Cpu is too old for this kernel

I downloaded and burned Arch No Panic ISO before 5:00 am today, then I went to the train and started travelling to my parents, it took about 10 hours. Now I am in their house and I wanted to install brand fresh new Arch Linux on my old K6-2 500. All I saw (after many dots) was:
cpu is too old for this kernel
WHY????
686 is not enough today? for installation?
PS. could you recommend small distro with gcc and SDL and Mesa? Slackware? Ubuntu? OK, let's get serious, Slackware?

I know k6-2 is an i586 family processor, but there are two problems, first the name, beacause of the 6 in k6, it can make suppose that k6 means i686. but the main problem is the fact that the official_Arch_Linux_Install_Guide at http://wiki.archlinux.org/index.php/Off … tall_Guide says something like this:
Pre-Installation
Arch Linux is optimized for the i686 processor and therefore will not run on any lower or incompatible generations of x86 CPUs (i386,i486,i586). A Pentium II or AMD K6-2 processor or higher is required. x86-64 architectures are also officially supported.
"A Pentium II or AMD K6-2 processor or higher is required"
now, there are two options: the official guide is wrong, or you would have to be able to install on a k6-2 microprocessor even if it is an i586 one. if is the secon opcion the question is "how?" because i thry to install arch on a k6-2 500mhz with the same result: "cpu is too old for this kernel"

Similar Messages

I am too old for this

I can't open a disk that has photos stored on it. The error message is:"Invalid jpeg marker." Other disks work fine.

The title of this post "I am too old for this" reminded me of someone that used to post to the Photoshop forum.
Still around but under another name.
"My user ID, Tai Lao, is just a phrase that means Too Old in Mandarin, and my signature, Wo Tai Lao Le, 我太老了, just reads I am Too Old in Mandarin too,"

My Ipod 5 broke a while ago and I just managed to get a new one. However, when I tried to do a backup to configure it, a window popped up saying it wasn't possible because this devide's iOS version is too old for this backup... what do I do??

How can I do a backup now if I can't even access this new device to update its iOS version? And if I just select the option of configuring it as a new Ipod so I can update it, will it still be possible for me to download the previous device's backup on it later? I'd hate to lose everything.

That error message means that your new iPod is not fully updated. Update the new iPod and then restore from the backup of your old iPod.

"Download ITunes 10 now." My Mac is too old for this new program...but I can't get by it. Advice??

But I cannot get past the Download page....and it won't let me purchase anything. Advice?

Try this version: iTunes 9.2.1, http://support.apple.com/kb/DL1056

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
https://discussions.apple.com/community/windows_software/boot_camp

"Snapshot too old" for a report program

We get "ORA-1555 error: snapshot too old" for a report job, NOT an update job.
We can add rollback segments to the DB.
Why we cannot increase the commit frequency to fix this issue?
Thanks!

> 1. create a big rollback segment. search the web for keyword PSAPROLLBIG.
> 2. convert to PSAPUNDO, as started by others, check SAP note 600141.
> 3. analyze the program and if it is a Z program, ask your program to add more commits in his program.
HI all,
of course Stefan and Eric have already given the right hints here.
But the main point here is not the configuration of the UNDO management.
I know that this kind of problems bears a big mental hurdle in it, which is also difficult to jump over for many supporters.
The notion of Undo/Rollback data beeing used mainly for ROLLBACK actions is unfortunately totally wrong.
The primary and main usage of this data is to deliver the consistent view (as already explained in this thread).
So the single big question here is: why does a single statement of your report needs to visit so many pages from a certain point in time?
In the wast majority of cases this is because the statement is badly tuned.
Maybe there is no appropriate index available.
Or it's just written badly, so that unnecessary data must be read by Oracle.
Maybe the CBO does something wrong which must be checked.
Maybe the data is scattered over too many blocks and clustering them together somehow could help
The core point here is: figure out what causes the statement to touch so many pages and fix that.
Then you are most likely to come over this problem.
All other recommendations, especially the move to automatic undo management: full ack.
But the solution to your problem is to fix your statement.
regards,
Lars

SP2-0614:Server version too low for this feature

Hi,
In the preparation phase for Oracle 9i upgrade, (Step 3.7 - Oracle 9i-Unix upgrade Guide)
we ran @CHECKS.SQL under /oracle/stage/920_64/Disk1/SAP directory
received errors SP2-0614:Server version too low for this feature
ORA-01034:ORACLE not available
Source System: Oracle 8.1.7.4, Kernel 620, HP-UX 11.11 9000/800
I went though Oracle site for this issue and it says, that we need go for patch to resolve this issue. But I am not sure, if this is needed or not. Shall I can continue upgrade without this patch?
Please help me to resolve this issue.
Thanks in advance
Regards
Srinivas

what is parameter value for <compatible> in initSID.ora ?
it should be set to 8.1.7.4

I finished adding my transtions to my timeline. I was having crashing issues so I shut down everything before I rendered the project and now it tells me that the project is unreadable or the file is too new for this version of final cut. What Happened?

I finished adding my transtions to my timeline. I was having crashing issues so I shut down everything before I rendered the project and now it tells me that the project is unreadable or the file is too new for this version of final cut. What Happened?

What Happened?
No way for us to know. But if your system was crashing, there definitely was a problem. The FCE error message you got normally indicates the FCE project file has been corrupted. This probably happened due to whatever caused your system to crash & shutting down the system.
First, make sure your system is running correctly. Then, use the Finder to navigate to /users/yourusername/Documents/Final Cut Express Documents/Autosave Vault and find the most recent backup copy of your FCE project file. Copy the file to your Final Cut Express Documents folder (copy the file, don't just move it). Then double-click the copy to open it in FCE. It should open ok, but will probably not have your most recent edits (transitions). You may have to rebuild the transitions, but at least you will be back in action.

Can't open Project - The file format is too new for this version of the pro

Hi everyone
I have the following Problem with my Final Cut Express: When I try to open a project i get an error message: "The file format is too new for this version of the program". (my FCE is in german, this is the google translation!)
I have already erased all the rendering files, but no luck.
Please Help!

Have you recently reinstalled FCE and forgotten to update it?

Can't open a document I created an hour before with Pages 5.0.1; get message saying my Pages is too old, for me to download 5.0.1

Can't open a document I created an hour before with Pages 5.0.1; get message saying my Pages is too old, for me to download 5.0.1

You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Note: Apple has removed over 90 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

Paging file is too small for this operation to complete.

iTunes wont open. When I click on it, all it says is 'Paging file is too small for this operation to complete. Please help =)

Now it says Aplication Error - The aplication failed to initialize properly (0xc000012d)

Final Cut Pro 6 by Diana Weynard: Format too New FOR THIS VERSION OF APP?

I purchased the book book Final Cut Pro 6 by Diana Weynard and it is a basics book overview of FCP However it comes with CD and I have downloaded the CD to my hard drive and when i open the files in
FINAL CUT PRO 6 it says:
FILES FORMAT IS TOO NEW FOR THIS VERSION OF THE APPLICATION.
I did go to the website and download the updates.
I have upgraded osx to 10.5.5
FCP is at 6.0.4
Quictime Pro 7.55
Whats going on?
I bought this book. And when I try to play the Lessons it says FORMAT TOO NEW FOR THIS VERSION OF APPLICATION?
Are my settings wrong?
I have seen this same thread and now answer. I would appreciate some major help from the top users on here! thanks guys

the projects included with this book were built with and for FCP 6 ... if you do not have FCP 6 then its no good to you.
what version of FCP are you running? with FCP open, choose *Final Cut Pro* menu *> About Final Cut Pro* and see what version it says there in the splash screen

File's format is too new for this version of the application

A project that was edited in FCE on an iMac will not open in FCE on a MacBook Pro. When I try to open it, I receive the error: File's format is too new for this version of the application.
The FCE that was installed on the MacBook Pro is exactly same copy as the one loaded onto the above mentioned iMac -- they were each were installed from the same, Apple Store purchased disk.
Thanks for any help.
-Mike

Hi(Bonjour)!
Did you apply the FCE 4.0.1 update on both machines?
Michel Boissonneault

Host Agent Service critical - Paging file is too small for this operation to complete

Hi all,
at the moment I have the problem that some of my hosts get in the errorstate critical in VMM 2012 SP1.
The error details in VMM are:
Error (2912)
An internal error has occurred trying to contact the hostname server: : .
WinRM: URL: [http://hostname:5985], Verb: [ENUMERATE], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/cimv2/Win32_Service], Filter: [select * from Win32_Service where Name="scvmmagent"]
The paging file is too small for this operation to complete (0x800705AF)
Recommended Action
Check that WS-Management service is installed and running on server hostname. For more information use the command "winrm helpmsg hresult". If hostname is a host/library/update server or a PXE server role then ensure that VMM agent is installed
and running.
On the host i cannot connect to FailoverCluster or Hyper.V Manager. After a restart of the host the Problem is gone and the System is working without any Problems for some days.
The paging file is set to 4GB and the OS is Server 2012.
The hosts have 192GB of RAM.
The configuration of the pagfile didn't change from Windows 2k8R2 to 2012.
I didn't find any Errors in the eventlog. Do you have any idea where to check for that?
Thanks,
Patrick

The hotfix didn't solve the Problem for me either. The WMI crash came again after a couple of weeks.
An additional problem with VDS was detected and the following hotfix was installed:
http://support.microsoft.com/kb/2884597/en-us
Also a problem with Clusterservice was found, sadly MS is tagging this handle leak as "won't fix".
Nevertheless one WMI Instance is still growing...
We are testing a hotfix that so far looks promising. Its a private hotfix only right now. But the file is listed as KB494704 you may want to ask your support engineer to look into it.

The version 2008_1_620 of the Add-on ST-PI is too high for this upgrade

Hi Guru,
I' am doing prepare : upgrade from R/3 entrerprise 47X100 to ECC6.0 SR3.
PREPARE
02)                       Initialization     failed        yes
the checks.log report the following error :
SAPup> WARNING: The version 2008_1_620 of the Add-on ST-PI is too high for this
upgrade (> 2005_1_700).
                To avoid loss of data it is necessary to include the latest avai
lable version for the Add-on
                in the IS_SELECT phase.
                Please refer to Add-on note 69455 for further information.
I can't go on , How can I include the add-on in the upgrade ? the phase for include the add-on upgrade is 04) Extension   but i cannot skip phase 2    ? ! ? !
OSS note 69455 does not contain valid information.
thank's for the answer.
Regards Antonio.

Hi
I got the same error and it actually prevents from getting further, because its treated as an error.
"ERROR: To be able to use ASU Toolbox, your system requires at
       least Support Package Level 8 for the ST-PI software component
       For more information, see the upgrade documentation
WARNING: The version 2008_1_620 of the Add-on ST-PI is too high for this upgrade (> 2005_1_700).
         To avoid loss of data it is necessary to include the latest available version for the Add-on
         in the IS_SELECT phase.
         Please refer to Add-on note 69455 for further information."
2008_1_620 does not have a level 8, so it must be refering to the 2005 version of ST-PI.
Update SAPup.exe (in <upgrade dir>/bin) to newest version.
Regards
Kim
Edited by: Kim Hynek on Mar 30, 2010 11:36 AM
Edited by: Kim Hynek on Mar 30, 2010 11:40 AM

Cpu is too old for this kernel

Similar Messages

Maybe you are looking for