weeks. Rather, the file (the sparse bundle) was saved on an external and then deleted from this iMac's HD
2) Smart Utility HD Check -- Results: "Failing;" what's more: "Pending Bad Sectors: 1." Continuing on, "Completed: read failure;" "Remaining 90%;" and "LBA of First Error: 101643935."
3) System Log --- "Insert-Hang-Detected." This untrained eye takes immediate note of that message. It is most frequently associated with Safari, Safari Webpage Preview Fetcher, and Mail. An occasional "Query-Hang-Detected" is also spotted.
4) System Preferences - Login Items --- Only one item reported: A Lexmark Printer that was removed several years ago.
Trying to help myself, elsewhere I read something about a "Performance Update 1.0" from October 2009 and how it could have ameliorated "Insert-Hang-Detected" problems. Yet, when I review the webpage for that Update I fail to see my iMac's model number listed.
http://support.apple.com/kb/HT3901
Lastly, I will attempt to copy and paste excerpts of the system log. I hope this works and offers insights.
*EXCERPT ONE*
Feb 6 01:39:33 lxlocos-computer com.apple.launchd.peruser.501[136] (com.apple.Kerberos.renew.plist[157]): Exited with exit code: 1
Feb 6 01:41:16 lxlocos-computer WDSmartWareD[45]: Daemon Start -- User registered
Feb 6 01:44:18 lxlocos-computer com.apple.launchd.peruser.501[136] ([0x0-0x14014].se.coolbook.CPUTest[189]): Exited: Terminated
Feb 6 01:45:02 lxlocos-computer com.apple.launchd.peruser.501[136] ([0x0-0x17017].se.coolbook.CPUTest[220]): Exited: Terminated
Feb 6 01:45:08 lxlocos-computer com.apple.launchd.peruser.501[136] ([0x0-0x15015].com.apple.grapher[200]): Exited: Killed
Feb 6 01:45:22 lxlocos-computer Safari[228]: INSERT-HANG-DETECTED: Tx time:4.366120, # of Inserts: 1, # of bytes written: 118598, Did shrink: NO
Feb 6 01:45:31 lxlocos-computer Safari[228]: INSERT-HANG-DETECTED: Tx time:8.865640, # of Inserts: 5, # of bytes written: 156588, Did shrink: NO
Feb 6 01:45:34 lxlocos-computer Safari[228]: INSERT-HANG-DETECTED: Tx time:3.200036, # of Inserts: 0, # of bytes written: 0, Did shrink: NO
Feb 6 01:45:51 lxlocos-computer Safari[228]: INSERT-HANG-DETECTED: Tx time:8.405790, # of Inserts: 23, # of bytes written: 245779, Did shrink: NO
Feb 6 01:45:57 lxlocos-computer com.apple.launchd.peruser.501[136] ([0x0-0x11011].com.apple.TextEdit[173]): Exited: Killed
Feb 6 01:46:41 lxlocos-computer Safari[228]: INSERT-HANG-DETECTED: Tx time:3.748904, # of Inserts: 26, # of bytes written: 244185, Did shrink: NO
Feb 6 01:48:16 lxlocos-computer com.apple.launchd.peruser.501[136] ([0x0-0x1d01d].se.coolbook.CPUTest[242]): Exited: Terminated
Feb 6 01:49:33 lxlocos-computer /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[160]: No valid tickets, timing out
Feb 6 01:50:27 lxlocos-computer com.apple.launchd.peruser.501[136] ([0x0-0x1e01e].com.apple.TextEdit[247]): Exited: Killed
Feb 6 01:51:15 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:6.215394, # of Inserts: 16, # of bytes written: 581694, Did shrink: NO
Feb 6 01:51:34 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:5.002433, # of Inserts: 15, # of bytes written: 153168, Did shrink: NO
Feb 6 01:51:41 lxlocos-computer Safari[228]: INSERT-HANG-DETECTED: Tx time:4.232596, # of Inserts: 8, # of bytes written: 83235, Did shrink: NO
Feb 6 01:52:04 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:10.811223, # of Inserts: 2, # of bytes written: 115937, Did shrink: NO
Feb 6 01:52:14 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:5.694347, # of Inserts: 7, # of bytes written: 81588, Did shrink: NO
Feb 6 01:52:22 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:3.331573, # of Inserts: 2, # of bytes written: 2490, Did shrink: NO
Feb 6 01:52:25 lxlocos-computer Safari Webpage Preview Fetcher[264]: QUERY-HANG-DETECTED - time: 3.176528, DB size: 31385600
Feb 6 01:52:28 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:3.983146, # of Inserts: 2, # of bytes written: 589, Did shrink: NO
Feb 6 01:52:41 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:7.192635, # of Inserts: 10, # of bytes written: 201402, Did shrink: NO
Feb 6 01:52:50 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:9.396734, # of Inserts: 20, # of bytes written: 579885, Did shrink: NO
Feb 6 01:53:00 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:10.352105, # of Inserts: 11, # of bytes written: 127955, Did shrink: NO
Feb 6 01:53:05 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:4.025091, # of Inserts: 1, # of bytes written: 42, Did shrink: NO
Feb 6 01:53:14 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:5.343501, # of Inserts: 1, # of bytes written: 1191, Did shrink: NO
Feb 6 01:53:23 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:4.528598, # of Inserts: 1, # of bytes written: 13800, Did shrink: NO
Feb 6 01:53:37 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:3.819838, # of Inserts: 0, # of bytes written: 0, Did shrink: NO
Feb 6 01:54:03 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:4.588173, # of Inserts: 7, # of bytes written: 80110, Did shrink: NO
Feb 6 01:54:17 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:3.210238, # of Inserts: 2, # of bytes written: 14358, Did shrink: NO
Feb 6 01:54:29 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:5.436849, # of Inserts: 6, # of bytes written: 205449, Did shrink: NO
Feb 6 01:54:47 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:3.471765, # of Inserts: 37, # of bytes written: 279087, Did shrink: NO
Feb 6 01:54:56 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:7.150560, # of Inserts: 2, # of bytes written: 14807, Did shrink: NO
Feb 6 01:55:07 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:8.734574, # of Inserts: 13, # of bytes written: 166086, Did shrink: NO
Feb 6 01:55:13 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:5.456079, # of Inserts: 3, # of bytes written: 49535, Did shrink: NO
Feb 6 01:55:27 lxlocos-computer Safari Webpage Preview Fetcher[264]: INSERT-HANG-DETECTED: Tx time:3.640008, # of Inserts: 1, # of bytes written: 15176, Did shrink: NO
*EXCERPT TWO*
Feb 6 14:29:44 lxlocos-computer com.apple.launchd.peruser.0[872] (com.apple.Kerberos.renew.plist[899]): Exited with exit code: 1
Feb 6 14:29:44 lxlocos-computer storeagent[903]: port created
Feb 6 14:29:50 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:12.314055, # of Inserts: 0, # of bytes written: 0, Did shrink: NO
Feb 6 14:30:18 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:20.604123, # of Inserts: 1, # of bytes written: 1212620, Did shrink: NO
Feb 6 14:30:26 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:15.947163, # of Inserts: 0, # of bytes written: 0, Did shrink: NO
Feb 6 14:30:41 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:6.006698, # of Inserts: 0, # of bytes written: 0, Did shrink: NO
Feb 6 14:30:42 lxlocos-computer com.apple.fontd[887]: FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
Feb 6 14:30:54 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:8.966403, # of Inserts: 10, # of bytes written: 96834, Did shrink: NO
Feb 6 14:31:02 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:6.418564, # of Inserts: 4, # of bytes written: 27111, Did shrink: NO
Feb 6 14:31:20 lxlocos-computer iCalExternalSync[931]: [ec20] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
Feb 6 14:31:20 lxlocos-computer Dock[880]: [65dc70] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
Feb 6 14:31:20 lxlocos-computer [0x0-0x81081].com.apple.iCal.helper[0]: 2011-02-06 14:31:20.557 iCalExternalSync[931:903] [ec20] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
Feb 6 14:31:29 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:23.337264, # of Inserts: 3, # of bytes written: 37225, Did shrink: NO
Feb 6 14:31:35 lxlocos-computer com.apple.fontd[887]: FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
Feb 6 14:31:39 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:3.584134, # of Inserts: 8, # of bytes written: 118906, Did shrink: NO
Feb 6 14:31:50 lxlocos-computer Dock[880]: [65dc70] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
Feb 6 14:31:50 lxlocos-computer iCalExternalSync[931]: [ec20] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
Feb 6 14:31:50 lxlocos-computer [0x0-0x81081].com.apple.iCal.helper[0]: 2011-02-06 14:31:50.710 iCalExternalSync[931:903] [ec20] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
Feb 6 14:32:20 lxlocos-computer Dock[880]: [65dc70] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
Feb 6 14:32:20 lxlocos-computer iCalExternalSync[931]: [ec20] |Server|Warning| failed to connect to the server: NSPortTimeoutException [NSPortCoder sendBeforeTime:sendReplyPort:] timed out (318713540.862623 318713540.864886) 1
Feb 6 14:32:20 lxlocos-computer [0x0-0x81081].com.apple.iCal.helper[0]: 2011-02-06 14:32:20.865 iCalExternalSync[931:903] [ec20] |Server|Warning| failed to connect to the server: NSPortTimeoutException [NSPortCoder sendBeforeTime:sendReplyPort:] timed out (318713540.862623 318713540.864886) 1
Feb 6 14:32:29 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:38.527892, # of Inserts: 16, # of bytes written: 147173, Did shrink: NO
Feb 6 14:32:39 lxlocos-computer /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Support/genatsdb[925]: GENATSDB FontObjects generated = 295
Feb 6 14:32:39 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:8.416577, # of Inserts: 2, # of bytes written: 32292, Did shrink: NO
Feb 6 14:32:44 lxlocos-computer SoftwareUpdateCheck[885]: INSERT-HANG-DETECTED: Tx time:3.905415, # of Inserts: 5, # of bytes written: 332034, Did shrink: NO
Feb 6 14:32:51 lxlocos-computer Dock[880]: [65dc70] |Server|Warning| failed to connect to the server: NSPortTimeoutException [NSPortCoder sendBeforeTime:sendReplyPort:] timed out (318713571.014017 318713571.016298) 1
Feb 6 14:32:51 lxlocos-computer iCalExternalSync[931]: [ec20] |Server|Warning| failed to connect to the server: NSPortTimeoutException [NSPortCoder sendBeforeTime:sendReplyPort:] timed out (318713571.016351 318713571.018601) 1
Feb 6 14:32:51 lxlocos-computer [0x0-0x81081].com.apple.iCal.helper[0]: 2011-02-06 14:32:51.018 iCalExternalSync[931:903] [ec20] |Server|Warning| failed to connect to the server: NSPortTimeoutException [NSPortCoder sendBeforeTime:sendReplyPort:] timed out (318713571.016351 318713571.018601) 1
Feb 6 14:33:07 lxlocos-computer iCalExternalSync[931]: Client state being vacuumed
Feb 6 14:33:20 lxlocos-computer DockSyncClient[944]: Client state being vacuumed
Feb 6 14:33:25 lxlocos-computer SoftwareUpdateCheck[885]: PackageKit: * Missing bundle identifier: /Library/Receipts/EKPD_fat.pkg
Feb 6 14:33:41 lxlocos-computer quicklookd[939]: [QL] 'Creating thumbnail - cancelled' timed out for '<QLThumbnailRequest <a class="jive-link-external-small" href="file://">file:///.file/id=6571367.4426212>' (Start date: 2011-02-06 14:33:36 -0500)
Feb 6 14:33:52 lxlocos-computer quicklookd[951]: INSERT-HANG-DETECTED: Tx time:10.756175, # of Inserts: 0, # of bytes written: 0, Did shrink: NO
Oddly enough, things are working better today. Perhaps my computer is a Packers fan?
Thanks again for care and insights.
Lxloco

No Server Name displyed in mail notification Alert generated by "total CPU Utilization Percentage is too high" Monitor

Hello Everyone,
I need your assisstance in one of the issues with Mail Notification Alert generated by SCOM.
Mail notification received as below:
Alert: Total CPU Utilization Percentage is too high
Severity: 2
ServerName:Microsoft Windows Server 2008 R2 Standard - The threshold for the Processor\% Processor Time\_Total performance counter has been exceeded. The values that exceeded the threshold are: 97.091921488444015% CPU and a processor queue length of 16.
Last modified by: System
The Alert was generated by "Total CPU Utilization Percentage"
But the problem with the above mail notification is it doesn't mentions about the affected server. So I would like to know how to tweak the monitors to provide the server name into it.
Thanks & Regards,
VROAN

Hi
You can add alert source to the email format in the scom server.
refer below link for parameters
http://blogs.technet.com/b/kevinholman/archive/2007/12/12/adding-custom-information-to-alert-descriptions-and-notifications.aspx
Regards
sridhar v

Random???? CPU idle temps boot dependent

Does anybody have any idea why CPU idle temps can vary by 3 or 4 deg. C on different boot-ups?
Is it a bug of some form in bios?
For some strange reason my idle temps seem to fluctuate between either 32/33 deg. C or 35/36 deg. C. That temp stays fairly constant and will remain until next boot which may or may not have the lower or higher idle temp readings in both corecenter & NVIDIA MonitorView.
The boot temp also seems to affect the "under Load" temp higher limit by the same amounts (38/39 deg. C vice 41 deg. C).
The reason why I'm worrying about it at all is that I'm wondering if the board is reporting correct temps or if it's just making it up as it goes along.....
Thanks in advance for any thoughts you might have.

I agree here, i dont know what CPU you are running or the MOBO you have since you didnt post it. Your temps seem fine from what you say, as for your fluxuation i would say that maybe your room temp has something to do with it, or maybe its a certain time of the day that the sun shines in your room and rases the temp a little bit. I dont think that your computer just makes it up as it goes...if it says the temp...its most likley the temp. I can simithise with you on wanting to know about temp, im constantly monitoring mine, but i have to say like abouve its not broke...dont fix it, or you might be fixing your whole computer.
GL

CISCO 2941-DC router, acceptable CPU utilization percentage

What is the maximum acceptable CPU Utilization percentage for a CISCO MWR 2941-DC router that is not prone to errors?

There is no specific percent given for CPU utilization that is not prone to errors.

CPU idle showing 0%

Hi all,
We are maintaining 10.1.0.4.0 database in Linux Server,4 processor CPU. Always I am getting CPU idle time near to 0%. In some times when the developers trying to connect to DB they are getting the error "Unable to allocate 27338m shared memory" and unable to connect to DB. Even if they connect to DB, they are getting slow response.
Please let me know what could be the problem, and how can i resolve this. From last 3 days developers are pinning me.
Thanks in advance
Mahi

Hi Sudhir and Alok,
The below is the error message developers are getting--
ORA-04031: unable to allocate 23788 bytes of shared memory ("shared pool","unknown object","sga heap(1,0)","session parame")
Below are the some line from alert.log file
Errors in file /home/oracle/admin/orcl/udump/orcl_ora_7033.trc:
Tue Apr 3 15:24:17 2007
sdtcs_getexecname: ignored overriding value [oracleorcl]
Tue Apr 3 15:24:18 2007
sdtcs_getexecname: ignored overriding value [oracleorcl]
Tue Apr 3 15:24:19 2007
sdtcs_getexecname: ignored overriding value [oracleorcl]
Tue Apr 3 15:24:19 2007
sdtcs_getexecname: ignored overriding value [oracleorcl]
Tue Apr 3 15:24:20 2007
sdtcs_getexecname: ignored overriding value [oracleorcl]
Tue Apr 3 15:24:20 2007
sdtcs_getexecname: ignored overriding value [oracleorcl]
Tue Apr 3 15:24:20 2007
sdtcs_getexecname: ignored overriding value [oracleorcl]
Tue Apr 3 15:24:21 2007
sdtcs_getexecname: ignored overriding value [oracleorcl]
Tue Apr 3 15:24:21 2007
sdtcs_getexecname: ignored overriding value [oracleorcl]
Please check these and help me.
Thanks in advance
Mahi

How do I limit the user creat new connect when CPU idle 5%?

my oracle database is 9.2.0.7,
I want to limited the new connection by created when the server (sun solars 5.9) cpu idle <5 % ?

> I want to limited the new connection by created when the server (sun solars 5.9) cpu idle <5 % ?
This makes absolutely no sense at all. Not even borderline idiotic - it has invaded the land of idiots looking to conquer and become the biggest one of them all. :-)
But there is actually a very easy way to do it. Outside the database in a script, run uptime. It provides the system load averages for the past 1, 5, and 15 minutes. Use awk to extract these load numbers and use that to make the decision whether connectivity can be allowed or must be denied.
Next check if the Oracle Listener is up. If up and connectivity must be denied, shut it down. If down and connectivity must be allowed, start it. Else, leave it as is.
Then sleep for a few minutes and repeat.
To make this into a proper daemon, you can simply add it to /etc/inittab and have the kernel running it for you and respawning it when it runs into a problem and dies.

Cpu idle time is 2%

when i saw the st06 at the time of peak hours in the business the cpu idle time is below 30%

Hi ,
you need to check the process which are running on SAP system.
1-You get this info by ST06-> TOP CPU
2-or from OS level via windows->task manager and see the process which are using high CPU execution time
In case of the process which are not from SAP, then you have to contact your OS network team, eg If you see any antivirus process consuming a lot of time.
Pls Fete points if useful .
Regards,
M.A

Find CPU idle time

Can anybody help me out in finding the cpu time or cpu usage percentage for a particular process in windows xp environment.
Any suggestion should be of a great help.
Thanks
Muthu

Can this found using java??Nope.
This is an OS specific question (Windows XP in your case).
Java cannot be useful in this area.
As already mentioned maybe the best way is to search at msdn.microsoft.com and google groups with appropriate keywords.
My experience with your specific issue is to use the WMI (Windows Management Instrumentation) Performance Counter Win32 Classes components which are a set of COM objects (available on NT/2K/XP/2K3/Vista) that allows to do all sort of administrative tasks with the OS.
One of these classes ([url http://msdn.microsoft.com/library/en-us/wmisdk/wmi/win32_perfrawdata_perfproc_process.asp?frame=true]Win32_PerfRawData_PerfProc_Process class) is a performance counters that monitor running application program and system processes.
You should have a look at this post to know how to use this class:
http://groups.google.com/group/microsoft.public.win32.programmer.wmi/msg/ac8691a2f885f29e
By the way the microsoft.public.win32.programmer.wmi group is a good start to read/ask questions about WMI related issues.
To integrate your WMI solution with Java you have at least two solutions:
1- ( This is the simple solution. ) Create your vbs script (see the post above) then use Runtime.exec() to execute it and retrieve the appropriate information.
2- Use [url http://sourceforge.net/projects/jacob-project/]JACOB or any other Java COM bridge to instanciate and use
the COM object to retrieve the appropriate information.
Regards

CPU idle is 8 ,lower than 20

cpu idle is 0 ,lower than 20
14889 35.7 1519480 1483640   orashp 08:01:05 oracleSHP (DESCRIPTION=(LOCAL=NO)(SDU=32768))
14878 27.2 1516224 1485264   orashp 08:00:29 oracleSHP (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
18467 1.5 1525744 1476680   orashp   Aug_23 ora_lgwr_SHP
14875 1.1 67616 56072   orashp 08:00:10 brconnect -u / -jid STATS20080904080000 -c -f stats -t ALL
    3 0.3    0    0     root   Apr_30 fsflush
14933 0.3 4152 2976     root 08:04:37 /usr/local/sbin/sshd -R

Hi Fidel,
SAP run program RSDBAJOB this time.
Follow is our oracle parameters:
*._b_tree_bitmap_plans=FALSE
*._optimizer_or_expansion='depth'
*._push_join_predicate=FALSE
*.aq_tm_processes=1
*.background_dump_dest='/oracle/SHP/saptrace/background'
*.compatible='9.2.0.0.0'
*.control_file_record_keep_time=30
*.control_files='/oracle/SHP/sapdata/cntrl/cntrlSHP01.ctl','/oracle/SHP/sapdata/cntrl/cntrlSHP02.ctl','/oracle/SHP/sapdata/cntrl/cntrlSHP03.ctl'
*.core_dump_dest='/oracle/SHP/saptrace/background'
*.db_block_size=8192
*.db_cache_size=838860800
*.DB_DOMAIN='WORLD'
*.db_file_multiblock_read_count=8
*.db_files=1024
*.db_name='SHP'
*.dml_locks=6250
*.enqueue_resources=8000
*.event='10028 trace name context forever, level 1','10027 trace name context forever, level 1','10183 trace name context forever, level 1','10191 trace name context forever, level 1','38068 trace name context forever, level 100'
*.fal_client='SHP_std'
*.fast_start_mttr_target=300
*.hash_join_enabled=false
*.instance_name='SHP'
*.java_pool_size=0
*.job_queue_processes=10
*.large_pool_size=20971520
*.log_archive_dest_1='location=/oracle/SHP/saparch'
*.log_archive_dest_2='service=SHP_std optional reopen=60 max_failure=10 delay=1440'
*.log_archive_format='SHP_%s.arc'
*.log_archive_start=TRUE
*.log_buffer=8192000
*.log_checkpoints_to_alert=true
*.open_cursors=800
*.optimizer_features_enable='9.2.0'
*.optimizer_index_cost_adj=10
*.pga_aggregate_target=419430400
*.processes=150
*.query_rewrite_enabled='FALSE'
*.remote_os_authent=true
*.replication_dependency_tracking=false
*.shared_pool_size=524288000
*.sort_area_size=2097152
*.star_transformation_enabled='FALSE'
*.timed_statistics=TRUE
*.transaction_auditing=false
*.undo_management='AUTO'
*.undo_retention=10800
*.undo_tablespace='PSAPROLL'
*.user_dump_dest='/oracle/SHP/saptrace/usertrace'
*.utl_file_dir='/oracle/SHP/saptrace/usertrace'
Thanks!
Lily

CPU Idling during encode in Adobe Media Encoder - why?

Wonder if anyone can shed some light on this for me.
Basically, just encoding a very short video in Adobe Media Encoder (AME) and it's not taking too long but I happened to notice that my CPU activity was a bit idle despite it performing this task. Surely, it should have devoted a bit more energy to the encode ad got the job done sooner?
Here's a screen grab to explain:
Anyway, if anyone can advise why this is the case and whether it is normal or abnormal behaviour it would be really helpful.
Many thanks,
Alex

This could depend on a lot things. Colorista and Looks, for example are processed on the GPU (using OpenGL, not CUDA), and can definitely create a bottleneck for the CPU.

System load average over 1.5 while cpu idle

Running 10.9.4. My load averages are continuously around 1.5 or higher while my cpu is around 95% idle, no apps running, I've just rebooted and logged in. This is very common now for my machine. Any suggestions? Thanks

On Unix systems that are idle I generally see near-zero load averages. I would expect OS X to be in that general vicinity and seem to recall seeing near-zero numbers in the past when the system is idle.

KM2M Combo - 16 degrees CPU idle?!

OK, I'm confused. Both BIOS and pcAlert 4 shows that I have an idle temp on about 16 degrees C. With the board just laying on the floor without a case (I want to test it thoroughly before I go to all the trouble it is to mount it in my custom built metal suitcase). The temp on the floor is around 20 degrees, so that CPU temp is impossible, right?
I got the mobo yesterday for MP3 use in my car (it will replace a Celeron 433, so it's a big step up...). On it I use a 1,2 duron and SDRAM, so you might call it underclocked. And there's a Cooler Master of the Hoover type (noisy, if you get my drift) But still, this is impossible. Or is it? If it's correct, I'm hysterical. Then I won't have to worry about overheating when it's in my car!
And talk about boot times! I'm down to about 10 seconds from hibernation and less than 30 from cold start, and this is on WinXP with networkdrivers! 8)

THe Km2m doesnt have a little sensor inside the cpu socket to read the temps which can result that the motherboard can't display the temperature because theres no sensor to measure the temps from. If you had an XP processor then it would read temps just fine because it has a internal sensor.
-rob

Top or sar ??? both shows different cpu idle%

hello all,
I know this is not a oracle related topic, but its related to performance issue on the server. I am using top and sar cmd find the top user session...but i actually found this...using the top cmd it shows me that my cpu is about 97% idle.....but using the sar cmd...sar -u to check for cpu stuff....it shows my cpu is about only 20% idle....and i actually ran the cmd about teh same time...from 2 different putty session....now that make me confused...which one is the right on ??
here is the top cmd (97% cpu idel)
Cpu states:
CPU   LOAD   USER   NICE    SYS   IDLE BLOCK SWAIT   INTR   SSYS
0    0.05   2.2%   0.0%   2.0% 95.8%   0.0%   0.0%   0.0%   0.0%
1    0.05   0.4%   0.0%   0.0% 99.6%   0.0%   0.0%   0.0%   0.0%
2    0.06   3.0%   0.0%   3.6% 93.4%   0.0%   0.0%   0.0%   0.0%
3    0.05   2.4%   0.0%   1.0% 96.6%   0.0%   0.0%   0.0%   0.0%
4    0.05   2.2%   0.0%   0.8% 97.0%   0.0%   0.0%   0.0%   0.0%
5    0.06   1.0%   0.0%   0.8% 98.2%   0.0%   0.0%   0.0%   0.0%
6    0.05   0.4%   0.0%   2.4% 97.2%   0.0%   0.0%   0.0%   0.0%
7    0.06   1.4%   0.0%   0.4% 98.2%   0.0%   0.0%   0.0%   0.0%
avg   0.05   1.6%   0.0%   1.4% 97.0%   0.0%   0.0%   0.0%   0.0%and here is the sar cmd which was ran at the same time and it should cpu is about only 20% idle...
$ sar -u 5 5
HP-UX XXXXXXXXX B.11.23 U ia64    07/20/09
08:19:32    %usr    %sys    %wio   %idle
08:19:37       2       1      77      19
08:19:43       2       2      79      17
08:19:48       2       4      70      24
08:19:53       2       2      73      24
08:19:58       4       2      78      16
Average        2       2      75      20

sounds just about right....i tried that on a 4 core machine and it looks good...but with all other 8 core it dose not give me right results...i guess sar cmd can only take upto 4 cpu...thanks

Help: MSI GS70 Stealth Pro 210- GPU Enables On CPU Idle?

Hello, my laptop has recently developed an issue where my GTX 870M GPU will activate only when I leave my PC idle for approximately 2-3 minutes. I tried to let the laptop idle and then hover over the GPU activity notification, but as soon as I move my mouse, the GPU deactivates. I also tried to see what process is causing it by leaving my mouse hovering over the Nvidia GPU Activity notification and letting it idle, but the GPU activity window closes before I can see the process. Is anyone else experiencing a similar problem? I do have Kaspersky Pure, so I don't believe it's a virus issue. Any suggestions are well appreciated. Thanks!

Quote from: JakeSully on 08-January-15, 23:51:35
Going to try it on my msi gs70 and update it to you chc and whewlett if it works or not
Update: I can now confirm that it was nvidia experience doing the gpu switching up on idle since once i removed it on my laptop my laptop screen went bit dark and power button stayed white but i did hear cpu or gpu fan do fast noise but went quiet again but nvidia gpu didnt become active this time.
I even also noticed removing this program has even lowered temps on cpu a bit too since cpu temp usually be 45-49c as idle but now it's 41c.
Thanks for the update.

Cpu idle percentage

Similar Messages

Maybe you are looking for