CPU in 13" model
What is the processor in the 13" model (the i5 one)?
I would like to see the exact specs of it from intel's page.
And for future reference, is there any place I can find this infomation?
And when I mean processor, I mean like "i5-380m", so I can find the full info.
I may be wrong, but from what I've learned here, Apple has Intel make them to their specs; unless they've changed that practice, you will not find the information anywhere because they are not "standard". You might ask someone at an Apple store, but I doubt they will have the information. I would guess it to be something Apple does not wish to share to maintain their advantage over competitors.
Similar Messages
-
BOE license model (NUL v/s CPU)
All,
I would like to know if anyone here has a good handle on how BOE licensing works. We are in touch with the BO Account Rep, but also wanted to check here if anyone knew.
We are in the process of converting our existing NUL to CPU-based. Anyone who is a customer with CPU-based license model or SAP folks, can you please confirm if the following points that I understand are true --
a) Web Servers are not counted towards BOE licenses.
b) The calculation of CPUs for multi (dual/quad) core machines is done as: 1 CPU license counted for 1st
CPU, 0.5 CPU license counted for every subsequent CPU on a server.
Thanks!question A: is true, it does not count
question B: not sure
Bryan -
Different cpuspeednw on two different hosts with same cpu config. Why?
Hi,
there are two hosts.
They are different, but have same CPU configuration (I guess it from the output below).
Host1: Solaris 10, 4 cpu, 4 core in each cpu.
psrinfo -v
Status of virtual processor 0 as of: 03/04/2010 08:57:45
on-line since 12/25/2009 11:03:23.
The i386 processor operates at 2133 MHz,
and has an i387 compatible floating point processor.
Status of virtual processor 15 as of: 03/04/2010 08:57:45
on-line since 12/25/2009 11:03:25.
The i386 processor operates at 2133 MHz,
and has an i387 compatible floating point processor.
Host2: CentOS 5.3. Also 4 cpu, 4 cores in each spu
cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Xeon(R) CPU E7320 @ 2.13GHz
stepping : 11
cpu MHz : 2133.413[b]
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca c
mov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm constan
t_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
bogomips : 4270.09
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
processor : 15
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Xeon(R) CPU E7320 @ 2.13GHz
stepping : 11
cpu MHz : [b]2133.413
cache size : 2048 KB
physical id : 6
siblings : 4
core id : 3
cpu cores : 4
apicid : 27
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm constant_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
bogomips : 4266.82
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
QUESTION:
Host1 (Solaris) has cpuspeednw = 700
Host2 (CentOS) has cpuspeednw = 1700
WHY?
What should I do to find out why this is happening?
Edited by: user10944480 on Mar 14, 2010 7:22 AM
Edited by: user10944480 on Mar 14, 2010 7:24 AMuser10944480 wrote:
QUESTION:
Host1 (Solaris) has cpuspeednw = 700
Host2 (CentOS) has cpuspeednw = 1700
WHY?
What should I do to find out why this is happening?
The CPUSPEEDNW is measured in "millions of Oracle operations per second" - but we don't know what "operation" Oracle is using for measuring. Since you have two difference operating systems, it's possible that the "operation" that Oracle uses is one that makes use of the "OSD" (operating system dependant) code and has a very different code path on the two machines that results in a very different speed of completion.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
To post code, statspack/AWR report, execution plans or trace files, start and end the section with the tag {noformat}{noformat} (lowercase, curly brackets, no spaces) so that the text appears in fixed format.
There is a +"Preview"+ tab at the top of the text entry panel. Use this to check what your message will look like before you post the message. If it looks a complete mess you're unlikely to get a response. (Click on the +"Plain text"+ tab if you want to edit the text to tidy it up.)
+"Science is more than a body of knowledge; it is a way of thinking"+
+Carl Sagan+ -
Arch only detecting 1 CPU 1 core instead of 16 processors
EDIT:
It turns out it was a BIOS problem. I flashed to a different BIOS and reset everything to default settings in the BIOS, and now all 16 processors are recognized.
I have a system with an Asus Z8PE-D18 motherboard with 2 Xeon E5520 CPUs. Each CPU has 4 cores and 8 threads, so linux SMP should see 16 processors. But my recent Arch linux install only sees 1 CPU 1 core. Is this a kernel bug, or is something not configured properly? I have another similar machine running Ubuntu that sees all 16 processors, and the only difference I see offhand is that uname -a gives "SMP" but not "SMP PREEMPT" as shown below. Is that significant?
I'm new to Arch linux. What is the best way to try a different kernel without compiling it myself? Any suggestions on a kernel package to try?
# uname -a
Linux server 2.6.33-ARCH #1 SMP PREEMPT Sun Apr 4 10:27:30 CEST 2010 x86_64 Intel(R) Xeon(R) CPU E5520 @ 2.27GHz GenuineIntel GNU/Linux
# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 26
model name : Intel(R) Xeon(R) CPU E5520 @ 2.27GHz
stepping : 5
cpu MHz : 1599.845
cache size : 8192 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc up arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid
bogomips : 3200.01
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
Last edited by ice9 (2010-04-18 07:33:32)EDIT:
It turns out it was a BIOS problem. I flashed to a different BIOS and reset everything to default settings in the BIOS, and now all 16 processors are recognized.
I have a system with an Asus Z8PE-D18 motherboard with 2 Xeon E5520 CPUs. Each CPU has 4 cores and 8 threads, so linux SMP should see 16 processors. But my recent Arch linux install only sees 1 CPU 1 core. Is this a kernel bug, or is something not configured properly? I have another similar machine running Ubuntu that sees all 16 processors, and the only difference I see offhand is that uname -a gives "SMP" but not "SMP PREEMPT" as shown below. Is that significant?
I'm new to Arch linux. What is the best way to try a different kernel without compiling it myself? Any suggestions on a kernel package to try?
# uname -a
Linux server 2.6.33-ARCH #1 SMP PREEMPT Sun Apr 4 10:27:30 CEST 2010 x86_64 Intel(R) Xeon(R) CPU E5520 @ 2.27GHz GenuineIntel GNU/Linux
# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 26
model name : Intel(R) Xeon(R) CPU E5520 @ 2.27GHz
stepping : 5
cpu MHz : 1599.845
cache size : 8192 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc up arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid
bogomips : 3200.01
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
Last edited by ice9 (2010-04-18 07:33:32) -
Hello, photoshop used CPU
system
tried:
change the settings in the performance
put on a clean system
in guest mode
cleaning fonts
I formatted the hard drive and install a clean OS, and only photoshop
install cuba driver,
Some inline Adobe Photoshop Version: 2014.2.0 20140926.r.236 2014/09/26:23:59:59 x64
Operating System: Mac OS 10.10.0
System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3400 MHz
Built-in memory: 32768 MB
Free memory: 13300 MB
Memory available to Photoshop: 30757 MB
Memory used by Photoshop: 69 %
3D Multitone Printing: Disabled.
Windows 2x UI: Disabled.
Highbeam: Disabled.
Image tile size: 1024K
Image cache levels: 6
Font Preview: Disabled
TextComposer: Latin
Display: 1
Main Display
Display Bounds: top=0, left=0, bottom=1440, right=2560
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGLGPUs=1
NumCLGPUs=1
glgpu[0].GLVersion="2.1"
glgpu[0].GLMemoryMB=2048
glgpu[0].GLName="NVIDIA GeForce GTX 680MX OpenGL Engine"
glgpu[0].GLVendor="NVIDIA Corporation"
glgpu[0].GLVendorID=4318
glgpu[0].GLRectTextureSize=16384
glgpu[0].GLRenderer="NVIDIA GeForce GTX 680MX OpenGL Engine"
glgpu[0].GLRendererID=16918308
glgpu[0].HasGLNPOTSupport=1
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.20"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1638 4]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[2048]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
clgpu[0].CLPlatformVersion="1.2 (Sep 20 2014 22:01:02)"
clgpu[0].CLDeviceVersion="1.2 "
clgpu[0].CLMemoryMB=2048
clgpu[0].CLName="GeForce GTX 680MX"
clgpu[0].CLVendor="NVIDIA"
clgpu[0].CLVendorID=16918272
clgpu[0].CLDriverVersion="10.0.43 310.41.05f01"
clgpu[0].CUDASupported=0
clgpu[0].CLBandwidth=3.72251e+10
clgpu[0].CLCompute=96.4744
License Type: Tryout Version
Serial number: Tryout Version
Application folder: /Applications/Adobe Photoshop CC 2014/
Photoshop scratch has async I/O enabled
Scratch volume(s):
Macintosh HD, 1,01T, 585,9G free
Required Plug-ins folder: /Applications/Adobe Photoshop CC 2014/Adobe Photoshop CC 2014.app/Contents/Required/Plug-Ins/
Primary Plug-ins folder: /Applications/Adobe Photoshop CC 2014/Plug-ins/
Installed components:
adbeape.framework adbeape 3.4.0.29366 0.1160850
AdbePM.framework AdbePM 2.2.00.32695 79.558079
AdbeScriptUIFlex.framework AdbeScriptUIFlex 6.3.2.32394 79.550992
adobe_caps.framework adobe_caps 8.0.0.13 1.248010
AdobeACE.framework AdobeACE 2.20.02.33308 79.557478
AdobeAGM.framework AdobeAGM 4.30.41.33308 79.557478
AdobeAXE8SharedExpat.framework AdobeAXE8SharedExpat 3.8.0.32260 79.551013
AdobeAXEDOMCore.framework AdobeAXEDOMCore 3.8.0.32260 79.551013
AdobeBIB.framework AdobeBIB 1.2.03.33308 79.557478
AdobeBIBUtils.framework AdobeBIBUtils 1.1.01 79.557478
AdobeCoolType.framework AdobeCoolType 5.15.00.33308 79.557478
AdobeCrashReporter.framework AdobeCrashReporter 7.0.1
AdobeExtendScript.framework AdobeExtendScript 4.5.5.32401 79.551519
AdobeJP2K.framework AdobeJP2K 1.2.2.33078 79.254012
AdobeLinguistic.framework 20256
AdobeMPS.framework AdobeMPS 5.8.1.33340 79.557676
AdobeOwl.framework AdobeOwl 5.2.4
AdobePDFL.framework AdobePDFL 11.0.0.33336 79.512424
AdobePDFSettings.framework AdobePDFSettings 1.4
AdobePIP.framework AdobePIP 7.2.1.3399
AdobeScCore.framework AdobeScCore 4.5.5.32401 79.551519
AdobeUpdater.framework AdobeUpdater 6.0.0.1452 "52.338651"
AdobeXMP.framework AdobeXMPCore 79.156797 79.156797
AdobeXMPFiles.framework AdobeXMPFiles 79.156797 79.156797
AdobeXMPScript.framework AdobeXMPScript 79.156797 79.156797
ahclient.framework ahclient 1.8.0.31
aif_core.framework AdobeAIF 2014.0.00 2014.0
aif_ocl.framework AdobeAIF 2014.0.00 2014.0
aif_ogl.framework AdobeAIF 2014.0.00 2014.0
amtlib.framework amtlib 8.0.0.122
boost_date_time.framework boost_date_time 8.0.0.0
boost_signals.framework boost_signals 8.0.0.0
boost_system.framework boost_system 8.0.0.0
boost_threads.framework boost_threads 8.0.0.0
Cg.framework NVIDIA Cg
CIT.framework CIT 2.2.6.32411 155804
CITThreading.framework CITThreading_boost 2.2.6.32411 155804
dvaaudiodevice.framework dvaaudiodevice 8.0.0.0
dvacore.framework dvacore 8.0.0.0
dvamarshal.framework dvamarshal 8.0.0.0
dvamediatypes.framework dvamediatypes 8.0.0.0
dvametadata.framework dvametadata 8.0.0.0
dvametadataapi.framework dvametadataapi 8.0.0.0
dvametadataUI.framework dvametadataUI 8.0.0.0
dvaplayer.framework dvaplayer 8.0.0.0
dvatransport.framework dvatransport 8.0.0.0
dvaui.framework dvaui 8.0.0.0
dvaunittesting.framework dvaunittesting 8.0.0.0
dynamiclink.framework dynamiclink 8.0.0.0
ICUConverter.framework ICUConverter 3.61 "gtlib_3.0" "." "16615"
ICUData.framework ICUData 3.61 "gtlib_3.0" "." "16615"
LogSession.framework LogSession 7.2.1.3399
mediacoreif.framework mediacoreif 8.0.0.0
PlugPlugExternalObject.framework 5.0.0.62
PlugPlugOwl.framework PlugPlugOwl 5.2.0.46
UpdaterNotifications.framework UpdaterNotifications 8.0.0.14 "8.0.0.14"
WRServices.framework
Required plug-ins:
3D Studio 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
Accented Edges 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Adaptive Wide Angle 15.2, Copyright © 2014 Adobe Systems Incorporated - from the file “Adaptive Wide Angle.plugin”
Angled Strokes 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Average 2014.2.0 x001 ©1993-2014 Adobe Systems Incorporated - from the file “Average.plugin”
Bas Relief 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
BMP 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Camera Raw 8.6 (254), Copyright © 2014 Adobe Systems Incorporated - from the file “Camera Raw.plugin”
Camera Raw Filter 8.6 (254), Copyright © 2014 Adobe Systems Incorporated - from the file “Camera Raw.plugin”
Chalk & Charcoal 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Charcoal 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Chrome 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Cineon 2014.2.0 x001 ©2002-2014 Adobe Systems Incorporated - from the file “Cineon.plugin”
Clouds 2014.2.0 x001 ©1993-2014 Adobe Systems Incorporated - from the file “Clouds.plugin”
Collada DAE 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
Color Halftone 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Colored Pencil 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
CompuServe GIF 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Conté Crayon 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Craquelure 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Crop and Straighten Photos 2014.2.0 x001 ©2003-2014 Adobe Systems Incorporated - from the file “CropPhotosAuto.plugin”
Crop and Straighten Photos Filter 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Crosshatch 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Crystallize 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Cutout 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Dark Strokes 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
De-Interlace 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Dicom 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “dicom.plugin”
Difference Clouds 2014.2.0 x001 ©1993-2014 Adobe Systems Incorporated - from the file “Clouds.plugin”
Diffuse Glow 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Displace 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Dry Brush 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Eazel Acquire 2014.2.0 x001 ©1997-2014 Adobe Systems Incorporated - from the file “EazelAcquire.plugin”
Embed Watermark NO VERSION - from the file “DigiSign.plugin”
Entropy 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
Export Color Lookup Tables 2014.2.0 x001 ï¿1⁄22012-2014 Adobe Systems Incorporated - from the file “Export3DLUT.plugin”
Extrude 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
FastCore Routines 2014.2.0 x001 ©1990-2014 Adobe Systems Incorporated - from the file “FastCore.plugin”
Fibers 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Film Grain 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Filter Gallery 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Flash 3D 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
Fresco 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Glass 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Glowing Edges 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Google Earth 4 KMZ 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
Grain 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Graphic Pen 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Halftone Pattern 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
HDRMergeUI 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “HDRMergeUI.plugin”
HSB/HSL 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
IFF Format 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
IGES 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
Ink Outlines 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
JPEG 2000 2014.2.0 x001 ©2001-2014 Adobe Systems Incorporated - from the file “JPEG2000.plugin”
Kurtosis 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
Lens Blur 15.2, Copyright © 2002-2014 Adobe Systems Incorporated - from the file “Lens Blur.plugin”
Lens Correction 15.2, Copyright © 2002-2014 Adobe Systems Incorporated - from the file “Lens Correct.plugin”
Lens Flare 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Liquify 15.2, Copyright © 2001-2014 Adobe Systems Incorporated - from the file “Liquify.plugin”
Matlab Operation 2014.2.0 x001 ©1993-2014 Adobe Systems Incorporated - from the file “ChannelPort.plugin”
Maximum 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
Mean 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
Measurement Core 2014.2.0 x001 ©1993-2014 Adobe Systems Incorporated - from the file “MeasurementCore.plugin”
Median 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
Mezzotint 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Minimum 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
MMXCore Routines 2014.2.0 x001 ©1990-2014 Adobe Systems Incorporated - from the file “MMXCore.plugin”
Mosaic Tiles 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Multiprocessor Support 2014.2.0 x001 ©1990-2014 Adobe Systems Incorporated - from the file “MultiProcessor Support.plugin”
Neon Glow 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Note Paper 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
NTSC Colors 2014.2.0 x001 ©1993-2014 Adobe Systems Incorporated - from the file “NTSC Colors.plugin”
Ocean Ripple 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
OpenEXR 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Paint Daubs 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Palette Knife 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Patchwork 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Paths to Illustrator 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
PCX 2014.2.0 x001 ©1989-2014 Adobe Systems Incorporated - from the file “PCX.plugin”
Photocopy 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Photoshop 3D Engine 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “Photoshop3DEngine.plugin”
Photoshop Touch CC 2014 (15.2.0.0) ©1993-2014 Adobe Systems Incorporated - from the file “PSDX.plugin”
Picture Package Filter 2014.2.0 x001 ©1993-2014 Adobe Systems Incorporated - from the file “ChannelPort.plugin”
Pinch 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Pixar 2014.2.0 x001 ©1989-2014 Adobe Systems Incorporated - from the file “Pixar.plugin”
Plaster 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Plastic Wrap 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
PLY 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
PNG 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Pointillize 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Polar Coordinates 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Portable Bit Map 2014.2.0 x001 ©1989-2014 Adobe Systems Incorporated - from the file “PBM.plugin”
Poster Edges 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
PRC 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
Radial Blur 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Radiance 2014.2.0 x001 ©2003-2014 Adobe Systems Incorporated - from the file “Radiance.plugin”
Range 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
Read Watermark NO VERSION - from the file “DigiRead.plugin”
Render Color Lookup Grid 2014.2.0 x001 ï¿1⁄22012-2014 Adobe Systems Incorporated - from the file “Export3DLUT.plugin”
Reticulation 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Ripple 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Rough Pastels 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Save for Web 15.2, Copyright © 1999-2014 Adobe Systems Incorporated - from the file “Save for Web.plugin”
ScriptingSupport 15.2, Copyright © 2014 Adobe Systems Incorporated - from the file “ScriptingSupport.plugin”
Shake Reduction 15.2, Copyright © 2014 Adobe Systems Incorporated - from the file “Shake Reduction.plugin”
Shear 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Skewness 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
Smart Blur 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Smudge Stick 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Solarize 2014.2.0 x001 ©1993-2014 Adobe Systems Incorporated - from the file “Solarize.plugin”
Spatter 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Spherize 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Sponge 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Sprayed Strokes 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Stained Glass 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Stamp 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Standard Deviation 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
STL 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
Sumi-e 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Summation 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
Targa 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Texturizer 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Tiles 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Torn Edges 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Twirl 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
U3D 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
Underpainting 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Vanishing Point 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “VanishingPoint.plugin”
Variance 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
Virtual Reality Modeling Language | VRML 2014.2.0 x001 ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
Water Paper 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Watercolor 15.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Wave 15.2, Copyright © 2003-2014 Adobe Systems Incorporated - fI'm on a new Mackbook Pro 15"
You are still under warranty. Call Apple tech support. -
Hi,
When i watch a movie or myepisodes my xine races my cpu to 100%.
I have tried other video drivers in xine but nontheless.
Some info you guys might need:
- WM: Openbox
- Dual Monitor Setup whit following screens:
a. Samsung Syncmaster 940nw
b. Neovo F-419
lspci -v
02:00.0 VGA Compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
Xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "record"
Load "dri2"
Load "dbe"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 410 260 # mm
Identifier "Monitor0"
VendorName "SAM"
ModelName "SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
Option "PreferredMode" "1440x900"
Option "Primary" "True"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "AGNeovo"
ModelName "F-419"
HorizSync 24-80
VertRefresh 49-75
Option "DMPS"
Option "LeftOf" "Monitor0"
Option "PreferredMode" "1280x1024"
Option "Primary" "False"
EndSection
Section "Device"
Identifier "RV100"
Driver "radeon"
BusID "PCI:2:0:0"
Option "Monitor-VGA-0" "Monitor0"
Option "Monitor-DVI-0" "Monitor1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "syncm"
SubSection "Display"
Modes "1280x1024" "1440x900"
Depth 24
Virtual 2720 1024
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
xrandr
Screen 0: minimum 320 x 200, current 2720 x 1024, maximum 4096 x 4096
VGA-0 connected 1440x900+1280+0 (normal left inverted right x axis y axis) 410mm x 257mm
1440x900 59.9*+ 75.0
1280x1024 75.0 60.0
1280x960 60.0
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
DVI-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 375mm x 301mm
1280x1024 60.0*+ 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
S-video disconnected (normal left inverted right x axis y axis)
I hope this is enough to go on.Not sure if it supports it i've seen ubuntu forums use them and they worked. Not sure if this counts.
Just made this linux box 2 weeks ago it has happend since the start.
Wel cat /proc/cpuinfo gives me:
redostrike ~ $ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.00GHz
stepping : 4
cpu MHz : 1992.410
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm up pebs bts
bogomips : 3986.85
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 32 bits virtual
power management:
Not the best one out there but still it should run good.
vlc, mplayer are even worse the have lots of lags. Havent tried gstreamer yet will look into that.
I've been tweaking my xorg.conf a bit and now i can get a larger screen out of it but the cpu still goes to 100%.
This is the Device section now.
Section "Device"
Identifier "ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]"
Driver "radeon"
Option "ColorTiling" "On"
Option "EnablePageFlip" "On"
Option "DisplayPriority" "BIOS"
Option "RenderAccel" "On"
Option "AccelMethod" "XAA"
Option "XAANoOffScreenPixMaps"
Option "AGPMode" "8"
BusID "PCI:2:0:0"
Option "Monitor-VGA-0" "Monitor0"
Option "Monitor-DVI-0" "Monitor1"
EndSection -
[Solved] Dualcore Macbook using only one cpu
Hello,
I have a dual core macbook running Arch, default installation with default kernel (64bit). I just noticed that I only have one cpu running, even when I do some cpu-intensive work. Here is the output of /proc/cpuinfo:
└─■ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
stepping : 11
cpu MHz : 800.000
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow vnmi flexpriority
bogomips : 4391.55
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
stepping : 11
cpu MHz : 800.000
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow vnmi flexpriority
bogomips : 4390.91
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
which shows two cpus registered to the system, but when I do top, I get the following output:
top - 00:29:07 up 7:33, 0 users, load average: 0.05, 0.05, 0.05
Tasks: 93 total, 2 running, 91 sleeping, 0 stopped, 0 zombie
Cpu(s): 9.0%us, 4.1%sy, 0.2%ni, 86.1%id, 0.7%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 4020236k total, 1386244k used, 2633992k free, 53056k buffers
Swap: 0k total, 0k used, 0k free, 826672k cached
Which tells me I only have one cpu. Am I doing something wrong? I have cpufreq-utils and laptop-mode running, but I don't think it should affect this. The following is the output of cpufreq-info
└─■ cpufreq-info
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to [email protected], please.
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 2.20 GHz
available frequency steps: 2.20 GHz, 2.00 GHz, 1.80 GHz, 1.60 GHz, 1.40 GHz, 1.20 GHz, 800 MHz
available cpufreq governors: ondemand, performance
current policy: frequency should be within 800 MHz and 2.20 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 800 MHz.
analyzing CPU 1:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1
CPUs which need to have their frequency coordinated by software: 1
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 2.20 GHz
available frequency steps: 2.20 GHz, 2.00 GHz, 1.80 GHz, 1.60 GHz, 1.40 GHz, 1.20 GHz, 800 MHz
available cpufreq governors: ondemand, performance
current policy: frequency should be within 800 MHz and 2.20 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 800 MHz.
and it also shows the two cpus, and cpu1 frequency gets higher when I do cpu intensive work, as it should, but cpu0 always stays at 800MHz. Can anybody help me please? Thanks!
Last edited by kcirick (2011-01-24 15:41:21)Thanks foutrelis. I installed htop and monitored my cpu usage. It seems to be in working order. When I mentioned "cpu intensive work", it turned out that I was talking about something that was using average 50% on both cores, and assumed that meant one was at 100% and the other was 0% (I have conky tell me the average cpu usage).
Marking this as solved. Thanks again! -
Only one CPU core recognized [solved]
For some reason the kernel only recognizes one CPU core out of two. I'm not completely sure at which kernel upgrade it disappeared but it is gone in 2.6.36 and 2.6.37. I know it was still there in september 2010 and earlier. I'm using a x86-64 kernel.
cat /proc/cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 6
model name : AMD Athlon(tm) II X2 245 Processor
stepping : 2
cpu MHz : 2913.253
cache size : 1024 KB
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc up rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save
bogomips : 5828.27
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
Motherboard is: Gigabyte MA770T-UD3P. I use the latest bios.
I have tried adding the kernel options "acpi=off noacpi apic=off noapic" as to the suggestion of a ubuntu bug report in launchpad but it didn't help. I also disabled ACPI in the bios but I'm still limited to one cpu core.
Any ideas?
[SOLVED]
I just doublechecked the BIOS settings and it had the CPU Core Control set to manual and one core was disabled. I set it to auto again and now both cores are recognized correctly. I don't recall ever touching this setting but at least it works now. Maybe a bios update actually changed the setting or (more probable) a friend of mine.
Last edited by Baraclese (2011-01-17 19:01:02)JOhnLiu wrote:
thanks for reply sb92075
[root@localhost ~]# mpstat -P ALL 2
Linux 2.6.18-164.el5 (localhost.localdomain) 09/12/12
09:29:09 CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s
09:29:11 all 0.01 0.00 1.27 0.01 0.00 0.01 0.00 98.69 1658.29
09:29:11 0 0.50 0.00 0.00 0.00 0.00 0.50 0.00 98.99 1657.29
09:29:11 73 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:11 74 0.00 0.00 100.00 0.00 0.00 0.00 0.00 0.00 0.00
09:29:11 75 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:11 76 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00I think you don't understand what i mean .
there just have ONLY ONE CORE %sys 100
the top command show average of all cpu core sys% usage
when the one core sys% is 100%
the system are very slow .
e.g: when I create a database instance used for a long time . over 2 hours
but generally it will be done at most 1 hours or shorteris any type of OS virtualization involved in this environment? -
Only one CPU core high sys usage when create database instance via dbca
when using dbca to create database instance
JUST ONLY ONE CPU core high sys usage
how to troubleshoot it
see this:
top - 09:28:19 up 55 days, 20:38, 10 users, load average: 1.00, 1.08, 1.31
Tasks: 1231 total, 2 running, 1228 sleeping, 0 stopped, 1 zombie
Cpu(s): 0.0%us, 1.3%sy, 0.0%ni, 98.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 57588328k total, 55028620k used, 2559708k free, 196852k buffers
Swap: 16386292k total, 23156k used, 16363136k free, 23011232k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
11343 oracle 25 0 1771m 30m 23m R 99.7 0.1 5:36.39 oracle
3692 oracle 16 0 13948 2348 816 S 1.6 0.0 17:00.94 top
11432 root 15 0 13540 2024 820 R 1.3 0.0 0:00.21 top
11034 oracle 16 0 737m 171m 33m S 0.3 0.3 0:52.39 java
11435 oracle 15 0 66056 1596 1180 S 0.3 0.0 0:00.01 bash
1 root 15 0 784 172 160 S 0.0 0.0 38:56.76 init
2 root RT -5 0 0 0 S 0.0 0.0 0:00.58 migration/0
3 root 34 19 0 0 0 S 0.0 0.0 0:00.75 ksoftirqd/0
4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0
5 root RT -5 0 0 0 S 0.0 0.0 0:00.81 migration/1
6 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/1
7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1
8 root RT -5 0 0 0 S 0.0 0.0 0:02.53 migration/2 mpstat info
[root@localhost ~]# mpstat -P ALL 2
Linux 2.6.18-164.el5 (localhost.localdomain) 09/12/12
09:29:09 CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s
09:29:11 all 0.01 0.00 1.27 0.01 0.00 0.01 0.00 98.69 1658.29
09:29:11 0 0.50 0.00 0.00 0.00 0.00 0.50 0.00 98.99 1657.29
09:29:11 73 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:11 74 0.00 0.00 100.00 0.00 0.00 0.00 0.00 0.00 0.00
09:29:11 75 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:11 76 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:11 77 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:11 78 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:11 79 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:11 CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s
09:29:13 all 0.01 0.00 1.26 0.01 0.00 0.02 0.00 98.70 1761.19
09:29:13 0 0.50 0.00 0.50 1.00 0.00 1.99 0.00 96.02 1761.19
09:29:13 71 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:13 72 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:13 73 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:13 74 0.00 0.00 100.00 0.00 0.00 0.00 0.00 0.00 0.00
09:29:13 75 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:13 76 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:13 77 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:13 78 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:13 79 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00 you can see there is only one CPU CORE (core 74 but is random , other core have same status but just one CPU core)
[root@localhost ~]# vmstat -S m 2
procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------
r b swpd free buff cache si so bi bo in cs us sy id wa st
3 0 23 1861 203 24267 0 0 8 12 0 0 0 0 99 0 0
4 0 23 1845 203 24262 0 0 602 16460 3682 8121 2 2 96 1 0
3 0 23 1842 203 24276 0 0 692 7520 3297 6610 2 2 97 0 0
3 0 23 1830 203 24277 0 0 786 3040 3302 7118 2 2 97 0 0
4 0 23 1829 203 24277 0 0 126 3144 3247 7343 2 1 97 0 0
3 0 23 1827 203 24279 0 0 76 2944 3292 7502 2 2 96 0 0
3 0 23 1823 203 24281 0 0 0 3248 3164 7656 2 1 97 0 0
2 0 23 1827 203 24279 0 0 0 3646 3080 7480 2 1 97 0 0
2 0 23 1828 203 24279 0 0 0 476 2942 5648 1 1 98 0 0
3 0 23 1824 203 24281 0 0 2 7476 3377 8111 2 2 97 0 0iostat infor
avg-cpu: %user %nice %system %iowait %steal %idle
1.28 0.00 1.29 0.00 0.00 97.43
Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn
hda 0.00 0.00 0.00 0 0
sda 5.47 0.00 83.58 0 168
sda1 0.00 0.00 0.00 0 0
sda2 5.47 0.00 83.58 0 168
sda3 0.00 0.00 0.00 0 0
sda4 0.00 0.00 0.00 0 0
sda5 0.00 0.00 0.00 0 0
sdb 8.96 0.00 123.38 0 248
sdb1 8.96 0.00 123.38 0 248
avg-cpu: %user %nice %system %iowait %steal %idle
1.27 0.00 1.27 0.00 0.00 97.46
Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn
hda 0.00 0.00 0.00 0 0
sda 0.00 0.00 0.00 0 0
sda1 0.00 0.00 0.00 0 0
sda2 0.00 0.00 0.00 0 0
sda3 0.00 0.00 0.00 0 0
sda4 0.00 0.00 0.00 0 0
sda5 0.00 0.00 0.00 0 0
sdb 17.50 0.00 236.00 0 472
sdb1 17.50 0.00 236.00 0 472
avg-cpu: %user %nice %system %iowait %steal %idle
1.29 0.00 1.30 0.01 0.00 97.41
Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn
hda 0.00 0.00 0.00 0 0
sda 0.50 0.00 16.00 0 32
sda1 0.00 0.00 0.00 0 0
sda2 0.50 0.00 16.00 0 32
sda3 0.00 0.00 0.00 0 0
sda4 0.00 0.00 0.00 0 0
sda5 0.00 0.00 0.00 0 0
sdb 7.50 0.00 144.00 0 288
sdb1 7.50 0.00 144.00 0 288more detail:
database version 11.2.0.2.0
system version
[root@localhost ~]# cat /etc/issue
Red Hat Enterprise Linux Server release 5.4 (Tikanga)
Kernel \r on an \m
[root@localhost ~]# lsb_release
LSB Version: :core-3.1-amd64:core-3.1-ia32:core-3.1-noarch:graphics-3.1-amd64:graphics-3.1-ia32:graphics-3.1-noarch
[root@localhost ~]# uname -a
Linux localhost.localdomain 2.6.18-164.el5 #1 SMP Tue Aug 18 15:51:48 EDT 2009 x86_64 x86_64 x86_64 GNU/Linuxhardware info
vendor_id : GenuineIntel
cpu family : 6
model : 47
model name : Intel(R) Xeon(R) CPU E7- 4860 @ 2.27GHz
stepping : 2
cpu MHz : 2261.057
cache size : 24576 KB
physical id : 3
siblings : 20
core id : 18
cpu cores : 10
apicid : 229
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx pdpe1gb rdtscp lm constant_tsc ida nonstop_tsc pni monitor ds_cpl vmx smx est tm2 cx16 xtpr popcnt lahf_lm
bogomips : 4522.11
clflush size : 64
cache_alignment : 64
address sizes : 44 bits physical, 48 bits virtual
[root@localhost ~]# free -m
total used free shared buffers cached
Mem: 56238 55892 346 0 196 23645
-/+ buffers/cache: 32050 24188
Swap: 16002 22 15979
[root@localhost ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 19G 4.9G 14G 27% /
/dev/sda5 230G 27G 192G 12% /home
/dev/sda1 99M 12M 83M 13% /boot
/dev/sdb1 2.9T 2.3T 464G 84% /arrayEdited by: JOhnLiu on Sep 11, 2012 7:31 PMJOhnLiu wrote:
thanks for reply sb92075
[root@localhost ~]# mpstat -P ALL 2
Linux 2.6.18-164.el5 (localhost.localdomain) 09/12/12
09:29:09 CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s
09:29:11 all 0.01 0.00 1.27 0.01 0.00 0.01 0.00 98.69 1658.29
09:29:11 0 0.50 0.00 0.00 0.00 0.00 0.50 0.00 98.99 1657.29
09:29:11 73 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:11 74 0.00 0.00 100.00 0.00 0.00 0.00 0.00 0.00 0.00
09:29:11 75 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
09:29:11 76 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00I think you don't understand what i mean .
there just have ONLY ONE CORE %sys 100
the top command show average of all cpu core sys% usage
when the one core sys% is 100%
the system are very slow .
e.g: when I create a database instance used for a long time . over 2 hours
but generally it will be done at most 1 hours or shorteris any type of OS virtualization involved in this environment? -
T440s - i7-4600U CPU - ONLY ONE core operating :((
Hi,
I am an owner of Thinkpad T440s ultrabook, which has Intel i7 4600U CPU installed (exact model is 20AQ006BMC - the one with GeForce 730M graphic card).
Regarding to the documentation on Intel website, this CPU should have 2 cores and 4 threads (Hyperthreading). But when I start CPU-Z utility, it shows me, that I have only one core and two threads available. Same thing displays my process manager in Windows 8.1 - 1 core and 2 logical processors.
Any ideas, what could cause this problem?
Thank you.
Link to image 1
Link to image 2
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums
Solved!
Go to Solution.I have found review of exact same model (as I know, they differ in few other details like 3G modem etc.): http://www.notebookcheck.net/Lenovo-ThinkPad-T440s-20AQ006BGE-Ultrabook-Review-Update.120211.0.html
And there is also screenshot from CPU-Z utility and there it shows correctly 2 cores and 4 threads:
So any idea, what could be an issue? Should I use warranty service? because it looks to me like a broken CPU -
Kernel showing 1 cpu only in duo core 2 [SOLVED]
hey, I've search for help but all I get in hyperthreading..
Intel says it's multi-core(dualcore)
$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz
stepping : 6
cpu MHz : 2000.139
cache size : 4096 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc up arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow
bogomips : 4001.95
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
is this info right??
Last edited by funkmuscle (2010-11-03 11:42:28)lilsirecho wrote:
This is my computer dats....Post yours...
o
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 6
model name : Intel(R) Pentium(R) D CPU 2.80GHz
stepping : 4
cpu MHz : 2800.055
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 6
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts pni dtes64 monitor ds_cpl est cid cx16 xtpr pdcm lahf_lm
bogomips : 5602.44
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 6
model name : Intel(R) Pentium(R) D CPU 2.80GHz
stepping : 4
cpu MHz : 2800.055
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 6
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts pni dtes64 monitor ds_cpl est cid cx16 xtpr pdcm lahf_lm
bogomips : 5602.41
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:
[root@n6re ~]#
I did post at the start of this thread:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz
stepping : 6
cpu MHz : 2000.139
cache size : 4096 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc up arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow
bogomips : 4001.95 -
[SOLVED]KVM error for Intel CPU
KVM: entry failed, hardware error 0x80000021
If you're running a guest on an Intel machine without unrestricted mode
support, the failure can be most likely due to the guest entering an invalid
state for Intel VT. For example, the guest maybe running in big real mode
which is not supported on less recent Intel processors.
It is OK for WinXP/Linux guest run at text, but it failed after entering graphic mode. How to resolve this problem, thansk very much
Name : qemu
Version : 1.4.0-2
uname -a
Linux myserver 3.7.10-1-ARCH #1 SMP PREEMPT Thu Feb 28 09:59:14 CET 2013 i686 GNU/Linux
cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 14
model name : Intel(R) Core(TM) Duo CPU U2500 @ 1.20GHz
stepping : 12
microcode : 0x54
cpu MHz : 1197.091
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon bts aperfmperf pni monitor vmx est tm2 xtpr pdcm dtherm
bogomips : 2395.93
clflush size : 64
cache_alignment : 64
address sizes : 32 bits physical, 32 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 14
model name : Intel(R) Core(TM) Duo CPU U2500 @ 1.20GHz
stepping : 12
microcode : 0x54
cpu MHz : 1197.091
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon bts aperfmperf pni monitor vmx est tm2 xtpr pdcm dtherm
bogomips : 2395.93
clflush size : 64
cache_alignment : 64
address sizes : 32 bits physical, 32 bits virtual
power management
Last edited by netawater (2013-08-07 00:55:06)with code tags that post looks a lot better, netawater.
The lscpu output shows that virtualization is enabled four your system (didn't really doubt that, but wanted to be sure).
Trying to break down your qemu start command to make clearer which options you use :
(You can use multiple-line commands by ending each line with a / )
/usr/bin/qemu-system-i386 /
-name NewWinXP /
-S /
-M pc-i440fx-1.4 /
-enable-kvm /
-m 1024 /
-smp 1,sockets=1,cores=1,threads=1 /
-uuid b1e25e7e-7a2a-eded-13da-994512cc8898 /
-no-user-config /
-nodefaults /
-chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/NewWinXP.monitor,server,nowait /
-mon chardev=charmonitor,id=monitor,mode=control /
-rtc base=localtime /
-no-shutdown /
-device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 /
-drive file=/usr/local/virtimages/WinXP.img,if=none,id=drive-ide0-0-0,format=qcow2 /
-device ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 /
-drive file=/usr/local/virtimages/Tools.img,if=none,id=drive-ide0-0-1,format=qcow2 /
-device ide-hd,bus=ide.0,unit=1,drive=drive-ide0-0-1,id=ide0-0-1 /
-netdev tap,fd=23,id=hostnet0 /
-device rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:ff:8c:ee,bus=pci.0,addr=0x3 /
-chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 /
-device usb-tablet,id=input0 /
-vnc 127.0.0.1:0 /
-k en-us /
-vga std /
-device ES1370,id=sound0,bus=pci.0,addr=0x4 /
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5
Apart from the fact you use a very specific set of hardware for the VM, i don't see anything special.
A search with duckduckgo lead me to this german blog : virtualisierung-mit-kvm-und-virtuelle-netzwerke-mit-vde .
(section KVM Hardware Error).
The error the blog poster got looks very similar to yours, and was solved by applying a special parameter to the kvm_intel kernel module.
try loading the module with
modprobe kvm_intel emulate_invalid_guest_state=0
and test if that solves the problem.
(it's probably best to rmmod the kvm_intel module before giving the above command) -
Statspackの「CPU time」と「DB CPU」の違い
お世話になっております。
Statspackを取得し調査しているのですが、
下記の二つ項目のtime(s)がまったく一致しません。（桁が異なるほど）
①「Top 5 Timed Events」の「CPU time」
②「Time Model System Stats,SQL ordered by CPU」等の「DB CPU」
この二つの項目はSQLに使用したCPU時間だと考えていました。
定義の違いをご存知の方がいらっしゃいましたら、教えていただけないでしょうか。
以上、宜しくお願い致します。こんにちは。
英語記事ですが･･･
http://www.dba-oracle.com/m_db_cpu.htm
元ネタ
https://kr.forums.oracle.com/forums/thread.jspa?threadID=665376 -
Hello,sorry for my bad english, I have a Lenovo b590 laptop essentials that work very well but I did upgrade to Intel Core I5 3210m. Initially with Pentium 2020m. The upgrade was done professionally, all goes well, is recognized by the BIOS, enter windows ... etc ... Works great but after 30 minutes fix closes without any error message, I'm desperate I did update the bios, I reinstalled windows and nothing. I'm desperate ... please help me. (( ((((( The Temp are OK 45C (
Solved!
Go to Solution.hi Reichtofer,
Your friend is probably right. In this pdf info sheet, the B590 supports the following CPU:
HM77 based models − Intel® Core™ i3
HM77 based models − Intel® Core™ i5
HM70 based models − Intel® Pentium®
HM70 based models − Intel® Celeron®
HM70 CPU/Chipset Compatibility list
HM77 CPU/Chipset Compatibility list
It looks like you really need to change the motherboard to an HM77 chipset for the CPU to work properly.
Also, although the HM77 chipset does support both the Intel Pentium Dual-Core Mobile 2020M, Intel Core i5-3210M and other various CPU on the list above, looking at page 85 of the hardware maintenance manual, it seems like the BIOS is "restricted" to only use the following CPU:
- Link to picture
In this case, there's no official way on how to remove the restriction as this is by design and you may need to do as what your friend suggested.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
/proc/cpuinfo shows only 1 core on dual-core CPU [SOLVED]
I've recently gone from Arch i686 to Arch x86_64, and now /proc/cpuinfo shows only one core even though it's a dual-core CPU.
cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz
stepping : 6
cpu MHz : 2266.542
cache size : 3072 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc up arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi flexpriority
bogomips : 4534.96
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
Have anyone experienced similar problems on x86_64?
Could it possibly be a kernel related error?
/AcId
Last edited by AcId (2010-09-08 21:33:27)dmesg shows some iterensting info about "Unsupported number of siblings" ?
dmesg | grep CPU:
SMP: Allowing 1 CPUs, 0 hotplug CPUs
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88832 r8192 d21760 u2097152
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
CPU: Unsupported number of siblings 2
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
weird, boot CPU (#0) not listed by the BIOS.
Brought up 1 CPUs
Maybe you are looking for
-
Syncing is just not working with Apps
I have 145 apps. When I sync, they are placed maybe one per page... total of 11 pages. (this in Itunes 10.1). I have upgraded to OS4.2. The last 3 pages in Itunes are gray, so those do NOT appear in the Iphone. I have done the restriction thing, it w
-
Maximum contacts in palm desktop 6
I'm trying to import my contacts into Palm desktop... I have about 650 contacts - what's the max I can import? Can I split up the file and import smaller chunks at once? Post relates to: Treo 650 (Unlocked GSM)
-
How to organize Excel files inside Numbers, PPT files inside Keynote?
Hi. I have the Dropbox app on my iPad. In here I have some PPT and XLS files. How can I ensure that when I try to open them, they open inside Keynote and Numbers respectively? I guess I'm just trying to know if there's something like "Finder" on an i
-
Downloading and installing WM Player
Hi, I have a mac mini and downloaded the .bin and .hex fiel of the installer of WM Player from the Microsoft site. But everytime I start the program it can not find the correct installation software and opens the excel software. Anybody know how I ca
-
Hi Gurus.... When we execute T. Code J1ID, in it we can change everything....like Permanent Account No...etc.. But I want it...Display Only.... It has another T. Code for it....or any idea for it... Plz Help.... Edited by: Prince Kumar on Feb 12, 200